- 13 Jan, 2019 22 commits
-
-
Florian Westphal authored
[ Upstream commit 542fbda0 ] The dst entry might already have a zero refcount, waiting on rcu list to be free'd. Using dst_hold() transitions its reference count to 1, and next dst release will try to free it again -- resulting in a double free: WARNING: CPU: 1 PID: 0 at include/net/dst.h:239 nf_xfrm_me_harder+0xe7/0x130 [nf_nat] RIP: 0010:nf_xfrm_me_harder+0xe7/0x130 [nf_nat] Code: 48 8b 5c 24 60 65 48 33 1c 25 28 00 00 00 75 53 48 83 c4 68 5b 5d 41 5c c3 85 c0 74 0d 8d 48 01 f0 0f b1 0a 74 86 85 c0 75 f3 <0f> 0b e9 7b ff ff ff 29 c6 31 d2 b9 20 00 48 00 4c 89 e7 e8 31 27 Call Trace: nf_nat_ipv4_out+0x78/0x90 [nf_nat_ipv4] nf_hook_slow+0x36/0xd0 ip_output+0x9f/0xd0 ip_forward+0x328/0x440 ip_rcv+0x8a/0xb0 Use dst_hold_safe instead and bail out if we cannot take a reference. Fixes: a4c2fd7f ("net: remove DST_NOCACHE flag") Reported-by:
Martin Zaharinov <micron10@gmail.com> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pan Bian authored
[ Upstream commit 708abf74 ] In the error handling block, nla_nest_cancel(skb, atd) is called to cancel the nest operation. But then, ipset_nest_end(skb, atd) is unexpected called to end the nest operation. This patch calls the ipset_nest_end only on the branch that nla_nest_cancel is not called. Fixes: 45040978 ("netfilter: ipset: Fix set:list type crash when flush/dump set in parallel") Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Stefan Assmann authored
[ Upstream commit 158daed1 ] A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2 ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 254eb550 ] The LDT remap placement has been changed. It's now placed before the direct mapping in the kernel virtual address space for both paging modes. Change address markers order accordingly. Fixes: d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: jgross@suse.com Cc: bhe@redhat.com Cc: hans.van.kranenburg@mendix.com Cc: linux-mm@kvack.org Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20181130202328.65359-3-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
[ Upstream commit 16877a55 ] There is a guard hole at the beginning of the kernel address space, also used by hypervisors. It occupies 16 PGD entries. This reserved range is not defined explicitely, it is calculated relative to other entities: direct mapping and user space ranges. The calculation got broken by recent changes of the kernel memory layout: LDT remap range is now mapped before direct mapping and makes the calculation invalid. The breakage leads to crash on Xen dom0 boot[1]. Define the reserved range explicitely. It's part of kernel ABI (hypervisors expect it to be stable) and must not depend on changes in the rest of kernel memory layout. [1] https://lists.xenproject.org/archives/html/xen-devel/2018-11/msg03313.html Fixes: d52888aa ("x86/mm: Move LDT remap out of KASLR region on 5-level paging") Reported-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: dave.hansen@linux.intel.com Cc: luto@kernel.org Cc: peterz@infradead.org Cc: boris.ostrovsky@oracle.com Cc: bhe@redhat.com Cc: linux-mm@kvack.org Cc: xen-devel@lists.xenproject.org Link: https://lkml.kernel.org/r/20181130202328.65359-2-kirill.shutemov@linux.intel.comSigned-off-by:
-
YueHaibing authored
[ Upstream commit 8e41cae6 ] gcc warning this: drivers/net/ieee802154/ca8210.c:730:10: warning: comparison is always false due to limited range of data type [-Wtype-limits] 'len' is u8 type, we get it from buf[1] adding 2, which can overflow. This patch change the type of 'len' to unsigned int to avoid this,also fix the gcc warning. Fixes: ded845a7 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 1d1bbc37 ] ibmvnic_reset allocated new reset work item objects in a non-atomic context. This can be called from a tasklet, generating the output below. Allocate work items with the GFP_ATOMIC flag instead. BUG: sleeping function called from invalid context at mm/slab.h:421 in_atomic(): 1, irqs_disabled(): 1, pid: 93, name: kworker/0:2 INFO: lockdep is turned off. irq event stamp: 66049 hardirqs last enabled at (66048): [<c000000000122468>] tasklet_action_common.isra.12+0x78/0x1c0 hardirqs last disabled at (66049): [<c000000000befce8>] _raw_spin_lock_irqsave+0x48/0xf0 