When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.

Fixes: c8609f38 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.

Fixes: af2618a2 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: c8609f38 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: af2618a2 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.

Fixes: b65c4662 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is error message when defer probe happens:

fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable!

Fix the error handler with pm_runtime_enable.

Fixes: b73d9e62 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

When flag mclk_with_tere and mclk_direction_output enabled,
The SAI transmitter or receiver will be enabled in very early
stage, that if FSL_SAI_xMR is set by previous case,
for example previous case is one channel, current case is
two channels, then current case started with wrong xMR in
the beginning, then channel swap happen.

The patch is to clear xMR in hw_free() to avoid such
channel swap issue.

Fixes: 3e4a8261 ("ASoC: fsl_sai: MCLK bind with TX/RX enable bit")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://msgid.link/r/1702953057-4499-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

This fixes a problem introduced while fixing ELD reporting with no jack
set.

Most driver using the hdmi-codec will call the 'plugged_cb' callback
directly when registered to report the initial state of the HDMI connector.

With the commit mentionned, this occurs before jack is ready and the
initial report is lost for platforms actually providing a jack for HDMI.

Fix this by storing the hdmi connector status regardless of jack being set
or not and report the last status when jack gets set.

With this, the initial state is reported correctly even if it is
disconnected. This was not done initially and is also a fix.

Fixes: 15be353d ("ASoC: hdmi-codec: register hpd callback on component probe")
Reported-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Closes: https://lore.kernel.org/alsa-devel/CADYyEwTNyY+fR9SgfDa-g6iiDwkU3MUdPVCYexs2_3wbcM8_vg@mail.gmail.com/
Cc: Hsin-Yi Wang <hsinyi@google.com>
Tested-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://msgid.link/r/20231218145655.134929-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some BYTCR x86 tablets with a rt5640 codec have the left and right channels
of their speakers swapped.

Add a new BYT_RT5640_SWAPPED_SPEAKERS quirk for this which sets
cfg-spk:swapped in the components string to let userspace know
about the swapping so that the UCM profile can configure the mixer
to correct this.

Enable this new quirk on the Medion Lifetab S10346 which has its
speakers swapped.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-2-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add a quirk for the Medion Lifetab S10346, this BYTCR tablet has no CHAN
package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which
is the default for BYTCR devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20231217213221.49424-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add additional checks for program/config numbers to avoid loading from
invalid addresses.

If prm_no/cfg_no is negative, skip uploading program/config.

The tas2781-hda driver caused a NULL pointer dereference after loading
module, and before first runtime_suspend.

the state was:
tas_priv->cur_conf = -1;
tas_priv->tasdevice[i].cur_conf = 0;
program = &(tas_fmw->programs[-1]);

BUG: kernel NULL pointer dereference, address: 0000000000000010
Call Trace:
 <TASK>
 ? __die+0x23/0x70
 ? page_fault_oops+0x171/0x4e0
 ? vprintk_emit+0x175/0x2b0
 ? exc_page_fault+0x7f/0x180
 ? asm_exc_page_fault+0x26/0x30
 ? tasdevice_load_block_kernel+0x21/0x310 [snd_soc_tas2781_fmwlib]
 tasdevice_select_tuningprm_cfg+0x268/0x3a0 [snd_soc_tas2781_fmwlib]
 tasdevice_tuning_switch+0x69/0x710 [snd_soc_tas2781_fmwlib]
 tas2781_hda_playback_hook+0xd4/0x110 [snd_hda_scodec_tas2781_i2c]

Fixes: 915f5ead ("ASoC: tas2781: firmware lib")
CC:  <stable@vger.kernel.org>
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://msgid.link/r/523780155bfdca9bc0acd39efc79ed039454818d.1702591356.git.soyer@irl.huSigned-off-by: Mark Brown <broonie@kernel.org>

Alas on some headsets the bias sense can cause problems with the
type detection. It can occasionally be falsely triggered by the type
detect itself and as the clamp is applied when this happens, it will
cause a headset to be incorrectly identified as headphones. As
such it should be disabled whilst running type detect. This does
mean a jack removal during type detect will cause a larger click
but that is unfortunately unavoidable.

Fixes: 1e4ce0d5 ("ASoC: cs42l43: Move headset bias sense enable earlier in process")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20231211160019.2034442-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change the ALSA prefix for the CS35L56 to "AMPn".

This keeps them consistent with the CS35L56 HDA driver. It also
avoids coding the chip ID into the control name, so that other
Cirrus amps with the same controls can have the same control
names.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 05fe6284 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c")
Link: https://msgid.link/r/20231205115715.2460386-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Masks the "DSP Virtual Mailbox 2 write" interrupt when before
issuing the hibernate command to the DSP. The interrupt is
unmasked when exiting runtime suspend as it is required for
DSP operation.

Without this change the DSP fires an interrupt when hibernating
causing the system spin between runtime suspend and runtime
resume.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-4-rriveram@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the SYSTEM_SLEEP_PM_OPS handlers to prevent handling an IRQ
when the system is in the middle of suspending or resuming.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-3-rriveram@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.

Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.

Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-2-rriveram@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

This reverts commit 505c8321.

This is not an official topology from the SOF project. Topologies are
named based on the card configuration and are NOT board specific.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20231205220131.2585913-1-cujomalainey@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from srinivas.kandagatla@linaro.org:

Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.

