- 15 Apr, 2023 1 commit
-
-
Jakub Kicinski authored
We maintain a NAPI-local cache of skbs which is fed by napi_consume_skb(). Going forward we will also try to cache head and data pages. Plumb the "are we in a normal NAPI context" information thru deeper into the freeing path, up to skb_release_data() and skb_free_head()/skb_pp_recycle(). The "not normal NAPI context" comes from netpoll which passes budget of 0 to try to reap the Tx completions but not perform any Rx. Use "bool napi_safe" rather than bare "int budget", the further we get from NAPI the more confusing the budget argument may seem (particularly whether 0 or MAX is the correct value to pass in when not in NAPI). Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Tested-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 14 Apr, 2023 36 commits
-
-
David S. Miller authored
Kevin Brodsky says: ==================== net: Finish up ->msg_control{,_user} split Commit 1f466e1f ("net: cleanly handle kernel vs user buffers for ->msg_control") introduced the msg_control_user and msg_control_is_user fields in struct msghdr, to ensure that user pointers are represented as such. It also took care of converting most users of struct msghdr::msg_control where user pointers are involved. It did however miss a number of cases, and some code using msg_control inappropriately has also appeared in the meantime. This series is attempting to complete the split, by eliminating the remaining cases where msg_control is used when in fact a user pointer is stored in the union (patch 1). It also addresses a couple of issues with msg_control_is_user: one where it is not updated as it should (patch 2), and one where it is not initialised (patch 3). v1..v2: * Split out the msg_control_is_user fixes into separate patches. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Kevin Brodsky authored
do_ipv6_setsockopt() makes use of struct msghdr::msg_control in the IPV6_2292PKTOPTIONS case. Make sure to initialise msg_control_is_user accordingly. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Kevin Brodsky <kevin.brodsky@arm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Kevin Brodsky authored
cmsghdr_from_user_compat_to_kern() is an unusual case w.r.t. how the kmsg->msg_control* fields are used. The input struct msghdr holds a pointer to a user buffer, i.e. ksmg->msg_control_user is active. However, upon success, a kernel pointer is stored in kmsg->msg_control. kmsg->msg_control_is_user should therefore be updated accordingly. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Kevin Brodsky authored
Since commit 1f466e1f ("net: cleanly handle kernel vs user buffers for ->msg_control"), pointers to user buffers should be stored in struct msghdr::msg_control_user, instead of the msg_control field. Most users of msg_control have already been converted (where user buffers are involved), but not all of them. This patch attempts to address the remaining cases. An exception is made for null checks, as it should be safe to use msg_control unconditionally for that purpose. Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Arseniy Krasnov authored
This replaces 'skb_queue_tail()' with 'virtio_vsock_skb_queue_tail()'. The first one uses 'spin_lock_irqsave()', second uses 'spin_lock_bh()'. There is no need to disable interrupts in the loopback transport as there is no access to the queue with skbs from interrupt context. Both virtio and vhost transports work in the same way. Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
David S. Miller authored
Haiyang Zhang says: ==================== net: mana: Add support for jumbo frame The set adds support for jumbo frame, with some optimization for the RX path. ==================== Signed-off-by: -
Haiyang Zhang authored
During probe, get the hardware-allowed max MTU by querying the device configuration. Users can select MTU up to the device limit. When XDP is in use, limit MTU settings so the buffer size is within one page. And, when MTU is set to a too large value, XDP is not allowed to run. Also, to prevent changing MTU fails, and leaves the NIC in a bad state, pre-allocate all buffers before starting the change. So in low memory condition, it will return error, without affecting the NIC. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Haiyang Zhang authored
Update RX data path to allocate and use RX queue DMA buffers with proper size based on potentially various MTU sizes. Signed-off-by:
-
Haiyang Zhang authored
Move out common buffer allocation code from mana_process_rx_cqe() and mana_alloc_rx_wqe() to helper functions. Refactor related variables so they can be changed in one place, and buffer sizes are in sync. Signed-off-by:
-
Haiyang Zhang authored
