Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]
Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This device use another protocol while sending the events.
It's the same as the one described as "serial" by Microsoft.
We are keeping here the sn_move and sn_pressure parameters for
egalax devices.

CC: Cedric Sodhi <manday@gmx.net>
CC: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Just another eGalax device.
Please note that adding this device to have_special_driver
in hid-core.c is not required anymore.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This patch adds USB ID for the touchpanel in Acer Iconia W500. The panel
supports up to five fingers, therefore the need for a new addition of panel
types.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This is just a renaming of USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH{N}
to USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_{PID} to handle more eGalax
devices.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Some eGalax devices are 4 or 5 fingers touches, wereas others are 2.
This patch removes the limit in which all eGalax presents 2 touches.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The previous implementation of eGalax protocol was not satisfying as
we had to manually set x/y ranges as they were corrupted after reading
the report descriptor.
Indeed, the report descriptor provided a stylus input interface which
override the correct values.

This patch omits this input, thus leaving the correct value untouched,
and the MT_QUIRK_EGALAX_XYZ_FIXUP not required anymore.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This allows ASUS Eee Slate touchscreens to work.
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: multitouch: decide if hid-multitouch needs to handle mt devices"
  HID: drivers/hid/hid-roccat.c: eliminate a null pointer dereference
  HID: hid-apple: add device ID of another wireless aluminium
  HID: Add device IDs for Macbook Pro 8 keyboards

This reverts commit 144060fe.

It causes a resume regression for Andi on his Acer Aspire 1830T post
3.1.  The screen just stays black after wakeup.

Also, it really looks like the wrong way to suspend and resume perf
events: I think they should be done as part of the CPU suspend and
resume, rather than as a notifier that does smp_call_function().
Reported-by: Andi Kleen <andi@firstfloor.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/linux-dm:
  dm: raid fix device status indicator when array initializing
  dm log userspace: add log device dependency
  dm log userspace: fix comment hyphens
  dm: add thin provisioning target
  dm: add persistent data library
  dm: add bufio
  dm: export dm get md
  dm table: add immutable feature
  dm table: add always writeable feature
  dm table: add singleton feature
  dm kcopyd: add dm_kcopyd_zero to zero an area
  dm: remove superfluous smp_mb
  dm: use local printk ratelimit
  dm table: propagate non rotational flag

* 'for-linus' of git://git.selinuxproject.org/~jmorris/linux-security:
  TOMOYO: Fix interactive judgment functionality.

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (21 commits)
  MAINTAINERS: add an entry for Edac Sandy Bridge driver
  edac: tag sb_edac as EXPERIMENTAL, as it requires more testing
  EDAC: Fix incorrect edac mode reporting in sb_edac
  edac: sb_edac: Add it to the building system
  edac: Add an experimental new driver to support Sandy Bridge CPU's
  i7300_edac: Fix error cleanup logic
  i7core_edac: Initialize memory name with cpu, channel, bank
  i7core_edac: Fix compilation on 32 bits arch
  i7core_edac: scrubbing fixups
  EDAC: Correct Kconfig dependencies
  i7core_edac: return -ENODEV if no MC is found
  i7core_edac: use edac's own way to print errors
  MAINTAINERS: remove dropped edac_mce.* from the file
  i7core_edac: Drop the edac_mce facility
  x86, MCE: Use notifier chain only for MCE decoding
  EDAC i7core: Use mce socketid for better compatibility
  i7core_edac: Don't enable memory scrubbing for Xeon 35xx
  i7core_edac: Add scrubbing support
  edac: Move edac main structs to include/linux/edac.h
  i7core_edac: Fix oops when trying to inject errors
  ...

* 'for-3.2' of git://linux-nfs.org/~bfields/linux:
  nfsd4: typo logical vs bitwise negate in nfsd4_decode_share_access

* 'misc-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  MAINTAINERS: Update entry for IA64
  [IA64] gpio: GENERIC_GPIO default must be n
  [IA64[ add CONFIG_NET_VENDOR_INTEL=y to default config files where needed
  [IA64] agp/hp-agp: Allow binding user memory to the AGP GART
  [IA64] sn2: add missing put_cpu()

Says Andrew:

 "60 patches.  That's good enough for -rc1 I guess.  I have quite a lot
  of detritus to be rechecked, work through maintainers, etc.

