- 20 Apr, 2019 40 commits
-
-
Daniel Borkmann authored
commit 9b73bfdd upstream. Right now we are using BPF ax register in JIT for constant blinding as well as in interpreter as temporary variable. Verifier will not be able to use it simply because its use will get overridden from the former in bpf_jit_blind_insn(). However, it can be made to work in that blinding will be skipped if there is prior use in either source or destination register on the instruction. Taking constraints of ax into account, the verifier is then open to use it in rewrites under some constraints. Note, ax register already has mappings in every eBPF JIT. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Balbir Singh <sblbir@amzn.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Daniel Borkmann authored
commit 144cd91c upstream. This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run() into the hidden ax register. The latter is currently only used in JITs for constant blinding as a temporary scratch register, meaning the BPF interpreter will never see the use of ax. Therefore it is safe to use it for the cases where tmp has been used earlier. This is needed to later on allow restricted hidden use of ax in both interpreter and JITs. Signed-off-by:
-
Daniel Borkmann authored
commit c08435ec upstream. Move prev_insn_idx and insn_idx from the do_check() function into the verifier environment, so they can be read inside the various helper functions for handling the instructions. It's easier to put this into the environment rather than changing all call-sites only to pass it along. insn_idx is useful in particular since this later on allows to hold state in env->insn_aux_data[env->insn_idx]. Signed-off-by:
Vallish Vaidyeshwara <vallish@amazon.com> [Backported to 4.14 by sblbir] Signed-off-by:
-
Alexei Starovoitov authored
commit 12a3cc84 upstream. fix incorrect stack state prints in print_verifier_state() Fixes: 638f5b90 ("bpf: reduce verifier memory consumption") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
-
Craig Gallek authored
commit 8c01c4f8 upstream. do_check() can fail early without allocating env->cur_state under memory pressure. Syzkaller found the stack below on the linux-next tree because of this. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801c2c74700 task.stack: ffff8801c3e28000 RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline] RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380 RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28 R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20 FS: 00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166 SYSC_bpf kernel/bpf/syscall.c:1690 [inline] SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x452869 RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869 RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005 RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550 R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000 Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26 RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8 RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8 ---[ end trace c8d37f339dc64004 ]--- Fixes: 638f5b90 ("bpf: reduce verifier memory consumption") Fixes: 1969db47 ("bpf: fix verifier memory leaks") Signed-off-by:
Craig Gallek <kraig@google.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alexei Starovoitov authored
commit 1969db47 upstream. fix verifier memory leaks Fixes: 638f5b90 ("bpf: reduce verifier memory consumption") Signed-off-by:
Alexei Starovoitov <ast@fb.com> Signed-off-by:
-
Alexei Starovoitov authored
commit 638f5b90 upstream. the verifier got progressively smarter over time and size of its internal state grew as well. Time to reduce the memory consumption. Before: sizeof(struct bpf_verifier_state) = 6520 After: sizeof(struct bpf_verifier_state) = 896 It's done by observing that majority of BPF programs use little to no stack whereas verifier kept all of 512 stack slots ready always. Instead dynamically reallocate struct verifier state when stack access is detected. Runtime difference before vs after is within a noise. The number of processed instructions stays the same. Cc: jakub.kicinski@netronome.com Signed-off-by:
-
Mikulas Patocka authored
[ Upstream commit 432061b3 ] There's a XFS on dm-crypt deadlock, recursing back to itself due to the crypto subsystems use of GFP_KERNEL, reported here: https://bugzilla.kernel.org/show_bug.cgi?id=200835 * dm-crypt calls crypt_convert in xts mode * init_crypt from xts.c calls kmalloc(GFP_KERNEL) * kmalloc(GFP_KERNEL) recurses into the XFS filesystem, the filesystem tries to submit some bios and wait for them, causing a deadlock Fix this by updating both the DM crypt and integrity targets to no longer use the CRYPTO_TFM_REQ_MAY_SLEEP flag, which will change the crypto allocations from GFP_KERNEL to GFP_ATOMIC, therefore they can't recurse into a filesystem. A GFP_ATOMIC allocation can fail, but init_crypt() in xts.c handles the allocation failure gracefully - it will fall back to preallocated buffer if the allocation fails. The crypto API maintainer says that the crypto API only needs to allocate memory when dealing with unaligned buffers and therefore turning CRYPTO_TFM_REQ_MAY_SLEEP off is safe (see this discussion: https://www.redhat.com/archives/dm-devel/2018-August/msg00195.html ) Cc: stable@vger.kernel.org Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org>
-
Daniel Borkmann authored
