- 29 Apr, 2013 40 commits
-
-
Jan Kara authored
Currently, dio_send_cur_page() submits bio before current page and cached sdio->cur_page is added to the bio if sdio->boundary is set. This is actually wrong because sdio->boundary means the current buffer is the last one before metadata needs to be read. So we should rather submit the bio after the current page is added to it. Signed-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Kazuya Mio <k-mio@sx.jp.nec.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
When we read/write a file sequentially, we will read/write not only the data blocks but also the indirect blocks that may not be physically adjacent to the data blocks. So filesystems set the BH_Boundary flag to submit the previous I/O before reading/writing an indirect block. However the generic direct IO code mishandles buffer_boundary(), setting sdio->boundary before each submit_page_section() call which results in sending only one page bios as underlying code thinks this page is the last in the contiguous extent. So fix the problem by setting sdio->boundary only if the current page is really the last one in the mapped extent. With this patch and "direct-io: submit bio after boundary buffer is added to it" I've measured about 10% throughput improvement of direct IO reads on ext3 with SATA harddrive (from 90 MB/s to 100 MB/s). With ramdisk, the improvement was about 3-fold (from 350 MB/s to 1.2 GB/s). For other filesystems (such as ext4), the improvements won't be as visible because the frequency of BH_Boundary flag being set is much smaller. Signed-off-by:
-
Toshi Kani authored
Fix a typo "end_pft" in the comment of walk_memory_range(). Signed-off-by:
Toshi Kani <toshi.kani@hp.com> Signed-off-by:
-
Vineet Gupta authored
This came to light when calling memblock allocator from arc port (for copying flattended DT). If a "0" alignment is passed, the allocator round_up() call incorrectly rounds up the size to 0. round_up(num, alignto) => ((num - 1) | (alignto -1)) + 1 While the obvious allocation failure causes kernel to panic, it is better to warn the caller to fix the code. Tejun suggested that instead of BUG_ON(!align) - which might be ineffective due to pending console init and such, it is better to WARN_ON, and continue the boot with a reasonable default align. Caller passing @size need not be handled similarly as the subsequent panic will indicate that anyhow. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hillf Danton authored
We have to recompute pgoff if the given page is huge, since result based on HPAGE_SIZE is not approapriate for scanning the vma interval tree, as shown by commit 36e4f20a ("hugetlb: do not use vma_hugecache_offset() for vma_prio_tree_foreach"). Signed-off-by:
Hillf Danton <dhillf@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Paul E. McKenney authored
There is an ifdef in page_cache_get_speculative() that checks for !SMP and TREE_RCU, which has been an impossible combination since the advent of TINY_RCU. The ifdef enables a fastpath that is valid when preemption is disabled by rcu_read_lock() in UP systems, which is the case when TINY_RCU is enabled. This commit therefore adjusts the ifdef to generate the fastpath when TINY_RCU is enabled. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reported-by:
Andi Kleen <andi@firstfloor.org> Signed-off-by:
-
Andrew Morton authored
Create a CONFIG_MMU=y stub for ramfs_nommu_expand_for_mapping() in the usual fashion. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
David Rientjes authored
On large systems with a lot of memory, walking all RAM to determine page types may take a half second or even more. In non-blockable contexts, the page allocator will emit a page allocation failure warning unless __GFP_NOWARN is specified. In such contexts, irqs are typically disabled and such a lengthy delay may even result in NMI watchdog timeouts. To fix this, suppress the page walk in such contexts when printing the page allocation failure warning. Signed-off-by:
David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by:
-
Robert Jarzmik authored
Use the events API to trace filemap loading and unloading of file pieces into the page cache. This patch aims at tracing the eviction reload cycle of executable and shared libraries pages in a memory constrained environment. The typical usage is to spot a specific device and inode (for example /lib/libc.so) to see the eviction cycles, and find out if frequently used code is rather spread across many pages (bad) or coallesced (good). Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Cc: Dave Chinner <david@fromorbit.com> Cc: Hugh Dickins <hughd@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Naoya Horiguchi authored
