- 24 Feb, 2018 22 commits
-
-
Dou Liyang authored
The early_param() is only called during kernel initialization, So Linux marks the functions of it with __init macro to save memory. But it forgot to mark the parse_no_kvmapf/stealacc/kvmclock_vsyscall, So, Make them __init as well. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: rkrcmar@redhat.com Cc: kvm@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: x86@kernel.org Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Radim Krčmář authored
Guests on new hypersiors might set KVM_ASYNC_PF_DELIVERY_AS_PF_VMEXIT bit when enabling async_PF, but this bit is reserved on old hypervisors, which results in a failure upon migration. To avoid breaking different cases, we are checking for CPUID feature bit before enabling the feature and nothing else. Fixes: 52a5c155 ("KVM: async_pf: Let guest support delivery of async_pf from guest mode") Cc: <stable@vger.kernel.org> Reviewed-by:
Wanpeng Li <wanpengli@tencent.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Sebastian Ott authored
Fix the following sparse warning by moving the prototype of kvm_arch_mmu_notifier_invalidate_range() to linux/kvm_host.h . CHECK arch/s390/kvm/../../../virt/kvm/kvm_main.c arch/s390/kvm/../../../virt/kvm/kvm_main.c:138:13: warning: symbol 'kvm_arch_mmu_notifier_invalidate_range' was not declared. Should it be static? Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Move the kvm_arch_irq_routing_update() prototype outside of ifdef CONFIG_HAVE_KVM_EVENTFD guards to fix the following sparse warning: arch/s390/kvm/../../../virt/kvm/irqchip.c:171:28: warning: symbol 'kvm_arch_irq_routing_update' was not declared. Should it be static? Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Stefan Raspl authored
The 'Total' line looks a bit weird when we have a single event only. This can happen e.g. due to filters. Therefore suppress when there's only a single event in the output. Signed-off-by:
Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Raspl authored
We keep the current logic that sorts all events (parent and child), but re-shuffle the events afterwards, grouping the children after the respective parent. Note that the percentage column for child events gives the percentage of the parent's total. Since we rework the logic anyway, we modify the total average calculation to use the raw numbers instead of the (rounded) averages. Note that this can result in differing numbers (between total average and the sum of the individual averages) due to rounding errors. Signed-off-by:
-
Stefan Raspl authored
Drilldown (i.e. toggle display of child trace events) was implemented by overriding the fields filter. This resulted in inconsistencies: E.g. when drilldown was not active, adding a filter that also matches child trace events would not only filter fields according to the filter, but also add in the child trace events matching the filter. E.g. on x86, setting 'kvm_userspace_exit' as the fields filter after startup would result in display of kvm_userspace_exit(DCR), although that wasn't previously present - not exactly what one would expect from a filter. This patch addresses the issue by keeping drilldown and fields filter separate. While at it, we also fix a PEP8 issue by adding a blank line at one place (since we're in the area...). We implement this by adding a framework that also allows to define a taxonomy among the debugfs events to identify child trace events. I.e. drilldown using 'x' can now also work with debugfs. A respective parent- child relationship is only known for S390 at the moment, but could be added adjusting other platforms' ARCH.dbg_is_child() methods accordingly. Signed-off-by:
-
Stefan Raspl authored
We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by:
-
Stefan Raspl authored
Helps quite a bit reading the code when it's obvious when a method is intended for internal use only. Signed-off-by:
-
Stefan Raspl authored
Te checks for debugfs assumed that debugfs is always mounted at /sys/kernel/debug - which is likely, but not guaranteed. This is addressed by checking /proc/mounts for the actual location. Furthermore, when debugfs was mounted, but the kvm module not loaded, a misleading error pointing towards debugfs not present was given. To reproduce, (a) run kvm_stat with debugfs mounted at a place different from /sys/kernel/debug (b) run kvm_stat with debugfs mounted but kvm module not loaded Signed-off-by: -
Stefan Raspl authored
Entering an invalid regular expression did not produce any indication of an error so far. To reproduce, press 'f' and enter 'foo(' (with an unescaped bracket). Signed-off-by: -
Stefan Raspl authored
When we apply a filter that will only leave child trace events, we receive a ZeroDivisionError when calculating the percentages. In that case, provide percentages based on child events only. To reproduce, run 'kvm_stat -f .*[\(].*'. Signed-off-by:
-
Marc Hartmayer authored
Use '==' for equality checks and 'is' when comparing identities. An example where '==' and 'is' behave differently: >>> a = 4242 >>> a == 4242 True >>> a is 4242 False Signed-off-by:
Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by:
-
Marc Hartmayer authored
If it's clear that the values of a dictionary will be used then use the '.items()' method. Signed-off-by:
-
Marc Hartmayer authored
Use a namedtuple for storing the values as it allows to access the fields of a tuple via names. This makes the overall code much easier to read and to understand. Access by index is still possible as before. Signed-off-by:
-
Marc Hartmayer authored
The 'sortkey' function references a value in its enclosing scope (closure). This is not common practice for a sort key function so let's replace it. Additionally, the function 'sorted' has already a parameter for reversing the result therefore the inversion of the values is unneeded. The check for stats[x][1] is also superfluous as it's ensured that this value is initialized with 0. Signed-off-by:
-
Wanpeng Li authored
Reported by syzkaller: WARNING: CPU: 6 PID: 2434 at arch/x86/kvm/vmx.c:6660 handle_ept_misconfig+0x54/0x1e0 [kvm_intel] CPU: 6 PID: 2434 Comm: repro_test Not tainted 4.15.0+ #4 RIP: 0010:handle_ept_misconfig+0x54/0x1e0 [kvm_intel] Call Trace: vmx_handle_exit+0xbd/0xe20 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xdaf/0x1d50 [kvm] kvm_vcpu_ioctl+0x3e9/0x720 [kvm] do_vfs_ioctl+0xa4/0x6a0 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x25/0x9c The testcase creates a first thread to issue KVM_SMI ioctl, and then creates a second thread to mmap and operate on the same vCPU. This triggers a race condition when running the testcase with multiple threads. Sometimes one thread exits with a triple fault while another thread mmaps and operates on the same vCPU. Because CS=0x3000/IP=0x8000 is not mapped, accessing the SMI handler results in an EPT misconfig. This patch fixes it by returning RET_PF_EMULATE in kvm_handle_bad_page(), which will go on to cause an emulation failure and an exit with KVM_EXIT_INTERNAL_ERROR. Reported-by: syzbot+c1d9517cab094dae65e446c0c5b4de6c40f4dc58@syzkaller.appspotmail.com Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: -
Chao Gao authored
Although L2 is in halt state, it will be in the active state after VM entry if the VM entry is vectoring according to SDM 26.6.2 Activity State. Halting the vcpu here means the event won't be injected to L2 and this decision isn't reported to L1. Thus L0 drops an event that should be injected to L2. Cc: Liran Alon <liran.alon@oracle.com> Reviewed-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
Chao Gao <chao.gao@intel.com> Signed-off-by:
-
Wanpeng Li authored
Reported by syzkaller: pte_list_remove: ffff9714eb1f8078 0->BUG ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/mmu.c:1157! invalid opcode: 0000 [#1] SMP RIP: 0010:pte_list_remove+0x11b/0x120 [kvm] Call Trace: drop_spte+0x83/0xb0 [kvm] mmu_page_zap_pte+0xcc/0xe0 [kvm] kvm_mmu_prepare_zap_page+0x81/0x4a0 [kvm] kvm_mmu_invalidate_zap_all_pages+0x159/0x220 [kvm] kvm_arch_flush_shadow_all+0xe/0x10 [kvm] kvm_mmu_notifier_release+0x6c/0xa0 [kvm] ? kvm_mmu_notifier_release+0x5/0xa0 [kvm] __mmu_notifier_release+0x79/0x110 ? __mmu_notifier_release+0x5/0x110 exit_mmap+0x15a/0x170 ? do_exit+0x281/0xcb0 mmput+0x66/0x160 do_exit+0x2c9/0xcb0 ? __context_tracking_exit.part.5+0x4a/0x150 do_group_exit+0x50/0xd0 SyS_exit_group+0x14/0x20 do_syscall_64+0x73/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 The reason is that when creates new memslot, there is no guarantee for new memslot not overlap with private memslots. This can be triggered by the following program: #include <fcntl.h> #include <pthread.h> #include <setjmp.h> #include <signal.h> #include <stddef.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/ioctl.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> #include <linux/kvm.h> long r[16]; int main() { void *p = valloc(0x4000); r[2] = open("/dev/kvm", 0); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); uint64_t addr = 0xf000; ioctl(r[3], KVM_SET_IDENTITY_MAP_ADDR, &addr); r[6] = ioctl(r[3], KVM_CREATE_VCPU, 0x0ul); ioctl(r[3], KVM_SET_TSS_ADDR, 0x0ul); ioctl(r[6], KVM_RUN, 0); ioctl(r[6], KVM_RUN, 0); struct kvm_userspace_memory_region mr = { .slot = 0, .flags = KVM_MEM_LOG_DIRTY_PAGES, .guest_phys_addr = 0xf000, .memory_size = 0x4000, .userspace_addr = (uintptr_t) p }; ioctl(r[3], KVM_SET_USER_MEMORY_REGION, &mr); return 0; } This patch fixes the bug by not adding a new memslot even if it overlaps with private memslots. Reported-by:Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> --- virt/kvm/kvm_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
-
Eric Biggers authored
On x86, special KVM memslots such as the TSS region have anonymous memory mappings created on behalf of userspace, and these mappings are removed when the VM is destroyed. It is however possible for removing these mappings via vm_munmap() to fail. This can most easily happen if the thread receives SIGKILL while it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)' in __x86_set_memory_region(). syzkaller was able to hit this, using 'exit()' to send the SIGKILL. Note that while the vm_munmap() failure results in the mapping not being removed immediately, it is not leaked forever but rather will be freed when the process exits. It's not really possible to handle this failure properly, so almost every other caller of vm_munmap() doesn't check the return value. It's a limitation of having the kernel manage these mappings rather than userspace. So just remove the WARN_ON() so that users can't spam the kernel log with this warning. Fixes: f0d648bd ("KVM: x86: map/unmap private slots in __x86_set_memory_region") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Radim Krčmář authored