[ Upstream commit 1da6c4d9 ] syzkaller was able to generate the following UAF in bpf: BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline] BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423 CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+ #110 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 lookup_last fs/namei.c:2269 [inline] path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318 filename_lookup+0x26a/0x520 fs/namei.c:2348 user_path_at_empty+0x40/0x50 fs/namei.c:2608 user_path include/linux/namei.h:62 [inline] do_mount+0x180/0x1ff0 fs/namespace.c:2980 ksys_mount+0x12d/0x140 fs/namespace.c:3258 __do_sys_mount fs/namespace.c:3272 [inline] __se_sys_mount fs/namespace.c:3269 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3269 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457569 Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569 RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000 RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000 R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4 R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff Allocated by task 9424: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 __do_kmalloc mm/slab.c:3722 [inline] __kmalloc_track_caller+0x157/0x760 mm/slab.c:3737 kstrdup+0x39/0x70 mm/util.c:49 bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356 vfs_symlink+0x37a/0x5d0 fs/namei.c:4127 do_symlinkat+0x242/0x2d0 fs/namei.c:4154 __do_sys_symlink fs/namei.c:4173 [inline] __se_sys_symlink fs/namei.c:4171 [inline] __x64_sys_symlink+0x59/0x80 fs/namei.c:4171 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9425: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xcf/0x230 mm/slab.c:3817 bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565 evict+0x4b9/0x980 fs/inode.c:558 iput_final fs/inode.c:1550 [inline] iput+0x674/0xa90 fs/inode.c:1576 do_unlinkat+0x733/0xa30 fs/namei.c:4069 __do_sys_unlink fs/namei.c:4110 [inline] __se_sys_unlink fs/namei.c:4108 [inline] __x64_sys_unlink+0x42/0x50 fs/namei.c:4108 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe In this scenario path lookup under RCU is racing with the final unlink in case of symlinks. As Linus puts it in his analysis: [...] We actually RCU-delay the inode freeing itself, but when we do the final iput(), the "evict()" function is called synchronously. Now, the simple fix would seem to just RCU-delay the kfree() of the symlink data in bpf_evict_inode(). Maybe that's the right thing to do. [...] Al suggested to piggy-back on the ->destroy_inode() callback in order to implement RCU deferral there which can then kfree() the inode->i_link eventually right before putting inode back into inode cache. By reusing free_inode_nonrcu() from there we can avoid the need for our own inode cache and just reuse generic one as we currently do. And in-fact on top of all this we should just get rid of the bpf_evict_inode() entirely. This means truncate_inode_pages_final() and clear_inode() will then simply be called by the fs core via evict(). Dropping the reference should really only be done when inode is unhashed and nothing reachable anymore, so it's better also moved into the final ->destroy_inode() callback. Fixes: 0f98621b ("bpf, inode: add support for symlinks and fix mtime/ctime") Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com Suggested-by:
Al Viro <viro@zeniv.linux.org.uk> Analyzed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Pi-Hsun Shih authored
[ Upstream commit a4046c06 ] Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18 Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.orgSigned-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Stanislaw Gruszka authored
[ Upstream commit cdc94a37 ] fls counts bits starting from 1 to 32 (returns 0 for zero argument). If we add 1 we shift right one bit more and loose precision from divisor, what cause function incorect results with some numbers. Corrected code was tested in user-space, see bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202391 Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com Fixes: 658716d1 ("div64_u64(): improve precision on 32bit platforms") Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reported-by:
Siarhei Volkau <lis8215@gmail.com> Tested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 6377f787 ] KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Kevin Wang authored
[ Upstream commit cac734c2 ] if use the legacy method to allocate object, when mqd_hiq need to run uninit code, it will be cause WARNING call trace. eg: (s3 suspend test) [ 34.918944] Call Trace: [ 34.918948] [<ffffffff92961dc1>] dump_stack+0x19/0x1b [ 34.918950] [<ffffffff92297648>] __warn+0xd8/0x100 [ 34.918951] [<ffffffff9229778d>] warn_slowpath_null+0x1d/0x20 [ 34.918991] [<ffffffffc03ce1fe>] uninit_mqd_hiq_sdma+0x4e/0x50 [amdgpu] [ 34.919028] [<ffffffffc03d0ef7>] uninitialize+0x37/0xe0 [amdgpu] [ 34.919064] [<ffffffffc03d15a6>] kernel_queue_uninit+0x16/0x30 [amdgpu] [ 34.919086] [<ffffffffc03d26c2>] pm_uninit+0x12/0x20 [amdgpu] [ 34.919107] [<ffffffffc03d4915>] stop_nocpsch+0x15/0x20 [amdgpu] [ 34.919129] [<ffffffffc03c1dce>] kgd2kfd_suspend.part.4+0x2e/0x50 [amdgpu] [ 34.919150] [<ffffffffc03c2667>] kgd2kfd_suspend+0x17/0x20 [amdgpu] [ 34.919171] [<ffffffffc03c103a>] amdgpu_amdkfd_suspend+0x1a/0x20 [amdgpu] [ 34.919187] [<ffffffffc02ec428>] amdgpu_device_suspend+0x88/0x3a0 [amdgpu] [ 34.919189] [<ffffffff922e22cf>] ? enqueue_entity+0x2ef/0xbe0 [ 34.919205] [<ffffffffc02e8220>] amdgpu_pmops_suspend+0x20/0x30 [amdgpu] [ 34.919207] [<ffffffff925c56ff>] pci_pm_suspend+0x6f/0x150 [ 34.919208] [<ffffffff925c5690>] ? pci_pm_freeze+0xf0/0xf0 [ 34.919210] [<ffffffff926b45c6>] dpm_run_callback+0x46/0x90 [ 34.919212] [<ffffffff926b49db>] __device_suspend+0xfb/0x2a0 [ 34.919213] [<ffffffff926b4b9f>] async_suspend+0x1f/0xa0 [ 34.919214] [<ffffffff922c918f>] async_run_entry_fn+0x3f/0x130 [ 34.919216] [<ffffffff922b9d4f>] process_one_work+0x17f/0x440 [ 34.919217] [<ffffffff922bade6>] worker_thread+0x126/0x3c0 [ 34.919218] [<ffffffff922bacc0>] ? manage_workers.isra.25+0x2a0/0x2a0 [ 34.919220] [<ffffffff922c1c31>] kthread+0xd1/0xe0 [ 34.919221] [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40 [ 34.919222] [<ffffffff92974c1d>] ret_from_fork_nospec_begin+0x7/0x21 [ 34.919224] [<ffffffff922c1b60>] ? insert_kthread_work+0x40/0x40 [ 34.919224] ---[ end trace 38cd9f65c963adad ]--- Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Oak Zeng <Oak.Zeng@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Yang Shi authored
