Commit 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()") has applied batched GRO_NORMAL packets processing
to all napi_gro_receive() users, including mac80211-based drivers.

However, this change has led to a regression in iwlwifi driver [1][2] as
it is required for NAPI users to call napi_complete_done() or
napi_complete() and the end of every polling iteration, whilst iwlwifi
doesn't use NAPI scheduling at all and just calls napi_gro_flush().
In that particular case, packets which have not been already flushed
from napi->rx_list stall in it until at least next Rx cycle.

Fix this by adding a manual flushing of the list to iwlwifi driver right
before napi_gro_flush() call to mimic napi_complete() logics.

I prefer to open-code gro_normal_list() rather than exporting it for 2
reasons:
* to prevent from using it and napi_gro_flush() in any new drivers,
  as it is the *really* bad way to use NAPI that should be avoided;
* to keep gro_normal_list() static and don't lose any CC optimizations.

I also don't add the "Fixes:" tag as the mentioned commit was only a
trigger that only exposed an improper usage of NAPI in this particular
driver.

[1] https://lore.kernel.org/netdev/PSXP216MB04388962C411CD0B17A86F47804A0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
[2] https://bugzilla.kernel.org/show_bug.cgi?id=205647Signed-off-by: Alexander Lobakin <alobakin@dlink.ru>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Reported-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yangbo Lu says:

====================
net: mscc: ocelot: fix potential issues accessing skbs list

Fix two prtential issues accessing skbs list.
- Break the matching loop when find the matching skb to avoid
  consuming more skbs incorrectly. The timestamp ID is only
  from 0 to 3 while the FIFO supports 128 timestamps at most.
- Convert to use skb queue instead of the list of skbs to provide
  protect with lock.

Changes for v2:
	- Split into two patches.
	- Converted to use skb queue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert to use skb queue instead of the list of skbs.
The skb queue could provide protection with lock.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Break the matching loop when find the matching skb for TX timestamp.
This is to avoid consuming more skbs incorrectly. The timestamp ID
is from 0 to 3 while the FIFO could support 128 timestamps at most.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In gve_alloc_queue_page_list(), when a page allocation fails,
qpl->num_entries will be wrong.  In this case priv->num_registered_pages
can underflow in gve_free_queue_page_list(), causing subsequent calls
to gve_alloc_queue_page_list() to fail.

Fixes: f5cedc84 ("gve: Add transmit and receive support")
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Any argument outside of that range would result in an out of bound
memory access, since the accessed array is 65536 bits long.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When user-space sets the OVS_UFID_F_OMIT_* flags, and the relevant
flow has no UFID, we can exceed the computed size, as
ovs_nla_put_identifier() will always dump an OVS_FLOW_ATTR_KEY
attribute.
Take the above in account when computing the flow command message
size.

Fixes: 74ed7ab9 ("openvswitch: Add support for unique flow IDs.")
Reported-by: Qi Jun Ding <qding@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the return paths for all I/O operations to ensure
that the I/O completed successfully.  Then pass the return
to the caller for further processing

Fixes: 01db923e ("net: phy: dp83869: Add TI dp83869 phy")
Reported-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to calculate the skb size correctly otherwise we risk triggering
skb_over_panic[1]. The issue is that data_len is added to the skb in a
nl attribute, but we don't account for its header size (nlattr 4 bytes)
and alignment. We account for it when calculating the total size in
the > PSAMPLE_MAX_PACKET_SIZE comparison correctly, but not when
allocating after that. The fix is simple - use nla_total_size() for
data_len when allocating.

To reproduce:
 $ tc qdisc add dev eth1 clsact
 $ tc filter add dev eth1 egress matchall action sample rate 1 group 1 trunc 129
 $ mausezahn eth1 -b bcast -a rand -c 1 -p 129
 < skb_over_panic BUG(), tail is 4 bytes past skb->end >

