- 14 Feb, 2017 25 commits
-
-
David S. Miller authored
Shannon Nelson says: ==================== sunvnet driver updates The sunvnet ldom virtual network driver was due for some updates and a bugfix or two. These patches address a few items left over from last year's make-over. v2: - changed memory barrier fix to use smp_wmb - put NETIF_F_SG back into the advertised ldmvsw hw_features v3: - the sunvnet_common module doesn't need module_init or _exit v4: - dropped the statistics patch - fixed up "default" tag for SUNVNET_COMMON ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
The ldmvsw driver is specifically for supporting the ldom virtual networking by running in the primary ldom and using the LDC to connect the remaining ldoms to the outside world via a bridge. With TSO and GSO supported while connected the bridge, things tend to misbehave as seen in our case by delayed packets, enough to begin triggering retransmits and affecting overall throughput. By turning off advertised support for TSO and GSO we restore stable traffic flow through the bridge. Orabug: 23293104 Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Shannon Nelson authored
New version and simplify the print code. Signed-off-by:
-
Shannon Nelson authored
The RCU read lock is grabbed first thing in sunvnet_start_xmit_common() so it always needs to be released. This removes the conditional release in the dropped packet error path and removes a couple of superfluous calls in the middle of the code. Reported-by:
Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Signed-off-by:
-
Shannon Nelson authored
The use of gotos for handling the incoming events made this code harder to read and support than it should be. This patch straightens out and clears up the logic. Signed-off-by:
-
Shannon Nelson authored
In order to allow the underlying LDC and outstanding memory operations to potentially catch up with the driver's Tx requests, add a memory barrier before checking again for available tx descriptors. Signed-off-by:
-
Shannon Nelson authored
There have been several changes since the first version of this code, so we bump the version number. While we're at it, we can simplify the version printing a bit and drop a couple lines of code. Signed-off-by:
-
Sowmini Varadhan authored
The vio_dring_state *dr variable is unused in maybe_tx_wakeup(). As the comments indicate, we call maybe_tx_wakeup() whenever we get a STOPPED LDC message on the port. If the queue is stopped, we want to wake it up so that we will send another START message at the next TX and trigger the consumer to drain the dring. Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Shannon Nelson authored
When the sunvnet_common code was split out for use by both sunvnet and the newer ldmvsw, it was made into a static kernel library, which limits the usefulness of sunvnet and ldmvsw as loadables, since most of the real work is being done in the shared code. Also, this is simply dead code in kernels that aren't running the LDoms. This patch makes the sunvnet_common into a dynamically loadable module and makes sunvnet and ldmvsw dependent on sunvnet_common. Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== sfc: prevent bogus interrupt-mode fallbacks EF10 VFs only support MSI-X interrupts, not MSI or legacy. This series stops the probe logic from trying to fallback to those if MSI-X interrupt probe fails. It also prevents selecting them with the interrupt_mode module parameter. This avoids producing messages like "failed to hook legacy IRQ 0" and "IRQ handler type mismatch for IRQ 0", and ensures that the relevant error (from the attempt to enable MSI-X) is reported to the caller. ==================== Signed-off-by: -
Andrew Rybchenko authored
If we fail to probe interrupts with our minimum mode, return that error. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Andrew Rybchenko authored
Add min_interrupt_mode specification per NIC type. It is a bit confusing because of "highest interrupt mode is less capable". Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== bridge: minor fdb cleanup These patches aim to simplify the bridge fdb API a little by removing some redundant functions and converting them into wrappers of a single function. Also add proper lock checking to avoid future mistakes for the search functions. ==================== Signed-off-by: -
Nikolay Aleksandrov authored
We can simplify the logic of entries pointing to the bridge by converging the fdb_delete_by functions, this would allow us to use the same function for both cases since the fdb's dst is set to NULL if it is pointing to the bridge thus we can always check for a port match. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Nikolay Aleksandrov authored
In order to avoid new errors add checks to br_fdb_find and fdb_find_rcu functions. The first requires hash_lock, the second obviously RCU. Signed-off-by:
-
Nikolay Aleksandrov authored
Before this patch we had 3 different fdb searching functions which was confusing. This patch reduces all of them to one - fdb_find_rcu(), and two flavors: br_fdb_find() which requires hash_lock and br_fdb_find_rcu which requires RCU. This makes it clear what needs to be used, we also remove two abusers of __br_fdb_get which called it under hash_lock and replace them with br_fdb_find(). Signed-off-by:
-
Volodymyr Bendiuga authored
mv88e6097 chip requires watchdog_ops to be set. Signed-off-by:
Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Jiri Pirko authored
Bring back the goto that was removed by accident. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: 40c81b25 ("sched: check negative err value to safe one level of indent") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