[ Upstream commit 143c2a89 ] When running kprobe on -rt kernel, the below bug is caught: |BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931 |in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0 |Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140 |CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1 |Hardware name: Freescale LS1021A |[<8025a43c>] (___might_sleep) |[<80b5b324>] (rt_spin_lock) |[<80b5c31c>] (__patch_text_real) |[<80b5c3ac>] (patch_text_stop_machine) |[<802f2920>] (multi_cpu_stop) Since patch_text_stop_machine() is called in stop_machine() which disables IRQ, sleepable lock should be not used in this atomic context, so replace patch_lock to raw lock. Signed-off-by:
Yang Shi <yang.shi@linaro.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Ilia Mirkin authored
[ Upstream commit fc782242 ] GF117 appears to use the same register as GK104 (but still with the general Fermi readout mechanism). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Leo Yan authored
[ Upstream commit a0f890ab ] This patch is to add the AMBA device ID for CA73 CPU, so that CPU debug module can be initialized successfully when a SoC contain CA73 CPUs. This patch has been verified on 96boards Hikey960. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Zhang Rui authored
[ Upstream commit b6a3e147 ] On some Samsung hardware, it is necessary to clear events accumulated by the EC during sleep. These ECs stop reporting GPEs until they are manually polled, if too many events are accumulated. Thus the CLEAR_ON_RESUME quirk is introduced to send EC query commands unconditionally after resume to clear all the EC query events on those platforms. Later, commit 4c237371 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk") removes the CLEAR_ON_RESUME quirk because we thought the new EC IRQ polling logic should handle this case. Now it has been proved that the EC IRQ Polling logic does not fix the issue actually because we got regression report on these Samsung platforms after removing the quirk. Thus revert commit 4c237371 ("ACPI / EC: Remove old CLEAR_ON_RESUME quirk") to introduce back the Samsung quirk in this patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=44161Tested-by:
Ortwin Glück <odi@odi.ch> Tested-by:
Francisco Cribari <cribari@gmail.com> Tested-by:
Balazs Varga <balazs4web@gmail.com> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lars Persson authored
[ Upstream commit c34a8382 ] Clients may submit a new requests from the completion callback context. The driver was not prepared to receive a request in this state because it already held the request queue lock and a recursive lock error is triggered. Now all completions are queued up until we are ready to drop the queue lock and then delivered. The fault was triggered by TCP over an IPsec connection in the LTP test suite: LTP: starting tcp4_ipsec02 (tcp_ipsec.sh -p ah -m transport -s "100 1000 65535") BUG: spinlock recursion on CPU#1, genload/943 lock: 0xbf3c3094, .magic: dead4ead, .owner: genload/943, .owner_cpu: 1 CPU: 1 PID: 943 Comm: genload Tainted: G O 4.9.62-axis5-devel #6 Hardware name: Axis ARTPEC-6 Platform (unwind_backtrace) from [<8010d134>] (show_stack+0x18/0x1c) (show_stack) from [<803a289c>] (dump_stack+0x84/0x98) (dump_stack) from [<8016e164>] (do_raw_spin_lock+0x124/0x128) (do_raw_spin_lock) from [<804de1a4>] (artpec6_crypto_submit+0x2c/0xa0) (artpec6_crypto_submit) from [<804def38>] (artpec6_crypto_prepare_submit_hash+0xd0/0x54c) (artpec6_crypto_prepare_submit_hash) from [<7f3165f0>] (ah_output+0x2a4/0x3dc [ah4]) (ah_output [ah4]) from [<805df9bc>] (xfrm_output_resume+0x178/0x4a4) (xfrm_output_resume) from [<805d283c>] (xfrm4_output+0xac/0xbc) (xfrm4_output) from [<80587928>] (ip_queue_xmit+0x140/0x3b4) (ip_queue_xmit) from [<805a13b4>] (tcp_transmit_skb+0x4c4/0x95c) (tcp_transmit_skb) from [<8059f218>] (tcp_rcv_state_process+0xdf4/0xdfc) (tcp_rcv_state_process) from [<805a7530>] (tcp_v4_do_rcv+0x64/0x1ac) (tcp_v4_do_rcv) from [<805a9724>] (tcp_v4_rcv+0xa34/0xb74) (tcp_v4_rcv) from [<80581d34>] (ip_local_deliver_finish+0x78/0x2b0) (ip_local_deliver_finish) from [<8058259c>] (ip_local_deliver+0xe4/0x104) (ip_local_deliver) from [<805d23ec>] (xfrm4_transport_finish+0xf4/0x144) (xfrm4_transport_finish) from [<805df564>] (xfrm_input+0x4f4/0x74c) (xfrm_input) from [<804de420>] (artpec6_crypto_task+0x208/0x38c) (artpec6_crypto_task) from [<801271b0>] (tasklet_action+0x60/0xec) (tasklet_action) from [<801266d4>] (__do_softirq+0xcc/0x3a4) (__do_softirq) from [<80126d20>] (irq_exit+0xf4/0x15c) (irq_exit) from [<801741e8>] (__handle_domain_irq+0x68/0xbc) (__handle_domain_irq) from [<801014f0>] (gic_handle_irq+0x50/0x94) (gic_handle_irq) from [<80657370>] (__irq_usr+0x50/0x80) Signed-off-by:
Lars Persson <larper@axis.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Hsin-Yi, Wang authored
[ Upstream commit 46f3ceaf ] Move mipi_dsi_dcs_set_display_off() from innolux_panel_disable() to innolux_panel_unprepare(), so they are consistent with innolux_panel_enable() and innolux_panel_prepare(). This also fixes some mode check and irq timeout issue in MTK dsi code. Since some dsi code (e.g. mtk_dsi) have following call trace: 1. drm_panel_disable(), which calls innolux_panel_disable() 2. switch to cmd mode 3. drm_panel_unprepare(), which calls innolux_panel_unprepare() However, mtk_dsi needs to be in cmd mode to be able to send commands (e.g. mipi_dsi_dcs_set_display_off() and mipi_dsi_dcs_enter_sleep_mode()), so we need these functions to be called after the switch to cmd mode happens, i.e. in innolux_panel_unprepare. Signed-off-by:
Hsin-Yi, Wang <hsinyi@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190109065922.231753-1-hsinyi@chromium.orgSigned-off-by:
-
Christophe Leroy authored
[ Upstream commit 59a12205 ] Introduce lkdtm tests for NULL pointer dereference: check access or exec at NULL address, since these errors tend to be reported differently from the general fault error text. For example from x86: pr_alert("BUG: unable to handle kernel %s at %px\n", address < PAGE_SIZE ? "NULL pointer dereference" : "paging request", (void *)address); Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Christophe Leroy authored
[ Upstream commit 4c411157 ] Today, when doing a lkdtm test before the readiness of the random generator, (ptrval) is printed instead of the address at which it perform the fault: [ 1597.337030] lkdtm: Performing direct entry EXEC_USERSPACE [ 1597.337142] lkdtm: attempting ok execution at (ptrval) [ 1597.337398] lkdtm: attempting bad execution at (ptrval) [ 1597.337460] kernel tried to execute user page (77858000) -exploit attempt? (uid: 0) [ 1597.344769] Unable to handle kernel paging request for instruction fetch [ 1597.351392] Faulting instruction address: 0x77858000 [ 1597.356312] Oops: Kernel access of bad area, sig: 11 [#1] If the lkdtm test is done later on, it prints an hashed address. In both cases this is pointless. The purpose of the test is to ensure the kernel generates an Oops at the expected address, so real addresses needs to be printed. This patch fixes that. Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit b6e1fd17 ] This fixes splats like the one below if CONFIG_DEBUG_ATOMIC_SLEEP=y and machine (Tegra30) booted with SMP=n or all secondary CPU's are put offline. Locking isn't needed because it protects atomic operation. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254 in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G C 4.18.0-next-20180821-00180-gc3ebb6544e44-dirty #823 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [<c01134f4>] (unwind_backtrace) from [<c010db2c>] (show_stack+0x20/0x24) [<c010db2c>] (show_stack) from [<c0bd0f3c>] (dump_stack+0x94/0xa8) [<c0bd0f3c>] (dump_stack) from [<c0151df8>] (___might_sleep+0x13c/0x174) [<c0151df8>] (___might_sleep) from [<c0151ea0>] (__might_sleep+0x70/0xa8) [<c0151ea0>] (__might_sleep) from [<c0bec2b8>] (mutex_lock+0x2c/0x70) [<c0bec2b8>] (mutex_lock) from [<c0589844>] (tegra_powergate_is_powered+0x44/0xa8) [<c0589844>] (tegra_powergate_is_powered) from [<c0581a60>] (tegra30_cpu_rail_off_ready+0x30/0x74) [<c0581a60>] (tegra30_cpu_rail_off_ready) from [<c0122244>] (tegra30_idle_lp2+0xa0/0x108) [<c0122244>] (tegra30_idle_lp2) from [<c0853438>] (cpuidle_enter_state+0x140/0x540) [<c0853438>] (cpuidle_enter_state) from [<c08538a4>] (cpuidle_enter+0x40/0x4c) [<c08538a4>] (cpuidle_enter) from [<c01595e0>] (call_cpuidle+0x30/0x48) [<c01595e0>] (call_cpuidle) from [<c01599f8>] (do_idle+0x238/0x28c) [<c01599f8>] (do_idle) from [<c0159d28>] (cpu_startup_entry+0x28/0x2c) [<c0159d28>] (cpu_startup_entry) from [<c0be76c8>] (rest_init+0xd8/0xdc) [<c0be76c8>] (rest_init) from [<c1200f50>] (start_kernel+0x41c/0x430) Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Julia Cartwright authored
[ Upstream commit cffaaf0c ] Commit 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path") changed the type of the path data, however, the change in path type was not reflected in size calculations. Update to use the correct type and prevent a buffer overflow. This bug manifests in systems with deep PCI hierarchies, and can lead to an overflow of the static allocated buffer (dmar_pci_notify_info_buf), or can lead to overflow of slab-allocated data. BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0 Write of size 1 at addr ffffffff90445d80 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1 Call Trace: ? dump_stack+0x46/0x59 ? print_address_description+0x1df/0x290 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? kasan_report+0x256/0x340 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? e820__memblock_setup+0xb0/0xb0 ? dmar_dev_scope_init+0x424/0x48f ? __down_write_common+0x1ec/0x230 ? dmar_dev_scope_init+0x48f/0x48f ? dmar_free_unused_resources+0x109/0x109 ? cpumask_next+0x16/0x20 ? __kmem_cache_create+0x392/0x430 ? kmem_cache_create+0x135/0x2f0 ? e820__memblock_setup+0xb0/0xb0 ? intel_iommu_init+0x170/0x1848 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? migrate_enable+0x27a/0x5b0 ? sched_setattr+0x20/0x20 ? migrate_disable+0x1fc/0x380 ? task_rq_lock+0x170/0x170 ? try_to_run_init_process+0x40/0x40 ? locks_remove_file+0x85/0x2f0 ? dev_prepare_static_identity_mapping+0x78/0x78 ? rt_spin_unlock+0x39/0x50 ? lockref_put_or_lock+0x2a/0x40 ? dput+0x128/0x2f0 ? __rcu_read_unlock+0x66/0x80 ? __fput+0x250/0x300 ? __rcu_read_lock+0x1b/0x30 ? mntput_no_expire+0x38/0x290 ? e820__memblock_setup+0xb0/0xb0 ? pci_iommu_init+0x25/0x63 ? pci_iommu_init+0x25/0x63 ? do_one_initcall+0x7e/0x1c0 ? initcall_blacklisted+0x120/0x120 ? kernel_init_freeable+0x27b/0x307 ? rest_init+0xd0/0xd0 ? kernel_init+0xf/0x120 ? rest_init+0xd0/0xd0 ? ret_from_fork+0x1f/0x40 The buggy address belongs to the variable: dmar_pci_notify_info_buf+0x40/0x60 Fixes: 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path") Signed-off-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit c6431650 ] The SHA512 code we adopted from the OpenSSL project uses a rather peculiar way to take the address of the round constant table: it takes the address of the sha256_block_data_order() routine, and substracts a constant known quantity to arrive at the base of the table, which is emitted by the same assembler code right before the routine's entry point. However, recent versions of binutils have helpfully changed the behavior of references emitted via an ADR