[1] Trace:
 [   50.459526][ T3480] skbuff: skb_over_panic: text:(____ptrval____) len:196 put:136 head:(____ptrval____) data:(____ptrval____) tail:0xc4 end:0xc0 dev:<NULL>
 [   50.474339][ T3480] ------------[ cut here ]------------
 [   50.481132][ T3480] kernel BUG at net/core/skbuff.c:108!
 [   50.486059][ T3480] invalid opcode: 0000 [#1] PREEMPT SMP
 [   50.489463][ T3480] CPU: 3 PID: 3480 Comm: mausezahn Not tainted 5.4.0-rc7 #108
 [   50.492844][ T3480] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
 [   50.496551][ T3480] RIP: 0010:skb_panic+0x79/0x7b
 [   50.498261][ T3480] Code: bc 00 00 00 41 57 4c 89 e6 48 c7 c7 90 29 9a 83 4c 8b 8b c0 00 00 00 50 8b 83 b8 00 00 00 50 ff b3 c8 00 00 00 e8 ae ef c0 fe <0f> 0b e8 2f df c8 fe 48 8b 55 08 44 89 f6 4c 89 e7 48 c7 c1 a0 22
 [   50.504111][ T3480] RSP: 0018:ffffc90000447a10 EFLAGS: 00010282
 [   50.505835][ T3480] RAX: 0000000000000087 RBX: ffff888039317d00 RCX: 0000000000000000
 [   50.507900][ T3480] RDX: 0000000000000000 RSI: ffffffff812716e1 RDI: 00000000ffffffff
 [   50.509820][ T3480] RBP: ffffc90000447a60 R08: 0000000000000001 R09: 0000000000000000
 [   50.511735][ T3480] R10: ffffffff81d4f940 R11: 0000000000000000 R12: ffffffff834a22b0
 [   50.513494][ T3480] R13: ffffffff82c10433 R14: 0000000000000088 R15: ffffffff838a8084
 [   50.515222][ T3480] FS:  00007f3536462700(0000) GS:ffff88803eac0000(0000) knlGS:0000000000000000
 [   50.517135][ T3480] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [   50.518583][ T3480] CR2: 0000000000442008 CR3: 000000003b222000 CR4: 00000000000006e0
 [   50.520723][ T3480] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [   50.522709][ T3480] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [   50.524450][ T3480] Call Trace:
 [   50.525214][ T3480]  skb_put.cold+0x1b/0x1b
 [   50.526171][ T3480]  psample_sample_packet+0x1d3/0x340
 [   50.527307][ T3480]  tcf_sample_act+0x178/0x250
 [   50.528339][ T3480]  tcf_action_exec+0xb1/0x190
 [   50.529354][ T3480]  mall_classify+0x67/0x90
 [   50.530332][ T3480]  tcf_classify+0x72/0x160
 [   50.531286][ T3480]  __dev_queue_xmit+0x3db/0xd50
 [   50.532327][ T3480]  dev_queue_xmit+0x18/0x20
 [   50.533299][ T3480]  packet_sendmsg+0xee7/0x2090
 [   50.534331][ T3480]  sock_sendmsg+0x54/0x70
 [   50.535271][ T3480]  __sys_sendto+0x148/0x1f0
 [   50.536252][ T3480]  ? tomoyo_file_ioctl+0x23/0x30
 [   50.537334][ T3480]  ? ksys_ioctl+0x5e/0xb0
 [   50.540068][ T3480]  __x64_sys_sendto+0x2a/0x30
 [   50.542810][ T3480]  do_syscall_64+0x73/0x1f0
 [   50.545383][ T3480]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 [   50.548477][ T3480] RIP: 0033:0x7f35357d6fb3
 [   50.551020][ T3480] Code: 48 8b 0d 18 90 20 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 d3 20 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 eb f6 ff ff 48 89 04 24
 [   50.558547][ T3480] RSP: 002b:00007ffe0c7212c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
 [   50.561870][ T3480] RAX: ffffffffffffffda RBX: 0000000001dac010 RCX: 00007f35357d6fb3
 [   50.565142][ T3480] RDX: 0000000000000082 RSI: 0000000001dac2a2 RDI: 0000000000000003
 [   50.568469][ T3480] RBP: 00007ffe0c7212f0 R08: 00007ffe0c7212d0 R09: 0000000000000014
 [   50.571731][ T3480] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000082
 [   50.574961][ T3480] R13: 0000000001dac2a2 R14: 0000000000000001 R15: 0000000000000003
 [   50.578170][ T3480] Modules linked in: sch_ingress virtio_net
 [   50.580976][ T3480] ---[ end trace 61a515626a595af6 ]---

CC: Yotam Gigi <yotamg@mellanox.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Jamal Hadi Salim <jhs@mojatatu.com>
CC: Simon Horman <simon.horman@netronome.com>
CC: Roopa Prabhu <roopa@cumulusnetworks.com>
Fixes: 6ae0a628 ("net: Introduce psample, a new genetlink channel for packet sampling")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phong Tran says:

====================
Fix -Wcast-function-type usb net drivers

Change log with v1:
 - Modify suffix of patch subject.
 - Did the checkpatch.pl (remove the space, add a blank line).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

correct usage prototype of callback in tasklet_init().
Report by https://github.com/KSPP/linux/issues/20Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Note that the sysctl write accessor functions guarantee that:
  net->ipv4.sysctl_ip_prot_sock <= net->ipv4.ip_local_ports.range[0]
invariant is maintained, and as such the max() in selinux hooks is actually spurious.

ie. even though
  if (snum < max(inet_prot_sock(sock_net(sk)), low) || snum > high) {
per logic is the same as
  if ((snum < inet_prot_sock(sock_net(sk)) && snum < low) || snum > high) {
it is actually functionally equivalent to:
  if (snum < low || snum > high) {
which is equivalent to:
  if (snum < inet_prot_sock(sock_net(sk)) || snum < low || snum > high) {
even though the first clause is spurious.

