1. 29 Sep, 2016 11 commits
    • David Howells's avatar
      rxrpc: Request more ACKs in slow-start mode · b112a670
      David Howells authored
      Set the request-ACK on more DATA packets whilst we're in slow start mode so
      that we get sufficient ACKs back to supply information to configure the
      window.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      b112a670
    • David Howells's avatar
      rxrpc: Reduce the rxrpc_local::services list to a pointer · 1e9e5c95
      David Howells authored
      Reduce the rxrpc_local::services list to just a pointer as we don't permit
      multiple service endpoints to bind to a single transport endpoints (this is
      excluded by rxrpc_lookup_local()).
      
      The reason we don't allow this is that if you send a request to an AFS
      filesystem service, it will try to talk back to your cache manager on the
      port you sent from (this is how file change notifications are handled).  To
      prevent someone from stealing your CM callbacks, we don't let AF_RXRPC
      sockets share a UDP socket if at least one of them has a service bound.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      1e9e5c95
    • David Howells's avatar
      rxrpc: When activating client conn channels, do state check inside lock · 2629c7fa
      David Howells authored
      In rxrpc_activate_channels(), the connection cache state is checked outside
      of the lock, which means it can change whilst we're waking calls up,
      thereby changing whether or not we're allowed to wake calls up.
      
      Fix this by moving the check inside the locked region.  The check to see if
      all the channels are currently busy can stay outside of the locked region.
      
      Whilst we're at it:
      
       (1) Split the locked section out into its own function so that we can call
           it from other places in a later patch.
      
       (2) Determine the mask of channels dependent on the state as we're going
           to add another state in a later patch that will restrict the number of
           simultaneous calls to 1 on a connection.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      2629c7fa
    • David Howells's avatar
      rxrpc: Make Tx loss-injection go through normal return and adjust tracing · a1767077
      David Howells authored
      In rxrpc_send_data_packet() make the loss-injection path return through the
      same code as the transmission path so that the RTT determination is
      initiated and any future timer shuffling will be done, despite the packet
      having been binned.
      
      Whilst we're at it:
      
       (1) Add to the tx_data tracepoint an indication of whether or not we're
           retransmitting a data packet.
      
       (2) When we're deciding whether or not to request an ACK, rather than
           checking if we're in fast-retransmit mode check instead if we're
           retransmitting.
      
       (3) Don't invoke the lose_skb tracepoint when losing a Tx packet as we're
           not altering the sk_buff refcount nor are we just seeing it after
           getting it off the Tx list.
      
       (4) The rxrpc_skb_tx_lost note is then no longer used so remove it.
      
       (5) rxrpc_lose_skb() no longer needs to deal with rxrpc_skb_tx_lost.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      a1767077
    • David Howells's avatar
      rxrpc: Fix exclusive client connections · 8732db67
      David Howells authored
      Exclusive connections are currently reusable (which they shouldn't be)
      because rxrpc_alloc_client_connection() checks the exclusive flag in the
      rxrpc_connection struct before it's initialised from the function
      parameters.  This means that the DONT_REUSE flag doesn't get set.
      
      Fix this by checking the function parameters for the exclusive flag.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      8732db67
    • David S. Miller's avatar
      Merge branch 'qcom-emac-acpi' · 31fbe81f
      David S. Miller authored
      Timur Tabi says:
      
      ====================
      Add basic ACPI support to the Qualcomm Technologies EMAC driver
      
      This patch series adds support to the EMAC driver for extracting addresses,
      interrupts, and some _DSDs (properties) from ACPI.  The first two patches
      clean up the code, and the third patch adds ACPI-specific functionality.
      
      The first patch fixes a bug with handling the platform_device for the
      internal PHY.  This phy is treated as a separate device in both DT and
      ACPI, but since the platform is not released automatically when the
      driver unloads, managed functions like devm_ioremap_resource cannot be
      used.
      
      The second patch replaces of_get_mac_address with its platform-independent
      equivalent device_get_mac_address.
      
      The third patch parses the ACPI tables to obtain the platform_device for
      the primary EMAC node ("QCOM8070") and the internal phy node ("QCOM8071").
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      31fbe81f
    • Timur Tabi's avatar
      net: qcom/emac: initial ACPI support · 5f3d3807
      Timur Tabi authored
      Add support for reading addresses, interrupts, and _DSD properties
      from ACPI tables, just like with device tree.  The HID for the
      EMAC device itself is QCOM8070.  The internal PHY is represented
      by a child node with a HID of QCOM8071.
      
      The EMAC also has some complex clock initialization requirements
      that are not represented by this patch.  This will be addressed
      in a future patch.
      Signed-off-by: default avatarTimur Tabi <timur@codeaurora.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f3d3807
    • Timur Tabi's avatar
      net: qcom/emac: use device_get_mac_address · 0de709ac
      Timur Tabi authored
      Replace the DT-specific of_get_mac_address() function with
      device_get_mac_address, which works on both DT and ACPI platforms.  This
      change makes it easier to add ACPI support.
      Signed-off-by: default avatarTimur Tabi <timur@codeaurora.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0de709ac
    • Timur Tabi's avatar
      net: qcom/emac: do not use devm on internal phy pdev · 54e19bc7
      Timur Tabi authored
      The platform_device returned by of_find_device_by_node() is not
      automatically released when the driver unprobes.  Therefore,
      managed calls like devm_ioremap_resource() should not be used.
      Instead, we manually allocate the resources and then free them
      on driver release.
      Signed-off-by: default avatarTimur Tabi <timur@codeaurora.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      54e19bc7
    • Josef Bacik's avatar
      bpf: allow access into map value arrays · 48461135
      Josef Bacik authored
      Suppose you have a map array value that is something like this
      
      struct foo {
      	unsigned iter;
      	int array[SOME_CONSTANT];
      };
      
      You can easily insert this into an array, but you cannot modify the contents of
      foo->array[] after the fact.  This is because we have no way to verify we won't
      go off the end of the array at verification time.  This patch provides a start
      for this work.  We accomplish this by keeping track of a minimum and maximum
      value a register could be while we're checking the code.  Then at the time we
      try to do an access into a MAP_VALUE we verify that the maximum offset into that
      region is a valid access into that memory region.  So in practice, code such as
      this
      
      unsigned index = 0;
      
      if (foo->iter >= SOME_CONSTANT)
      	foo->iter = index;
      else
      	index = foo->iter++;
      foo->array[index] = bar;
      
      would be allowed, as we can verify that index will always be between 0 and
      SOME_CONSTANT-1.  If you wish to use signed values you'll have to have an extra
      check to make sure the index isn't less than 0, or do something like index %=
      SOME_CONSTANT.
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Acked-by: default avatarAlexei Starovoitov <ast@kernel.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48461135
    • Eric Dumazet's avatar
      net: do not export sk_stream_write_space · 7836667c
      Eric Dumazet authored
      Since commit 900f65d3 ("tcp: move duplicate code from
      tcp_v4_init_sock()/tcp_v6_init_sock()") we no longer need
      to export sk_stream_write_space()
      
      From: Eric Dumazet <edumazet@google.com>
      Cc: Neal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7836667c
  2. 28 Sep, 2016 18 commits
  3. 27 Sep, 2016 11 commits