Apart from this there is also a range check fix in snd_soc_limit_volume
to allow setting this limit correctly.

Tested on Lenovo X13s.

Limit the speaker digital gains to 0dB so that the users will not damage them.
Currently there is a limit in UCM, but this does not stop the user form
changing the digital gains from command line. So limit this in driver
which makes the speakers more safer without active speaker protection in
place.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Volume can have ranges that start with negative values, ex: -84dB to
+40dB. Apply correct range check in snd_soc_limit_volume before setting
the platform_max. Without this patch, for example setting a 0dB limit on
a volume range of -84dB to +40dB would fail.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231204124736.132185-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When wm_adsp_buffer_read() fails, we should free buf->regions.
Otherwise, the callers of wm_adsp_buffer_populate() will
directly free buf on failure, which makes buf->regions a leaked
memory.

Fixes: a792af69 ("ASoC: wm_adsp: Refactor compress stream initialisation")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231204074158.12026-1-dinghao.liu@zju.edu.cnSigned-off-by: Mark Brown <broonie@kernel.org>

Change the default MIC detection impedance threshold to 200ohm
to support low mic DC impedance headset.
Signed-off-by: David Rau <David.Rau.opensource@dm.renesas.com>
Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This commit adds support for Huawei MateBook D16 2021
with Ryzen 4600H in driver acp3x-es83xx.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://lore.kernel.org/r/20231202223001.8025-1-posteuca@mutex.oneSigned-off-by: Mark Brown <broonie@kernel.org>

Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten

To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not  register the HDMI dais.

Depends-on: 3d1dc8b1 ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available")
Link: https://github.com/thesofproject/linux/issues/4509Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The -1 value for active_decimator[dai_id] is considered as "not set",
but at probe the table is initialized a 0, this prevents enabling the
DEC0 Mixer since it will be considered as already set.

Initialize the table entries as -1 to fix tx_macro_tx_mixer_put().

Fixes: 1c6a7f52 ("ASoC: codecs: tx-macro: fix active_decimator array")
Fixes: c1057a08 ("ASoC: codecs: tx-macro: fix kcontrol put")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231116-topic-sm8x50-upstream-tx-macro-fix-active-decimator-set-v1-1-6edf402f4b6f@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds ASUSTeK COMPUTER INC  "E1504FA" to the quirks file acp6x-mach.c
to enable microphone array on ASUS Vivobook GO 15.
I have this laptop and can confirm that the patch succeeds in enabling the
microphone array.
Signed-off-by: Malcolm Hart <malcolm@5harts.com>
Cc: stable@vger.kernel.org
Rule: add
Link: https://lore.kernel.org/stable/875y1nt1bx.fsf%405harts.com
Link: https://lore.kernel.org/r/871qcbszh0.fsf@5harts.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add pang13 quirk to enable the internal microphone.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20231127184237.32077-2-tcrawford@system76.comSigned-off-by: Mark Brown <broonie@kernel.org>

SND_SOC_IMX_RPMSG should depend on OF and I2C. It fixes the following
error reported by kernel test robot:

ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x4f): undefined reference to `i2c_find_device_by_fwnode'

Fixes: 5d9f746c ("ASoC: imx-rpmsg: Force codec power on in low power audio mode")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311230506.DPF9vvYY-lkp@intel.com/Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20231125065300.6385-1-chancel.liu@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The topology files for SDW devices require HDMI dai links to be present and
this is granted under normal conditions but in case of special use cases
the display (i915) driver might not be enabled due to deny-listing,
booting with nomodeset or just not compiled at all.

This should not block the non HDMI audio to be usable so register the dai
links unconditionally. The code has been prepared for this and in case of
no HDMI audio the link is created with dummy codec.

Closes: https://github.com/thesofproject/linux/issues/4594
Closes: https://github.com/thesofproject/linux/issues/4648Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124032.15946-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

When the HDMI is not present due to disabled display support
we will use dummy codec and the HDMI routes will refer to non existent
DAPM widgets.

Trim the route list from the HDMI routes to be able to probe the card even
if the HDMI dais are not registered.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.

The relation of phy clock is:
    sai_pll_ref_sel
       sai_pll
          sai_pll_bypass
             sai_pll_out
                sai_pll_out_div2
                   earc_phy_cg
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the machine compatible and topology filename for the Google Steelix
MT8186 Chromebook to load the correct SOF topology file.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123084454.20471-1-angelogioacchino.delregno@collabora.comSigned-off-by: Mark Brown <broonie@kernel.org>

A recent change to address pops and clicks with codecs like WSA883X
touched the same code paths as a fix for clearing DAI parameters and
resulted in a bad merge.

Specifically, commit f0220575 ("ASoC: soc-dai: add flag to mute and
unmute stream during trigger") made mute at stream close conditional,
while commit 3efcb471 ("ASoC: soc-pcm.c: Make sure DAI parameters
cleared if the DAI becomes inactive") moved that same mute call back to
soc_pcm_hw_clean().

Fix up the bad merge by dropping the second mute call from
soc_pcm_clean() and making sure that the call in soc_pcm_hw_clean() is
conditional as intended.

Fixes: bdb7e192 ("ASoC: Merge up workaround for CODECs that play noise on stopped stream")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231123091815.21933-1-johan+linaro@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds the jd_mutex to protect the jack detection control flow.
And only the headset type could check the button status.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.

As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>