But we want to hold on to it in case we ever want to change what what
inet_port_requires_bind_service() means (for example by changing
it from a, by default, [0..1024) range to some sort of set).

Test: builds, git 'grep inet_prot_sock' finds no other references
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Thomas Falcon says:

====================
ibmvnic: Harden device commands and queries

This patch series fixes some shortcomings with the current
VNIC device command implementation. The first patch fixes
the initialization of driver completion structures used
for device commands. Additionally, all waits for device
commands are bounded with a timeout in the event that the
device does not respond or becomes inoperable. Finally,
serialize queries to retain the integrity of device return
codes.

Changes in v2:

 - included header comment for ibmvnic_wait_for_completion
 - removed open-coded loop in patch 3/4, suggested by Jakub
 - ibmvnic_wait_for_completion accepts timeout value in milliseconds
   instead of jiffies
 - timeout calculations cleaned up and completed before wait loop
 - included missing mutex_destroy calls, suggested by Jakub
 - included comment before mutex declaration
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Provide some serialization for device CRQ commands
and queries to ensure that the shared variable used for
storing return codes is properly synchronized.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a wrapper for wait_for_completion calls with additional
driver checks to ensure that the driver does not wait on a
disabled device. In those cases or if the device does not respond
in an extended amount of time, this will allow the driver an
opportunity to recover.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we receive a notification that the device has been deactivated
or removed, force a completion of all waiting threads.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix multiple calls to init_completion for device completion
structures. Instead, initialize them during device probe and
reinitialize them later as needed.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It already existed in part of the function, but move it
to a higher level and use it consistently throughout.

Safe since sk is never written to.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It cannot overlap with the local port range - ie. with autobind selectable
ports - and not with reserved ports.

Indeed 'ip_local_reserved_ports' isn't even a range, it's a (by default
empty) set.

Fixes: 4548b683 ("Introduce a sysctl that modifies the value of PROT_SOCK.")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 4f07b80c ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.

Fixes: 4f07b80c ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IPMI updates from Corey Minyard:
 "Some small fixes accumulated for IPMI, nothing major"

* tag 'for-linus-5.5-1' of git://github.com/cminyard/linux-ipmi:
  ipmi: fix ipmb_poll()'s return type
  ipmi: kill off 'timespec' usage again
  drivers: ipmi: Support for both IPMB Req and Resp
  ipmi: Fix memory leak in __ipmi_bmc_register
  ipmi: bt-bmc: use devm_platform_ioremap_resource() to simplify code
  ipmi: use %*ph to print small buffer
  ipmi: Don't allow device module unload when in use

Pull i3c updates from Boris Brezillon:
 "Minor fixes and MAINTAINERS updates"

* tag 'i3c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  MAINTAINERS: add myself as maintainer of Cadence I3C master controller driver
  MAINTAINERS: Mark linux-i3c mailing list moderated
  i3c: Spelling s/dicovered/discovered/
  i3c: master: use i3c_dev_get_master()

Pull pcmcia updates from Dominik Brodowski:
 "Just a few odd fixes and improvements to the PCMCIA core"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: remove unused dprintk definition
  pcmcia: include <pcmcia/ds.h> for pcmcia_parse_tuple
  pcmcia: include cs_internal.h for missing declarations
  pcmcia: Use dev_get_drvdata where possible
  pcmcia: clean an indentation issues, remove extraneous spaces

Pull spi updates from Mark Brown:
 "Lots of stuff going on in the core for SPI this time around, the two
  big changes both being around time in different forms:

   - A rework of delay times from Alexandru Ardelean which makes the
     ways in which they are specified more consistent between drivers so
     that what's available to clients is less dependent on the hardware
     implementation.

   - Support for PTP timestamping of transfers from Vladimir Oltean,
     useful for use with precision clocks with SPI control interfaces.

