- 29 Jun, 2015 2 commits
-
-
Frank Praznik authored
[ Upstream commit 68a49e51 ] Add vid/pid for the SMK branded third-party PS3 Bluetooth remote and enable support in the hid-sony driver. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Kenneth Graunke authored
[ Upstream commit 94411593 ] Haswell significantly improved the performance of sampler_c messages, but the optimization appears to be off by default. Later platforms remove this bit, and apparently always enable the optimization. Improves performance in "Counter Strike: Global Offensive" by 18% at default settings on Iris Pro. This may break sampling of paletted formats (P8/A8P8/P8A8). It's unclear whether it affects sampling of paletted formats in general, or just the sample_c message (which is never used). While libva does have support for using paletted formats (primarily for OSDs), that support appears to have been broken for at least a year, so I couldn't observe a regression from this: I tried to get libva-intel to use paletted formats, and observe a regression...but the only thing I found that used it was mplayer's OSD (on screen display). Even without my patch, the colors were totally wrong with that, and it's according to a few distro wikis, that's been the case for over a year. If libva's code for paletted formats /is/ broken, they could always add code to disable this bit using the command validator when fixing it. Further investigation from Haihao shows that libva mplayer OSD seems to work at least on his setup (still unclear what's wron with Ken's), and that it's not affected by this patch. Quoting the discussion between Haihao and Ken: > > > If you use "-vo gl" or "-vo xv", the OSD is solid white text with a black > > > border around it. I presume that it's supposed to be white with vaapi as > > > well, but I guess I'm not entirely sure. > > > > > > It's possible that the optimization doesn't affect the palette as long as > > > you never use sample_c with the paletted textures. > > > > I verified the palette takes effect in the following way: > > > > 1. Only support P8A8 format in the driver > > > > 2. ran the above command and I saw white OSD text > > > > 3. Only support P4A4 format in the driver and don't use > > 3DSTATE_SAMPLER_PALETTE_LOAD0 to load the value to the texture palette, > > so the palette keeps unchanged. > > > > 4. ran the above command and I saw black OSD text. > > > > 5. Load the right value to the texture palette and ran the above command > > again, I saw white OSD text. > > > > Hence I think sample_c with the paletted textures is used in the driver. > > That sounds like the palette is actually working, then. Great :) > > I doubt that libva would use sample_c - sampling with a shadow comparison? > It looks like it just uses sample and sample+killpix. You are right, libva driver doesn't use sample_c message. > I'm pretty sure the sample_c optimization just uses the palette memory as > storage for some stuff, so it's quite possible it just works if you're > only using sample and sample+killpix. Thanks for the explanation, it makes sense to me. Signed-off-by: Kenneth Graunke <kenneth@whitecape.org> [danvet: Add wa name from Ville's review to the comment and copypaste the explanation why we don't care about libva (already broken) from Ken. Also add conclusion from libva devs that&why this is all fine.] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: "Xiang, Haihao" <haihao.xiang@intel.com> Cc: libva@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
- 28 Jun, 2015 38 commits
-
-
Sasha Levin authored
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Linus Torvalds authored
[ Upstream commit dd369297 ] The use of READ_ONCE() causes lots of warnings witht he pending paravirt spinlock fixes, because those ends up having passing a member to a 'const' structure to READ_ONCE(). There should certainly be nothing wrong with using READ_ONCE() with a const source, but the helper function __read_once_size() would cause warnings because it would drop the 'const' qualifier, but also because the destination would be marked 'const' too due to the use of 'typeof'. Use a union of types in READ_ONCE() to avoid this issue. Also make sure to use parenthesis around the macro arguments to avoid possible operator precedence issues. Tested-by: Ingo Molnar <mingo@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ben Serebrin authored