instruction when running in Thumb2 mode: it now takes the Thumb execution mode bit into account, which is bit 0 af the address. This means the produced table address also has bit 0 set, and so we end up with an address value pointing 1 byte past the start of the table, which results in crashes such as Unable to handle kernel paging request at virtual address bf825000 pgd = 42f44b11 [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000 Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2 Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ... CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm] LR is at __this_module+0x17fd/0xffffe800 [sha256_arm] pc : [<bf820bca>] lr : [<bf824ffd>] psr: 800b0033 sp : ebc8bbe8 ip : faaabe1c fp : 2fdd3433 r10: 4c5f1692 r9 : e43037df r8 : b04b0a5a r7 : c369d722 r6 : 39c3693e r5 : 7a013189 r4 : 1580d26b r3 : 8762a9b0 r2 : eea9c2cd r1 : 3e9ab536 r0 : 1dea4ae7 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user Control: 70c5383d Table: 6b8467c0 DAC: dbadc0de Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23) Stack: (0xebc8bbe8 to 0xebc8c000) ... unwind: Unknown symbol address bf820bca unwind: Index not found bf820bca Code: 441a ea80 40f9 440a (f85e) 3b04 ---[ end trace e560cce92700ef8a ]--- Given that this affects older kernels as well, in case they are built with a recent toolchain, apply a minimal backportable fix, which is to emit another non-code label at the start of the routine, and reference that instead. (This is similar to the current upstream state of this file in OpenSSL) Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 69216a54 ] The SHA256 code we adopted from the OpenSSL project uses a rather peculiar way to take the address of the round constant table: it takes the address of the sha256_block_data_order() routine, and substracts a constant known quantity to arrive at the base of the table, which is emitted by the same assembler code right before the routine's entry point. However, recent versions of binutils have helpfully changed the behavior of references emitted via an ADR instruction when running in Thumb2 mode: it now takes the Thumb execution mode bit into account, which is bit 0 af the address. This means the produced table address also has bit 0 set, and so we end up with an address value pointing 1 byte past the start of the table, which results in crashes such as Unable to handle kernel paging request at virtual address bf825000 pgd = 42f44b11 [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000 Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2 Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ... CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm] LR is at __this_module+0x17fd/0xffffe800 [sha256_arm] pc : [<bf820bca>] lr : [<bf824ffd>] psr: 800b0033 sp : ebc8bbe8 ip : faaabe1c fp : 2fdd3433 r10: 4c5f1692 r9 : e43037df r8 : b04b0a5a r7 : c369d722 r6 : 39c3693e r5 : 7a013189 r4 : 1580d26b r3 : 8762a9b0 r2 : eea9c2cd r1 : 3e9ab536 r0 : 1dea4ae7 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user Control: 70c5383d Table: 6b8467c0 DAC: dbadc0de Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23) Stack: (0xebc8bbe8 to 0xebc8c000) ... unwind: Unknown symbol address bf820bca unwind: Index not found bf820bca Code: 441a ea80 40f9 440a (f85e) 3b04 ---[ end trace e560cce92700ef8a ]--- Given that this affects older kernels as well, in case they are built with a recent toolchain, apply a minimal backportable fix, which is to emit another non-code label at the start of the routine, and reference that instead. (This is similar to the current upstream state of this file in OpenSSL) Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit a1c6ca3c ] It is possible to observe hung_task complaints when system goes to suspend-to-idle state: # echo freeze > /sys/power/state PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. sd 0:0:0:0: [sda] Synchronizing SCSI cache INFO: task bash:1569 blocked for more than 120 seconds. Not tainted 4.19.0-rc3_+ #687 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. bash D 0 1569 604 0x00000000 Call Trace: ? __schedule+0x1fe/0x7e0 schedule+0x28/0x80 suspend_devices_and_enter+0x4ac/0x750 pm_suspend+0x2c0/0x310 Register a PM notifier to disable the detector on suspend and re-enable back on wakeup. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Steve French authored
[ Upstream commit 3b7960ca ] In cases where queryinfo fails, we have cases in cifs (vers=1.0) where with backupuid mounts we retry the query info with findfirst. This doesn't work to some NetApp servers which don't support WindowsXP (and later) infolevel 261 (SMB_FIND_FILE_ID_FULL_DIR_INFO) so in this case use other info levels (in this case it will usually be level 257, SMB_FIND_FILE_DIRECTORY_INFO). (Also fixes some indentation) See kernel bugzilla 201435 Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
ndesaulniers@google.com authored
[ Upstream commit fe0640eb ] Fixes the objtool warning seen with Clang: arch/x86/mm/fault.o: warning: objtool: no_context()+0x220: unreachable instruction Fixes commit 815f0ddb ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Josh noted that the fallback definition was meant to work around a pre-gcc-4.6 bug. GCC still needs to work around https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365, so compiler-gcc.h defines its own version of unreachable(). Clang and ICC can use this shared definition. Link: https://github.com/ClangBuiltLinux/linux/issues/204Suggested-by:
Andy Lutomirski <luto@amacapital.net> Suggested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Tested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Sean Christopherson authored