   - Big cleanups for the Atmel, PXA2xx and Zynq QSPI drivers"

* tag 'spi-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (119 commits)
  dt-bindings: spi: Convert stm32 QSPI bindings to json-schema
  spi: pic32: Retire dma_request_slave_channel_compat()
  spi: Fix Kconfig indentation
  spi: mediatek: add SPI_CS_HIGH support
  spi: st-ssc4: add missed pm_runtime_disable
  spi: tegra20-slink: add missed clk_unprepare
  spi: tegra20-slink: Use dma_request_chan() directly for channel request
  spi: tegra114: Use dma_request_chan() directly for channel request
  spi: s3c64xx: Use dma_request_chan() directly for channel request
  spi: qup: Use dma_request_chan() directly for channel request
  spi: pl022: Use dma_request_chan() directly for channel request
  spi: imx: Use dma_request_chan() directly for channel request
  spi: fsl-lpspi: Use dma_request_chan() directly for channel request
  spi: atmel: Use dma_request_chan() directly for channel request
  spi: at91-usart: Use dma_request_chan() directly for channel request
  spi: fsl-cpm: Correct the free:ing
  spi: Fix regression to return zero on success instead of positive value
  spi: pxa2xx: Add missed security checks
  spi: nxp-fspi: Use devm API to fix missed unregistration of controller
  spi: omap2-mcspi: Remove redundant checks
  ...

Pull regulator updates from Mark Brown:
 "Another fairly quiet release for the regulator API, some work all
  around including some core work but mostly in specialist or driver
  specific code:

   - Fix for powering off boot-on regulators

   - Enhancements to the coupled regulator support introduced in the
     last release

   - Conversion of a bunch of drivers to the fwnode API for GPIOs

   - Mode support for DA9062

   - New device support for Qualcomm PM1650, PM8004 and PM895 and
     Silergy SR83X

   - Removal of obsolete AB8505 support"

* tag 'regulator-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits)
  regulator: da9062: Return REGULATOR_MODE_INVALID for invalid mode
  regulator: Fix Kconfig indentation
  regulator: tps6105x: add optional devicetree support
  tps6105x: add optional devicetree support
  regulator: rn5t618: fix rc5t619 ldo10 enable
  regulator: vexpress: Use PTR_ERR_OR_ZERO() to simplify code
  dt-bindings: mfd: da9062: describe buck modes
  regulator: da9062: add of_map_mode support for bucks
  regulator: da9062: refactor buck modes into header
  regulator: stpmic1: Set a default ramp delay value
  regulator: core: Let boot-on regulators be powered off
  regulator: core: Don't try to remove device links if add failed
  regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_id
  regulator: ab8500: Remove AB8505 USB regulator
  regulator: fan53555: add chip id for Silergy SYR83X
  regulator: fixed: add off-on-delay
  dt-bindings: regulator: fixed: add off-on-delay-us property
  regulator: core: Allow generic coupling only for always-on regulators
  regulator: core: Release coupled_rdevs on regulator_init_coupling() error
  regulator: bd70528: Add MODULE_ALIAS to allow module auto loading
  ...

Pull regmap update from Mark Brown:
 "Just one patch for this release removing some dead code"

* tag 'regmap-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regmap-w1: Drop unreachable code

Pull networking updates from David Miller:
 "Another merge window, another pull full of stuff:

   1) Support alternative names for network devices, from Jiri Pirko.

   2) Introduce per-netns netdev notifiers, also from Jiri Pirko.

   3) Support MSG_PEEK in vsock/virtio, from Matias Ezequiel Vara
      Larsen.

   4) Allow compiling out the TLS TOE code, from Jakub Kicinski.

   5) Add several new tracepoints to the kTLS code, also from Jakub.

   6) Support set channels ethtool callback in ena driver, from Sameeh
      Jubran.

   7) New SCTP events SCTP_ADDR_ADDED, SCTP_ADDR_REMOVED,
      SCTP_ADDR_MADE_PRIM, and SCTP_SEND_FAILED_EVENT. From Xin Long.

   8) Add XDP support to mvneta driver, from Lorenzo Bianconi.

   9) Lots of netfilter hw offload fixes, cleanups and enhancements,
      from Pablo Neira Ayuso.

  10) PTP support for aquantia chips, from Egor Pomozov.

  11) Add UDP segmentation offload support to igb, ixgbe, and i40e. From
      Josh Hunt.

  12) Add smart nagle to tipc, from Jon Maloy.

  13) Support L2 field rewrite by TC offloads in bnxt_en, from Venkat
      Duvvuru.

  14) Add a flow mask cache to OVS, from Tonghao Zhang.

  15) Add XDP support to ice driver, from Maciej Fijalkowski.

  16) Add AF_XDP support to ice driver, from Krzysztof Kazimierczak.

  17) Support UDP GSO offload in atlantic driver, from Igor Russkikh.

  18) Support it in stmmac driver too, from Jose Abreu.

  19) Support TIPC encryption and auth, from Tuong Lien.

  20) Introduce BPF trampolines, from Alexei Starovoitov.

  21) Make page_pool API more numa friendly, from Saeed Mahameed.

  22) Introduce route hints to ipv4 and ipv6, from Paolo Abeni.