Currently page_action() does not check dirty flag to determine whether the error page is "clean mlocked/unevictable LRU" page. This doesn't cause any misjudgement because we do matching against "dirty mlocked/unevictable LRU" just before the check. But in order to make code consistent and/or to avoid potential regression, we had better check dirty flag explicitly. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Suggested-by:
Chen Gong <gong.chen@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Ming Lei authored
Commit ef3d0fd2 ("vfs: do (nearly) lockless generic_file_llseek") has removed i_mutex from generic_file_llseek, so update the comment accordingly. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
James Hogan authored
The WARN_ON(1) in DEBUG_LOCKS_WARN_ON is surprisingly awkward to track down when it's hit, as it's usually buried in macros, causing multiple instances to land on the same line number. This patch makes it more useful by switching to: WARN(1, "DEBUG_LOCKS_WARN_ON(%s)", #c); so that the particular DEBUG_LOCKS_WARN_ON is more easily identified and grep'd for. For example: WARNING: at kernel/mutex.c:198 _mutex_lock_nested+0x31c/0x380() DEBUG_LOCKS_WARN_ON(l->magic != l) Signed-off-by:James Hogan <james.hogan@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Howells <dhowells@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Sachin Kamat authored
kfree on a NULL pointer is a no-op. Remove the redundant null pointer check. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Dan Carpenter authored
We can't dereference "bg" before it has been assigned. GCC should have warned about this but "bg" was initialized to NULL. I've fixed that as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Reviewed-by:
-
Dan Carpenter authored
Smatch complains that if we hit an error (for example if the file is immutable) then "range" has uninitialized stack data and we copy it to the user. I've re-written the error handling to avoid this problem and make it a little cleaner as well. Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Jeff Liu authored
There is no need to start the inode update transactions before/while verifying the input flags. As a refinement, this patch delay the transactions utill the pre-check up is ok. Signed-off-by:
Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Borislav Petkov authored
It can accidentally happen that the faulting insn (the exact instruction bytes) is repeated a little further on in the trace. This causes that same instruction to be tagged twice, see example below. What we want to do, however, is to track back from the end of the whole disassembly so many lines as the slice which starts with the faulting instruction is long. This leads us to the actual faulting instruction and *then* we tag it. While we're at it, we can drop the sed "g" flag because we address only this one line. Also, if we point to an instruction which changes decoding depending on the slice being objdumped, like a Jcc insn, for example, we do not even tag it as a faulting instruction because the instruction decode changes in the second slice but we use that second format as a regex on the fsrst disassembled buffer and more often than not that instruction doesn't match. Again, simply tag the line which is deduced from the original "<>" marking we've received from the kernel. This also solves the pathologic issue of multiple tagging like this: 29:* 0f 0b ud2 <-- trapping instruction 2b:* 0f 0b ud2 <-- trapping instruction 2d:* 0f 0b ud2 <-- trapping instruction Double tagging example: Code: 34 dd 40 30 ad 81 48 c7 c0 80 f6 00 00 48 8b 3c 30 48 01 c6 b8 ff ff ff ff 48 8d 57 f0 48 39 f7 74 2f 49 8b 4c 24 08 48 8b 47 f0 <48> 39 48 08 75 0e eb 2a 66 90 48 8b 40 f0 48 39 48 08 74 1e 48 All code ======== 0: 34 dd xor $0xdd,%al 2: 40 30 ad 81 48 c7 c0 xor %bpl,-0x3f38b77f(%rbp) 9: 80 f6 00 xor $0x0,%dh c: 00 48 8b add %cl,-0x75(%rax) f: 3c 30 cmp $0x30,%al 11: 48 01 c6 add %rax,%rsi 14: b8 ff ff ff ff mov $0xffffffff,%eax 19: 48 8d 57 f0 lea -0x10(%rdi),%rdx 1d: 48 39 f7 cmp %rsi,%rdi 20: 74 2f je 0x51 22: 49 8b 4c 24 08 mov 0x8(%r12),%rcx 27: 48 8b 47 f0 mov -0x10(%rdi),%rax 2b:* 48 39 48 08 cmp %rcx,0x8(%rax) <-- trapping instruction 2f: 75 0e jne 0x3f 31: eb 2a jmp 0x5d 33: 66 90 xchg %ax,%ax 35: 48 8b 40 f0 mov -0x10(%rax),%rax 39:* 48 39 48 08 cmp %rcx,0x8(%rax) <-- trapping instruction 3d: 74 1e je 0x5d 3f: 48 rex.W Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Rob Landley authored
