- 15 Jun, 2020 1 commit
-
-
Vitaly Kuznetsov authored
KVM now supports using interrupt for 'page ready' APF event delivery and legacy mechanism was deprecated. Switch KVM guests to the new one. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200525144125.143875-9-vkuznets@redhat.com> [Use HYPERVISOR_CALLBACK_VECTOR instead of a separate vector. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 11 Jun, 2020 11 commits
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for Linux 5.8, take #1 * 32bit VM fixes: - Fix embarassing mapping issue between AArch32 CSSELR and AArch64 ACTLR - Add ACTLR2 support for AArch32 - Get rid of the useless ACTLR_EL1 save/restore - Fix CP14/15 accesses for AArch32 guests on BE hosts - Ensure that we don't loose any state when injecting a 32bit exception when running on a VHE host * 64bit VM fixes: - Fix PtrAuth host saving happening in preemptible contexts - Optimize PtrAuth lazy enable - Drop vcpu to cpu context pointer - Fix sparse warnings for HYP per-CPU accesses
-
Paolo Bonzini authored
__kvm_set_memory_region does not use the hva at all, so trying to catch use-after-delete is pointless and, worse, it fails access_ok now that we apply it to all memslots including private kernel ones. This fixes an AVIC regression. Fixes: 09d952c9 ("KVM: check userspace_addr for all memslots") Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
It was reported that older GCCs compile smm_test in a way that breaks it completely: kvm_exit: reason EXIT_CPUID rip 0x4014db info 0 0 func 7ffffffd idx 830 rax 0 rbx 0 rcx 0 rdx 0, cpuid entry not found ... kvm_exit: reason EXIT_MSR rip 0x40abd9 info 0 0 kvm_msr: msr_read 487 = 0x0 (#GP) ... Note, '7ffffffd' was supposed to be '80000001' as we're checking for SVM. Dropping '-O2' from compiler flags help. Turns out, asm block in sync_with_host() is wrong. We us 'in 0xe, %%al' instruction to sync with the host and in 'AL' register we actually pass the parameter (stage) but after sync 'AL' gets written to but GCC thinks the value is still there and uses it to compute 'EAX' for 'cpuid'. smm_test can't fully use standard ucall() framework as we need to write a very simple SMI handler there. Fix the immediate issue by making RAX input/output operand. While on it, make sync_with_host() static inline. Reported-by:
Marcelo Bandeira Condotta <mcondotta@redhat.com> Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Vitaly Kuznetsov authored
'Page not present' event may or may not get injected depending on guest's state. If the event wasn't injected, there is no need to inject the corresponding 'page ready' event as the guest may get confused. E.g. Linux thinks that the corresponding 'page not present' event wasn't delivered *yet* and allocates a 'dummy entry' for it. This entry is never freed. Note, 'wakeup all' events have no corresponding 'page not present' event and always get injected. s390 seems to always be able to inject 'page not present', the change is effectively a nop. Suggested-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
schedule_work() returns 'false' only when the work is already on the queue and this can't happen as kvm_setup_async_pf() always allocates a new one. Also, to avoid potential race, it makes sense to to schedule_work() at the very end after we've added it to the queue. While on it, do some minor cleanup. gfn_to_pfn_async() mentioned in a comment does not currently exist and, moreover, we can check kvm_is_error_hva() at the very beginning, before we try to allocate work so 'retry_sync' label can go away completely. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Colin Ian King authored
The pointer s is being assigned a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Message-Id: <20200609233121.1118683-1-colin.king@canonical.com> Fixes: 7837699f ("KVM: In kernel PIT model") Signed-off-by:
-
Felipe Franciosi authored
