Like various other devices using similar hardware, this model reports a
perpetually empty battery (0-1%).

Join the others and apply HID_BATTERY_QUIRK_IGNORE.
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The EHL (Elkhart Lake) based platforms provide a OOB (Out of band)
service, which allows to wakup device when the system is in S5 (Soft-Off
state). This OOB service can be enabled/disabled from BIOS settings. When
enabled, the ISH device gets PME wake capability. To enable PME wakeup,
driver also needs to enable ACPI GPE bit.

On resume, BIOS will clear the wakeup bit. So driver need to re-enable it
in resume function to keep the next wakeup capability. But this BIOS
clearing of wakeup bit doesn't decrement internal OS GPE reference count,
so this reenabling on every resume will cause reference count to overflow.

So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

Fixes: 2e23a70e ("HID: intel-ish-hid: ipc: finish power flow for EHL OOB")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Closes: https://lore.kernel.org/lkml/CAAd53p4=oLYiH2YbVSmrPNj1zpMcfp=Wxbasb5vhMXOWCArLCg@mail.gmail.com/T/Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

usb_free_urb() does the NULL check itself, so there is no need to duplicate
it prior to calling.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e1cd4004 ("HID: sony: Fix a potential memory leak in sony_probe()")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When suspending the computer, a Switch Pro Controller connected via USB will
lose its internal status. However, because the USB connection was technically
never lost, when resuming the computer, the driver will attempt to communicate
with the controller as if nothing happened (and fail).
Because of this, the user was forced to manually disconnect the controller
(or to press the sync button on the controller to power it off), so that it
can be re-initialized.

With this patch, the controller will be automatically re-initialized after
resuming from suspend.

Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216233Signed-off-by: Martino Fontana <tinozzo123@gmail.com>
Reviewed-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.

Add the missing calls.

Fixes: 3ab196f8 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The commit in Fixes updated the error handling path of
thunderstrike_create() and the remove function but not the error handling
path of shield_probe(), should an error occur after a successful
thunderstrike_create() call.

Add the missing call. Make sure it is safe to call in the probe error
handling path by preventing the led_classdev from attempting to set the LED
brightness to the off state on unregister.

Fixes: f88af60e ("HID: nvidia-shield: Support LED functionality for Thunderstrike")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Register the Synaptics device as a special multitouch device with certain
quirks that may improve usability of the touchpad device.
Reported-by: Rain <rain@sunshowers.io>
Closes: https://lore.kernel.org/linux-input/2bbb8e1d-1793-4df1-810f-cb0137341ff4@app.fastmail.com/Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Battery information reported by the driver depends on the power supply
subsystem. Select the required subsystem when the HID_NVIDIA_SHIELD Kconfig
option is enabled.

Fixes: 3ab196f8 ("HID: nvidia-shield: Add battery support for Thunderstrike")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

There is a slab-out-of-bounds Write bug in hid-holtek-kbd driver.
The problem is the driver assumes the device must have an input
but some malicious devices violate this assumption.

Fix this by checking hid_device's input is non-empty before its usage.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The hid-nvidia-shield driver uses functions that are built
only when LEDS_CLASS is set, so make the driver depend on that
symbol to prevent build errors.

riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L11':
hid-nvidia-shield.c:(.text+0x192): undefined reference to `led_classdev_unregister'
riscv32-linux-ld: drivers/hid/hid-nvidia-shield.o: in function `.L113':
hid-nvidia-shield.c:(.text+0xfa4): undefined reference to `led_classdev_register_ext'

Fixes: 09308562 ("HID: nvidia-shield: Initial driver implementation with Thunderstrike support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Using hidpp for the M720 adds battery info reporting and hires
scrolling support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The hid_hw_raw_request() function returns negative error codes or the
number bytes transferred.  The problem is that when it returns negative
error codes and we check if "ret < sizeof(arctis_1_battery_request)",
then the negative values are type promoted from int to high unsigned long
values and treated as success.

This was detected using Smatch:

    drivers/hid/hid-steelseries.c:393 steelseries_headset_arctis_1_fetch_battery()
    warn: error code type promoted to positive: 'ret'

Fixes: a0c76896 ("HID: steelseries: Add support for Arctis 1 XBox")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If an error occurs after a successful usb_alloc_urb() call, usb_free_urb()
should be called.

