- 01 Oct, 2013 24 commits
-
-
Jeff Kirsher authored
Cleans up the whitespace issues noticed during code review where a mix of tabs and spaces were used for indentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leonardo Potenza authored
Added support for DCB registers dump using ethtool -d option both for 82599 and x540 ethernet controllers Signed-off-by: Leonardo Potenza <leonardo.potenza@intel.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
After this patch the API negotiation will occur in the reset path. So now the PF will be informed of the API version earlier. This will also require the mailbox lock to be initialize sooner as well. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
New function was added to wait for Rx queues to be disabled before disabling NAPI. This function also allows us to modify ixgbevf_rx_desc_queue_enable() to better match ixgbe. I also cleaned up some msleep calls to usleep_range while I was in this code anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
Since we are already checking for read failure in check_link we don't need to do it here. Instead just make sure the watchdog task gets scheduled, if we are up, and it can be done there. This will better follow igbvf method of handling a mailbox event and message timeout. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jacob Keller authored
This patch removes the use of hw_dbg in ixgbevf when the ixgbe_get_regs function is called from ethtool. This goes along side a patch to ethtool which enables proper support for ixgbevf pretty-printing of registers. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
In the xmit path, the driver may drop some pkts due to reasons such as DMA mapping errors, out of memory conditions or to protect HW from unrecoverable errors. Add a counter in TX-stats for such drops. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
The current EQ delay calculation for AIC is based only on RX packet rate. This fails to be effective when there's only TX and no RX. This patch inclues: - Calculating EQ-delay based on both RX and TX pps. - Modifying EQ-delay of all EQs via one cmd, instead of issuing a separate cmd for each EQ. - A new structure to store interrupt coalescing parameters, in a separate cache-line from the EQ-obj. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
This cmd needs to be sent to FW when enabling VFs (currently used only for Lancer.) Also, avoid calling the cmd when driver loads and finds that VFs are already enabled from a previous load. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
On BE3-R 1G ports (identified by port numbers 2 and 3) the FW cannot properly support multiple TXQs. This also makes the number of RX and TX queues symmetric as only a single RXQ is available on 1G ports. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
It is a required field for all TX_CREATE cmd versions > 0. Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
Re-define the sriov_want() macro to check for number of VFs that need to be enabled in the current load of the driver or the number of VFs that still remain enabled from the previous load (attached VFs cannot be disabled.) Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sachin Kamat authored
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently we rely on rtnl locking in bond_set_rx_mode(), however it's not always the case: RTNL: assertion failed at drivers/net/bonding/bond_main.c (3391) ... [<ffffffff81651ca5>] dump_stack+0x54/0x74 [<ffffffffa029e717>] bond_set_rx_mode+0xc7/0xd0 [bonding] [<ffffffff81553af7>] __dev_set_rx_mode+0x57/0xa0 [<ffffffff81557ff8>] __dev_mc_add+0x58/0x70 [<ffffffff81558020>] dev_mc_add+0x10/0x20 [<ffffffff8161e26e>] igmp6_group_added+0x18e/0x1d0 [<ffffffff81186f76>] ? kmem_cache_alloc_trace+0x236/0x260 [<ffffffff8161f80f>] ipv6_dev_mc_inc+0x29f/0x320 [<ffffffff8161f9e7>] ipv6_sock_mc_join+0x157/0x260 ... Fix this by using RCU primitives. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Avinash Kumar authored
removes following warnings- drivers/net/phy/marvell.c:37: WARNING: Use #include <linux/io.h> instead of <asm/io.h> drivers/net/phy/marvell.c:39: WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Signed-off-by: Avinash Kumar <avi.kp.137@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
bnx2x makes a dangerous use of skb_is_gso_v6(). It should first make sure skb is a gso packet Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Acked-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Warning(include/net/sock.h:411): No description found for parameter 'sk_max_pacing_rate' Lets please "make htmldocs" and kbuild bot. Reported-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This makes it possible to use some more advanced queuing techniques with this driver. When multi queue support will be added some changes to Byte Queue handling is needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hauke Mehrtens authored
This makes it possible to use some more advanced queuing techniques with this driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric W. Biederman authored
- Move sysctl_local_ports from a global variable into struct netns_ipv4. - Modify inet_get_local_port_range to take a struct net, and update all of the callers. - Move the initialization of sysctl_local_ports into sysctl_net_ipv4.c:ipv4_sysctl_init_net from inet_connection_sock.c v2: - Ensure indentation used tabs - Fixed ip.h so it applies cleanly to todays net-next v3: - Compile fixes of strange callers of inet_get_local_port_range. This patch now successfully passes an allmodconfig build. Removed manual inlining of inet_get_local_port_range in ipv4_local_port_range Originally-by: Samya <samya@twitter.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Mark code path's likely/unlikely based on most common usage. * Very few devices use dsa tags. * Most traffic is Ethernet (not 802.2) * No sane person uses trailer type or Novell encapsulation Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Remove old legacy comment and weird if condition. The comment has outlived it's stay and is throwback to some early net code (before my time). Maybe Dave remembers what it meant. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 30 Sep, 2013 13 commits