  23) Add UDP segmentation offload to cxgb4, Rahul Lakkireddy"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1857 commits)
  libbpf: Fix usage of u32 in userspace code
  mm: Implement no-MMU variant of vmalloc_user_node_flags
  slip: Fix use-after-free Read in slip_open
  net: dsa: sja1105: fix sja1105_parse_rgmii_delays()
  macvlan: schedule bc_work even if error
  enetc: add support Credit Based Shaper(CBS) for hardware offload
  net: phy: add helpers phy_(un)lock_mdio_bus
  mdio_bus: don't use managed reset-controller
  ax88179_178a: add ethtool_op_get_ts_info()
  mlxsw: spectrum_router: Fix use of uninitialized adjacency index
  mlxsw: spectrum_router: After underlay moves, demote conflicting tunnels
  bpf: Simplify __bpf_arch_text_poke poke type handling
  bpf: Introduce BPF_TRACE_x helper for the tracing tests
  bpf: Add bpf_jit_blinding_enabled for !CONFIG_BPF_JIT
  bpf, testing: Add various tail call test cases
  bpf, x86: Emit patchable direct jump as tail call
  bpf: Constant map key tracking for prog array pokes
  bpf: Add poke dependency tracking for prog array maps
  bpf: Add initial poke descriptor table for jit images
  bpf: Move owner type, jited info into array auxiliary data
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Add library interfaces of certain crypto algorithms for WireGuard
   - Remove the obsolete ablkcipher and blkcipher interfaces
   - Move add_early_randomness() out of rng_mutex

  Algorithms:
   - Add blake2b shash algorithm
   - Add blake2s shash algorithm
   - Add curve25519 kpp algorithm
   - Implement 4 way interleave in arm64/gcm-ce
   - Implement ciphertext stealing in powerpc/spe-xts
   - Add Eric Biggers's scalar accelerated ChaCha code for ARM
   - Add accelerated 32r2 code from Zinc for MIPS
   - Add OpenSSL/CRYPTOGRAMS poly1305 implementation for ARM and MIPS

  Drivers:
   - Fix entropy reading failures in ks-sa
   - Add support for sam9x60 in atmel
   - Add crypto accelerator for amlogic GXL
   - Add sun8i-ce Crypto Engine
   - Add sun8i-ss cryptographic offloader
   - Add a host of algorithms to inside-secure
   - Add NPCM RNG driver
   - add HiSilicon HPRE accelerator
   - Add HiSilicon TRNG driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (285 commits)
  crypto: vmx - Avoid weird build failures
  crypto: lib/chacha20poly1305 - use chacha20_crypt()
  crypto: x86/chacha - only unregister algorithms if registered
  crypto: chacha_generic - remove unnecessary setkey() functions
  crypto: amlogic - enable working on big endian kernel
  crypto: sun8i-ce - enable working on big endian
  crypto: mips/chacha - select CRYPTO_SKCIPHER, not CRYPTO_BLKCIPHER
  hwrng: ks-sa - Enable COMPILE_TEST
  crypto: essiv - remove redundant null pointer check before kfree
  crypto: atmel-aes - Change data type for "lastc" buffer
  crypto: atmel-tdes - Set the IV after {en,de}crypt
  crypto: sun4i-ss - fix big endian issues
  crypto: sun4i-ss - hide the Invalid keylen message
  crypto: sun4i-ss - use crypto_ahash_digestsize
  crypto: sun4i-ss - remove dependency on not 64BIT
  crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c
  MAINTAINERS: Add maintainer for HiSilicon SEC V2 driver
  crypto: hisilicon - add DebugFS for HiSilicon SEC
  Documentation: add DebugFS doc for HiSilicon SEC
  crypto: hisilicon - add SRIOV for HiSilicon SEC
  ...

Merge tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - New API to track system state changes done be livepatch callbacks. It
   helps to maintain compatibility between livepatches.

 - Update Kconfig help text. ORC is another reliable unwinder.

 - Disable generic selftest timeout. Livepatch selftests have their own
   per-operation fine-grained timeouts.

* tag 'livepatching-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  x86/stacktrace: update kconfig help text for reliable unwinders
  livepatch: Selftests of the API for tracking system state changes
  livepatch: Documentation of the new API for tracking system state changes
  livepatch: Allow to distinguish different version of system state changes
  livepatch: Basic API to track system state changes
  livepatch: Keep replaced patches until post_patch callback is called
  selftests/livepatch: Disable the timeout

Pull printk updates from Petr Mladek:

 - Allow to print symbolic error names via new %pe modifier.

 - Use pr_warn() instead of the remaining pr_warning() calls. Fix
   formatting of the related lines.

 - Add VSPRINTF entry to MAINTAINERS.