Fixes: fb1a79a6 ("HID: sony: fix freeze when inserting ghlive ps3/wii dongles")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Benjamin Tissoires:

 - devm fixes for problems that caused use-after-free reports (Rahul
   Rameshbabu)

 - Some extensive HID docs (Marco Morandini)

 - Constification of struct class (Ivan Orlov and Greg Kroah-Hartman)

 - Google Stadia Force Feedback support (Fabio Baltieri)

 - Various fixes and new device ID support

* tag 'for-linus-2023083101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (42 commits)
  HID: logitech-hidpp: rework one more time the retries attempts
  HID: nvidia-shield: Reference hid_device devm allocation of input_dev name
  HID: multitouch: Correct devm device reference for hidinput input_dev name
  HID: uclogic: Correct devm device reference for hidinput input_dev name
  HID: logitech-dj: Fix error handling in logi_dj_recv_switch_to_dj_mode()
  HID: i2c-hid: elan: Add ili9882t timing
  dt-bindings: input: i2c-hid: Introduce Ilitek ili9882t
  HID: apple: Add "Hailuck" to the list of non-apple keyboards
  HID: steelseries: arctis_1_battery_request[] should be static
  MAINTAINERS: update my email address
  HID: logitech-hidpp: Add support for Logitech MX Anywhere 3 mouse
  HID: wacom: struct name cleanup
  HID: wacom: remove unnecessary 'connected' variable from EKR
  HID: wacom: remove the battery when the EKR is off
  HID: nvidia-shield: Update Thunderstrike LED instance name to use id
  HID: nvidia-shield: Add battery support for Thunderstrike
  HID: nvidia-shield: Remove led_classdev_unregister in thunderstrike_create
  HID: hid-google-stadiaff: add support for Stadia force feedback
  HID: logitech-dj: Add support for a new lightspeed receiver iteration
  HID: logitech-hidpp: Add support for the Pro X Superlight
  ...

Pull media updates from Mauro Carvalho Chehab:

 - new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913

 - new Intel IVSC MEI drivers

 - some Mediatek platform drivers were moved to a common location

 - Intel atomisp2 driver is now working with the main ov2680 driver. Due
   to that, the atomisp2 ov2680 staging one was removed

 - the bttv driver was finally converted to videobuf2 framework. This
   was the last one upstream using videobuf version 1 core. We'll likely
   remove the old videobuf framework on 6.7

 - lots of improvements at atomisp driver: it now works with normal I2C
   sensors. Several compile-mode dependecies to select between ISP2400
   and ISP2401 are now solved in runtime

 - a new ipu-bridge logic was added to work with IVSC MEI drivers

 - venus driver gained better support for new VPU versions

 - the v4l core async framework has gained lots of improvements and
   cleanups

 - lots of other cleanups, improvements and driver fixes

* tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits)
  media: ivsc: Add ACPI dependency
  media: bttv: convert to vb2
  media: bttv: use audio defaults for winfast2000
  media: bttv: refactor bttv_set_dma()
  media: bttv: move vbi_skip/vbi_count out of buffer
  media: bttv: remove crop info from bttv_buffer
  media: bttv: remove tvnorm field from bttv_buffer
  media: bttv: remove format field from bttv_buffer
  media: bttv: move do_crop flag out of bttv_fh
  media: bttv: copy vbi_fmt from bttv_fh
  media: bttv: copy vid fmt/width/height from fh
  media: bttv: radio use v4l2_fh instead of bttv_fh
  media: bttv: replace BUG with WARN_ON
  media: bttv: use video_drvdata to get bttv
  media: i2c: rdacm21: Fix uninitialized value
  media: coda: Remove duplicated include
  media: vivid: fix the racy dev->radio_tx_rds_owner
  media: i2c: ccs: Check rules is non-NULL
  media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate
  media: i2c: ds90ub953: Fix use of uninitialized variables
  ...

Pull fbdev updates from Helge Deller:

 - Drop the mx3fb driver

 - Use list_for_each_entry() helper in fbcore code

 - Shorten neofb product names for fb-fix id field

 - reduce memory usage in ssd1307fb

* tag 'fbdev-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: Update fbdev source file paths
  fbdev: ssd1307fb: Use bool for ssd1307fb_deviceinfo flags
  fbdev: neofb: Shorten Neomagic product name in info struct
  fbdev: mx3fb: Remove the driver
  fbdev/core: Use list_for_each_entry() helper

Pull char/misc driver updates from Greg KH:
 "Here is the big set of char/misc and other small driver subsystem
  changes for 6.6-rc1.