L1 might want to use SECONDARY_EXEC_DESC, so we must not clear the VMCS bit if UMIP is not being emulated. We must still set the bit when emulating UMIP as the feature can be passed to L2 where L0 will do the emulation and because L2 can change CR4 without a VM exit, we should clear the bit if UMIP is disabled. Fixes: 0367f205 ("KVM: vmx: add support for emulating UMIP") Reviewed-by:
-
Paolo Bonzini authored
The initial reset of the local APIC is performed before the VMCS has been created, but it tries to do a vmwrite: vmwrite error: reg 810 value 4a00 (err 18944) CPU: 54 PID: 38652 Comm: qemu-kvm Tainted: G W I 4.16.0-0.rc2.git0.1.fc28.x86_64 #1 Hardware name: Intel Corporation S2600CW/S2600CW, BIOS SE5C610.86B.01.01.0003.090520141303 09/05/2014 Call Trace: vmx_set_rvi [kvm_intel] vmx_hwapic_irr_update [kvm_intel] kvm_lapic_reset [kvm] kvm_create_lapic [kvm] kvm_arch_vcpu_init [kvm] kvm_vcpu_init [kvm] vmx_create_vcpu [kvm_intel] kvm_vm_ioctl [kvm] Move it later, after the VMCS has been created. Fixes: 4191db26 ("KVM: x86: Update APICv on APIC reset") Cc: stable@vger.kernel.org Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
- 23 Feb, 2018 2 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: fixes for multiple epoch facility We have certain cases where the multiple epoch facility is broken: - timer wakeup during epoch change - cpu hotplug - SCK instruction - stp sync checks Fix those.
-
Paolo Bonzini authored
Merge tag 'kvm-arm-fixes-for-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Fixes for v4.16, Round 1 Fix the interaction of userspace irqchip VMs with in-kernl irqchip VMs and make sure we can build 32-bit KVM/ARM with gcc-8.
-
- 20 Feb, 2018 4 commits
-
-
David Hildenbrand authored
Right now, SET CLOCK called in the guest does not properly take care of the epoch index, as the call goes via the old kvm_s390_set_tod_clock() interface. So the epoch index is neither reset to 0, if required, nor properly set to e.g. 0xff on negative values. Fix this by providing a single kvm_s390_set_tod_clock() function. Move Multiple-epoch facility handling into it. Signed-off-by:
-
David Hildenbrand authored
For now, we don't take care of over/underflows. Especially underflows are critical: Assume the epoch is currently 0 and we get a sync request for delta=1, meaning the TOD is moved forward by 1 and we have to fix it up by subtracting 1 from the epoch. Right now, this will leave the epoch index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong. We have to take care of over and underflows, also for the VSIE case. So let's factor out calculation into a separate function. Signed-off-by:
-
David Hildenbrand authored
We must copy both, the epoch and the epoch_idx. Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
-
David Hildenbrand authored
Missed when enabling the Multiple-epoch facility. If the facility is installed and the control is set, a sign based comaprison has to be performed. Right now we would inject wrong interrupts and ignore interrupt conditions. Also the sleep time is calculated in a wrong way. Signed-off-by:
-
- 15 Feb, 2018 2 commits
-
-
Arnd Bergmann authored
In banked-sr.c, we use a top-level '__asm__(".arch_extension virt")' statement to allow compilation of a multi-CPU kernel for ARMv6 and older ARMv7-A that don't normally support access to the banked registers. This is considered to be a programming error by the gcc developers and will no longer work in gcc-8, where we now get a build error: /tmp/cc4Qy7GR.s:34: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_usr' /tmp/cc4Qy7GR.s:41: Error: Banked registers are not available with this architecture. -- `mrs r3,ELR_hyp' /tmp/cc4Qy7GR.s:55: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_svc' /tmp/cc4Qy7GR.s:62: Error: Banked registers are not available with this architecture. -- `mrs r3,LR_svc' /tmp/cc4Qy7GR.s:69: Error: Banked registers are not available with this architecture. -- `mrs r3,SPSR_svc' /tmp/cc4Qy7GR.s:76: Error: Banked registers are not available with this architecture. -- `mrs r3,SP_abt' Passign the '-march-armv7ve' flag to gcc works, and is ok here, because we know the functions won't ever be called on pre-ARMv7VE machines. Unfortunately, older compiler versions (4.8 and earlier) do not understand that flag, so we still need to keep the asm around. Backporting to stable kernels (4.6+) is needed to allow those to be built with future compilers as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84129 Fixes: 33280b4c ("ARM: KVM: Add banked registers save/restore") Cc: stable@vger.kernel.org Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org>
-