-
-
git://gitorious.org/linux-can/linux-can-nextDavid S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Li RongQing authored
setting fl6.flowi6_flags as zero after memset is redundant, Remove it. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Liu authored
There was a bug that netback routines netbk/xenvif_skb_count_slots and netbk/xenvif_gop_frag_copy disagreed with each other, which caused netback to push wrong number of responses to netfront, which caused netfront to eventually crash. The bug was fixed in 6e43fc04 ("xen-netback: count number required slots for an skb more carefully"). Commit 6e43fc04 focused on backport-ability. The drawback with the existing packing scheme is that the ring is not used effeciently, as stated in 6e43fc04. skb->data like: | 1111|222222222222|3333 | is arranged as: |1111 |222222222222|3333 | If we can do this: |111122222222|22223333 | That would save one ring slot, which improves ring effeciency. This patch effectively reverts 6e43fc04. That patch made count_slots agree with gop_frag_copy, while this patch goes the other way around -- make gop_frag_copy agree with count_slots. The end result is that they still agree with each other, and the ring is now arranged like: |111122222222|22223333 | The patch that improves packing was first posted by Xi Xong and Matt Wilson. I only rebase it on top of net-next and rewrite commit message, so I retain all their SoBs. For more infomation about the original bug please refer to email listed below and commit message of 6e43fc04. Original patch: http://lists.xen.org/archives/html/xen-devel/2013-07/msg00760.htmlSigned-off-by: Xi Xiong <xixiong@amazon.com> Reviewed-by: Matt Wilson <msw@amazon.com> [ msw: minor code cleanups, rewrote commit message, adjusted code to count RX slots instead of meta structures ] Signed-off-by: Matt Wilson <msw@amazon.com> Cc: Annie Li <annie.li@oracle.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> [ liuw: rebased on top of net-next tree, rewrote commit message, coding style cleanup. ] Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Acked-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
err is set once, then first code resets it. err = tcf_exts_validate(...) Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jamal Hadi Salim <hadi@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Rather than returning earlier value (EINVAL), return ENOMEM if kzalloc fails. Found while reviewing to find another EINVAL condition. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
It's a forgotten function declaration, which was removed some time ago already. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://repo.or.cz/linux-2.6/trivial-modsDavid S. Miller authored
Conflicts: include/linux/netdevice.h More extern removals from Joe Perches. Minor conflict with the dev_notify_flags changes which added a new argument to __dev_notify_flags(). Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-nextDavid S. Miller authored
Conflicts: include/net/xfrm.h Simple conflict between Joe Perches "extern" removal for function declarations in header files and the changes in Steffen's tree. Steffen Klassert says: ==================== Two patches that are left from the last development cycle. Manual merging of include/net/xfrm.h is needed. The conflict can be solved as it is currently done in linux-next. 1) We announce the creation of temporary acquire state via an asyc event, so the deletion should be annunced too. From Nicolas Dichtel. 2) The VTI tunnels do not real tunning, they just provide a routable IPsec tunnel interface. So introduce and use xfrm_tunnel_notifier instead of xfrm_tunnel for xfrm tunnel mode callback. From Fan Du. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Opdenacker authored
This patch proposes to remove the IRQF_DISABLED flag from drivers/net/hamradio/baycom_* It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
When flags IFF_PROMISC and IFF_ALLMULTI are changed, netlink messages are not consistent. For example, if a multicast daemon is running (flag IFF_ALLMULTI set in dev->flags but not dev->gflags, ie not exported to userspace) and then a user sets it via netlink (flag IFF_ALLMULTI set in dev->flags and dev->gflags, ie exported to userspace), no netlink message is sent. Same for IFF_PROMISC and because dev->promiscuity is exported via IFLA_PROMISCUITY, we may send a netlink message after each change of this counter. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
This patch only prepares the next one, there is no functional change. Now, __dev_notify_flags() can also be used to notify flags changes via rtnetlink. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabio Porcedda authored
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabio Porcedda authored
Newer firmware use a new pid and a different interface. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 28 Sep, 2013 3 commits
-
-
Eric Dumazet authored
As mentioned in commit afe4fd06 ("pkt_sched: fq: Fair Queue packet scheduler"), this patch adds a new socket option. SO_MAX_PACING_RATE offers the application the ability to cap the rate computed by transport layer. Value is in bytes per second. u32 val = 1000000; setsockopt(sockfd, SOL_SOCKET, SO_MAX_PACING_RATE, &val, sizeof(val)); To be effectively paced, a flow must use FQ packet scheduler. Note that a packet scheduler takes into account the headers for its computations. The effective payload rate depends on MSS and retransmits if any. I chose to make this pacing rate a SOL_SOCKET option instead of a TCP one because this can be used by other protocols. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
There are no users left, so it's safe to remove. CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
We don't need the circular loop there and it's the only current user of bond_next_slave() - so just use the standard bond_for_each_slave(). CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-