Use napi_build_skb() instead of build_skb() to take advantage of the NAPI percpu caches to obtain skbuff_head. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-04-11 1) Vlad adds the support for linux bridge multicast offload support Patches #1 through #9 Synopsis Vlad Says: ============== Implement support of bridge multicast offload in mlx5. Handle port object attribute SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED notification to toggle multicast offload and bridge snooping support on bridge. Handle port object SWITCHDEV_OBJ_ID_PORT_MDB notification to attach a bridge port to MDB. Steering architecture Existing offload infrastructure relies on two levels of flow tables - bridge ingress and egress. For multicast offload the architecture is extended with additional layer of per-port multicast replication tables. Such tables filter loopback traffic (so packets are not replicated to their source port) and pop VLAN headers for "untagged" VLANs. The tables are referenced by the MDB rules in egress table. MDB egress rule can point to multiple per-port multicast tables, which causes matching multicast traffic to be replicated to all of them, and, consecutively, to several bridge ports: +--------+--+ +---------------------------------------> Port 1 | | | +-^------+--+ | | | | +-----------------------------------------+ | +---------------------------+ | | EGRESS table | | +--> PORT 1 multicast table | | +----------------------------------+ +-----------------------------------------+ | | +---------------------------+ | | INGRESS table | | | | | | | | +----------------------------------+ | dst_mac=P1,vlan=X -> pop vlan, goto P1 +--+ | | FG0: | | | | | dst_mac=P1,vlan=Y -> pop vlan, goto P1 | | | src_port=dst_port -> drop | | | src_mac=M1,vlan=X -> goto egress +---> dst_mac=P2,vlan=X -> pop vlan, goto P2 +--+ | | FG1: | | | ... | | dst_mac=P2,vlan=Y -> goto P2 | | | | VLAN X -> pop, goto port | | | | | dst_mac=MDB1,vlan=Y -> goto mcast P1,P2 +-----+ | ... | | +----------------------------------+ | | | | | VLAN Y -> pop, goto port +-------+ +-----------------------------------------+ | | | FG3: | | | | matchall -> goto port | | | | | | | +---------------------------+ | | | | | | +--------+--+ +---------------------------------------> Port 2 | | | +-^------+--+ | | | | | +---------------------------+ | +--> PORT 2 multicast table | | +---------------------------+ | | | | | FG0: | | | src_port=dst_port -> drop | | | FG1: | | | VLAN X -> pop, goto port | | | ... | | | | | | FG3: | | | matchall -> goto port +-------+ | | +---------------------------+ Patches overview: - Patch 1 adds hardware definition bits for capabilities required to replicate multicast packets to multiple per-port tables. These bits are used by following patches to only attempt multicast offload if firmware and hardware provide necessary support. - Pathces 2-4 patches are preparations and refactoring. - Patch 5 implements necessary infrastructure to toggle multicast offload via SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED port object attribute notification. This also enabled IGMP and MLD snooping. - Patch 6 implements per-port multicast replication tables. It only supports filtering of loopback packets. - Patch 7 extends per-port multicast tables with VLAN pop support for 'untagged' VLANs. - Patch 8 handles SWITCHDEV_OBJ_ID_PORT_MDB port object notifications. It creates MDB replication rules in egress table that can replicate packets to multiple per-port multicast tables. - Patch 9 adds tracepoints for MDB events. ============== 2) Parav Create a new allocation profile for SFs, to save on memory 3) Yevgeny provides some initial patches for upcoming software steering support new pattern/arguments type of modify_header actions. Starting with ConnectX-6 DX, we use a new design of modify_header FW object. The current modify_header object allows for having only limited number of these FW objects, which means that we are limited in the number of offloaded flows that require modify_header action. As a preparation Yevgeny provides the following 4 patches: - Patch 1: Add required mlx5_ifc HW bits - Patch 2, 3: Add new WQE type and opcode that is required for pattern/arg support and adds appropriate support in dr_send.c - Patch 4: Add ICM pool for modify-header-pattern objects and implement patterns cache, allowing patterns reuse for different flows * tag 'mlx5-updates-2023-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: DR, Add modify-header-pattern ICM pool net/mlx5: DR, Prepare sending new WQE type net/mlx5: Add new WQE for updating flow table net/mlx5: Add mlx5_ifc bits for modify header argument net/mlx5: DR, Set counter ID on the last STE for STEv1 TX net/mlx5: Create a new profile for SFs net/mlx5: Bridge, add tracepoints for multicast net/mlx5: Bridge, implement mdb offload net/mlx5: Bridge, support multicast VLAN pop net/mlx5: Bridge, add per-port multicast replication tables net/mlx5: Bridge, snoop igmp/mld packets net/mlx5: Bridge, extract code to lookup parent bridge of port net/mlx5: Bridge, move additional data structures to priv header net/mlx5: Bridge, increase bridge tables sizes net/mlx5: Add mlx5_ifc definitions for bridge multicast support ==================== Link: https://lore.kernel.org/r/20230412040752.14220-1-saeed@kernel.orgSigned-off-by: -