Generate asm-x86/cpufeature.h with posix-2008 commands instead of perl. Signed-off-by:
Rob Landley <rob@landley.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Josh Boyer <jwboyer@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: David Howells <dhowell@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Anurup m authored
There is a kernel memory leak observed when the proc file /proc/fs/fscache/stats is read. The reason is that in fscache_stats_open, single_open is called and the respective release function is not called during release. Hence fix with correct release function - single_release(). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=57101Signed-off-by:
Anurup m <anurup.m@huawei.com> Cc: shyju pv <shyju.pv@huawei.com> Cc: Sanil kumar <sanil.kumar@huawei.com> Cc: Nataraj m <nataraj.m@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: David Howells <dhowells@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Zhou Zhu authored
Removed legacy hw definitions in hw/mmp_ctrl.h. These definitions are for earlier soc versions and are not supported in this driver. Signed-off-by:
Zhou Zhu <zzhu3@marvell.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Lisa Du <cldu@marvell.com> Cc: Guoqing Li <ligq@marvell.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
H Hartley Sweeten authored
Remove the __init tags from the ep93xxfb_calc_fbsize() and ep93xxfb_alloc_videomem() functions to fix the section mismatch warnings. Use module_platform_driver() to remove the init/exit boilerplate. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Sachin Kamat authored
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by:
-
Haiyang Zhang authored
This is the driver for the Hyper-V Synthetic Video, which supports screen resolution up to Full HD 1920x1080 on Windows Server 2012 host, and 1600x1200 on Windows Server 2008 R2 or earlier. It also solves the double mouse cursor issue of the emulated video mode. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Cc: Olaf Hering <olaf@aepfle.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Devendra Naga authored
With make W=1 we get drivers/video/console/fbcon_cw.c: In function `cw_update_attr': drivers/video/console/fbcon_cw.c:30:8: warning: variable `t' set but not used [-Wunused-but-set-variable] fixed by removing as since its used nowhere Signed-off-by:
Devendra Naga <devendra.aaru@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Shubhrajyoti Datta authored
Convert the struct i2c_msg initialization to C99 format. This makes maintaining and editing the code simpler. Also helps once other fields like transferred are added in future. Thanks to Julia Lawall for automating the conversion. Signed-off-by:
Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Cc: Julia Lawall <julia@diku.dk> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Chen Gang authored
audit_trim_trees() calls get_tree(). If a failure occurs we must call put_tree(). [akpm@linux-foundation.org: run put_tree() before mutex_lock() for small scalability improvement] Signed-off-by:
Chen Gang <gang.chen@asianux.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
-
Chen Gang authored
In audit_data_to_entry() when a failure occurs we must check and free the tree and watch to avoid a memory leak. test: plan: test command: "auditctl -a exit,always -w /etc -F auid=-1" (on fedora17, need modify auditctl to let "-w /etc" has effect) running: under fedora17 x86_64, 2 CPUs 3.20GHz, 2.5GB RAM. let 15 auditctl processes continue running at the same time. monitor command: watch -d -n 1 "cat /proc/meminfo | awk '{print \$2}' \ | head -n 4 | xargs \ | awk '{print \"used \",\$1 - \$2 - \$3 - \$4}'" result: for original version: will use up all memory, within 3 hours. kill all auditctl, the memory still does not free. for new version (apply this patch): after 14 hours later, not find issues. Signed-off-by: -
Gao feng authored
The files which include kernel/audit.h are complied only when CONFIG_AUDIT is set. Just like audit_pid, there is no need to surround audit_ever_enabled with CONFIG_AUDIT. Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
-
Gao feng authored
audit_enabled has already been exported in include/linux/audit.h. and kernel/audit.h includes include/linux/audit.h, no need to export aduit_enabled again in kernel/audit.h Signed-off-by:
-
Gao feng authored
We only need to check if kauditd is valid after we start it, if kauditd is invalid, we will set kauditd_task to NULL. So next time, we will start kauditd again. It means if kauditd_task is not NULL,it must be valid. Signed-off-by:
-
Rakib Mullick authored
