Merge tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next

Pull support for Renesas R-car M3-W from Geert Uytterhoeven:

Add initial support for the Clock Pulse Generator and Module Standby and
Software Reset modules on the Renesas R-Car M3-W SoC:
  - Basic core clocks,
  - SCIF2 (console) module clock,
  - INTC-AP (GIC) module clock.

* tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: cpg-mssr: Add support for R-Car M3-W
  clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code
  clk: renesas: Add r8a7796 CPG Core Clock Definitions
  clk: renesas: cpg-mssr: Document r8a7796 support

This clk is critical to operation of the SoC and should never be
turned off. Furthermore, there are no consumers of this clk so
let's just delete it so things like eMMC work.
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: b1e010c0 ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The gxbb clock controller is the primary clock generation unit for the
AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several
PLLs and the usual post-dividers, muxes, dividers and leaf gates that
are fed into various IP blocks in the SoC.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Add documentations for the clock controller.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Fractional MPLLs are a superset of the existing AmLogic MPLLs. They add
in a couple of new bitfields for further dividing the clock rate to
achieve rates with fractional hertz.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

MPLLs are adjustable rate clocks derived from PLLs. On both Meson8b and
GXBB they appear to be only derived from fixed_pll.

Add support for these clock types so that they can be added to their
respective drivers.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

There are a series of peripheral and system gate clocks that fan out
from the clk81 signal. Add a helper macro to statically initialize these
gate clocks.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Break the AmLogic clock code up so that only the necessary parts are
compiled and linked. The core code is selected by both arm and arm64
builds with COMMON_CLK_AMLOGIC. The individual drivers have their own
config options as well.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

This patch creates a proper platform_driver for the meson8b clock
controller. Use of CLK_OF_DECLARE is removed, and can be added back in
later if very early registration of some clocks is required.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Remove the composite clock registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.

To preserve git bisect this patch also flips the switch and starts using
of_clk_add_hw_provider instead of the deprecated meson_clk_register_clks
method. As a byproduct clk.c can be deleted.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

This clock is undocumented and always orphaned. Get rid of it until we
have more complete clock tree documentation.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Remove the cpu clock registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.

Ninja rename a5_clk to cpu_clk to better align with cpufreq convention.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Remove the fixed factor registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Remove the pll registration function and helpers. Replace unnecessary
configuration struct with static initialization of the desired clock
type.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Remove the fixed_rate registration function and helpers from clkc.[ch].
Replace unnecessary configuration struct with static initialization of
the desired clock type.

While we're here, begin the transition to a proper platform_driver and
call of_clk_add_hw_provider with a shiny new struct clk_hw_onecell_data.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

The register offsets in the data sheet are confusing. Document them more
thoroughly.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

Merge changes from Sylwester Nawrocki for samsung clk drivers:

 - a fix for exynos7 to prevent gating some critical CMU clocks,
 - addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
 - additions for exynos5410 SoC required for Odroid XU board support,
 - register accessors fixes for kernels built for big endian operation
   (mostly exynos4 SoCs),
 - Exynos5433 clock definitions fixes required for suspend to RAM and
   the audio subsystem operation,
 - many cleanups changing attributes of the clock initializer data

* tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung: (41 commits)
  clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag to PCIE device
  clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flags to avoid hang during S2R
  clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag for AUD UART
  clk: samsung: exynos4: fixup reg access on be
  clk: samsung: fixup endian in pll clk
  clk: samsung: exynos5410: Add WDT, ACLK266 and SSS clocks
  clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
  clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
  clk: samsung: exynos5433: prepare for adding CPU clocks
  clk: samsung: Suppress unbinding to prevent theoretical attacks
  clk: samsung: exynos5420: Set ID for aclk333 gate clock
  clk: samsung: exynos5410: Add TMU clock
  clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  clk: samsung: exynos3250: Move PLL rates data to init section
  clk: samsung: Fully constify mux parent names
  clk: samsung: exynos5250: Move sleep init function to init section
  clk: samsung: exynos5420: Move sleep init function and PLL data to init section
  clk: samsung: exynos5433: Move PLL rates data to init section
  clk: samsung: exynos5433: Constify all clock initializers
  ...

Correct comments for __clk_determine_rate.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

PLL clock on WM8650 is calculated in the following way:

M * parent [O1] => / P [O2] => / D [O3]

Where O2 is 600MHz >= (M * parent) / P >= 300MHz.

Current algorithm does not met this requirement, so that the
function may return rates which are not supported by the hardware.

This patch fixes the algorithm and simplifies the code, reducing
the calculation time by ~10000 times (according to usermode app) by
removing the nested loops.
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

This fixes some false positive warnings we get with older compiler
versions:

clk-vt8500.c: In function ‘wm8650_find_pll_bits’:
clk-vt8500.c:430:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:429:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:428:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8750_find_pll_bits’:
clk-vt8500.c:509:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:508:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:507:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8850_find_pll_bits’:
clk-vt8500.c:560:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:559:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:558:14: ‘best_mul’ may be used uninitialized in this function

As the local variables are only use for temporaries, we can just
as well assign the final values directly, which also makes the
code slightly shorter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Roman Volkov <rvolkov@v1ros.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Fix the warning from missing "clk.h" include which
defines hi6220_register_clkdiv() function.

drivers/clk/hisilicon/clkdivider-hi6220.c:102:12: warning: symbol 'hi6220_register_clkdiv' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