Jakub Kicinski authored
Vladimir Oltean says: ==================== Add kernel tc-mqprio and tc-taprio support for preemptible traffic classes The last RFC in August 2022 contained a proposal for the UAPI of both TSN standards which together form Frame Preemption (802.1Q and 802.3): https://lore.kernel.org/netdev/20220816222920.1952936-1-vladimir.oltean@nxp.com/ It wasn't clear at the time whether the 802.1Q portion of Frame Preemption should be exposed via the tc qdisc (mqprio, taprio) or via some other layer (perhaps also ethtool like the 802.3 portion, or dcbnl), even though the options were discussed extensively, with pros and cons: https://lore.kernel.org/netdev/20220816222920.1952936-3-vladimir.oltean@nxp.com/ So the 802.3 portion got submitted separately and finally was accepted: https://lore.kernel.org/netdev/20230119122705.73054-1-vladimir.oltean@nxp.com/ leaving the only remaining question: how do we expose the 802.1Q bits? This series proposes that we use the Qdisc layer, through separate (albeit very similar) UAPI in mqprio and taprio, and that both these Qdiscs pass the information down to the offloading device driver through the common mqprio offload structure (which taprio also passes). An implementation is provided for the NXP LS1028A on-board Ethernet endpoint (enetc). Previous versions also contained support for its embedded switch (felix), but this needs more work and will be submitted separately. v4: https://lore.kernel.org/netdev/20230403103440.2895683-1-vladimir.oltean@nxp.com/ v2: https://lore.kernel.org/netdev/20230219135309.594188-1-vladimir.oltean@nxp.com/ v1: https://lore.kernel.org/netdev/20230216232126.3402975-1-vladimir.oltean@nxp.com/ ==================== Link: https://lore.kernel.org/r/20230411180157.1850527-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
PFs which support the MAC Merge layer also have a set of 8 registers called "Port traffic class N frame preemption register (PTC0FPR - PTC7FPR)". Through these, a traffic class (group of TX rings of same dequeue priority) can be mapped to the eMAC or to the pMAC. There's nothing particularly spectacular here. We should probably only commit the preemptible TCs to hardware once the MAC Merge layer became active, but unlike Felix, we don't have an IRQ that notifies us of that. We'd have to sleep for up to verifyTime (127 ms) to wait for a resolution coming from the verification state machine; not only from the ndo_setup_tc() code path, but also from enetc_mm_link_state_update(). Since it's relatively complicated and has a relatively small benefit, I'm not doing it. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ferenc Fejes <fejes@inf.elte.hu> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Vladimir Oltean authored
To gain access to the larger encapsulating structure which has the type tc_mqprio_qopt_offload, rename just the "qopt" field as "qopt". Signed-off-by:
-
Vladimir Oltean authored
This is a duplication of the FP adminStatus logic introduced for tc-mqprio. Offloading is done through the tc_mqprio_qopt_offload structure embedded within tc_taprio_qopt_offload. So practically, if a device driver is written to treat the mqprio portion of taprio just like standalone mqprio, it gets unified handling of frame preemption. I would have reused more code with taprio, but this is mostly netlink attribute parsing, which is hard to transform into generic code without having something that stinks as a result. We have the same variables with the same semantics, just different nlattr type values (TCA_MQPRIO_TC_ENTRY=5 vs TCA_TAPRIO_ATTR_TC_ENTRY=12; TCA_MQPRIO_TC_ENTRY_FP=2 vs TCA_TAPRIO_TC_ENTRY_FP=3, etc) and consequently, different policies for the nest. Every time nla_parse_nested() is called, an on-stack table "tb" of nlattr pointers is allocated statically, up to the maximum understood nlattr type. That array size is hardcoded as a constant, but when transforming this into a common parsing function, it would become either a VLA (which the Linux kernel rightfully doesn't like) or a call to the allocator. Having FP adminStatus in tc-taprio can be seen as