  Stuff all over the place here, lots of driver updates and changes and
  new additions. Short summary is:

   - new IIO drivers and updates

   - Interconnect driver updates

   - fpga driver updates and additions

   - fsi driver updates

   - mei driver updates

   - coresight driver updates

   - nvmem driver updates

   - counter driver updates

   - lots of smaller misc and char driver updates and additions

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
  nvmem: core: Notify when a new layout is registered
  nvmem: core: Do not open-code existing functions
  nvmem: core: Return NULL when no nvmem layout is found
  nvmem: core: Create all cells before adding the nvmem device
  nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
  nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
  dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
  dt-bindings: nvmem: Add compatible for QCM2290
  nvmem: Kconfig: Fix typo "drive" -> "driver"
  nvmem: Explicitly include correct DT includes
  nvmem: add new NXP QorIQ eFuse driver
  dt-bindings: nvmem: Add t1023-sfp efuse support
  dt-bindings: nvmem: qfprom: Add compatible for MSM8226
  nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
  nvmem: qfprom: do some cleanup
  nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
  nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
  nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
  nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
  nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
  ...

Pull driver core updates from Greg KH:
 "Here is a small set of driver core updates and additions for 6.6-rc1.

  Included in here are:

   - stable kernel documentation updates

   - class structure const work from Ivan on various subsystems

   - kernfs tweaks

   - driver core tests!

   - kobject sanity cleanups

   - kobject structure reordering to save space

   - driver core error code handling fixups

   - other minor driver core cleanups

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
  driver core: Call in reversed order in device_platform_notify_remove()
  driver core: Return proper error code when dev_set_name() fails
  kobject: Remove redundant checks for whether ktype is NULL
  kobject: Add sanity check for kset->kobj.ktype in kset_register()
  drivers: base: test: Add missing MODULE_* macros to root device tests
  drivers: base: test: Add missing MODULE_* macros for platform devices tests
  drivers: base: Free devm resources when unregistering a device
  drivers: base: Add basic devm tests for platform devices
  drivers: base: Add basic devm tests for root devices
  kernfs: fix missing kernfs_iattr_rwsem locking
  docs: stable-kernel-rules: mention that regressions must be prevented
  docs: stable-kernel-rules: fine-tune various details
  docs: stable-kernel-rules: make the examples for option 1 a proper list
  docs: stable-kernel-rules: move text around to improve flow
  docs: stable-kernel-rules: improve structure by changing headlines
  base/node: Remove duplicated include
  kernfs: attach uuid for every kernfs and report it in fsid
  kernfs: add stub helper for kernfs_generic_poll()
  x86/resctrl: make pseudo_lock_class a static const structure
  x86/MSR: make msr_class a static const structure
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...

Pull staging driver updates from Greg KH:
 "Here are a set of staging driver cleanups for 6.6-rc1. Nothing huge in
  here at all, overall we dropped a few hundred lines of code, it's been
  a quiet development cycle for this subsystem.

  Nothing stands out, everything can be categorized as "minor coding
  style cleanups for staging drivers" and there was one race condition
  fixed.

  Full details in the shortlog.

  All have been in linux-next for a while with no reported problems"

* tag 'staging-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (71 commits)
  staging: rtl8192e: Annotate struct rtllib_txb with __counted_by
  staging: greybus: fix alignment of open parenthesis
  staging: sm750fb: fix sii164InitChip function name
  staging: vme_user: fix check lines should not end with a '('
  staging: vme_user: fix check blank lines not necessary
  staging: rtl8723bs: Use helpers to check broadcast and multicast Ether addresses
  staging: vt6655: replace camel case by snake case
  staging: rtl8192e: Remove unsupported mode IW_MODE_MESH
  staging: rtl8192e: Remove unsupported mode IW_MODE_REPEAT
  staging: rtl8192e: Remove unused function rtllib_start_master_bss()
  staging: rtl8192e: Remove unsupported mode IW_MODE_MASTER
  staging: vt6655: Change camel case variables to snake case
  staging: fieldbus: arcx-anybus: Remove redundant of_match_ptr()
  staging: vme_user: fix alignment of open parenthesis
  Staging: rtl8192e: Rename function RxBaInactTimeout
  Staging: rtl8192e: Rename function TxBaInactTimeout
  Staging: rtl8192e: Rename function BaSetupTimeOut
  Staging: rtl8192e: Rename function TsInitDelBA
  Staging: rtl8192e: Rename function TsInitAddBA
  staging: vme_user: fix check alignment should match open parenthesis
  ...