* tag 'printk-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: (32 commits)
  checkpatch: don't warn about new vsprintf pointer extension '%pe'
  MAINTAINERS: Add VSPRINTF
  tools lib api: Renaming pr_warning to pr_warn
  ASoC: samsung: Use pr_warn instead of pr_warning
  lib: cpu_rmap: Use pr_warn instead of pr_warning
  trace: Use pr_warn instead of pr_warning
  dma-debug: Use pr_warn instead of pr_warning
  vgacon: Use pr_warn instead of pr_warning
  fs: afs: Use pr_warn instead of pr_warning
  sh/intc: Use pr_warn instead of pr_warning
  scsi: Use pr_warn instead of pr_warning
  platform/x86: intel_oaktrail: Use pr_warn instead of pr_warning
  platform/x86: asus-laptop: Use pr_warn instead of pr_warning
  platform/x86: eeepc-laptop: Use pr_warn instead of pr_warning
  oprofile: Use pr_warn instead of pr_warning
  of: Use pr_warn instead of pr_warning
  macintosh: Use pr_warn instead of pr_warning
  idsn: Use pr_warn instead of pr_warning
  ide: Use pr_warn instead of pr_warning
  crypto: n2: Use pr_warn instead of pr_warning
  ...

Pull cgroup updates from Tejun Heo:
 "There are several notable changes here:

   - Single thread migrating itself has been optimized so that it
     doesn't need threadgroup rwsem anymore.

   - Freezer optimization to avoid unnecessary frozen state changes.

   - cgroup ID unification so that cgroup fs ino is the only unique ID
     used for the cgroup and can be used to directly look up live
     cgroups through filehandle interface on 64bit ino archs. On 32bit
     archs, cgroup fs ino is still the only ID in use but it is only
     unique when combined with gen.

   - selftest and other changes"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
  writeback: fix -Wformat compilation warnings
  docs: cgroup: mm: Fix spelling of "list"
  cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()
  cgroup: use cgrp->kn->id as the cgroup ID
  kernfs: use 64bit inos if ino_t is 64bit
  kernfs: implement custom exportfs ops and fid type
  kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
  kernfs: convert kernfs_node->id from union kernfs_node_id to u64
  kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
  kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
  netprio: use css ID instead of cgroup ID
  writeback: use ino_t for inodes in tracepoints
  kernfs: fix ino wrap-around detection
  kselftests: cgroup: Avoid the reuse of fd after it is deallocated
  cgroup: freezer: don't change task and cgroups status unnecessarily
  cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency
  cgroup: remove cgroup_enable_task_cg_lists() optimization
  cgroup: pids: use atomic64_t for pids->limit
  selftests: cgroup: Run test_core under interfering stress
  selftests: cgroup: Add task migration tests
  ...

Pull workqueue updates from Tejun Heo:
 "There have been sporadic reports of sanity checks in
  destroy_workqueue() failing spuriously over the years. This contains
  the fix and its follow-up changes / fixes.

  There's also a RCU annotation improvement"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Add RCU annotation for pwq list walk
  workqueue: Fix pwq ref leak in rescuer_thread()
  workqueue: more destroy_workqueue() fixes
  workqueue: Minor follow-ups to the rescuer destruction change
  workqueue: Fix missing kfree(rescuer) in destroy_workqueue()
  workqueue: Fix spurious sanity check failures in destroy_workqueue()

Pull thread management updates from Christian Brauner:

 - A pidfd's fdinfo file currently contains the field "Pid:\t<pid>"
   where <pid> is the pid of the process in the pid namespace of the
   procfs instance the fdinfo file for the pidfd was opened in.

   The fdinfo file has now gained a new "NSpid:\t<ns-pid1>[\t<ns-pid2>[...]]"
   field which lists the pids of the process in all child pid namespaces
   provided the pid namespace of the procfs instance it is looked up
   under has an ancestoral relationship with the pid namespace of the
   process. If it does not 0 will be shown and no further pid namespaces
   will be listed. Tests included. (Christian Kellner)

 - If the process the pidfd references has already exited, print -1 for
   the Pid and NSpid fields in the pidfd's fdinfo file. Tests included.
   (me)

 - Add CLONE_CLEAR_SIGHAND. This lets callers clear all signal handler
   that are not SIG_DFL or SIG_IGN at process creation time. This
   originated as a feature request from glibc to improve performance and
   elimate races in their posix_spawn() implementation. Tests included.
   (me)

 - Add support for choosing a specific pid for a process with clone3().
   This is the feature which was part of the thread update for v5.4 but
   after a discussion at LPC in Lisbon we decided to delay it for one
   more cycle in order to make the interface more generic. This has now
   done. It is now possible to choose a specific pid in a whole pid
   namespaces (sub)hierarchy instead of just one pid namespace. In order
   to choose a specific pid the caller must have CAP_SYS_ADMIN in all
   owning user namespaces of the target pid namespaces. Tests included.
   (Adrian Reber)