addressing the 802.1Q Annex S.3 "Scheduling and preemption used in combination, no HOLD/RELEASE" and S.4 "Scheduling and preemption used in combination with HOLD/RELEASE" use cases. HOLD and RELEASE events are emitted towards the underlying MAC Merge layer when the schedule hits a Set-And-Hold-MAC or a Set-And-Release-MAC gate operation. So within the tc-taprio UAPI space, one can distinguish between the 2 use cases by choosing whether to use the TC_TAPRIO_CMD_SET_AND_HOLD and TC_TAPRIO_CMD_SET_AND_RELEASE gate operations within the schedule, or just TC_TAPRIO_CMD_SET_GATES. A small part of the change is dedicated to refactoring the max_sdu nlattr parsing to put all logic under the "if" that tests for presence of that nlattr. Signed-off-by:
-
Vladimir Oltean authored
IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each packet priority can be assigned to a "frame preemption status" value of either "express" or "preemptible". Express priorities are transmitted by the local device through the eMAC, and preemptible priorities through the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge layer). The FP adminStatus is defined per packet priority, but 802.1Q clause 12.30.1.1.1 framePreemptionAdminStatus also says that: | Priorities that all map to the same traffic class should be | constrained to use the same value of preemption status. It is impossible to ignore the cognitive dissonance in the standard here, because it practically means that the FP adminStatus only takes distinct values per traffic class, even though it is defined per priority. I can see no valid use case which is prevented by having the kernel take the FP adminStatus as input per traffic class (what we do here). In addition, this also enforces the above constraint by construction. User space network managers which wish to expose FP adminStatus per priority are free to do so; they must only observe the prio_tc_map of the netdev (which presumably is also under their control, when constructing the mqprio netlink attributes). The reason for configuring frame preemption as a property of the Qdisc layer is that the information about "preemptible TCs" is closest to the place which handles the num_tc and prio_tc_map of the netdev. If the UAPI would have been any other layer, it would be unclear what to do with the FP information when num_tc collapses to 0. A key assumption is that only mqprio/taprio change the num_tc and prio_tc_map of the netdev. Not sure if that's a great assumption to make. Having FP in tc-mqprio can be seen as an implementation of the use case defined in 802.1Q Annex S.2 "Preemption used in isolation". There will be a separate implementation of FP in tc-taprio, for the other use cases. Signed-off-by:
-
Vladimir Oltean authored
With the multiplexed ndo_setup_tc() model which lacks a first-class struct netlink_ext_ack * argument, the only way to pass the netlink extended ACK message down to the device driver is to embed it within the offload structure. Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload. Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload structure, and since device drivers might effectively reuse their mqprio implementation for the mqprio portion of taprio, we make taprio set the extack in both offload structures to point at the same netlink extack message. In fact, the taprio handling is a bit more tricky, for 2 reasons. First is because the offload structure has a longer lifetime than the extack structure. The driver is supposed to populate the extack synchronously from ndo_setup_tc() and leave it alone afterwards. To not have any use-after-free surprises, we zero out the extack pointer when we leave taprio_enable_offload(). The second reason is because taprio does overwrite the extack message on ndo_setup_tc() error. We need to switch to the weak form of setting an extack message, which preserves a potential message set by the driver. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Vladimir Oltean authored
Ferenc reports that a combination of poor iproute2 defaults and obscure cases where the kernel returns -EINVAL make it difficult to understand what is wrong with this command: $ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1 $ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 RTNETLINK answers: Invalid argument Hopefully with this patch, the cause is clearer: Error: Device does not support hardware offload. The kernel was (and still is) rejecting this because iproute2 defaults to "hw 1" if this command line option is not specified. Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/Signed-off-by: -
Vladimir Oltean authored