Pull USB / Thunderbolt / PHY driver updates from Greg KH:
 "Here is the big set of USB, Thunderbolt, and PHY driver updates for
  6.6-rc1. Included in here are:

   - PHY driver additions and cleanups

   - Thunderbolt minor additions and fixes

   - USB MIDI 2 gadget support added

   - dwc3 driver updates and additions

   - Removal of some old USB wireless code that was missed when that
     codebase was originally removed a few years ago, cleaning up some
     core USB code paths

   - USB core potential use-after-free fixes that syzbot from different
     people/groups keeps tripping over

   - typec updates and additions

   - gadget fixes and cleanups

   - loads of smaller USB core and driver cleanups all over the place

  Full details are in the shortlog. All of these have been in linux-next
  for a while with no reported problems"

* tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  platform/chrome: cros_ec_typec: Configure Retimer cable type
  tcpm: Avoid soft reset when partner does not support get_status
  usb: typec: tcpm: reset counter when enter into unattached state after try role
  usb: typec: tcpm: set initial svdm version based on pd revision
  USB: serial: option: add FOXCONN T99W368/T99W373 product
  USB: serial: option: add Quectel EM05G variant (0x030e)
  usb: dwc2: add pci_device_id driver_data parse support
  usb: gadget: remove max support speed info in bind operation
  usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()
  usb: gadget: config: remove max speed check in usb_assign_descriptors()
  usb: gadget: unconditionally allocate hs/ss descriptor in bind operation
  usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()
  usb: gadget: add a inline function gether_bitrate()
  usb: gadget: use working speed to calcaulate network bitrate and qlen
  dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support
  usb: dwc3: exynos: Add support for Exynos850 variant
  usb: gadget: udc-xilinx: fix incorrect type in assignment warning
  usb: gadget: udc-xilinx: fix cast from restricted __le16 warning
  usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning
  USB: dwc2: hande irq on dead controller correctly
  ...

Merge tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:

 - hp-bioscfg: New firmware-attributes driver for changing BIOS settings
   from within Linux

 - asus-wmi: Add charger mode, middle fan and eGPU settings support

 - ideapad: Support keyboard backlight control on more models

 - mellanox: Support for new models

 - sel-3350: New LED and power-supply driver for this industrial
   mainboard

 - simatic-ipc: Add RTC battery monitor and various new models support

 - miscellaneous other cleanups / fixes

* tag 'platform-drivers-x86-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (101 commits)
  platform/x86: asus-wmi: corrections to egpu safety check
  platform/x86: mlx-platform: Add dependency on PCI to Kconfig
  platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol
  platform/x86/amd/pmc: Fix build error with randconfig
  platform/x86/amd/pmf: Fix a missing cleanup path
  watchdog: simatic: Use idiomatic selection of P2SB
  platform/x86: p2sb: Make the Kconfig symbol hidden
  Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
  platform: mellanox: nvsw-sn2201: change fans i2c busses.
  platform: mellanox: mlxreg-hotplug: Extend condition for notification callback processing
  platform: mellanox: Add initial support for PCIe based programming logic device
  platform: mellanox: mlx-platform: Get interrupt line through ACPI
  platform: mellanox: mlx-platform: Introduce ACPI init flow
  platform: mellanox: mlx-platform: Prepare driver to allow probing through ACPI infrastructure
  platform: mellanox: mlx-platform: Add reset callback
  platform: mellanox: Cosmetic changes
  platform: mellanox: mlx-platform: Modify power off callback
  platform: mellanox: mlx-platform: add support for additional CPLD
  platform: mellanox: mlx-platform: Add reset cause attribute
  platform: mellanox: mlx-platform: Modify health and power hotplug action
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the new "riscv,isa-extensions" and "riscv,isa-base"
   device tree interfaces for probing extensions