 - Test improvements and extensions. (Andrei Vagin, me)

* tag 'threads-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  selftests/clone3: skip if clone3() is ENOSYS
  selftests/clone3: check that all pids are released on error paths
  selftests/clone3: report a correct number of fails
  selftests/clone3: flush stdout and stderr before clone3() and _exit()
  selftests: add tests for clone3() with *set_tid
  fork: extend clone3() to support setting a PID
  selftests: add tests for clone3()
  tests: test CLONE_CLEAR_SIGHAND
  clone3: add CLONE_CLEAR_SIGHAND
  pid: use pid_has_task() in pidfd_open()
  exit: use pid_has_task() in do_wait()
  pid: use pid_has_task() in __change_pid()
  test: verify fdinfo for pidfd of reaped process
  pidfd: check pid has attached task in fdinfo
  pidfd: add tests for NSpid info in fdinfo
  pidfd: add NSpid entries to fdinfo

Pull EDAC updates from Borislav Petkov:
 "A lot of changes this time around, details below.

  From the next cycle onwards, we'll switch the EDAC tree to topic
  branches (instead of a single edac-for-next branch) which should make
  the changes handling more flexible, hopefully. We'll see.

  Summary:

   - Rework error logging functions to accept a count of errors
     parameter (Hanna Hawa)

   - Part one of substantial EDAC core + ghes_edac driver cleanup
     (Robert Richter)

   - Print additional useful logging information in skx_* (Tony Luck)

   - Improve amd64_edac hw detection + cleanups (Yazen Ghannam)

   - Misc cleanups, fixes and code improvements"

* tag 'edac_for_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: (35 commits)
  EDAC/altera: Use the Altera System Manager driver
  EDAC/altera: Cleanup the ECC Manager
  EDAC/altera: Use fast register IO for S10 IRQs
  EDAC/ghes: Do not warn when incrementing refcount on 0
  EDAC/Documentation: Describe CPER module definition and DIMM ranks
  EDAC: Unify the mc_event tracepoint call
  EDAC/ghes: Remove intermediate buffer pvt->detail_location
  EDAC/ghes: Fix grain calculation
  EDAC/ghes: Use standard kernel macros for page calculations
  EDAC: Remove misleading comment in struct edac_raw_error_desc
  EDAC/mc: Reduce indentation level in edac_mc_handle_error()
  EDAC/mc: Remove needless zero string termination
  EDAC/mc: Do not BUG_ON() in edac_mc_alloc()
  EDAC: Introduce an mci_for_each_dimm() iterator
  EDAC: Remove EDAC_DIMM_OFF() macro
  EDAC: Replace EDAC_DIMM_PTR() macro with edac_get_dimm() function
  EDAC/amd64: Get rid of the ECC disabled long message
  EDAC/ghes: Fix locking and memory barrier issues
  EDAC/amd64: Check for memory before fully initializing an instance
  EDAC/amd64: Use cached data when checking for ECC
  ...

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - data abort report and injection
   - steal time support
   - GICv4 performance improvements
   - vgic ITS emulation fixes
   - simplify FWB handling
   - enable halt polling counters
   - make the emulated timer PREEMPT_RT compliant

  s390:
   - small fixes and cleanups
   - selftest improvements
   - yield improvements

  PPC:
   - add capability to tell userspace whether we can single-step the
     guest
   - improve the allocation of XIVE virtual processor IDs
   - rewrite interrupt synthesis code to deliver interrupts in virtual
     mode when appropriate.
   - minor cleanups and improvements.

  x86:
   - XSAVES support for AMD
   - more accurate report of nested guest TSC to the nested hypervisor
   - retpoline optimizations
   - support for nested 5-level page tables
   - PMU virtualization optimizations, and improved support for nested
     PMU virtualization
   - correct latching of INITs for nested virtualization
   - IOAPIC optimization
   - TSX_CTRL virtualization for more TAA happiness
   - improved allocation and flushing of SEV ASIDs
   - many bugfixes and cleanups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
  kvm: nVMX: Relax guest IA32_FEATURE_CONTROL constraints
  KVM: x86: Grab KVM's srcu lock when setting nested state
  KVM: x86: Open code shared_msr_update() in its only caller
  KVM: Fix jump label out_free_* in kvm_init()
  KVM: x86: Remove a spurious export of a static function
  KVM: x86: create mmu/ subdirectory
  KVM: nVMX: Remove unnecessary TLB flushes on L1<->L2 switches when L1 use apic-access-page
  KVM: x86: remove set but not used variable 'called'
  KVM: nVMX: Do not mark vmcs02->apic_access_page as dirty when unpinning
  KVM: vmx: use MSR_IA32_TSX_CTRL to hard-disable TSX on guest that lack it
  KVM: vmx: implement MSR_IA32_TSX_CTRL disable RTM functionality
  KVM: x86: implement MSR_IA32_TSX_CTRL effect on CPUID
  KVM: x86: do not modify masked bits of shared MSRs
  KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES
  KVM: PPC: Book3S HV: XIVE: Fix potential page leak on error path
  KVM: PPC: Book3S HV: XIVE: Free previous EQ page when setting up a new one
  KVM: nVMX: Assume TLB entries of L1 and L2 are tagged differently if L0 use EPT
  KVM: x86: Unexport kvm_vcpu_reload_apic_access_page()
  KVM: nVMX: add CR4_LA57 bit to nested CR4_FIXED1
  KVM: nVMX: Use semi-colon instead of comma for exit-handlers initialization
  ...