Netlink attribute parsing in mqprio is a minesweeper game, with many options having the possibility of being passed incorrectly and the user being none the wiser. Try to make errors less sour by giving user space some information regarding what went wrong. Signed-off-by:
-
Vladimir Oltean authored
In commit 4e8b86c0 ("mqprio: Introduce new hardware offload mode and shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt)) and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space) following immediately afterwards. In commit feb2cf3d ("net/sched: mqprio: refactor nlattr parsing to a separate function"), we've moved the nlattr handling to a smaller function, but yet, a small parse_attr() still remains, and the larger mqprio_parse_nlattr() still does not have access to the beginning, and the length, of the TCA_OPTIONS region containing these other nlattrs. In a future change, the mqprio qdisc will need to iterate through this nlattr region to discover other attributes, so eliminate parse_attr() and add 2 variables in mqprio_parse_nlattr() which hold the beginning and the length of the nlattr range. We avoid the need to memset when nlattr_opt_len has insufficient length by pre-initializing the table "tb". Signed-off-by:
-
Vladimir Oltean authored
Create a wrapper over __ethtool_dev_mm_supported() which also calls ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code layers, such as tc, to make sure that preemptible TCs are supported (this is true if an underlying MAC Merge layer exists). Signed-off-by:
-
Rahul Rameshbabu authored
Make it explicit that this tool is not a drop-in replacement for ethtool. This tool is intended for testing ethtool functionality implemented in the kernel and should use a name that differentiates it from the ethtool utility. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Link: https://lore.kernel.org/r/20230413012252.184434-2-rrameshbabu@nvidia.comSigned-off-by:
-
Rahul Rameshbabu authored
Absolute paths for the spec and schema files make the ethtool testing tool unusable with freshly checked-out source trees. Replace absolute paths with relative paths for both files in the Documentation/ directory. Issue seen before the change Traceback (most recent call last): File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 424, in <module> main() File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 158, in main ynl = YnlFamily(spec, schema) File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/ynl.py", line 342, in __init__ super().__init__(def_path, schema) File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/nlspec.py", line 333, in __init__ with open(spec_path, "r") as stream: FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/google/home/sdf/src/linux/Documentation/netlink/specs/ethtool.yaml' Fixes: f3d07b02 ("tools: ynl: ethtool testing tool") Signed-off-by: -
Jakub Kicinski authored
Harini Katakam says: ==================== Macb PTP minor updates - Enable PTP unicast - Optimize HW timestamp reading ==================== Link: https://lore.kernel.org/r/20230411123712.11459-1-harini.katakam@amd.comSigned-off-by:
-
Harini Katakam authored
The seconds input from BD (6 bits) just needs to be ORed with the upper bits from timer in this function. Avoid addition operation every single time. Seconds rollover handling is left untouched. Signed-off-by:
Harini Katakam <harini.katakam@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by:
-
Harini Katakam authored
Enable transmission and reception of PTP unicast packets by updating PTP unicast config bit and setting current HW mac address as allowed address in PTP unicast filter registers. Signed-off-by:
-
Harini Katakam authored
There are currently two checks for PTP functionality - one on GEM capability and another on the kernel config option. Combine them into a single function as there's no use case where gem_has_ptp is TRUE and MACB_USE_HWSTAMP is false. Signed-off-by:
Harini Katakam <harini.katakam@amd.com> Signed-off-by:
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Ocelot/Felix driver cleanup The cleanup mostly handles the statistics code path - some issues regarding understandability became apparent after the series "Fix trainwreck with Ocelot switch statistics counters": https://lore.kernel.org/netdev/20230321010325.897817-1-vladimir.oltean@nxp.com/ There is also one patch which cleans up a misleading comment in the DSA felix_setup(). ==================== Link: https://lore.kernel.org/r/20230412124737.2243527-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
Since it is hopefully now clear that, since "last" and "layout[i].reg" are enum types and not addresses, the existing WARN_ON() is ineffective in checking that the _addresses_ are sorted in the proper order. Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
-