 - Support for userspace access to the performance counters

 - Support for more instructions in kprobes

 - Crash kernels can be allocated above 4GiB

 - Support for KCFI

 - Support for ELFs in !MMU configurations

 - ARCH_KMALLOC_MINALIGN has been reduced to 8

 - mmap() defaults to sv48-sized addresses, with longer addresses hidden
   behind a hint (similar to Arm and Intel)

 - Also various fixes and cleanups

* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
  lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
  riscv: support PREEMPT_DYNAMIC with static keys
  riscv: Move create_tmp_mapping() to init sections
  riscv: Mark KASAN tmp* page tables variables as static
  riscv: mm: use bitmap_zero() API
  riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
  riscv: remove redundant mv instructions
  RISC-V: mm: Document mmap changes
  RISC-V: mm: Update pgtable comment documentation
  RISC-V: mm: Add tests for RISC-V mm
  RISC-V: mm: Restrict address space for sv39,sv48,sv57
  riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
  riscv: allow kmalloc() caches aligned to the smallest value
  riscv: support the elf-fdpic binfmt loader
  binfmt_elf_fdpic: support 64-bit systems
  riscv: Allow CONFIG_CFI_CLANG to be selected
  riscv/purgatory: Disable CFI
  riscv: Add CFI error handling
  riscv: Add ftrace_stub_graph
  riscv: Add types to indirectly called assembly functions
  ...

Pull arch/csky fix from Guo Ren:

 - Fix compile error by missing header file

* tag 'csky-for-linus-6.6-2' of https://github.com/c-sky/csky-linux:
  csky: Fixup compile error

Pull NFS client updates from Anna Schumaker:
 "New Features:
   - Enable the NFS v4.2 READ_PLUS operation by default

  Stable Fixes:
   - NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
   - NFS: Fix a potential data corruption

  Bugfixes:
   - Fix various READ_PLUS issues including:
      - smatch warnings
      - xdr size calculations
      - scratch buffer handling
      - 32bit / highmem xdr page handling
   - Fix checkpatch errors in file.c
   - Fix redundant readdir request after an EOF
   - Fix handling of COPY ERR_OFFLOAD_NO_REQ
   - Fix assignment of xprtdata.cred

  Cleanups:
   - Remove unused xprtrdma function declarations
   - Clean up an integer overflow check to avoid a warning
   - Clean up #includes in dns_resolve.c
   - Clean up nfs4_get_device_info so we don't pass a NULL pointer
     to __free_page()
   - Clean up sunrpc TCP socket timeout configuration
   - Guard against READDIR loops when entry names are too long
   - Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"

* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
  pNFS: Fix assignment of xprtdata.cred
  NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
  NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
  NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
  NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
  SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
  SUNRPC: Allow specification of TCP client connect timeout at setup
  SUNRPC: Refactor and simplify connect timeout
  SUNRPC: Set the TCP_SYNCNT to match the socket timeout
  NFS: Fix a potential data corruption
  nfs: fix redundant readdir request after get eof
  nfs/blocklayout: Use the passed in gfp flags
  filemap: Fix errors in file.c
  NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
  NFS: Move common includes outside ifdef
  SUNRPC: clean up integer overflow check
  xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
  NFS: Enable the READ_PLUS operation by default
  SUNRPC: kmap() the xdr pages during decode
  NFSv4.2: Rework scratch handling for READ_PLUS (again)
  ...

Pull nfsd updates from Chuck Lever:
 "I'm thrilled to announce that the Linux in-kernel NFS server now
  offers NFSv4 write delegations. A write delegation enables a client to
  cache data and metadata for a single file more aggressively, reducing
  network round trips and server workload. Many thanks to Dai Ngo for
  contributing this facility, and to Jeff Layton and Neil Brown for
  reviewing and testing it.

  This release also sees the removal of all support for DES- and
  triple-DES-based Kerberos encryption types in the kernel's SunRPC
  implementation. These encryption types have been deprecated by the
  Internet community for years and are considered insecure. This change
  affects both the in-kernel NFS client and server.

  The server's UDP and TCP socket transports have now fully adopted
  David Howells' new bio_vec iterator so that no more than one sendmsg()
  call is needed to transmit each RPC message. In particular, this helps
  kTLS optimize record boundaries when sending RPC-with-TLS replies, and
  it takes the server a baby step closer to handling file I/O via
  folios.