[ Upstream commit bd18bffc ] A VMEnter that VMFails (as opposed to VMExits) does not touch host state beyond registers that are explicitly noted in the VMFail path, e.g. EFLAGS. Host state does not need to be loaded because VMFail is only signaled for consistency checks that occur before the CPU starts to load guest state, i.e. there is no need to restore any state as nothing has been modified. But in the case where a VMFail is detected by hardware and not by KVM (due to deferring consistency checks to hardware), KVM has already loaded some amount of guest state. Luckily, "loaded" only means loaded to KVM's software model, i.e. vmcs01 has not been modified. So, unwind our software model to the pre-VMEntry host state. Not restoring host state in this VMFail path leads to a variety of failures because we end up with stale data in vcpu->arch, e.g. CR0, CR4, EFER, etc... will all be out of sync relative to vmcs01. Any significant delta in the stale data is all but guaranteed to crash L1, e.g. emulation of SMEP, SMAP, UMIP, WP, etc... will be wrong. An alternative to this "soft" reload would be to load host state from vmcs12 as if we triggered a VMExit (as opposed to VMFail), but that is wildly inconsistent with respect to the VMX architecture, e.g. an L1 VMM with separate VMExit and VMFail paths would explode. Note that this approach does not mean KVM is 100% accurate with respect to VMX hardware behavior, even at an architectural level (the exact order of consistency checks is microarchitecture specific). But 100% emulation accuracy isn't the goal (with this patch), rather the goal is to be consistent in the information delivered to L1, e.g. a VMExit should not fall-through VMENTER, and a VMFail should not jump to HOST_RIP. This technically reverts commit "5af41573 (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure)", but retains the core aspects of that patch, just in an open coded form due to the need to pull state from vmcs01 instead of vmcs12. Restoring host state resolves a variety of issues introduced by commit "4f350c6d (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly)", which remedied the incorrect behavior of treating VMFail like VMExit but in doing so neglected to restore arch state that had been modified prior to attempting nested VMEnter. A sample failure that occurs due to stale vcpu.arch state is a fault of some form while emulating an LGDT (due to emulated UMIP) from L1 after a failed VMEntry to L3, in this case when running the KVM unit test test_tpr_threshold_values in L1. L0 also hits a WARN in this case due to a stale arch.cr4.UMIP. L1: BUG: unable to handle kernel paging request at ffffc90000663b9e PGD 276512067 P4D 276512067 PUD 276513067 PMD 274efa067 PTE 8000000271de2163 Oops: 0009 [#1] SMP CPU: 5 PID: 12495 Comm: qemu-system-x86 Tainted: G W 4.18.0-rc2+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:native_load_gdt+0x0/0x10 ... Call Trace: load_fixmap_gdt+0x22/0x30 __vmx_load_host_state+0x10e/0x1c0 [kvm_intel] vmx_switch_vmcs+0x2d/0x50 [kvm_intel] nested_vmx_vmexit+0x222/0x9c0 [kvm_intel] vmx_handle_exit+0x246/0x15a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x850/0x1830 [kvm] kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm] do_vfs_ioctl+0x9f/0x600 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 L0: WARNING: CPU: 2 PID: 3529 at arch/x86/kvm/vmx.c:6618 handle_desc+0x28/0x30 [kvm_intel] ... CPU: 2 PID: 3529 Comm: qemu-system-x86 Not tainted 4.17.2-coffee+ #76 Hardware name: Intel Corporation Kabylake Client platform/KBL S RIP: 0010:handle_desc+0x28/0x30 [kvm_intel] ... Call Trace: kvm_arch_vcpu_ioctl_run+0x863/0x1840 [kvm] kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm] do_vfs_ioctl+0x9f/0x5e0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x49/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 5af41573 (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure) Fixes: 4f350c6d (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly) Cc: Jim Mattson <jmattson@google.com> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmáÅ
™ <rkrcmar@redhat.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ronald Tschalär authored
[ Upstream commit ca1721c5 ] On Apple machines, plugging-in or unplugging the power triggers a GPE for the EC. Since these machines expose an SBS device, this GPE ends up triggering the acpi_sbs_callback(). This in turn tries to get the status of the SBS charger. However, on MBP13,* and MBP14,* machines, performing the smbus-read operation to get the charger's status triggers the EC's GPE again. The result is an endless re-triggering and handling of that GPE, consuming significant CPU resources (> 50% in irq). In the end this is quite similar to commit 3031cdde (ACPI / SBS: Don't assume the existence of an SBS charger), except that on the above machines a status of all 1's is returned. And like there, we just want ignore the charger here. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198169Signed-off-by:
Ronald Tschalär <ronald@innovation.ch> Signed-off-by:
-
Maciej Żenczykowski authored
[ Upstream commit e0a2e73e ] Without this usbip fails on a machine with devices that lexicographically come after vhci_hcd. ie. $ ls -l /sys/devices/platform ... drwxr-xr-x. 4 root root 0 Sep 19 16:21 serial8250 -rw-r--r--. 1 root root 4096 Sep 19 23:50 uevent drwxr-xr-x. 6 root root 0 Sep 20 13:15 vhci_hcd.0 drwxr-xr-x. 4 root root 0 Sep 19 16:22 w83627hf.656 Because it detects 'w83627hf.656' as another vhci_hcd controller, and then fails to be able to talk to it. Note: this doesn't actually fix usbip's support for multiple controllers... that's still broken for other reasons ("vhci_hcd.0" is hardcoded in a string macro), but is enough to actually make it work on the above machine. See also: https://bugzilla.redhat.com/show_bug.cgi?id=1631148 Cc: Jonathan Dieter <jdieter@gmail.com> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-usb@vger.kernel.org Signed-off-by:
Maciej Żenczykowski <zenczykowski@gmail.com> Acked-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Tested-by:
Jonathan Dieter <jdieter@gmail.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
[ Upstream commit 6862fdf2 ] "S3C2410 PM Suspend Memory CRC" feature (controlled by SAMSUNG_PM_CHECK config option) is incompatible with highmem (uses phys_to_virt() instead of proper mapping) which is used by the majority of Exynos boards. The issue manifests itself in OOPS on affected boards, i.e. on Odroid-U3 I got the following one: Unable to handle kernel paging request at virtual address f0000000 pgd = 1c0f9bb4 [f0000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM [<c0458034>] (crc32_le) from [<c0121f8c>] (s3c_pm_makecheck+0x34/0x54) [<c0121f8c>] (s3c_pm_makecheck) from [<c0121efc>] (s3c_pm_run_res+0x74/0x8c) [<c0121efc>] (s3c_pm_run_res) from [<c0121ecc>] (s3c_pm_run_res+0x44/0x8c) [<c0121ecc>] (s3c_pm_run_res) from [<c01210b8>] (exynos_suspend_enter+0x64/0x148) [<c01210b8>] (exynos_suspend_enter) from [<c018893c>] (suspend_devices_and_enter+0x9ec/0xe74) [<c018893c>] (suspend_devices_and_enter) from [<c0189534>] (pm_suspend+0x770/0xc04) [<c0189534>] (pm_suspend) from [<c0186ce8>] (state_store+0x6c/0xcc) [<c0186ce8>] (state_store) from [<c09db434>] (kobj_attr_store+0x14/0x20) [<c09db434>] (kobj_attr_store) from [<c02fa63c>] (sysfs_kf_write+0x4c/0x50) [<c02fa63c>] (sysfs_kf_write) from [<c02f97a4>] (kernfs_fop_write+0xfc/0x1e4) [<c02f97a4>] (kernfs_fop_write) from [<c027b198>] (__vfs_write+0x2c/0x140) [<c027b198>] (__vfs_write) from [<c027b418>] (vfs_write+0xa4/0x160) [<c027b418>] (vfs_write) from [<c027b5d8>] (ksys_write+0x40/0x8c) [<c027b5d8>] (ksys_write) from [<c0101000>] (ret_fast_syscall+0x0/0x28) Add PLAT_S3C24XX, ARCH_S3C64XX and ARCH_S5PV210 dependencies to SAMSUNG_PM_CHECK config option to hide it on Exynos platforms. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Julian Sax authored
[ Upstream commit 9ee3e066 ] A particular touchpad (SIPODEV SP1064) refuses to supply the HID descriptors. This patch provides the framework for overriding these descriptors based on DMI data. It also includes the descriptors for said touchpad, which were extracted by listening to the traffic of the windows filter driver, as well as the DMI data for the laptops known to use this device. Relevant Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1526312 Cc: Hans de Goede <hdegoede@redhat.com> Reported-and-tested-by: ahormann@gmx.net Reported-and-tested-by:
Bruno Jesus <bruno.fl.jesus@gmail.com> Reported-and-tested-by:
Dietrich <enaut.w@googlemail.com> Reported-and-tested-by: kloxdami@yahoo.com Signed-off-by:
Julian Sax <jsbc@gmx.de> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Brad Love authored
[ Upstream commit 4add7104 ] If au0828_analog_register fails, the dev is kfree'd and then flow jumps to done, which can call au0828_usb_disconnect. Since all USB error codes are negative, au0828_usb_disconnect will be called. The problem is au0828_usb_disconnect uses dev, if dev is NULL then there is immediate oops encountered. [ 7.454307] au0828: au0828_usb_probe() au0282_dev_register failed to register on V4L2 [ 7.454323] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 7.454421] PGD 0 P4D 0 [ 7.454457] Oops: 0002 [#1] SMP PTI [ 7.454500] CPU: 1 PID: 262 Comm: systemd-udevd Tainted: P O 4.18.3 #1 [ 7.454584] Hardware name: Google Panther/Panther, BIOS MattDevo 04/27/2015 [ 7.454670] RIP: 0010:_raw_spin_lock_irqsave+0x2c/0x50 [ 7.454725] Code: 44 00 00 55 48 89 e5 41 54 53 48 89 fb 9c 58 0f 1f 44 00 00 49 89 c4 fa 66 0f 1f 44 00 00 e8 db 23 1b ff 31 c0 ba 01 00 00 00 <f0> 0f b1 13 85 c0 75 08 4c 89 e0 5b 41 5c 5d c3 89 c6 48 89 df e8 [ 7.455004] RSP: 0018:ffff9130f53ef988 EFLAGS: 00010046 [ 7.455063] RAX: 0000000000000000 RBX: 0000000000000050 RCX: 0000000000000000 [ 7.455139] RDX: 0000000000000001 RSI: 0000000000000003 RDI: 0000000000000050 [ 7.455216] RBP: ffff9130f53ef998 R08: 0000000000000018 R09: 0000000000000090 [ 7.455292] R10: ffffed4cc53cb000 R11: ffffed4cc53cb108 R12: 0000000000000082 [ 7.455369] R13: ffff9130cf2c6188 R14: 0000000000000000 R15: 0000000000000018 [ 7.455447] FS: 00007f2ff8514cc0(0000) GS:ffff9130fcb00000(0000) knlGS:0000000000000000 [ 7.455535] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.455597] CR2: 0000000000000050 CR3: 00000001753f0002 CR4: 00000000000606a0 [ 7.455675] Call Trace: [ 7.455713] __wake_up_common_lock+0x65/0xc0 [ 7.455764] __wake_up+0x13/0x20 [ 7.455808] ir_lirc_unregister+0x57/0xe0 [rc_core] [ 7.455865] rc_unregister_device+0xa0/0xc0 [rc_core] [ 7.455935] au0828_rc_unregister+0x25/0x40 [au0828] [ 7.455999] au0828_usb_disconnect+0x33/0x80 [au0828] [ 7.456064] au0828_usb_probe.cold.16+0x8d/0x2aa [au0828] [ 7.456130] usb_probe_interface+0xf1/0x300 [ 7.456184] driver_probe_device+0x2e3/0x460 [ 7.456235] __driver_attach+0xe4/0x110 [ 7.456282] ? driver_probe_device+0x460/0x460 [ 7.456335] bus_for_each_dev+0x74/0xb0 [ 7.456385] ? kmem_cache_alloc_trace+0x15d/0x1d0 [ 7.456441] driver_attach+0x1e/0x20 [ 7.456485] bus_add_driver+0x159/0x230 [ 7.456532] driver_register+0x70/0xc0 [ 7.456578] usb_register_driver+0x7f/0x140 [ 7.456626] ? 0xffffffffc0474000 [ 7.456674] au0828_init+0xbc/0x1000 [au0828] [ 7.456725] do_one_initcall+0x4a/0x1c9 [ 7.456771] ? _cond_resched+0x19/0x30 [ 7.456817] ? kmem_cache_alloc_trace+0x15d/0x1d0 [ 7.456873] do_init_module+0x60/0x210 [ 7.456918] load_module+0x221b/0x2710 [ 7.456966] ? vfs_read+0xf5/0x120 [ 7.457010] __do_sys_finit_module+0xbd/0x120 [ 7.457061] ? __do_sys_finit_module+0xbd/0x120 [ 7.457115] __x64_sys_finit_module+0x1a/0x20 [ 7.457166] do_syscall_64+0x5b/0x110 [ 7.457210] entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Nathan Fontenot authored