Vladimir Oltean authored
The "int i" used to index the struct ocelot_stat_layout array actually has a specific type: enum ocelot_stat. Use it, so that the WARN() comment from ocelot_prepare_stats_regions() makes more sense. Signed-off-by:
-
Vladimir Oltean authored
Use the specific enum ocelot_reg to make it clear that the region registers are encoded and not plain addresses. Signed-off-by:
-
Vladimir Oltean authored
That comment was written prior to knowing that what I was actually seeing was a manifestation of the bug fixed in commit b4024c9e ("felix: Fix initialization of ioremap resources"). There isn't any particular reason now why the hardware initialization is done in felix_setup(), so just delete that comment to avoid spreading misinformation. Signed-off-by:
-
Vladimir Oltean authored
Commit a3bb8f52 ("net: mscc: ocelot: remove unnecessary exposure of stats structures") made an unnecessary change which was to add a new line at the end of ocelot_stats.c. Remove it. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
-
Vladimir Oltean authored
To make it easier to debug future issues with statistics counters not getting aggregated properly into regions, like what happened in commit 6acc72a4 ("net: mscc: ocelot: fix stats region batching"), add some dev_dbg() prints which show the regions that were dynamically determined. Signed-off-by:
-
Vladimir Oltean authored
ocelot_io.c duplicates the decoding of an enum ocelot_reg (which holds an enum ocelot_target in the upper bits and an index into a regmap array in the lower bits) 4 times. We'd like to reuse that logic once more, from ocelot.c. In order to do that, let's consolidate the existing 4 instances into a header accessible both by ocelot.c as well as by ocelot_io.c. Signed-off-by:
-
Vladimir Oltean authored
The "u32 reg" argument that is passed to these functions is not a plain address, but rather a driver-specific encoding of another enum ocelot_target target in the upper bits, and an index into the u32 ocelot->map[target][] array in the lower bits. That encoded value takes the type "enum ocelot_reg" and is what is passed to these I/O functions, so let's actually use that to prevent type confusion. Signed-off-by:
-
- 13 Apr, 2023 3 commits
-
-
Jakub Kicinski authored
==================== pull-request: bpf-next 2023-04-13 We've added 260 non-merge commits during the last 36 day(s) which contain a total of 356 files changed, 21786 insertions(+), 11275 deletions(-). The main changes are: 1) Rework BPF verifier log behavior and implement it as a rotating log by default with the option to retain old-style fixed log behavior, from Andrii Nakryiko. 2) Adds support for using {FOU,GUE} encap with an ipip device operating in collect_md mode and add a set of BPF kfuncs for controlling encap params, from Christian Ehrig. 3) Allow BPF programs to detect at load time whether a particular kfunc exists or not, and also add support for this in light skeleton, from Alexei Starovoitov. 4) Optimize hashmap lookups when key size is multiple of 4, from Anton Protopopov. 5) Enable RCU semantics for task BPF kptrs and allow referenced kptr tasks to be stored in BPF maps, from David Vernet. 6) Add support for stashing local BPF kptr into a map value via bpf_kptr_xchg(). This is useful e.g. for rbtree node creation for new cgroups, from Dave Marchevsky. 7) Fix BTF handling of is_int_ptr to skip modifiers to work around tracing issues where a program cannot be attached, from Feng Zhou. 8) Migrate a big portion of test_verifier unit tests over to test_progs -a verifier_* via inline asm to ease {read,debug}ability, from Eduard Zingerman. 9) Several updates to the instruction-set.rst documentation which is subject to future IETF standardization (https://lwn.net/Articles/926882/), from Dave Thaler. 10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register known bits information propagation, from Daniel Borkmann. 11) Add skb bitfield compaction work related to BPF with the overall goal to make more of the sk_buff bits optional, from Jakub Kicinski. 12) BPF selftest cleanups for build id extraction which stand on its own from the upcoming integration work of build id into struct file object, from Jiri Olsa. 13) Add fixes and optimizations for xsk descriptor validation and several selftest improvements for xsk sockets, from Kal Conley. 14) Add BPF links for struct_ops and enable switching implementations of BPF TCP cong-ctls under a given name by replacing backing struct_ops map, from Kui-Feng Lee. 15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable offset stack read as earlier Spectre checks cover this, from Luis Gerhorst. 16) Fix issues in copy_from_user_nofault() for BPF and other tracers to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner and Alexei Starovoitov. 