[ Upstream commit 085e68ee ] The host's decision to enable machine check exceptions should remain in force during non-root mode. KVM was writing 0 to cr4 on VCPU reset and passed a slightly-modified 0 to the vmcs.guest_cr4 value. Tested: Built. On earlier version, tested by injecting machine check while a guest is spinning. Before the change, if guest CR4.MCE==0, then the machine check is escalated to Catastrophic Error (CATERR) and the machine dies. If guest CR4.MCE==1, then the machine check causes VMEXIT and is handled normally by host Linux. After the change, injecting a machine check causes normal Linux machine check handling. Signed-off-by: Ben Serebrin <serebrin@google.com> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Andy Lutomirski authored
[ Upstream commit 1e02ce4c ] Context switches and TLB flushes can change individual bits of CR4. CR4 reads take several cycles, so store a shadow copy of CR4 in a per-cpu variable. To avoid wasting a cache line, I added the CR4 shadow to cpu_tlbstate, which is already touched in switch_mm. The heaviest users of the cr4 shadow will be switch_mm and __switch_to_xtra, and __switch_to_xtra is called shortly after switch_mm during context switch, so the cacheline is likely to be hot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/3a54dd3353fffbf84804398e00dfdc5b7c1afd7d.1414190806.git.luto@amacapital.netSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Andy Lutomirski authored
[ Upstream commit 375074cc ] CR4 manipulation was split, seemingly at random, between direct (write_cr4) and using a helper (set/clear_in_cr4). Unfortunately, the set_in_cr4 and clear_in_cr4 helpers also poke at the boot code, which only a small subset of users actually wanted. This patch replaces all cr4 access in functions that don't leave cr4 exactly the way they found it with new helpers cr4_set_bits, cr4_clear_bits, and cr4_set_bits_and_update_boot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/495a10bdc9e67016b8fd3945700d46cfd5c12c2f.1414190806.git.luto@amacapital.netSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Pelle Nilsson authored
[ Upstream commit 7d0ec8b6 ] Some controller drivers have no need of this callback (spi-altera even causes a NULL pointer dereference because it doesn't register the callback, falsely assuming that it is already optional). Fixes: 30af9b55 ("spi/bitbang: Drop empty setup() functions") Signed-off-by: Pelle Nilsson <per.nilsson@xelmo.com> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@vanguardiasur.com.ar> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Arnd Bergmann authored
[ Upstream commit 7d3beab1 ] This driver uses '#ifdef CONFIG_ARCH_SHMOBILE' and '#ifdef CONFIG_ARM' interchangeably in its sh_dmae_probe function, which causes a build warning when building for ARM without also enabling shmobile: dma/sh/shdmac.c: In function sh_dmae_probe: dma/sh/shdmac.c:696:6: warning: unused variable errirq [-Wunused-variable] dma/sh/shdmac.c:695:16: warning: unused variable irqflags [-Wunused-variable] dma/sh/shdmac.c: At top level: dma/sh/shdmac.c:447:20: warning: sh_dmae_err defined but not used [-Wunused-function] This changes all the #ifdef to test for CONFIG_ARCH_SHMOBILE to avoid that warning. An earlier patch from Laurent had fixed the warning for non-ARM case, but it still remained present in ARM randconfig builds. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 52d6a5ee ("DMA: shdma: Fix warnings due to declared but unused symbols") Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric Dumazet authored
[ Upstream commit fad9dfef ] tcp_get_info() can be called without holding socket lock, so any socket fields can change under us. Use READ_ONCE() to fetch sk_pacing_rate and sk_max_pacing_rate Fixes: 977cb0ec ("tcp: add pacing_rate information into tcp_info") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Roy Franz authored
[ Upstream commit 98b228f5 ] Until now, the EFI stub was only setting the 32 bit cmd_line_ptr in the setup_header structure, so on 64 bit platforms this could be truncated. This patch adds setting the upper bits of the buffer address in ext_cmd_line_ptr. This case was likely never hit, as the allocation for this buffer is done at the lowest available address. Only x86_64 kernels have this problem, as the 1-1 mapping mandated by EFI ensures that all memory is 32 bit addressable on 32 bit platforms. The EFI stub does not support mixed mode, so the 32 bit kernel on 64 bit firmware case does not need to be handled. Signed-off-by: Roy Franz <roy.franz@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ross Lagerwall authored