Christoffer Dall authored
When introducing support for irqchip in userspace we needed a way to mask the timer signal to prevent the guest continuously exiting due to a screaming timer. We did this by disabling the corresponding percpu interrupt on the host interrupt controller, because we cannot rely on the host system having a GIC, and therefore cannot make any assumptions about having an active state to hide the timer signal. Unfortunately, when introducing this feature, it became entirely possible that a VCPU which belongs to a VM that has a userspace irqchip can disable the vtimer irq on the host on some physical CPU, and then go away without ever enabling the vtimer irq on that physical CPU again. This means that using irqchips in userspace on a system that also supports running VMs with an in-kernel GIC can prevent forward progress from in-kernel GIC VMs. Later on, when we started taking virtual timer interrupts in the arch timer code, we would also leave this timer state active for userspace irqchip VMs, because we leave it up to a VGIC-enabled guest to deactivate the hardware IRQ using the HW bit in the LR. Both issues are solved by only using the enable/disable trick on systems that do not have a host GIC which supports the active state, because all VMs on such systems must use irqchips in userspace. Systems that have a working GIC with support for an active state use the active state to mask the timer signal for both userspace and in-kernel irqchips. Cc: Alexander Graf <agraf@suse.de> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: d9e13977 ("KVM: arm/arm64: Support arch timers with a userspace gic") Signed-off-by:
-
- 14 Feb, 2018 7 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-master-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fixes and improvements for 4.16 - optimization for the exitless interrupt support that was merged in 4.16-rc1 - improve the branch prediction blocking for nested KVM - replace some jump tables with switch statements to improve expoline performance
-
David Hildenbrand authored
Just like for the interception handlers, let's also use a switch-case in our interrupt delivery code. Signed-off-by:
Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
Instead of having huge jump tables for function selection, let's use normal switch/case statements for the instruction handlers in intercept.c We can now also get rid of intercept_handler_t. This allows the compiler to make the right decision depending on the situation (e.g. avoid jump-tables for thunks). Signed-off-by:
-
Christian Borntraeger authored
Instead of having huge jump tables for function selection, let's use normal switch/case statements for the instruction handlers in priv.c This allows the compiler to make the right decision depending on the situation (e.g. avoid jump-tables for thunks). Signed-off-by:
-
Christian Borntraeger authored
If the guest runs with bp isolation when doing a SIE instruction, we must also run the nested guest with bp isolation when emulating that SIE instruction. This is done by activating BPBC in the lpar, which acts as an override for lower level guests. Signed-off-by:
-
Christian Borntraeger authored
If GISA is available, we do not have to kick CPUs out of SIE to deliver interrupts. The hardware can deliver such interrupts while running. Cc: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by:
-
Christian Borntraeger authored
For interrupt injection of floating interrupts we queue the interrupt either in the GISA or in the floating interrupt list. The first CPU that looks at these data structures - either in KVM code or hardware will then deliver that interrupt. To minimize latency we also: -a: choose a VCPU to deliver that interrupt. We prefer idle CPUs -b: we wake up the host thread that runs the VCPU -c: set an I/O intervention bit for that CPU so that it exits guest context as soon as the PSW I/O mask is enabled This will make sure that this CPU will execute the interrupt delivery code of KVM very soon. We can now optimize the injection case if we have exitless interrupts. The wakeup is still necessary in case the target CPU sleeps. We can avoid the I/O intervention request bit though. Whenever this intervention request would be handled, the hardware could also directly inject the interrupt on that CPU, no need to go through the interrupt injection loop of KVM. Cc: Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by:Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by:
-
- 11 Feb, 2018 3 commits
-
-
Linus Torvalds authored
-
Al Viro authored
except, again, POLLFREE and POLL_BUSY_LOOP. With this, we finally get to the promised end result: - POLL{IN,OUT,...} are plain integers and *not* in __poll_t, so any stray instances of ->poll() still using those will be caught by sparse. - eventpoll.c and select.c warning-free wrt __poll_t - no more kernel-side definitions of POLL... - userland ones are visible through the entire kernel (and used pretty much only for mangle/demangle) - same behavior as after the first series (i.e. sparc et.al. epoll(2) working correctly). Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by:
-
