- 27 Jun, 2005 31 commits
-
-
Malli Chilakala authored
Fixed register and loopback test failures with 82573 controllers Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
Cleanup debug message printed when Tx Unit hang is detected Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
Use netdev_priv() to get to netdev->priv - from shemminger@osdl.org Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
Use correct WOL settings for 82544 adapters Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
Synchronize phy access between stats update and MII_IOCTL Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
NAPI performance enhancements - Fixed issues with shared interrupts and NAPI resulting in bad performance. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
e100_eeprom_load was called after e100_phy_init causing phy_init not to use values set in EEPROM - from emann@mrv.com Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Malli Chilakala authored
Added patch from Eran Mann to fix following e100 MDI/MDI-X issues * MDI/MDI-X autodetection should never be enabled for 82551ER/QM chips * enabling this feature based on eeprom settings Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com>
-
Jeff Garzik authored
-
Jeff Garzik authored
-
Christoph Hellwig authored
Patch from Pavel Roskin
-
Christoph Hellwig authored
If the frame has ToDS flag set, mark it by setting skb->pkt_type to PACKET_OTHERHOST, so that applications unaware of promiscous mode won't get uplink (STA->AP) packets for STA->STA transmissions relayed by the AP. Thanks to John Denker and David Gibson for finding the problem and the solution. Patch from Pavel Roskin
-
Christoph Hellwig authored
Patch from Pavel Roskin
-
Christoph Hellwig authored
Patch from Pavel Roskin
-
Christoph Hellwig authored
I completely reimplemented this based on ethtool_ops, CVS has an ioctl-based version.
-
Christoph Hellwig authored
(patch from Moustafa Youssef, updated by Jim Carter and Pavel Roskin).
-
Christoph Hellwig authored
We need constants from this header in the next patches.
-
Christoph Hellwig authored
the prototypes and inlines aren't actually needed, but let's not diverge from -mm too far.
-
dmitry pervushin authored
This patch is to provide support for cs89x0-based network device on Philips' pnx0105 board. Signed-off-by: dmitry pervushin <dpervushin@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Adrian Bunk authored
This patch contains the following cleanups: - make needlessly global code static - remove the completely unused smtparse.c - remove the following unused global functions: - drvfbi.c: init_dma - drvfbi.c: dis_dma - drvfbi.c: get_rom_byte - drvfbi.c: mac_drv_vpd_read - drvfbi.c: mac_drv_pci_fix - fplustm.c: mac_set_func_addr - fplustm.c: mac_del_multicast - hwmtm.c: mac_drv_rx_frag - pcmplc.c: pcm_set_lct_short - smt.c: smt_please_reconnect - smt.c: smt_change_t_neg - smtdef.c: smt_set_defaults Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Hideki Yamane authored
-
Manfred Spraul authored
This is a multi-part message in MIME format.
-
Manfred Spraul authored
This is a multi-part message in MIME format.
-
Manfred Spraul authored
This is a multi-part message in MIME format.
-
Nishanth Aravamudan authored
Use ssleep() / msleep_interruptible() [as appropriate] instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org>
-
Nishanth Aravamudan authored
Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org>
-
Nishanth Aravamudan authored
Insert set_current_state() before schedule_timeout() so the function delays as expected. Without the addition, schedule_timeout() will return immediately. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org>
-
Nishanth Aravamudan authored
Use ssleep() instead of nicedelay() to guarantee the task delays as expected. Remove the prototype and definition of nicedelay(). This is a very weird function, because it is called to sleep in terms of usecs, but always sleeps for 1 second, completely ignoring the parameter. I have gone ahead and followed suit, just sleeping for a second in all cases, but maybe someone with the hardware could tell me if perhaps the paramter *should* matter. Additionally, nicedelay() is called in TASK_INTERRUPTIBLE state, but doesn't deal with signals in case these longer delays do not complete, so I believe ssleep() is more appropriate. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org>
-
Domen Puncer authored
