- 21 Aug, 2021 16 commits
-
-
Colin Ian King authored
Don't populate arrays the stack but instead make them static const. Replace array channel_info with channel_all since it contains the same data as channel_all. Makes object code smaller by 961 bytes. Before: text data bss dec hex filename 128147 44250 1024 173421 2a56d ../realtek/rtlwifi/rtl8192de/phy.o After text data bss dec hex filename 127122 44314 1024 172460 2a1ac ../realtek/rtlwifi/rtl8192de/phy.o (gcc version 10.2.0) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210803144949.79433-2-colin.king@canonical.com
-
Colin Ian King authored
The variables rtstatus and place are being initialized with a values that are never read, the initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Dan Carpenter authored
Return -ENODEV instead of success for unsupported devices. Fixes: 54fdb318 ("rsi: add new device model for 9116") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
This code returns success if the kmemdup() fails, but obviously it should return -ENOMEM instead. Fixes: e5a1ecc9 ("rsi: add firmware loading for 9116 device") Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Split memcpy() for each address range to help memcpy() correctly reason about the bounds checking. Avoids the future warning: In function 'fortify_memcpy_chk', inlined from 'memcpy_toio' at ./include/asm-generic/io.h:1204:2, inlined from 'ray_build_header.constprop' at drivers/net/wireless/ray_cs.c:984:3: ./include/linux/fortify-string.h:285:4: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 285 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. libipw_read_qos_param_element() copies a struct libipw_info_element into a struct libipw_qos_information_element, but is actually wanting to copy into the larger struct libipw_qos_parameter_info (the contents of ac_params_record[] is later examined). Refactor the routine to perform centralized checks, and copy the entire contents directly (since the id and len members match the elementID and length members): struct libipw_info_element { u8 id; u8 len; u8 data[]; } __packed; struct libipw_qos_information_element { u8 elementID; u8 length; u8 qui[QOS_OUI_LEN]; u8 qui_type; u8 qui_subtype; u8 version; u8 ac_info; } __packed; struct libipw_qos_parameter_info { struct libipw_qos_information_element info_element; u8 reserved; struct libipw_qos_ac_parameter ac_params_record[QOS_QUEUE_NUM]; } __packed; Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: -
Len Baker authored
Dynamic size calculations (especially multiplication) should not be performed in memory allocator function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. To avoid this scenario, use the struct_size helper. Signed-off-by:
Len Baker <len.baker@gmx.com> Signed-off-by:
-
Andy Shevchenko authored
Use %*ph format to print small buffer as hex string. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Angus Ainslie authored
Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by:
Angus Ainslie <angus@akkea.ca> Signed-off-by:
-
Sean Anderson authored
This puts tasks submitted to the SDIO workqueue at the head of the queue and runs them immediately. This gets higher RX throughput with the SDIO bus. This was originally submitted as [1]. The original author Wright Feng reports > throughput result with 43455(11ac) on 1 core 1.6 Ghz platform is > Without WQ_HIGGPRI TX/RX: 293/301 (mbps) > With WQ_HIGHPRI TX/RX: 293/321 (mbps) I tested this with a 43364(11bgn) on a 1 core 800 MHz platform and got Without WQ_HIGHPRI TX/RX: 16/19 (Mbits/sec) With WQ_HIGHPRI TX/RX: 24/20 (MBits/sec) [1] https://lore.kernel.org/linux-wireless/1584604406-15452-4-git-send-email-wright.feng@cypress.com/Signed-off-by:Sean Anderson <sean.anderson@seco.com> Reviewed-by:
Arend van Spriel <aspriel@gmail.com> Signed-off-by:
-
Mikhail Rudenko authored
A separate firmware is needed for Broadcom 43430 revision 2. This chip can be found in e.g. certain revisions of Ampak AP6212 wireless IC. Original firmware file from IC vendor is named 'fw_bcm43436b0.bin', but brcmfmac and also btbcm drivers report chip id 43430, so requested firmware file name is 'brcmfmac43430b0-sdio.bin' in line with other 43430 revisions. Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by:
-
Arend van Spriel authored
Historically the broadcom wifi chipsets always had enumeration space containing all core information at same place. However, for new chipsets the ASIC developers moved away from that given fact. So we have to accommodate that it can differ per chipset. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
-
Arend van Spriel authored
Newer firmware API require commands to use xtlv format. Add support for that in the firmware interface layer. Reviewed-by:
-
Arend van Spriel authored
Some cores are getting a revision greater that 99 thus messing up the column alignment in the list of cores. So adding a digit for the core revision. Reviewed-by:
-
Arend van Spriel authored
The function brcmf_chip_tcm_rambase() returns 0 as invalid ram base address. However, upcoming chips have ram base address starting at zero so we have to find a more appropriate invalid value to return. Reviewed-by:
-
Linus Walleij authored
The patch that would first try the board-specific firmware had a bug because the fallback would not be called: the asynchronous interface is used meaning request_firmware_nowait() returns 0 immediately. Harden the firmware loading like this: - If we cannot build an alt_path (like if no board_type is specified) just request the first firmware without any suffix, like in the past. - If the lookup of a board specific firmware fails, we get a NULL fw in the async callback, so just try again without the alt_path from a dedicated brcm_fw_request_done_alt_path callback. - Drop the unnecessary prototype of brcm_fw_request_done. - Added MODULE_FIRMWARE match for per-board SDIO bins, making userspace tools to pull all the relevant firmware files. Fixes: 5ff01391 ("brcmfmac: firmware: Allow per-board firmware binaries") Cc: Stefan Hansson <newbyte@disroot.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Reviewed-by:
-
- 06 Aug, 2021 1 commit
-
-
Lukas Bulwahn authored
Commit 1d89cae1 ("MAINTAINERS: mark prism54 obsolete") indicated the prism54 driver as obsolete in July 2010. Now, after being exposed for ten years to refactoring, general tree-wide changes and various janitor clean-up, it is really time to delete the driver for good. This was discovered as part of a checkpatch evaluation, investigating all reports of checkpatch's WARNING:OBSOLETE check. p54 replaces prism54 so users should be unaffected. There was a one off chipset someone long ago reported that p54 didn't work with but the reporter never followed up on that. Additionally, distributions have been blacklisting prism54 for years now. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
- 01 Aug, 2021 2 commits
-
-
dingsenjie authored
The label is only used once, so we delete it and use the return statement instead of the goto statement. Signed-off-by:
dingsenjie <dingsenjie@yulong.com> Signed-off-by:
-
Linus Walleij authored
After some crashes in the 3D engine (!) on the Samsung GT-I8530 it turns out that the main firmware file can be device dependent, something that was previously only handled for the NVRAM parameter file. Rewrite the code a bit so we can a per-board suffixed firmware binary as well, if this does not exist we fall back to the canonical firmware name. Example: a 4330 device with the OF board compatible is "samsung,gavini". We will first try "brcmfmac4330-sdio.samsung,gavini.bin" then "brcmfmac4330-sdio.bin" if that does not work. Cc: phone-devel@vger.kernel.org Cc: newbyte@disroot.org Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
- 28 Jul, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.15. Major changes: ath5k, ath9k, ath10k, ath11k: * switch from 'pci_' to 'dma_' API
-
- 26 Jul, 2021 12 commits
-
-
Jason Wang authored
The dma_pool_zalloc combines dma_pool_alloc/memset. Therefore, the dma_pool_alloc/memset can be replaced with dma_pool_zalloc which is more compact. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yinjun Zhang authored
Use dynamic interrupt moderation library to implement coalesce adaptive feature for nfp driver. Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
Yu Xiao <yu.xiao@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Richard Laing authored