  We've begun work on overhauling the SunRPC thread scheduler to remove
  a costly linked-list walk when looking for an idle RPC service thread
  to wake. The pre-requisites are included in this release. Thanks to
  Neil Brown for his ongoing work on this improvement"

* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
  Documentation: Add missing documentation for EXPORT_OP flags
  SUNRPC: Remove unused declaration rpc_modcount()
  SUNRPC: Remove unused declarations
  NFSD: da_addr_body field missing in some GETDEVICEINFO replies
  SUNRPC: Remove return value of svc_pool_wake_idle_thread()
  SUNRPC: make rqst_should_sleep() idempotent()
  SUNRPC: Clean up svc_set_num_threads
  SUNRPC: Count ingress RPC messages per svc_pool
  SUNRPC: Deduplicate thread wake-up code
  SUNRPC: Move trace_svc_xprt_enqueue
  SUNRPC: Add enum svc_auth_status
  SUNRPC: change svc_xprt::xpt_flags bits to enum
  SUNRPC: change svc_rqst::rq_flags bits to enum
  SUNRPC: change svc_pool::sp_flags bits to enum
  SUNRPC: change cache_head.flags bits to enum
  SUNRPC: remove timeout arg from svc_recv()
  SUNRPC: change svc_recv() to return void.
  SUNRPC: call svc_process() from svc_recv().
  nfsd: separate nfsd_last_thread() from nfsd_put()
  nfsd: Simplify code around svc_exit_thread() call in nfsd()
  ...

The files fbmem.c, fb_defio.c, fbsysfs.c, fbmon.c, modedb.c, and
fbcmap.c were moved. Drop the path and just keep the file name.

Reported by kalekale in #kernel (Libera IRC).

Fixes: f7018c21 ("video: move fbdev to drivers/video/fbdev")
Fixes: 19757fc8 ("fbdev: move fbdev core files to separate directory")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Helge Deller <deller@gmx.de>

The .need_pwm and .need_chargepump fields in struct ssd1307fb_deviceinfo
are flags that can have only two possible values: 0 and 1.
Reduce kernel size by changing their types from int to bool.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Avoid those compiler warnings:
neofb.c:1959:3: warning: 'snprintf' will always be truncated;
   specified size is 16, but format string expands to at least 17 [-Wfortify-source]
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/all/CAKwvOdn0xoVWjQ6ufM_rojtKb0f1i1hW-J_xYGfKDNFdHwaeHQ@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1923

Pull smb server updates from Steve French:

 - fix potential overflows in decoding create and in session setup
   requests

 - cleanup fixes

 - compounding fixes, including one for MacOS compounded read requests

 - session setup error handling fix

 - fix mode bit bug when applying force_directory_mode and
   force_create_mode

 - RDMA (smbdirect) write fix

* tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd:
  ksmbd: add missing calling smb2_set_err_rsp() on error
  ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
  ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
  ksmbd: fix wrong DataOffset validation of create context
  ksmbd: Fix one kernel-doc comment
  ksmbd: reduce descriptor size if remaining bytes is less than request size
  ksmbd: fix `force create mode' and `force directory mode'
  ksmbd: fix wrong interim response on compound
  ksmbd: add support for read compound
  ksmbd: switch to use kmemdup_nul() helper

Pull jfs updates from Dave Kleikamp:
 "A few small fixes"

* tag 'jfs-6.6' of github.com:kleikamp/linux-shaggy:
  jfs: validate max amount of blocks before allocation.
  jfs: remove redundant initialization to pointer ip
  jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
  FS: JFS: (trivial) Fix grammatical error in extAlloc
  fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()

Pull ext4 updates from Ted Ts'o:
 "Many ext4 and jbd2 cleanups and bug fixes:

   - Cleanups in the ext4 remount code when going to and from read-only

   - Cleanups in ext4's multiblock allocator

   - Cleanups in the jbd2 setup/mounting code paths

   - Performance improvements when appending to a delayed allocation file

   - Miscellaneous syzbot and other bug fixes"

* tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
  ext4: fix slab-use-after-free in ext4_es_insert_extent()
  libfs: remove redundant checks of s_encoding
  ext4: remove redundant checks of s_encoding
  ext4: reject casefold inode flag without casefold feature
  ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
  ext4: do not mark inode dirty every time when appending using delalloc
  ext4: rename s_error_work to s_sb_upd_work
  ext4: add periodic superblock update check
  ext4: drop dio overwrite only flag and associated warning
  ext4: add correct group descriptors and reserved GDT blocks to system zone
  ext4: remove unused function declaration
  ext4: mballoc: avoid garbage value from err
  ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
  ext4: change the type of blocksize in ext4_mb_init_cache()
  ext4: fix unttached inode after power cut with orphan file feature enabled
  jbd2: correct the end of the journal recovery scan range
  ext4: ext4_get_{dev}_journal return proper error value
  ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
  jbd2: jbd2_journal_init_{dev,inode} return proper error return value
  jbd2: drop useless error tag in jbd2_journal_wipe()
  ...

Pull dlm updates from David Teigland:

 - Allow blocking posix lock requests to be interrupted while waiting.
   This requires a cancel request to be sent to the userspace daemon
   where posix lock requests are processed across the cluster.

 - Fix a posix lock patch from the previous cycle in which lock requests
   from different file systems could be mixed up.

 - Fix some long standing problems with nfs posix lock cancelation.

 - Add a new debugfs file for printing queued callbacks.

 - Stop modifying buffers that have been used to receive a message.

 - Misc cleanups and some refactoring.

* tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix plock lookup when using multiple lockspaces
  fs: dlm: don't use RCOM_NAMES for version detection
  fs: dlm: create midcomms nodes when configure
  fs: dlm: constify receive buffer
  fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy
  fs: dlm: drop rxbuf manipulation in dlm_copy_master_names
  fs: dlm: get recovery sequence number as parameter
  fs: dlm: cleanup lock order
  fs: dlm: remove clear_members_cb
  fs: dlm: add plock dev tracepoints
  fs: dlm: check on plock ops when exit dlm
  fs: dlm: debugfs for queued callbacks
  fs: dlm: remove unused processed_nodes
  fs: dlm: add missing spin_unlock
  fs: dlm: fix F_CANCELLK to cancel pending request
  fs: dlm: allow to F_SETLKW getting interrupted
  fs: dlm: remove twice newline

Pull more superblock follow-on fixes from Christian Brauner:
 "This contains two more small follow-up fixes for the super work this
  cycle. I went through all filesystems once more and detected two minor
  issues that still needed fixing:

   - Some filesystems support mtd devices (e.g., mount -t jffs2 mtd2
     /mnt). The mtd infrastructure uses the sb->s_mtd pointer to find an
     existing superblock. When the mtd device is put and sb->s_mtd
     cleared the superblock can still be found fs_supers and so this
     risks a use-after-free.

     Add a small patch that aligns mtd with what we did for regular
     block devices and switch keying to rely on sb->s_dev.

     (This was tested with mtd devices and jffs2 as xfstests doesn't
     support mtd devices.)

   - Switch nfs back to rely on kill_anon_super() so the superblock is
     removed from the list of active supers before sb->s_fs_info is
     freed"

* tag 'v6.6-vfs.super.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  NFS: switch back to using kill_anon_super
  mtd: key superblock by device number
  fs: export sget_dev()

Fix up missed semantic mis-merge between commits

  161e393c ("mm: Make pte_mkwrite() take a VMA")
  27af67f3 ("powerpc/book3s64/mm: enable transparent pud hugepage")

where the newly introduced powerpc use of 'pte_mkwrite()' needs to use
the 'novma()' versions as per commit 2f0584f3 ("mm: Rename arch
pte_mkwrite()'s to pte_mkwrite_novma()").

Fixes: df57721f ("Merge tag 'x86_shstk_for_6.6-rc1' of [...]")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mx3fb driver does not support devicetree and i.MX has been converted
to a DT-only platform since kernel 5.10.