 - most of the remains of MM
 - rtc
 - various misc
 - cgroups
 - memcg
 - cpusets
 - procfs
 - ipc
 - rapidio
 - sysctl
 - pps
 - w1
 - drivers/misc
 - aio"

* akpm: (60 commits)
  memcg: replace ss->id_lock with a rwlock
  aio: allocate kiocbs in batches
  drivers/misc/vmw_balloon.c: fix typo in code comment
  drivers/misc/vmw_balloon.c: determine page allocation flag can_sleep outside loop
  w1: disable irqs in critical section
  drivers/w1/w1_int.c: multiple masters used same init_name
  drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
  drivers/power/ds2780_battery.c: add a nolock function to w1 interface
  drivers/power/ds2780_battery.c: create central point for calling w1 interface
  w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get it
  pps gpio client: add missing dependency
  pps: new client driver using GPIO
  pps: default echo function
  include/linux/dma-mapping.h: add dma_zalloc_coherent()
  sysctl: make CONFIG_SYSCTL_SYSCALL default to n
  sysctl: add support for poll()
  RapidIO: documentation update
  drivers/net/rionet.c: fix ethernet address macros for LE platforms
  RapidIO: fix potential null deref in rio_setup_device()
  RapidIO: add mport driver for Tsi721 bridge
  ...

While back-porting Johannes Weiner's patch "mm: memcg-aware global
reclaim" for an internal effort, we noticed a significant performance
regression during page-reclaim heavy workloads due to high contention of
the ss->id_lock.  This lock protects idr map, and serializes calls to
idr_get_next() in css_get_next() (which is used during the memcg hierarchy
walk).

Since idr_get_next() is just doing a look up, we need only serialize it
with respect to idr_remove()/idr_get_new().  By making the ss->id_lock a
rwlock, contention is greatly reduced and performance improves.

Tested: cat a 256m file from a ramdisk in a 128m container 50 times on
each core (one file + container per core) in parallel on a NUMA machine.
Result is the time for the test to complete in 1 of the containers.
Both kernels included Johannes' memcg-aware global reclaim patches.

Before rwlock patch: 1710.778s
After rwlock patch: 152.227s
Signed-off-by: Andrew Bresticker <abrestic@google.com>
Cc: Paul Menage <menage@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In testing aio on a fast storage device, I found that the context lock
takes up a fair amount of cpu time in the I/O submission path.  The reason
is that we take it for every I/O submitted (see __aio_get_req).  Since we
know how many I/Os are passed to io_submit, we can preallocate the kiocbs
in batches, reducing the number of times we take and release the lock.

In my testing, I was able to reduce the amount of time spent in
_raw_spin_lock_irq by .56% (average of 3 runs).  The command I used to
test this was:

   aio-stress -O -o 2 -o 3 -r 8 -d 128 -b 32 -i 32 -s 16384 <dev>

I also tested the patch with various numbers of events passed to
io_submit, and I ran the xfstests aio group of tests to ensure I didn't
break anything.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Daniel Ehrenberg <dehrenberg@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix typo in code comment.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In vmballoon_reserve_page(), flags has been passed from the callee
function (vmballoon_inflate here).  So, we can determine can_sleep outside
the loop.
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Interrupting w1_delay() in w1_read_bit() results in missing the low level
on the w1 line and receiving "1" instead of "0".

Add local_irq_save()/local_irq_restore() around the critical section
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using multiple masters, w1_int.c would use the .init_name from w1.c
for all entities, which will fail when creating a corresponding sysfs
entry.  This patch uses the unique name previously generated.

  WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x48/0x64()
  sysfs: cannot create duplicate filename '/devices/w1 bus master'
  Modules linked in:
  Call trace:
   [<9001a604>] warn_slowpath_common+0x34/0x44
   [<9001a64c>] warn_slowpath_fmt+0x14/0x18
   [<90078020>] sysfs_add_one+0x48/0x64
   [<900784ec>] create_dir+0x40/0x68
   [<9007857a>] sysfs_create_dir+0x66/0x78
   [<900c1a8a>] kobject_add_internal+0x6e/0x104
   [<900c1bc0>] kobject_add_varg+0x20/0x2c
   [<900c1c1c>] kobject_add+0x30/0x3c
   [<900dbd66>] device_add+0x6a/0x378
   [<900dbb4a>] device_initialize+0x12/0x48
   [<900dc080>] device_register+0xc/0x10
   [<900f99be>] w1_add_master_device+0x162/0x274
   [<90008e7a>] w1_gpio_probe+0x66/0xb4
   [<9000030c>] kernel_init+0x0/0xe8
   [<900dde54>] platform_drv_probe+0xc/0xe
   [<9000030c>] kernel_init+0x0/0xe8
   [<900dd4f8>] driver_probe_device+0x6c/0xdc
   [<900dd5fc>] __driver_attach+0x34/0x48
   [<900dcce8>] bus_for_each_dev+0x2c/0x48
   [<900dd5c8>] __driver_attach+0x0/0x48
   [<900dd38c>] driver_attach+0x10/0x14
   [<900dd16a>] bus_add_driver+0x6a/0x18c
   [<900dd768>] driver_register+0x60/0xb8
   [<90011594>] __initcall_w1_therm_init6+0x0/0x4
   [<90008e00>] w1_gpio_init+0x0/0x14
   [<9000030c>] kernel_init+0x0/0xe8
   [<900ddf48>] platform_driver_register+0x30/0x38
   [<90011594>] __initcall_w1_therm_init6+0x0/0x4
   [<90008e00>] w1_gpio_init+0x0/0x14
   [<9000030c>] kernel_init+0x0/0xe8
   [<900ddf5e>] platform_driver_probe+0xe/0x3c
   [<90008e0c>] w1_gpio_init+0xc/0x14
   [<90011594>] __initcall_w1_therm_init6+0x0/0x4
   [<90008e00>] w1_gpio_init+0x0/0x14
   [<900126d4>] do_one_initcall+0x34/0x130
   [<90000372>] kernel_init+0x66/0xe8
   [<90011594>] __initcall_w1_therm_init6+0x0/0x4
   [<9001ca3e>] do_exit+0x0/0x3a6
   [<9000030c>] kernel_init+0x0/0xe8
   [<9001ca3e>] do_exit+0x0/0x3a6