Packets are aggregated over the MBIM link and currently the MHI net device will count each aggregated packet rather then the actual packets themselves. If a protocol handler module is specified, use that to count the packets rather than directly in the MHI net device. This is in line with the behaviour of the USB net cdc_mbim driver. Signed-off-by:
Richard Laing <richard.laing@alliedtelesis.co.nz> Signed-off-by:
-
wengjianfeng authored
Simplify the code by removing unnecessary label and returning directly. Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add support devlink This series adds devlink support for the HNS3 ethernet driver. change log: V2 -> V3: 1. remove two patches of setting rx/tx buffer size by devlink param. V1 -> V2: 1. add more detailed descriptions of parameters in document hns3.rst. RFC -> V1: 1. use DEVLINK_INFO_VERSION_GENERIC_FW instead of "fw-version". 2. add devlink documentation for hns3 driver. ==================== Signed-off-by: -
Hao Chen authored
Add devlink reload support for HNS3 ethernet VF driver. Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Hao Chen authored
Add devlink reload support for HNS3 ethernet PF driver. Signed-off-by:
-
Yufeng Mo authored
Add devlink get info support for HNS3 ethernet VF driver. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Yufeng Mo authored
Add devlink get info support for HNS3 ethernet PF driver. Signed-off-by:
-
Yufeng Mo authored
Add devlink register support for HNS3 ethernet VF driver. Signed-off-by:
-
Yufeng Mo authored
Add devlink register support for HNS3 ethernet PF driver. Signed-off-by:
-
Hao Chen authored
Add a file to document devlink support for hns3 driver, now support devlink info and devlink reload. Signed-off-by:
-
- 25 Jul, 2021 8 commits
-
-
Xin Long authored
syzbot reported an use-after-free crash: BUG: KASAN: use-after-free in tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979 Call Trace: tipc_recvmsg+0xf77/0xf90 net/tipc/socket.c:1979 sock_recvmsg_nosec net/socket.c:943 [inline] sock_recvmsg net/socket.c:961 [inline] sock_recvmsg+0xca/0x110 net/socket.c:957 tipc_conn_rcv_from_sock+0x162/0x2f0 net/tipc/topsrv.c:398 tipc_conn_recv_work+0xeb/0x190 net/tipc/topsrv.c:421 process_one_work+0x98d/0x1630 kernel/workqueue.c:2276 worker_thread+0x658/0x11f0 kernel/workqueue.c:2422 As Hoang pointed out, it was caused by skb_cb->bytes_read still accessed after calling tsk_advance_rx_queue() to free the skb in tipc_recvmsg(). This patch is to fix it by accessing skb_cb->bytes_read earlier than calling tsk_advance_rx_queue(). Fixes: f4919ff5 ("tipc: keep the skb in rcv queue until the whole data is read") Reported-by: syzbot+e6741b97d5552f97c24d@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
-
David S. Miller authored
Krzysztof Kozlowski says: ==================== nfc: constify data structures Constify pointers to several data structures which are not modified by NFC core or by drivers to make it slightly safer. No functional impact expected. ==================== Signed-off-by: -
Krzysztof Kozlowski authored
Neither the core nor the drivers modify the passed pointer to struct nfc_digital_ops, so make it a pointer to const for correctness and safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Neither the core nor the drivers modify the passed pointer to struct nfc_llc_ops, so make it a pointer to const for correctness and safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Neither the core nor the drivers modify the passed pointer to struct nfc_hci_ops, so make it a pointer to const for correctness and safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Neither the core nor the drivers modify the passed pointer to struct nfc_ops, so make it a pointer to const for correctness and safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Neither the core nor the drivers modify the passed pointer to struct nfc_hci_gate, so make it a pointer to const for correctness and safety. Signed-off-by:
-
Krzysztof Kozlowski authored
Neither the core nor the drivers modify the passed pointer to struct nfc_vendor_cmd, so make it a pointer to const for correctness and safety. Signed-off-by:
-