As there is no user for this driver anymore, just remove it.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Convert list_for_each() to list_for_each_entry() so that the pos
list_head pointer and list_entry() call are no longer needed, which
can reduce a few lines of code. No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull ARM updates from Russell King:

 - Refactor VFP code and convert to C code (Ard Biesheuvel)

 - Fix hardware breakpoint single-stepping using bpf_overflow_handler

 - Make SMP stop calls asynchronous allowing panic from irq context to
   work

 - Fix for kernel-doc warnings for locomo

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  Revert part of ae1f8d79 ("ARM: 9304/1: add prototype for function called only from asm")
  ARM: 9318/1: locomo: move kernel-doc to prevent warnings
  ARM: 9317/1: kexec: Make smp stop calls asynchronous
  ARM: 9316/1: hw_breakpoint: fix single-stepping when using bpf_overflow_handler
  ARM: entry: Make asm coproc dispatch code NWFPE only
  ARM: iwmmxt: Use undef hook to enable coprocessor for task
  ARM: entry: Disregard Thumb undef exception in coproc dispatch
  ARM: vfp: Use undef hook for handling VFP exceptions
  ARM: kernel: Get rid of thread_info::used_cp[] array
  ARM: vfp: Reimplement VFP exception entry in C code
  ARM: vfp: Remove workaround for Feroceon CPUs
  ARM: vfp: Record VFP bounces as perf emulation faults

Pull powerpc updates from Michael Ellerman:

 - Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
   configured SMT state when hotplugging CPUs into the system

 - Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
   Radix MMU to avoid a broadcast TLBIE flush on exit

 - Drop the exclusion between ptrace/perf watchpoints, and drop the now
   unused associated arch hooks

 - Add support for the "nohlt" command line option to disable CPU idle

 - Add support for -fpatchable-function-entry for ftrace, with GCC >=
   13.1

 - Rework memory block size determination, and support 256MB size on
   systems with GPUs that have hotpluggable memory

 - Various other small features and fixes

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.

* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
  macintosh/ams: linux/platform_device.h is needed
  powerpc/xmon: Reapply "Relax frame size for clang"
  powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
  powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
  powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
  powerpc/mpc5xxx: Add missing fwnode_handle_put()
  powerpc/config: Disable SLAB_DEBUG_ON in skiroot
  powerpc/pseries: Remove unused hcall tracing instruction
  powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
  powerpc: dts: add missing space before {
  powerpc/eeh: Use pci_dev_id() to simplify the code
  powerpc/64s: Move CPU -mtune options into Kconfig
  powerpc/powermac: Fix unused function warning
  powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
  powerpc: Don't include lppaca.h in paca.h
  powerpc/pseries: Move hcall_vphn() prototype into vphn.h
  powerpc/pseries: Move VPHN constants into vphn.h
  cxl: Drop unused detach_spa()
  powerpc: Drop zalloc_maybe_bootmem()
  powerpc/powernv: Use struct opal_prd_msg in more places
  ...

Pull x86 shadow stack support from Dave Hansen:
 "This is the long awaited x86 shadow stack support, part of Intel's
  Control-flow Enforcement Technology (CET).

  CET consists of two related security features: shadow stacks and
  indirect branch tracking. This series implements just the shadow stack
  part of this feature, and just for userspace.

  The main use case for shadow stack is providing protection against
  return oriented programming attacks. It works by maintaining a
  secondary (shadow) stack using a special memory type that has
  protections against modification. When executing a CALL instruction,
  the processor pushes the return address to both the normal stack and
  to the special permission shadow stack. Upon RET, the processor pops
  the shadow stack copy and compares it to the normal stack copy.

  For more information, refer to the links below for the earlier
  versions of this patch set"

Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/

* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
  x86/shstk: Change order of __user in type
  x86/ibt: Convert IBT selftest to asm
  x86/shstk: Don't retry vm_munmap() on -EINTR
  x86/kbuild: Fix Documentation/ reference
  x86/shstk: Move arch detail comment out of core mm
  x86/shstk: Add ARCH_SHSTK_STATUS
  x86/shstk: Add ARCH_SHSTK_UNLOCK
  x86: Add PTRACE interface for shadow stack
  selftests/x86: Add shadow stack test
  x86/cpufeatures: Enable CET CR4 bit for shadow stack
  x86/shstk: Wire in shadow stack interface
  x86: Expose thread features in /proc/$PID/status
  x86/shstk: Support WRSS for userspace
  x86/shstk: Introduce map_shadow_stack syscall
  x86/shstk: Check that signal frame is shadow stack mem
  x86/shstk: Check that SSP is aligned on sigreturn
  x86/shstk: Handle signals for shadow stack
  x86/shstk: Introduce routines modifying shstk
  x86/shstk: Handle thread shadow stack
  x86/shstk: Add user-mode shadow stack support
  ...