[ Upstream commit c57dcb56 ] Some buggy firmware implementations update VariableNameSize on success such that it does not include the final NUL character which results in garbage in the efivarfs name entries. Use kzalloc on the efivar_entry (as is done in efivars.c) to ensure that the name is always NUL-terminated. The buggy firmware is: BIOS Information Vendor: Intel Corp. Version: S1200RP.86B.02.02.0005.102320140911 Release Date: 10/23/2014 BIOS Revision: 4.6 System Information Manufacturer: Intel Corporation Product Name: S1200RP_SE Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Matthew Garrett <mjg59@coreos.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: <stable@vger.kernel.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Iooss authored
[ Upstream commit d43698e8 ] Commit 2473238e ("ihex: add support for CS:IP/EIP records") removes the "default:" statement in the switch block, making the "return usage();" line dead code and ihex2fw silently ignoring unknown options. Restore this statement. This bug was found by building with HOSTCC=clang and adding -Wunreachable-code-return to HOSTCFLAGS. Fixes: 2473238e ("ihex: add support for CS:IP/EIP records") Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Honggang LI authored
[ Upstream commit 59d2d18c ] If CONFIG_ARCH_DMA_ADDR_T_64BIT enabled for x86 systems and physical memory is more than 4GB, dma_map_page may return a valid memory address which greater than 0xffffffff. As a result, the mlx5 device page allocator RB tree will be initialized with valid addresses greater than 0xfffffff. However, (addr & PAGE_MASK) set the high four bytes to zeros. So, it's impossible for the function, free_4k, to release the pages whose addresses greater than 4GB. Memory leaks. And mlx5_ib module can't release the pages when user try to remove the module, as a result, system hang. [root@rdma05 root]# dmesg | grep addr | head addr = 3fe384000 addr & PAGE_MASK = fe384000 [root@rdma05 root]# rmmod mlx5_ib <---- hang on ---------------------- cosnole log ----------------- mlx5_ib 0000:04:00.0: irq 138 for MSI/MSI-X alloc irq_desc for 139 on node -1 alloc kstat_irqs on node -1 mlx5_ib 0000:04:00.0: irq 139 for MSI/MSI-X 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found 0000:04:00.0:free_4k:221:(pid 1519): page not found ---------------------- cosnole log ----------------- Fixes: bf0bf77f ('mlx5: Support communicating arbitrary host page size to firmware') Signed-off-by: Honggang Li <honli@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit bd2cba07 ] This command is missing. Fixes: 3a2dfbe8 ("xfrm: Notify changes in UDP encapsulation via netlink") CC: Martin Willi <martin@strongswan.org> Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 8d465bb7 ] This command is missing. Fixes: 5c79de6e ("[XFRM]: User interface for handling XFRM_MSG_MIGRATE") Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit b0b59b00 ] This command is missing. Fixes: 97a64b45 ("[XFRM]: Introduce XFRM_MSG_REPORT.") Reported-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric W. Biederman authored
[ Upstream commit f53e5797 ] lookup_mountpoint can return either NULL or an error value. Update the test in __detach_mounts to test for an error value to avoid pathological cases causing a NULL pointer dereferences. The callers of __detach_mounts should prevent it from ever being called on an unlinked dentry but don't take any chances. Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Aravind Gopalakrishnan authored
[ Upstream commit b4491592 ] The comment line regarding IOMMU_INIT and IOMMU_INIT_FINISH macros is incorrect: "The standard vs the _FINISH differs in that the _FINISH variant will continue detecting other IOMMUs in the call list..." It should be "..the *standard* variant will continue detecting..." Fix that. Also, make it readable while at it. Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: konrad.wilk@oracle.com Fixes: 6e963669 ("x86, iommu: Update header comments with appropriate naming") Link: http://lkml.kernel.org/r/1428508017-5316-1-git-send-email-Aravind.Gopalakrishnan@amd.comSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 5b5800fa ] These commands are missing. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 5e6deeba ] This command is missing. Fixes: ecfd6b18 ("[XFRM]: Export SPD info") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Nicolas Dichtel authored
[ Upstream commit 2b7834d3 ] This new command is missing. Fixes: 880a6fab ("xfrm: configure policy hash table thresholds by netlink") Reported-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Sowmini Varadhan authored
[ Upstream commit ebe96e64 ] AF_RDS, PF_RDS and SOL_RDS are available in header files, and there is no need to get their values from /proc. Document this correctly. Fixes: 0c5f9b88 ("RDS: Documentation") Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Arnd Bergmann authored