Fix the implicit declaration of iproc_armpll_setup() by
including clk-iproc.h which defines it. Fixes the warning:

drivers/clk/bcm/clk-iproc-armpll.c:242:13: warning: symbol 'iproc_armpll_setup' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

The of_sama5d2_clk_generated_setup() is not exported outside
of the driver, so make it static to fix the warning about it
being not static:

drivers/clk/at91/clk-generated.c:270:13: warning: symbol 'of_sama5d2_clk_generated_setup' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

* clk-fixes:
  clk: Fix return value check in oxnas_stdclk_probe()
  clk: rockchip: release io resource when failing to init clk on rk3399
  clk: rockchip: fix cpuclk registration error handling
  clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
  clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
  clk: rockchip: mark rk3399 GIC clocks as critical
  clk: rockchip: initialize flags of clk_init_data in mmc-phase clock

Merge tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes

A bunch of fixes. Some for the newly added rk3399 clock tree, some
concerning error handling and initialization and a revert of the
mmc-phase clock initialization, as this could conflict with the
bootloader setting of this clock and a real solution to initing
the phase correctly from dw_mmc went in as fix for 4.7 through
the mmc tree.

* tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  clk: rockchip: release io resource when failing to init clk on rk3399
  clk: rockchip: fix cpuclk registration error handling
  clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
  clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
  clk: rockchip: mark rk3399 GIC clocks as critical
  clk: rockchip: initialize flags of clk_init_data in mmc-phase clock

In case of error, the function syscon_node_to_regmap() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: 0bbd72b4 ("clk: Add Oxford Semiconductor OXNAS Standard Clocks")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

In the current multiplier base clock implementation, if the
CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the
multiplier computed remains within the boundaries of our clock.

This means that if the clock we want to reach is below the parent rate,
or if the multiplier is above the maximum that we can reach, we will end up
with a completely bogus one that the clock cannot achieve.

Fixes: f2e0a532 ("clk: Add a basic multiplier clock")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com

This commit fixes the RCU use-from-idle bug corresponding the following
splat:

> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1127 Not tainted
> -------------------------------
> include/trace/events/clk.h:45 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 2 locks held by swapper/0/0:
>  #0:  (&oh->hwmod_key#30){......}, at: [<c0121afc>] omap_hwmod_enable+0x18/0x44
>  #1:  (enable_lock){......}, at: [<c0630684>] clk_enable_lock+0x18/0x124
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1127
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c06315c0>] (clk_core_enable+0x1e0/0x36c)
> [<c06315c0>] (clk_core_enable) from [<c0632298>] (clk_enable+0x1c/0x38)
> [<c0632298>] (clk_enable) from [<c01204e0>] (_enable_clocks+0x18/0x7c)
> [<c01204e0>] (_enable_clocks) from [<c012137c>] (_enable+0x114/0x2ec)
> [<c012137c>] (_enable) from [<c0121b08>] (omap_hwmod_enable+0x24/0x44)
> [<c0121b08>] (omap_hwmod_enable) from [<c0122ad0>] (omap_device_enable+0x3c/0x90)
> [<c0122ad0>] (omap_device_enable) from [<c0122b34>] (_od_runtime_resume+0x10/0x38)
> [<c0122b34>] (_od_runtime_resume) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> [<c052cc54>] (rpm_callback) from [<c052df7c>] (rpm_resume+0x3d0/0x6f0)
> [<c052df7c>] (rpm_resume) from [<c052e2e8>] (__pm_runtime_resume+0x4c/0x64)
> [<c052e2e8>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68)
> [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601888>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601888>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-clk@vger.kernel.org>

This commit adds an _rcuidle suffix to a pair of trace events to
prevent the following splat:

> ===============================
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1114 Not tainted
> -------------------------------
> include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 2 locks held by swapper/0/0:
>  #0:  (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
>  #1:  (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
> [<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
> [<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
> [<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
> [<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
> [<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
> [<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> [<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
> [<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
> [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244)
> [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: <linux-clk@vger.kernel.org>

This patch adds the CLK_IGNORE_UNUSED flag for PCI Express's clocks
which need to remain enabled. The 'pcie' gate clock definition is
also added.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[s.nawrocki@samsung.com: edited the patch's summary]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Some clocks are required to be unmasked during suspend to RAM. Otherwise
the PMU will stuck and the power down sequence will never be completed.
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[s.nawrocki@samsung.com: edited the patch's summary]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

This patch adds CLK_IGNORE_UNUSED flag for sclk_aud_uart gate
clock for uart3 operation.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[s.nawrocki@samsung.com: edited the patch's summary]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Use the byte-order aware big endian accessors, allowing for kernels
running under big-endian.
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Fix the clk endian access code to deal with kernels built for big endian
operation.
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

Initial support for R-Car M3-W (r8a7796), including basic core clocks,
and SCIF2 (console) and INTC-AP (GIC) module clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>

Extract the code to support parts common to all members of the R-Car
Gen3 SoC family into a separate file, to ease sharing among SoC-specific
drivers.

Note that while the cpg_pll_configs[] arrays and the selection of the
config based on the MODE bits are identical on R-Car H3 and R-Car M3-W,
they are not common, and may be different on other R-Car Gen3 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>

Add all R-Car M3-W Clock Pulse Generator Core Clock Outputs, as listed
in Table 8.2b ("List of Clocks [R-Car M3-W]") of the R-Car Gen3
datasheet (rev. 0.51 + Errata for Rev051 Mar 31 2016).

Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, and SSPSRC) are
not included, as they are used as internal clock sources only, and never
referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Simon Horman <horms+renesas@verge.net.au>