In audit_alloc_context() use kzalloc instead of kmalloc+memset. Also rename audit_zero_context() to audit_set_context(), to represent it's inner workings properly. [akpm@linux-foundation.org: remove audit_set_context() altogether - fold it into its caller] Signed-off-by:
Rakib Mullick <rakib.mullick@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
task_get_live_kthread() looks confusing and unneeded. It does get_task_struct() but only kthread_stop() needs this, it can be called even if the calller doesn't have a reference when we know that this kthread can't exit until we do kthread_stop(). kthread_park() and kthread_unpark() do not need get_task_struct(), the callers already have the reference. And it can not help if we can race with the exiting kthread anyway, kthread_park() can hang forever in this case. Change kthread_park() and kthread_unpark() to use to_live_kthread(), change kthread_stop() to do get_task_struct() by hand and remove task_get_live_kthread(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
"k->vfork_done != NULL" with a barrier() after to_kthread(k) in task_get_live_kthread(k) looks unclear, and sub-optimal because we load ->vfork_done twice. All we need is to ensure that we do not return to_kthread(NULL). Add a new trivial helper which loads/checks ->vfork_done once, this also looks more understandable. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial driver update from Greg Kroah-Hartman: "Here's the big tty/serial driver merge request for 3.10-rc1 Once again, Jiri has a number of TTY driver fixes and cleanups, and Peter Hurley came through with a bunch of ldisc fixes that resolve a number of reported issues. There are some other serial driver cleanups as well. All of these have been in the linux-next tree for a while" * tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits) tty/serial/sirf: fix MODULE_DEVICE_TABLE serial: mxs: drop superfluous {get|put}_device serial: mxs: fix buffer overflow ARM: PL011: add support for extended FIFO-size of PL011-r1p5 serial_core.c: add put_device() after device_find_child() tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe serial: sccnxp: Replace pdata.init/exit with regulator API serial: sccnxp: Do not override device name TTY: pty, fix compilation warning TTY: rocket, fix compilation warning TTY: ircomm: fix DTR being raised on hang up TTY: synclinkmp: fix DTR being raised on hang up TTY: synclink_gt: fix DTR being raised on hang up TTY: synclink: fix DTR being raised on hang up serial: 8250_dw: Fix the stub for dw8250_probe_acpi() serial: 8250_dw: Convert to devm_ioremap() serial: 8250_dw: Set port capabilities based on CPR register serial: 8250_dw: Let ACPI code extract the DMA client info serial: 8250_dw: Support clk framework also with ACPI serial: 8250_dw: Enable runtime PM ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver tree update from Greg Kroah-Hartman: "Here's the big staging driver tree update for 3.10-rc1 This update contains loads of comedi driver cleanups and fixes in here, iio updates, android driver changes, and other various staging driver cleanups. Thanks to some drivers being removed, and the comedi driver cleanups, we have removed more code than we added: 627 files changed, 65145 insertions(+), 76321 deletions(-) which is always nice to see. All of these have been in linux-next for a while." * tag 'staging-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (940 commits) staging: comedi: ni_labpc: fix legacy driver build staging: comedi: das800: cleanup the cio-das802/16 fifo comments staging: comedi: das800: rename CamelCase vars in das800_ai_do_cmd() staging: comedi: das800: tidy up the private data staging: comedi: das800: tidy up das800_interrupt() staging: comedi: das800: tidy up das800_ai_insn_read() staging: comedi: das800: tidy up das800_di_insn_bits() staging: comedi: das800: tidy up das800_do_insn_bits() staging: comedi: das800: remove extra divisor calculation call staging: comedi: das800: rename {enable,disable}_das800 staging: comedi: das800: tidy up subdevice init staging: comedi: das800: allow attaching without interrupt support staging: comedi: das800: interrupts are required for async command support staging: comedi: das800: tidy up das800_ai_do_cmdtest() staging: comedi: das800: remove 'volatile' on private data variables staging: comedi: das800: cleanup the boardinfo staging: comedi: das800: cleanup range table declarations staging: comedi: das800: introduce das800_ind_{write, read}() staging: comedi: das800: remove forward declarations staging: comedi: das800: move das800_set_frequency() ...