[ Upstream commit 9b174527 ] In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes: 7b34be71 ("[media] use IS_ENABLED() macro") See-also: c5dec9fb ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Felipe Balbi authored
[ Upstream commit 74bd7b69 ] Make sure we're using the new macro, so our resume signaling will always pass certification. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Yao Xiwei authored
[ Upstream commit 092a29a4 ] When the kernel deleted a vti6 interface, this interface was not removed from the tunnels list. Thus, when the ip6_vti module was removed, this old interface was found and the kernel tried to delete it again. This was leading to a kernel panic. Fixes: 61220ab3 ("vti6: Enable namespace changing") Signed-off-by: Yao Xiwei <xiwei.yao@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Alexander Duyck authored
[ Upstream commit 2e7056c4 ] Looking over the implementation for jhash2 and comparing it to jhash_3words I realized that the two hashes were in fact very different. Doing a bit of digging led me to "The new jhash implementation" in which lookup2 was supposed to have been replaced with lookup3. In reviewing the patch I noticed that jhash2 had originally initialized a and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and c were initialized to initval + (length << 2) + JHASH_INITVAL. However the changes in jhash_3words simply replaced the initialization of a and b with JHASH_INITVAL. This change corrects what I believe was an oversight so that a, b, and c in jhash_3words all have the same value added consisting of initval + (length << 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the same hash result given the same inputs. Fixes: 60d509c8 ("The new jhash implementation") Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Konstantin Khlebnikov authored
[ Upstream commit 7071b715 ] Release references to buffer-heads if ext4_journal_start() fails. Fixes: 5b61de75 ("ext4: start handle at least possible moment when renaming files") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Daniel Borkmann authored
[ Upstream commit afb77180 ] While originally only being intended for outgoing traffic, commit a00e7634 ("netfilter: x_tables: allow to use cgroup match for LOCAL_IN nf hooks") enabled xt_cgroups for the NF_INET_LOCAL_IN hook as well, in order to allow for nfacct accounting. Besides being currently limited to early demuxes only, commit a00e7634 forgot to add a check if we deal with full sockets, i.e. in this case not with time wait sockets. TCP time wait sockets do not have the same memory layout as full sockets, a lower memory footprint and consequently also don't have a sk_classid member; probing for sk_classid member there could potentially lead to a crash. Fixes: a00e7634 ("netfilter: x_tables: allow to use cgroup match for LOCAL_IN nf hooks") Cc: Alexey Perevalov <a.perevalov@samsung.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric Dumazet authored
[ Upstream commit 1d0ab253 ] We have many places where we want to check if a socket is not a timewait or request socket. Use a helper to avoid hard coding this. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Eric Dumazet authored
[ Upstream commit 10feb428 ] TCP_SYN_RECV state is currently used by fast open sockets. Initial TCP requests (the pseudo sockets created when a SYN is received) are not yet associated to a state. They are attached to their parent, and the parent is in TCP_LISTEN state. This commit adds TCP_NEW_SYN_RECV state, so that we can convert TCP stack to a different schem gradually. This state is not exported to user space. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Chuck Lever authored
[ Upstream commit 41f97028 ] If a provider advertizes a zero max_fast_reg_page_list_len, FRWR depth detection loops forever. Instead of just failing the mount, try other memory registration modes. Fixes: 0fc6c4e7 ("xprtrdma: mind the device's max fast . . .") Reported-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Tested-by: Devesh Sharma <Devesh.Sharma@Emulex.Com> Tested-by: Meghana Cheripady <Meghana.Cheripady@Emulex.Com> Tested-by: Veeresh U. Kokatnur <veereshuk@chelsio.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Chuck Lever authored
[ Upstream commit 7bc7972c ] Device attributes are large, and are used in more than one place. Stash a copy in dynamically allocated memory. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
David Daney authored
[ Upstream commit fdc81b79 ] Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Ken Xue authored