softirqs last enabled at (66044): [<c000000000a8ac78>] dev_deactivate_queue.constprop.28+0xc8/0x160 softirqs last disabled at (66045): [<c0000000000306e0>] call_do_softirq+0x14/0x24 CPU: 0 PID: 93 Comm: kworker/0:2 Kdump: loaded Not tainted 4.20.0-rc6-00001-g1b50a8f03706 #7 Workqueue: events linkwatch_event Call Trace: [c0000003fffe7ae0] [c000000000bc83e4] dump_stack+0xe8/0x164 (unreliable) [c0000003fffe7b30] [c00000000015ba0c] ___might_sleep+0x2dc/0x320 [c0000003fffe7bb0] [c000000000391514] kmem_cache_alloc_trace+0x3e4/0x440 [c0000003fffe7c30] [d000000005b2309c] ibmvnic_reset+0x16c/0x360 [ibmvnic] [c0000003fffe7cc0] [d000000005b29834] ibmvnic_tasklet+0x1054/0x2010 [ibmvnic] [c0000003fffe7e00] [c0000000001224c8] tasklet_action_common.isra.12+0xd8/0x1c0 [c0000003fffe7e60] [c000000000bf1238] __do_softirq+0x1a8/0x64c [c0000003fffe7f90] [c0000000000306e0] call_do_softirq+0x14/0x24 [c0000003f3967980] [c00000000001ba50] do_softirq_own_stack+0x60/0xb0 [c0000003f39679c0] [c0000000001218a8] do_softirq+0xa8/0x100 [c0000003f39679f0] [c000000000121a74] __local_bh_enable_ip+0x174/0x180 [c0000003f3967a60] [c000000000bf003c] _raw_spin_unlock_bh+0x5c/0x80 [c0000003f3967a90] [c000000000a8ac78] dev_deactivate_queue.constprop.28+0xc8/0x160 [c0000003f3967ad0] [c000000000a8c8b0] dev_deactivate_many+0xd0/0x520 [c0000003f3967b70] [c000000000a8cd40] dev_deactivate+0x40/0x60 [c0000003f3967ba0] [c000000000a5e0c4] linkwatch_do_dev+0x74/0xd0 [c0000003f3967bd0] [c000000000a5e694] __linkwatch_run_queue+0x1a4/0x1f0 [c0000003f3967c30] [c000000000a5e728] linkwatch_event+0x48/0x60 [c0000003f3967c50] [c0000000001444e8] process_one_work+0x238/0x710 [c0000003f3967d20] [c000000000144a48] worker_thread+0x88/0x4e0 [c0000003f3967db0] [c00000000014e3a8] kthread+0x178/0x1c0 [c0000003f3967e20] [c00000000000bfd0] ret_from_kernel_thread+0x5c/0x6c Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yussuf Khalil authored
[ Upstream commit ca504728 ] Before commit 7fd6d98b ("i2c: i801: Allow ACPI AML access I/O ports not reserved for SMBus"), enabling RMI on the T560 would cause the touchpad to stop working after resuming from suspend. Now that this issue is fixed, RMI can be enabled safely and works fine. Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Yussuf Khalil <dev@pp3345.net> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit e2ca26ec ] With PM enabled, I noticed that pressing a key on the droid4 keyboard will block deeper idle states for the SoC. Let's fix this by using IRQF_ONESHOT and stop constantly toggling the device OMAP4_KBD_IRQENABLE register as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. From the hardware point of view, looks like we need to manage the registers for OMAP4_KBD_IRQENABLE and OMAP4_KBD_WAKEUPENABLE together to avoid blocking deeper SoC idle states. And with toggling of OMAP4_KBD_IRQENABLE register now gone with IRQF_ONESHOT, also the SoC idle state problem is gone during runtime. We still also need to clear OMAP4_KBD_WAKEUPENABLE in omap4_keypad_close() though to pair it with omap4_keypad_open() to prevent blocking deeper SoC idle states after rmmod omap4-keypad. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9ae4f842 ] If "interface" is NULL then we can't release it and trying to will only lead to an Oops. Fixes: aea71a02 ("[SCSI] bnx2fc: Introduce interface structure for each vlan interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 530aad77 ] When adjusting sack block sequence numbers, skb_make_writable() gets called to make sure tcp options are all in the linear area, and buffer is not shared. This can cause tcp header pointer to get reallocated, so we must reaload it to avoid memory corruption. This bug pre-dates git history. Reported-by:
Neel Mehta <nmehta@google.com> Reported-by:
Shane Huntley <shuntley@google.com> Reported-by:
Heather Adkins <argv@google.com> Signed-off-by:
-
Steffen Klassert authored
[ Upstream commit 0152eee6 ] Since commit 222d7dbd ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code doesn't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in case the dst_entry was cleared. We also move the skb_dst_force() to a codepath that is not used when the transformation was offloaded, because in this case we don't have a dst_entry attached to the skb. The output and forwarding path was already fixed by commit 9e143793 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Fixes: 222d7dbd ("net: prevent dst uses after free") Reported-by:
Jean-Philippe Menil <jpmenil@gmail.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit ca92e173 ] sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909b ("[XFRM]: Export SAD info.") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 533555e5 ] xfrm_output_one() does not return a error code when there is no dst_entry attached to the skb, it is still possible crash with a NULL pointer dereference in xfrm_output_resume(). Fix it by return error code -EHOSTUNREACH. Fixes: 9e143793 ("xfrm: Fix NULL pointer dereference when skb_dst_force clears the dst_entry.") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit f1733a1d ] There is actually a space after "sp," like this, ffff2000080813c8: a9bb7bfd stp x29, x30, [sp, #-80]! Right now, checkstack.pl isn't able to print anything on aarch64, because it won't be able to match the stating objdump line of a function due to this missing space. Hence, it displays every stack as zero-size. After this patch, checkpatch.pl is able to match the start of a function's objdump, and is then able to calculate each function's stack correctly. Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pwSigned-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Peter Hutterer authored
[ Upstream commit c201e380 ] ABS_RESERVED was added in d9ca1c99 and accidentally removed as part of ffe0e7cf when the high-resolution scrolling code was removed. Signed-off-by:
Peter Hutterer <peter.hutterer@who-t.net> Reviewed-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by:
-
Fabio Estevam authored
[ Upstream commit f15096f1 ] According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 56354959 ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Anson Huang authored
[ Upstream commit 1e434b70 ] The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f08 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
-
Hans de Goede authored
[ Upstream commit 40502074 ] The 258a:6a88 keyboard-dock shipped with the Prowise PT301 tablet is likely another ITE based design. The controller die is directly bonded to the PCB with a blob of black glue on top so there are no markings and the 258a vendor-id used is unknown anywhere. But the keyboard has the exact same hotkeys mapped to Fn+F1 - F10 as the other ITE8595 keyboard I have *and* it has the same quirky behavior wrt the rfkill hotkey. Either way as said this keyboard has the same quirk for its rfkill / airplane mode hotkey as the ITE 8595 chip, it only sends a single release event when pressed and released, it never sends a press event. This commit adds the 258a:6a88 USB id to the hid-ite id-table, fixing the rfkill key not working on this keyboard. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 462951cd ] For some configs the build fails with: arch/powerpc/mm/dump_linuxpagetables.c: In function 'populate_markers': arch/powerpc/mm/dump_linuxpagetables.c:306:39: error: 'PKMAP_BASE' undeclared (first use in this function) arch/powerpc/mm/dump_linuxpagetables.c:314:50: error: 'LAST_PKMAP' undeclared (first use in this function) These come from highmem.h, including that fixes the build. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
[ Upstream commit 5564597d ] Commit 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN", 2011-04-12) changed the procedure descriptor at the start of crt0.S to have a hard-coded start address of 0x500000 rather than a reference to _zimage_start, presumably because having a reference to a symbol introduced a relocation which is awkward to handle in a position-independent executable. Unfortunately, what is at 0x500000 in the COFF image is not the first instruction, but the procedure descriptor itself, that is, a word containing 0x500000, which is not a valid instruction. Hence, booting a COFF zImage results in a "DEFAULT CATCH!, code=FFF00700" message from Open Firmware. This fixes the problem by (a) putting the procedure descriptor in the data section and (b) adding a branch to _zimage_start as the first instruction in the program. Fixes: 6975a783 ("powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYN") Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Jerome Brunet authored