This conversion makes code from line 7101 right: if (copy_to_user(com.data, swversion, sizeof(swversion))) size output (before, after): 55416 2228 160 57804 e1cc drivers/net/wireless/airo.o 55412 2228 160 57800 e1c8 drivers/net/wireless/airo.o more outputs from Alexey Dobriyan: 2.95.3: text data bss dec hex filename before 51118 2156 160 53434 d0ba drivers/net/wireless/airo.o after 51118 2156 160 53434 d0ba drivers/net/wireless/airo.o 3.3.5-20050130: before 46999 2156 160 49315 c0a3 drivers/net/wireless/airo.o after 46994 2156 160 49310 c09e drivers/net/wireless/airo.o 4.1.0-20050522: before 45555 2220 160 47935 bb3f drivers/net/wireless/airo.o after 45550 2220 160 47930 bb3a drivers/net/wireless/airo.o Signed-off-by: Domen Puncer <domen@coderock.org>
-
Linus Torvalds authored
-
- 26 Jun, 2005 9 commits
-
-
pageexec authored
From: <pageexec@freemail.hu> $subject was fixed in 2.4 already, 2.6 needs it as well. The impact of the bugs is a kernel stack overflow and privilege escalation from CAP_NET_ADMIN via the IP_VS_SO_SET_STARTDAEMON/IP_VS_SO_GET_DAEMON ioctls. People running with 'root=all caps' (i.e., most users) are not really affected (there's nothing to escalate), but SELinux and similar users should take it seriously if they grant CAP_NET_ADMIN to other users. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sascha Hauer authored
This patch fixes two bugs in the dm9000 network driver: - Don't read one byte too much in 8bit mode. - release correct resource Signed-off-by: Jochen Karrer <j.karrer@lightmaze.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Ismail Donmez authored
Patch indents dmfe.txt to look like other docs. It adds a tip about CNET cards using Davicom chipsets. Also it removes parts where it refers to how to build driver out-of-kernel which seems to be cruft from times where the driver was out of the kernel. Signed-off-by: Ismail Donmez <ismail@kde.org.tr> Signed-off-by: Domen Puncer <domen@coderock.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Denis Vlasenko authored
Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Pavel Machek authored
Fix int vs. pm_message_t confusion in airo. Should change no code. Signed-off-by: Pavel Machek <pavel@suse.cz> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Maciej W. Rozycki authored
This is a fix for the interrupt handler in the defxx driver to use irqreturn_t. Beside the obvious fix of returning a proper status at all, it actually checks board registers as appropriate for determining if an interrupt has been recorded in the bus-specific interface logic. The patch also includes an obvious one-line fix for SET_NETDEV_DEV needed for the EISA variation, for which I've decided there is no point in sending separately. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Andrew Morton authored
drivers/net/tulip/dmfe.c: In function `dmfe_parse_srom': drivers/net/tulip/dmfe.c:1805: warning: passing arg 1 of `__le16_to_cpup' from incompatible pointer type drivers/net/tulip/dmfe.c:1817: warning: passing arg 1 of `__le32_to_cpup' from incompatible pointer type drivers/net/tulip/dmfe.c:1817: warning: passing arg 1 of `__le32_to_cpup' from incompatible pointer type This is basically a guess: Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
-
Adrian Bunk authored
The 8129/8130 support is a sub-option that is not visible if the user hasn't enabled the 8139 support. Let's make it a bit easier for users to find the driver for their nic. Signed-off-by: Adrian Bunk <bunk@stusta.de>
-
David S. Miller authored
1) netlink_release() should only decrement the hash entry count if the socket was actually hashed. This was causing hash->entries to underflow, which resulting in all kinds of troubles. On 64-bit systems, this would cause the following conditional to erroneously trigger: err = -ENOMEM; if (BITS_PER_LONG > 32 && unlikely(hash->entries >= UINT_MAX)) goto err; 2) netlink_autobind() needs to propagate the error return from netlink_insert(). Otherwise, callers will not see the error as they should and thus try to operate on a socket with a zero pid, which is very bad. However, it should not propagate -EBUSY. If two threads race to autobind the socket, that is fine. This is consistent with the autobind behavior in other protocols. So bug #1 above, combined with this one, resulted in hangs on netlink_sendmsg() calls to the rtnetlink socket. We'd try to do the user sendmsg() with the socket's pid set to zero, later we do a socket lookup using that pid (via the value we stashed away in NETLINK_CB(skb).pid), but that won't give us the user socket, it will give us the rtnetlink socket. So when we try to wake up the receive queue, we dive back into rtnetlink_rcv() which tries to recursively take the rtnetlink semaphore. Thanks to Jakub Jelink for providing backtraces. Also, thanks to Herbert Xu for supplying debugging patches to help track this down, and also finding a mistake in an earlier version of this fix. Signed-off-by: David S. Miller <davem@davemloft.net>
-