Pull xen updates from Juergen Gross:

 - a small series to remove the build constraint of Xen x86 MCE handling
   to 64-bit only

 - a bunch of minor cleanups

* tag 'for-linus-5.5a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: Fix Kconfig indentation
  xen/mcelog: also allow building for 32-bit kernels
  xen/mcelog: add PPIN to record when available
  xen/mcelog: drop __MC_MSR_MCGCAP
  xen/gntdev: Use select for DMA_SHARED_BUFFER
  xen: mm: make xen_mm_init static
  xen: mm: include <xen/xen-ops.h> for missing declarations

Pull MIPS updates from Paul Burton:
 "The main MIPS changes for 5.5:

   - Atomics-related code sees some rework & cleanup, most notably
     allowing Loongson LL/SC errata workarounds to be more bulletproof &
     their correctness to be checked at build time.

   - Command line setup code is simplified somewhat, resolving various
     corner cases.

   - MIPS kernels can now be built with kcov code coverage support.

   - We can now build with CONFIG_FORTIFY_SOURCE=y.

   - Miscellaneous cleanups.

  And some platform specific changes:

   - We now disable some broken TLB functionality on certain Ingenic
     systems, and JZ4780 systems gain some devicetree nodes to support
     more devices.

   - Loongson support sees a number of cleanups, and we gain initial
     support for Loongson 3A R4 systems.

   - We gain support for MediaTek MT7688-based GARDENA Smart Gateway
     systems.

   - SGI IP27 (Origin 2*) see a number of fixes, cleanups &
     simplifications.

   - SGI IP30 (Octane) systems are now supported"

* tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
  MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
  MIPS: PCI: Fix fake subdevice ID for IOC3
  MIPS: Ingenic: Disable abandoned HPTLB function.
  MIPS: PCI: remember nasid changed by set interrupt affinity
  MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter
  mips: add support for folded p4d page tables
  mips: drop __pXd_offset() macros that duplicate pXd_index() ones
  mips: fix build when "48 bits virtual memory" is enabled
  MIPS: math-emu: Reuse name array in debugfs_fpuemu()
  MIPS: allow building with kcov coverage
  MIPS: Loongson64: Drop setup_pcimap
  MIPS: Loongson2ef: Convert to early_printk_8250
  MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED
  MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline
  MIPS: Drop pmon.h
  MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage
  MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
  MIPS: Loongson: Fix return value of loongson_hwmon_init
  MIPS: add support for SGI Octane (IP30)
  MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Atari Falcon IDE platform driver conversion for module autoload

 - defconfig updates (including enablement of Amiga ICY I2C)

 - small fixes and cleanups

* tag 'm68k-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/atari: Convert Falcon IDE drivers to platform drivers
  m68k: defconfig: Enable ICY I2C and LTC2990 on Amiga
  m68k: defconfig: Update defconfigs for v5.4-rc1
  m68k: q40: Fix info-leak in rtc_ioctl
  nubus: Remove cast to void pointer

Pull RAS updates from Borislav Petkov:

 - Fully reworked thermal throttling notifications, there should be no
   more spamming of dmesg (Srinivas Pandruvada and Benjamin Berg)

 - More enablement for the Intel-compatible CPUs Zhaoxin (Tony W
   Wang-oc)

 - PPIN support for Icelake (Tony Luck)

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/therm_throt: Optimize notifications of thermal throttle
  x86/mce: Add Xeon Icelake to list of CPUs that support PPIN
  x86/mce: Lower throttling MCE messages' priority to warning
  x86/mce: Add Zhaoxin LMCE support
  x86/mce: Add Zhaoxin CMCI support
  x86/mce: Add Zhaoxin MCE support
  x86/mce/amd: Make disable_err_thresholding() static