[ Upstream commit 614b1868 ] We just changed the code so we apply bias disable on the correct register but forgot to align the register calculation. The result is that we apply the change on the correct register, but possibly at the incorrect offset/bit This went undetected because offsets tends to be the same between REG_PULL and REG_PULLEN for a given pin the EE controller. This is not true for the AO controller. Fixes: e39f9dd8 ("pinctrl: meson: fix pinconf bias disable") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 09 Jan, 2019 18 commits
-
-
Greg Kroah-Hartman authored
-
Paul Burton authored
commit 66a4059b upstream. MIPS' asm/mmzone.h includes the machine/platform mmzone.h unconditionally, but since commit bb53fdf3 ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3") is included by asm/rk4cache.h for all r4k-style configs regardless of CONFIG_NEED_MULTIPLE_NODES. This is problematic when CONFIG_NEED_MULTIPLE_NODES=n because both the loongson3 & ip27 mmzone.h headers unconditionally define the NODE_DATA preprocessor macro which is aready defined by linux/mmzone.h, resulting in the following build error: In file included from ./arch/mips/include/asm/mmzone.h:10, from ./arch/mips/include/asm/r4kcache.h:23, from arch/mips/mm/c-r4k.c:33: ./arch/mips/include/asm/mach-loongson64/mmzone.h:48: error: "NODE_DATA" redefined [-Werror] #define NODE_DATA(n) (&__node_data[(n)]->pglist) In file included from ./include/linux/topology.h:32, from ./include/linux/irq.h:19, from ./include/asm-generic/hardirq.h:13, from ./arch/mips/include/asm/hardirq.h:16, from ./include/linux/hardirq.h:9, from arch/mips/mm/c-r4k.c:11: ./include/linux/mmzone.h:907: note: this is the location of the previous definition #define NODE_DATA(nid) (&contig_page_data) Resolve this by only including the machine mmzone.h when CONFIG_NEED_MULTIPLE_NODES=y, which also removes the need for the empty mach-generic version of the header which we delete. Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: bb53fdf3 ("MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3") Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Wunner authored
commit 29bdedfd upstream. Commit e82b0b38 ("spi: bcm2835: Fix race on DMA termination") broke the build with COMPILE_TEST=y on arches whose cmpxchg() requires 32-bit operands (xtensa, older arm ISAs). Fix by changing the dma_pending flag's type from bool to unsigned int. Fixes: e82b0b38 ("spi: bcm2835: Fix race on DMA termination") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Martin Sperl <kernel@martin.sperl.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Tomas Winkler authored
commit 2ba5780c upstream. tpm_i2c_nuvoton calculated commands duration using TPM 1.x values via tpm_calc_ordinal_duration() also for TPM 2.x chips. Call tpm2_calc_ordinal_duration() for retrieving ordinal duration for TPM 2.X chips. Cc: stable@vger.kernel.org Cc: Nayna Jain <nayna@linux.vnet.ibm.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Nayna Jain <nayna@linux.ibm.com> Tested-by: Nayna Jain <nayna@linux.ibm.com> (For TPM 2.0) Reviewed-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Tomas Winkler authored
commit 01f54664 upstream. First, rename out_no_locality to out_locality for bailing out on both tpm_cmd_ready() and tpm_request_locality() failure. Second, ignore the return value of go_to_idle() as it may override the return value of the actual tpm operation, the go_to_idle() error will be caught on any consequent command. Last, fix the wrong 'goto out', that jumped back instead of forward. Cc: stable@vger.kernel.org Fixes: 627448e8 ("tpm: separate cmd_ready/go_idle from runtime_pm") Signed-off-by:
-
Maciej W. Rozycki authored
commit 3cc9ffbb upstream. Add the missing adjustment of the month range on alarm reads from the RTC, correcting an issue coming from commit 9c6dfed9 ("rtc: m41t80: add alarm functionality"). The range is 1-12 for hardware and 0-11 for `struct rtc_time', and is already correctly handled on alarm writes to the RTC. It was correct up until commit 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") too, which removed the previous implementation of alarm support. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Fixes: 9c6dfed9 ("rtc: m41t80: add alarm functionality") References: 48e97667 ("drivers/rtc/rtc-m41t80.c: remove disabled alarm functionality") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marc Zyngier authored