17) Add --json-summary option to test_progs in order for CI tooling to ease parsing of test results, from Manu Bretelle. 18) Batch of improvements and refactoring to prep for upcoming bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator, from Martin KaFai Lau. 19) Improve bpftool's visual program dump which produces the control flow graph in a DOT format by adding C source inline annotations, from Quentin Monnet. 20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting the module name from BTF of the target and searching kallsyms of the correct module, from Viktor Malik. 21) Improve BPF verifier handling of '<const> <cond> <non_const>' to better detect whether in particular jmp32 branches are taken, from Yonghong Song. 22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock. A built-in cc or one from a kernel module is already able to write to app_limited, from Yixin Shen. Conflicts: Documentation/bpf/bpf_devel_QA.rst b7abcd9c ("bpf, doc: Link to submitting-patches.rst for general patch submission info") 0f10f647 ("bpf, docs: Use internal linking for link to netdev subsystem doc") https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/ include/net/ip_tunnels.h bc9d003d ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts") ac931d4c ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices") https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/ net/bpf/test_run.c e5995bc7 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption") 294635a8 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES") https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/ ==================== Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.netSigned-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Conflicts: tools/testing/selftests/net/config 62199e3f ("selftests: net: Add VXLAN MDB test") 3a0385be ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, and bluetooth. Not all that quiet given spring celebrations, but "current" fixes are thinning out, which is encouraging. One outstanding regression in the mlx5 driver when using old FW, not blocking but we're pushing for a fix. Current release - new code bugs: - eth: enetc: workaround for unresponsive pMAC after receiving express traffic Previous releases - regressions: - rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the pid/seq fields 0 for backward compatibility Previous releases - always broken: - sctp: fix a potential overflow in sctp_ifwdtsn_skip - mptcp: - use mptcp_schedule_work instead of open-coding it and make the worker check stricter, to avoid scheduling work on closed sockets - fix NULL pointer dereference on fastopen early fallback - skbuff: fix memory corruption due to a race between skb coalescing and releasing clones confusing page_pool reference counting - bonding: fix neighbor solicitation validation on backup slaves - bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp - bpf: arm64: fixed a BTI error on returning to patched function - openvswitch: fix race on port output leading to inf loop - sfp: initialize sfp->i2c_block_size at sfp allocation to avoid returning a different errno than expected - phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove - Bluetooth: fix printing errors if LE Connection times out - Bluetooth: assorted UaF, deadlock and data race fixes - eth: macb: fix memory corruption in extended buffer descriptor mode Misc: - adjust the XDP Rx flow hash API to also include the protocol layers over which the hash was computed" * tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits) selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type veth: bpf_xdp_metadata_rx_hash add xdp rss hash type mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type xdp: rss hash types representation selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters skbuff: Fix a race between coalescing and releasing SKBs net: macb: fix a memory corruption in extended buffer descriptor mode selftests: add the missing CONFIG_IP_SCTP in net config udp6: fix potential access to stale information selftests: openvswitch: adjust datapath NL message declaration selftests: mptcp: userspace pm: uniform verify events mptcp: fix NULL pointer dereference on fastopen early fallback mptcp: stricter state check in mptcp_worker mptcp: use mptcp_schedule_work instead of open-coding it net: enetc: workaround for unresponsive pMAC after receiving express traffic sctp: fix a potential overflow in sctp_ifwdtsn_skip net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume() rtnetlink: Restore RTM_NEW/DELLINK notification behavior net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes ...
-