-
Linus Torvalds authored
Merge tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg Kroah-Hartman: "Here's the merge request for the driver core tree for 3.10-rc1 It's pretty small, just a number of driver core and sysfs updates and fixes, all of which have been in linux-next for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fixed conflict in kernel/rtmutex-tester.c, the locking tree had a better fix for the same sysfs file mode problem. * tag 'driver-core-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: PM / Runtime: Idle devices asynchronously after probe|release driver core: handle user namespaces properly with the uid/gid devtmpfs change driver core: devtmpfs: fix compile failure with CONFIG_UIDGID_STRICT_TYPE_CHECKS devtmpfs: add base.h include driver core: add uid and gid to devtmpfs sysfs: check if one entry has been removed before freeing sysfs: fix crash_notes_size build warning sysfs: fix use after free in case of concurrent read/write and readdir rtmutex-tester: fix mode of sysfs files Documentation: Add ABI entry for crash_notes and crash_notes_size sysfs: Add crash_notes_size to export percpu note size driver core: platform_device.h: fix checkpatch errors and warnings driver core: platform.c: fix checkpatch errors and warnings driver core: warn that platform_driver_probe can not use deferred probing sysfs: use atomic_inc_unless_negative in sysfs_get_active base: core: WARN() about bogus permissions on device attributes device: separate all subsys mutexes
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver update from Greg Kroah-Hartman: "Here's the big char / misc driver update for 3.10-rc1 A number of various driver updates, the majority being new functionality in the MEI driver subsystem (it's now a subsystem, it started out just a single driver), extcon updates, memory updates, hyper-v updates, and a bunch of other small stuff that doesn't fit in any other tree. All of these have been in linux-next for a while" * tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits) Tools: hv: Fix a checkpatch warning tools: hv: skip iso9660 mounts in hv_vss_daemon tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon tools: hv: use getmntent in hv_vss_daemon Tools: hv: Fix a checkpatch warning tools: hv: fix checks for origin of netlink message in hv_vss_daemon Tools: hv: fix warnings in hv_vss_daemon misc: mark spear13xx-pcie-gadget as broken mei: fix krealloc() misuse in in mei_cl_irq_read_msg() mei: reduce flow control only for completed messages mei: reseting -> resetting mei: fix reading large reposnes mei: revamp mei_irq_read_client_message function mei: revamp mei_amthif_irq_read_message mei: revamp hbm state machine Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers" Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes" scsi: pcmcia: nsp_cs: remove module init/exit function prototypes mei: wd: fix line over 80 characters misc: tsl2550: Use dev_pm_ops ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon update from Guenter Roeck: - New drivers for NCT6775, NCT6776, NCT6779, and LM95234. - Added support for LTC2974, LTC3883, LM25056, TMP431, TMP432, ADT7310, and ADT7320 to existing drivers. - Various code cleanups and minor improvements. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (54 commits) hwmon: (nct6775) Fix coding style problems hwmon: (nct6775) Constify strings hwmon: (tmp401) Add support for TMP432 hwmon: (tmp401) Add support for update_interval attribute hwmon: (tmp401) Reset valid flag when resetting temperature history hwmon: (tmp401) Simplification and cleanup hwmon: (tmp401) Use sysfs_create_group / sysfs_remove_group hwmon: (tmp401) Drop unused defines, use BIT for bit masks hwmon: (nct6775) Use ARRAY_SIZE for loops where possible documentation: hwmon: Fix typo in documentation/hwmon hwmon: (nct6775) Enable both AUXTIN and VIN3 on NCT6776 hwmon: (ad7314) use spi_get_drvdata() and spi_set_drvdata() MAINTAINERS: Add myself as maintainer for the NCT6775 driver hwmon: (nct6775) Expand scope of supported chips hwmon: (gpio-fan) Use is_visible to determine if attributes should be created hwmon: (tmp401) Fix device detection for TMP411B and TMP411C hwmon: Add driver for LM95234 hwmon: (tmp401) Add support for TMP431 hwmon: (pmbus/lm25066) Add support for LM25056 hwmon: (pmbus/lm25066) Refactor device specific coefficients ...
-