[ Upstream commit cd24e457 ] When a PRRN event is received we are already running in a worker thread. Instead of spawning off another worker thread on the prrn_work workqueue to handle the PRRN event we can just call the PRRN handler routine directly. With this update we can also pass the scope variable for the PRRN event directly to the handler instead of it being a global variable. This patch fixes the following oops mnessage we are seeing in PRRN testing: Oops: Bad kernel stack pointer, sig: 6 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache binfmt_misc reiserfs vfat fat rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag af_packet xfs libcrc32c dm_service_time ibmveth(X) ses enclosure scsi_transport_sas rtc_generic btrfs xor raid6_pq sd_mod ibmvscsi(X) scsi_transport_srp ipr(X) libata sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes, External 54 CPU: 7 PID: 18967 Comm: kworker/u96:0 Tainted: G X 4.4.126-94.22-default #1 Workqueue: pseries hotplug workque pseries_hp_work_fn task: c000000775367790 ti: c00000001ebd4000 task.ti: c00000070d140000 NIP: 0000000000000000 LR: 000000001fb3d050 CTR: 0000000000000000 REGS: c00000001ebd7d40 TRAP: 0700 Tainted: G X (4.4.126-94.22-default) MSR: 8000000102081000 <41,VEC,ME5 CR: 28000002 XER: 20040018 4 CFAR: 000000001fb3d084 40 419 1 3 GPR00: 000000000000000040000000000010007 000000001ffff400 000000041fffe200 GPR04: 000000000000008050000000000000000 000000001fb15fa8 0000000500000500 GPR08: 000000000001f40040000000000000001 0000000000000000 000005:5200040002 GPR12: 00000000000000005c000000007a05400 c0000000000e89f8 000000001ed9f668 GPR16: 000000001fbeff944000000001fbeff94 000000001fb545e4 0000006000000060 GPR20: ffffffffffffffff4ffffffffffffffff 0000000000000000 0000000000000000 GPR24: 00000000000000005400000001fb3c000 0000000000000000 000000001fb1b040 GPR28: 000000001fb240004000000001fb440d8 0000000000000008 0000000000000000 NIP [0000000000000000] 5 (null) LR [000000001fb3d050] 031fb3d050 Call Trace: 4 Instruction dump: 4 5:47 12 2 XXXXXXXX XXXXXXXX XXXXX4XX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXX5XX XXXXXXXX 60000000 60000000 60000000 60000000 ---[ end trace aa5627b04a7d9d6b ]--- 3NMI watchdog: BUG: soft lockup - CPU#27 stuck for 23s! [kworker/27:0:13903] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache binfmt_misc reiserfs vfat fat rpadlpar_io(X) rpaphp(X) tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag af_packet xfs libcrc32c dm_service_time ibmveth(X) ses enclosure scsi_transport_sas rtc_generic btrfs xor raid6_pq sd_mod ibmvscsi(X) scsi_transport_srp ipr(X) libata sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 Supported: Yes, External CPU: 27 PID: 13903 Comm: kworker/27:0 Tainted: G D X 4.4.126-94.22-default #1 Workqueue: events prrn_work_fn task: c000000747cfa390 ti: c00000074712c000 task.ti: c00000074712c000 NIP: c0000000008002a8 LR: c000000000090770 CTR: 000000000032e088 REGS: c00000074712f7b0 TRAP: 0901 Tainted: G D X (4.4.126-94.22-default) MSR: 8000000100009033 <SF,EE,ME,IR,DR,RI,LE> CR: 22482044 XER: 20040000 CFAR: c0000000008002c4 SOFTE: 1 GPR00: c000000000090770 c00000074712fa30 c000000000f09800 c000000000fa1928 6:02 GPR04: c000000775f5e000 fffffffffffffffe 0000000000000001 c000000000f42db8 GPR08: 0000000000000001 0000000080000007 0000000000000000 0000000000000000 GPR12: 8006210083180000 c000000007a14400 NIP [c0000000008002a8] _raw_spin_lock+0x68/0xd0 LR [c000000000090770] mobility_rtas_call+0x50/0x100 Call Trace: 59 5 [c00000074712fa60] [c000000000090770] mobility_rtas_call+0x50/0x100 [c00000074712faf0] [c000000000090b08] pseries_devicetree_update+0xf8/0x530 [c00000074712fc20] [c000000000031ba4] prrn_work_fn+0x34/0x50 [c00000074712fc40] [c0000000000e0390] process_one_work+0x1a0/0x4e0 [c00000074712fcd0] [c0000000000e0870] worker_thread+0x1a0/0x6105:57 2 [c00000074712fd80] [c0000000000e8b18] kthread+0x128/0x150 [c00000074712fe30] [c0000000000096f8] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 2c090000 40c20010 7d40192d 40c2fff0 7c2004ac 2fa90000 40de0018 5:540030 3 e8010010 ebe1fff8 7c0803a6 4e800020 <7c210b78> e92d0000 89290009 792affe3 Signed-off-by:
John Allen <jallen@linux.ibm.com> Signed-off-by:
Haren Myneni <haren@us.ibm.com> Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michal Simek authored
[ Upstream commit 4bb1ce23 ] When console device is rebinded, console_setup() is called again. But marking it as __init means that function will be clear after boot is complete. If console device is binded again console_setup() is not found and error "Unable to handle kernel paging request at virtual address" is reported. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 0d704967 ] cgroup v2 path field is PATH_MAX which is too large, this is placing too much pressure on memory allocation for people with many rules doing cgroup v1 classid matching, side effects of this are bug reports like: https://bugzilla.kernel.org/show_bug.cgi?id=200639 This patch registers a new revision that shrinks the cgroup path to 512 bytes, which is the same approach we follow in similar extensions that have a path field. Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 042be0f8 ] https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Dinu-Razvan Chis-Serban authored
[ Upstream commit 5e172f75 ] The default P9_LOCK_TIMEOUT can be too long for some users exporting a local file system to a guest VM (30s), make this configurable at mount time. Link: http://lkml.kernel.org/r/1536295827-3181-1-git-send-email-asmadeus@codewreck.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195727Signed-off-by:
Dinu-Razvan Chis-Serban <justcsdr@gmail.com> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Gertjan Halkes authored
[ Upstream commit 2803cf43 ] v9fs_dir_readdir() could deadloop if a struct was sent with a size set to -2 Link: http://lkml.kernel.org/r/1536134432-11997-1-git-send-email-asmadeus@codewreck.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88021Signed-off-by:
Gertjan Halkes <gertjan@google.com> Signed-off-by:
-