We had intended to say "sizeof(u32)" but the "u" is missing. Fortunately, sizeof(32) is also 4, so the original code still works. Fixes: c4e7beea ("net: qcom/emac: add ethtool support for reading hardware registers") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
-
Christophe Jaillet authored
There is no need to use an intermediate variable to handle an error code in this case. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe Jaillet authored
'of_node_put(fpi->phy_node)' should also be called if we branch to 'out_deregister_fixed_link' error handling path. Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20170210' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== afs: Use system UUID generation There is now a general function for generating a UUID and AFS should make use of it. It's also been recommended to me that I switch to using random rather than time plus MAC address-based UUIDs which this function does. ==================== Signed-off-by:
-
Tobias Klauser authored
garp_port is only used in net/802/garp.c which is only compiled with CONFIG_GARP enabled. Same goes for mrp_port which is only used in net/802/mrp.c with CONFIG_MRP enabled. Only include the two members in struct net_device if their respective CONFIG_* is enabled. This saves a few bytes in struct net_device in case CONFIG_GARP or CONFIG_MRP are not enabled. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Eric Dumazet authored
Commit 79e7fff4 ("net: remove support for per driver ndo_busy_poll()") made them obsolete. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-02-11 This series contains updates to i40e and i40evf only. Jake makes a minor change to prevent a minor bit of work, if it is not necessary. In the case where we do not have a client, there is no need to check the client params, so move the check till after we have ensured we have a client. Correct a code comment which incorrectly implied that raw_packet buffers were freed in i40e_clean_tx_ring(), so fixed the code comment to better explain where memory is freed. Reduce the severity and frequency of the message notifying we cleared the receive timestamp register, since the logic has a much better detection scheme that could detect a stalled receive timestamp register. The improved logic was actually causing the notification message to occur more frequently and was giving the user a false perception that a timestamp event was missed for a valid packet, so reduce the severity from dev_warn to dev_dbg and only fire off the message when 3 or 4 of the RXTIME registers are stalled and get cleared within the same watchdog event. Fixed a bug, where we were modifying the mac_filter outside a lock when handling the addition of broadcast filters. Fix this by updating i40e_update_filter_state logic so that it knows to avoid broadcast filters, which ensures that we do not have to remove the filter separately and can put it back using the normal flow. Refactored how we add new filters to firmware to avoid a race condition that can occur due to removing filters from the hash temporarily. Mitch adds a sleep (without timeout) so that we wait for a reply from the PF before we continue, since the iWarp client cannot continue until the operation is completed. Fixed up a function which could never return an error, to be void and cleaned up the checking of the now null and void return value. Scott limits the DMA sync to CPU to the actual length of the incoming packet, versus the syncing of the entire buffer. Also reduces the receive buffer struct (by a single pointer) and align the driver to be more consistent with other Intel drivers with respect to packets that span buffers. Sudheer adds a field to track the bus number info and modified log statements to print bus, device and function information. Henry adds the ability to store the FEC status bits from the link up event. Also adds the ethtool support for FEC capabilities and 25G link types. ==================== Signed-off-by:
-
- 13 Feb, 2017 15 commits
-
-
Pavel Belous authored
Using new link mode indices instead deprecated SUPPORTED_/ADVERTISED_ macro. Added indication for 2500 and 5000mbit link modes (AQtion adapter already supports these speeds). Signed-off-by:
Pavel Belous <pavel.belous@aquantia.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6xxx Watchdog support The Marvell switches have an in built watchdog over some of the internal state machine. The watchdog can be configured to raise an interrupt on error. The problem the watchdog found is then logged to the kernel log. The older switches can automagically perform a software reset when the watchdog triggers. This just resets the internal state machine, but leaves the switch configuration unchanged. The 6390 family of switches cannot both raise an interrupt and automagically perform a software reset. So the interrupt handler has to perform the switch reset, and then re-enable the watchdog interrupts. This has been tested using hacked together debugfs code which allows the "force" bit to be set, so cause a watchdog interrupt. v2: Remove g2_prefix ==================== Signed-off-by: -
Andrew Lunn authored
Implement the ops needed to support the watchdog for the MV88E6390 family. Signed-off-by:
-
Andrew Lunn authored
The switch contains a watchdog looking for issues with the internal gubbins of the switch. Hook the interrupt the watchdog triggers and log the value of the control register indicating why the watchdog fired. The watchdog can only be cleared with a switch reset, which will destroy the current configuration. Rather than doing this, just disable the interrupt. The mv88e6390 family has different watchdog registers. So use an ops structure, so support for the mv88e6390 family can be added later. Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:Hyong-Youb Kim <hykim@myri.com> Signed-off-by:
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: -
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by:
-