  ---[ end trace 5a9233884fead918 ]---
  kobject_add_internal failed for w1 bus master with -EEXIST, don't try to register things with the same name in the same directory.
Signed-off-by: Florian Faber <faber@faberman.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes the deadlock when inserting and removing the ds2780.
Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adds a nolock function to the w1 interface to avoid locking the
mutex if needed.
Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Simply creates one point to call the w1 interface.
Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Straightforward.  As an aside, the ida_init calls are not needed as far as
I can see needed.  (DEFINE_IDA does the same already).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: Clifton Barnes <cabarnes@indesign-llc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add "depends on GENERIC_HARDIRQS" to avoid compile breakage on s390:

drivers/built-in.o: In function `pps_gpio_remove':
linux-next/drivers/pps/clients/pps-gpio.c:189: undefined reference to `free_irq'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Nuss <jamesnuss@nanometrics.ca>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This client driver allows you to use a GPIO pin as a source for PPS
signals.  Platform data [1] are used to specify the GPIO pin number,
label, assert event edge type, and whether clear events are captured.

This driver is based on the work by Ricardo Martins who submitted an
initial implementation [2] of a PPS IRQ client driver to the linuxpps
mailing-list on Dec 3 2010.

[1] include/linux/pps-gpio.h
[2] http://ml.enneenne.com/pipermail/linuxpps/2010-December/004155.html

[akpm@linux-foundation.org: remove unneeded cast of void*]
Signed-off-by: James Nuss <jamesnuss@nanometrics.ca>
Cc: Ricardo Martins <rasm@fe.up.pt>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A default echo function has been provided so it is no longer an error when
you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo
function.  This allows some code re-use and also makes it easier to write
client drivers since the default echo function does not normally need to
change.
Signed-off-by: James Nuss <jamesnuss@nanometrics.ca>
Reviewed-by: Ben Gardiner <bengardiner@nanometrics.ca>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Cc: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Lots of driver code does a dma_alloc_coherent() and then zeroes out the
memory with a memset.  Make it easy for them.

Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When I tried to send a patch to remove it, Andi told me we still need to
keep compabitlies for old libc, so we can't remove this completely.  Then
just make it default to n and remove the doc from
feature-removal-schedule.txt.
Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adding support for poll() in sysctl fs allows userspace to receive
notifications of changes in sysctl entries.  This adds a infrastructure to
allow files in sysctl fs to be pollable and implements it for hostname and
domainname.

[akpm@linux-foundation.org: s/declare/define/ for definitions]
Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Greg KH <gregkh@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Update rapidio.txt to reflect changes from recent patch.
See http://marc.info/?l=linux-kernel&m=131285620113589&w=2 for details.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Liu Gang <Gang.Liu@freescale.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Modify Ethernet addess macros to be compatible with BE/LE platforms
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: <stable@kernel.org>		[2.6.39+]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The "goto cleanup" path can deference "rswitch" when it is NULL.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Chul Kim <chul.kim@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add RapidIO mport driver for IDT TSI721 PCI Express-to-SRIO bridge device.
 The driver provides full set of callback functions defined for mport
devices in RapidIO subsystem.  It also is compatible with current version
of RIONET driver (Ethernet over RapidIO messaging services).

This patch is applicable to kernel versions starting from 2.6.39.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>