commit 107352a2 upstream. We currently only halt the guest when a vCPU messes with the active state of an SPI. This is perfectly fine for GICv2, but isn't enough for GICv3, where all vCPUs can access the state of any other vCPU. Let's broaden the condition to include any GICv3 interrupt that has an active state (i.e. all but LPIs). Cc: stable@vger.kernel.org Reviewed-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Will Deacon authored
commit df655b75 upstream. Although bit 31 of VTCR_EL2 is RES1, we inadvertently end up setting all of the upper 32 bits to 1 as well because we define VTCR_EL2_RES1 as signed, which is sign-extended when assigning to kvm->arch.vtcr. Lucky for us, the architecture currently treats these upper bits as RES0 so, whilst we've been naughty, we haven't set fire to anything yet. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Georgy A Bystrenin authored
commit 9a596f5b upstream. While resolving a bug with locks on samba shares found a strange behavior. When a file locked by one node and we trying to lock it from another node it fail with errno 5 (EIO) but in that case errno must be set to (EACCES | EAGAIN). This isn't happening when we try to lock file second time on same node. In this case it returns EACCES as expected. Also this issue not reproduces when we use SMB1 protocol (vers=1.0 in mount options). Further investigation showed that the mapping from status_to_posix_error is different for SMB1 and SMB2+ implementations. For SMB1 mapping is [NT_STATUS_LOCK_NOT_GRANTED to ERRlock] (See fs/cifs/netmisc.c line 66) but for SMB2+ mapping is [STATUS_LOCK_NOT_GRANTED to -EIO] (see fs/cifs/smb2maperror.c line 383) Quick changes in SMB2+ mapping from EIO to EACCES has fixed issue. BUG: https://bugzilla.kernel.org/show_bug.cgi?id=201971Signed-off-by:
Georgy A Bystrenin <gkot@altlinux.org> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Aaro Koskinen authored
commit edefae94 upstream. Commit 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") added RGMII interface detection for OCTEON III, but it results in the following logs: [ 7.165984] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe [ 7.173017] ERROR: Unsupported Octeon model in __cvmx_helper_rgmii_probe The current RGMII routines are valid only for older OCTEONS that use GMX/ASX hardware blocks. On later chips AGL should be used, but support for that is missing in the mainline. Until that is added, mark the interface as disabled. Fixes: 885872b7 ("MIPS: Octeon: Add Octeon III CN7xxx interface detection") Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Paul Burton authored
commit ff4dd232 upstream. ASIDs have always been stored as unsigned longs, ie. 32 bits on MIPS32 kernels. This is problematic because it is feasible for the ASID version to overflow & wrap around to zero. We currently attempt to handle this overflow by simply setting the ASID version to 1, using asid_first_version(), but we make no attempt to account for the fact that there may be mm_structs with stale ASIDs that have versions which we now reuse due to the overflow & wrap around. Encountering this requires that: 1) A struct mm_struct X is active on CPU A using ASID (V,n). 2) That mm is not used on CPU A for the length of time that it takes for CPU A's asid_cache to overflow & wrap around to the same version V that the mm had in step 1. During this time tasks using the mm could either be sleeping or only scheduled on other CPUs. 3) Some other mm Y becomes active on CPU A and is allocated the same ASID (V,n). 