[ Upstream commit 5ef86b74 ] Add ACPI identifier for UART on AMD SOC Carrizo. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Feng Kan authored
[ Upstream commit 5e1aeea5 ] Enable APM X-Gene SoC serial port functionality when using ACPI table to initialize serial port. Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Rafael J. Wysocki authored
[ Upstream commit b31384fa ] Add a uniform interface by which device drivers can request device properties from the platform firmware by providing a property name and the corresponding data type. The purpose of it is to help to write portable code that won't depend on any particular platform firmware interface. The following general helper functions are added: device_property_present() device_property_read_u8() device_property_read_u16() device_property_read_u32() device_property_read_u64() device_property_read_string() device_property_read_u8_array() device_property_read_u16_array() device_property_read_u32_array() device_property_read_u64_array() device_property_read_string_array() The first one allows the caller to check if the given property is present. The next 5 of them allow single-valued properties of various types to be retrieved in a uniform way. The remaining 5 are for reading properties with multiple values (arrays of either numbers or strings). The interface covers both ACPI and Device Trees. This change set includes material from Mika Westerberg and Aaron Lu. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Mika Westerberg authored
[ Upstream commit ffdcd955 ] Device Tree is used in many embedded systems to describe the system configuration to the OS. It supports attaching properties or name-value pairs to the devices it describe. With these properties one can pass additional information to the drivers that would not be available otherwise. ACPI is another configuration mechanism (among other things) typically seen, but not limited to, x86 machines. ACPI allows passing arbitrary data from methods but there has not been mechanism equivalent to Device Tree until the introduction of _DSD in the recent publication of the ACPI 5.1 specification. In order to facilitate ACPI usage in systems where Device Tree is typically used, it would be beneficial to standardize a way to retrieve Device Tree style properties from ACPI devices, which is what we do in this patch. If a given device described in ACPI namespace wants to export properties it must implement _DSD method (Device Specific Data, introduced with ACPI 5.1) that returns the properties in a package of packages. For example: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"name1", <VALUE1>}, Package () {"name2", <VALUE2>}, ... } }) The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301 and is documented in the ACPI 5.1 companion document called "_DSD Implementation Guide" [1], [2]. We add several helper functions that can be used to extract these properties and convert them to different Linux data types. The ultimate goal is that we only have one device property API that retrieves the requested properties from Device Tree or from ACPI transparent to the caller. [1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm [2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdfReviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
David Woodhouse authored
[ Upstream commit 18436afd ] Commit c875d2c1 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API domains") prevents certain options for devices with RMRRs. This even prevents those devices from getting a 1:1 mapping with 'iommu=pt', because we don't have the code to handle *preserving* the RMRR regions when moving the device between domains. There's already an exclusion for USB devices, because we know the only reason for RMRRs there is a misguided desire to keep legacy keyboard/mouse emulation running in some theoretical OS which doesn't have support for USB in its own right... but which *does* enable the IOMMU. Add an exclusion for graphics devices too, so that 'iommu=pt' works there. We should be able to successfully assign graphics devices to guests too, as long as the initial handling of stolen memory is reconfigured appropriately. This has certainly worked in the past. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-
Laura Abbott authored
[ Upstream commit 849eca7b ] Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing errors: [791759.606542] usb 1-5.4: input irq status -75 received [791759.614537] usb 1-5.4: input irq status -75 received [791759.622542] usb 1-5.4: input irq status -75 received Add it. Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-