4) mm X now becomes active on CPU A again, and now incorrectly has the same ASID as mm Y. Where struct mm_struct ASIDs are represented above in the format (version, EntryHi.ASID), and on a typical MIPS32 system version will be 24 bits wide & EntryHi.ASID will be 8 bits wide. The length of time required in step 2 is highly dependent upon the CPU & workload, but for a hypothetical 2GHz CPU running a workload which generates a new ASID every 10000 cycles this period is around 248 days. Due to this long period of time & the fact that tasks need to be scheduled in just the right (or wrong, depending upon your inclination) way, this is obviously a difficult bug to encounter but it's entirely possible as evidenced by reports. In order to fix this, simply extend ASIDs to 64 bits even on MIPS32 builds. This will extend the period of time required for the hypothetical system above to encounter the problem from 28 days to around 3 trillion years, which feels safely outside of the realms of possibility. The cost of this is slightly more generated code in some commonly executed paths, but this is pretty minimal: | Code Size Gain | Percentage -----------------------|----------------|------------- decstation_defconfig | +270 | +0.00% 32r2el_defconfig | +652 | +0.01% 32r6el_defconfig | +1000 | +0.01% I have been unable to measure any change in performance of the LMbench lat_ctx or lat_proc tests resulting from the 64b ASIDs on either 32r2el_defconfig+interAptiv or 32r6el_defconfig+I6500 systems. Signed-off-by:
James Hogan <jhogan@kernel.org> References: https://lore.kernel.org/linux-mips/80B78A8B8FEE6145A87579E8435D78C30205D5F3@fzex.ruijie.com.cn/ References: https://lore.kernel.org/linux-mips/1488684260-18867-1-git-send-email-jiwei.sun@windriver.com/ Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: Yu Huabing <yhb@ruijie.com.cn> Cc: stable@vger.kernel.org # 2.6.12+ Cc: linux-mips@vger.kernel.org Signed-off-by:
-
Huacai Chen authored
commit bec0de4c upstream. KEXEC needs the new kernel's load address to be aligned on a page boundary (see sanity_check_segment_list()), but on MIPS the default vmlinuz load address is only explicitly aligned to 16 bytes. Since the largest PAGE_SIZE supported by MIPS kernels is 64KB, increase the alignment calculated by calc_vmlinuz_load_addr to 64KB. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Huacai Chen authored
commit 92aa0718 upstream. This patch is borrowed from ARM64 to ensure pmd_present() returns false after pmd_mknotpresent(). This is needed for THP. References: 5bb1cc0f ("arm64: Ensure pmd_present() returns false after pmd_mknotpresent()") Reviewed-by:
-
Huacai Chen authored
commit bb53fdf3 upstream. For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can only flush Node-0's scache. So we add r4k_blast_scache_node() by using (CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the start address. Signed-off-by:
-
Paul Burton authored
commit adcc81f1 upstream. Mapping the delay slot emulation page as both writeable & executable presents a security risk, in that if an exploit can write to & jump into the page then it can be used as an easy way to execute arbitrary code. Prevent this by mapping the page read-only for userland, and using access_process_vm() with the FOLL_FORCE flag to write to it from mips_dsemul(). This will likely be less efficient due to copy_to_user_page() performing cache maintenance on a whole page, rather than a single line as in the previous use of flush_cache_sigtramp(). However this delay slot emulation code ought not to be running in any performance critical paths anyway so this isn't really a problem, and we can probably do better in copy_to_user_page() anyway in future. A major advantage of this approach is that the fix is small & simple to backport to stable kernels. Reported-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit e5f71a27 upstream. text[s] is a signed char, so using that as index into the font8x16 array can result in negative indices. Cast it to u8 to be safe. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+ccf0a61ed12f2a7313ee@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> # for v4.7 and up Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit 560ccb75 upstream. When vivid_update_format_cap() is called it should free any overlay bitmap since the compose size will change. Signed-off-by:
-
Nava kishore Manne authored
commit 26068313 upstream. This patch Correct the RX interrupt mask value to handle the RX interrupts properly. Fixes: c8dbdc84 ("serial: xuartps: Rewrite the interrupt handling logic") Signed-off-by:
Nava kishore Manne <nava.manne@xilinx.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