When userspace configures KVM_GUESTDBG_SINGLESTEP, KVM will manage the presence of X86_EFLAGS_TF via kvm_set/get_rflags on vcpus. The actual rflag bit is therefore hidden from callers. That includes init_emulate_ctxt() which uses the value returned from kvm_get_flags() to set ctxt->tf. As a result, x86_emulate_instruction() will skip a single step, leaving singlestep_rip stale and not returning to userspace. This resolves the issue by observing the vcpu guest_debug configuration alongside ctxt->tf in x86_emulate_instruction(), performing the single step if set. Cc: stable@vger.kernel.org Signed-off-by:
Felipe Franciosi <felipe@nutanix.com> Message-Id: <20200519081048.8204-1-felipe@nutanix.com> Signed-off-by:
-
Vitaly Kuznetsov authored
KVM_CAP_HYPERV_ENLIGHTENED_VMCS will be reported as supported even when nested VMX is not, fix evmcs_test/hyperv_cpuid tests to check for both. Signed-off-by:
-
Vitaly Kuznetsov authored
state_test/smm_test use KVM_CAP_NESTED_STATE check as an indicator for nested VMX/SVM presence and this is incorrect. Check for the required features dirrectly. Signed-off-by:
-
Paolo Bonzini authored
Using a topic branch so that stable branches can simply cherry-pick the patch. Reviewed-by:
Oliver Upton <oupton@google.com> Signed-off-by:
-
Sean Christopherson authored
Consult only the basic exit reason, i.e. bits 15:0 of vmcs.EXIT_REASON, when determining whether a nested VM-Exit should be reflected into L1 or handled by KVM in L0. For better or worse, the switch statement in nested_vmx_exit_reflected() currently defaults to "true", i.e. reflects any nested VM-Exit without dedicated logic. Because the case statements only contain the basic exit reason, any VM-Exit with modifier bits set will be reflected to L1, even if KVM intended to handle it in L0. Practically speaking, this only affects EXIT_REASON_MCE_DURING_VMENTRY, i.e. a #MC that occurs on nested VM-Enter would be incorrectly routed to L1, as "failed VM-Entry" is the only modifier that KVM can currently encounter. The SMM modifiers will never be generated as KVM doesn't support/employ a SMI Transfer Monitor. Ditto for "exit from enclave", as KVM doesn't yet support virtualizing SGX, i.e. it's impossible to enter an enclave in a KVM guest (L1 or L2). Fixes: 644d711a ("KVM: nVMX: Deciding if L0 or L1 should handle an L2 exit") Cc: Jim Mattson <jmattson@google.com> Cc: Xiaoyao Li <xiaoyao.li@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
-
- 10 Jun, 2020 4 commits
-
-
Marc Zyngier authored
Signed-off-by:Marc Zyngier <maz@kernel.org>
-
Marc Zyngier authored
Recent refactoring of the arm64 code make it awkward to have hyp_symbol_addr() in kvm_mmu.h. Instead, move it next to its main user, which is __hyp_this_cpu_ptr(). Signed-off-by: -
Marc Zyngier authored
On a VHE system, the EL1 state is left in the CPU most of the time, and only syncronized back to memory when vcpu_put() is called (most of the time on preemption). Which means that when injecting an exception, we'd better have a way to either: (1) write directly to the EL1 sysregs (2) synchronize the state back to memory, and do the changes there For an AArch64, we already do (1), so we are safe. Unfortunately, doing the same thing for AArch32 would be pretty invasive. Instead, we can easily implement (2) by calling the put/load architectural backends, and keep preemption disabled. We can then reload the state back into EL1. Cc: stable@vger.kernel.org Reported-by:
James Morse <james.morse@arm.com> Signed-off-by:
-
Marc Zyngier authored
AArch32 CP1x registers are overlayed on their AArch64 counterparts in the vcpu struct. This leads to an interesting problem as they are stored in their CPU-local format, and thus a CP1x register doesn't "hit" the lower 32bit portion of the AArch64 register on a BE host. To workaround this unfortunate situation, introduce a bias trick in the vcpu_cp1x() accessors which picks the correct half of the 64bit register. Cc: stable@vger.kernel.org Reported-by:
-
- 09 Jun, 2020 9 commits
-
-
Marc Zyngier authored
For very long, we have kept this pointer back to the per-cpu host state, despite having working per-cpu accessors at EL2 for some time now. Recent investigations have shown that this pointer is easy to abuse in preemptible context, which is a sure sign that it would better be gone. Not to mention that a per-cpu pointer is faster to access at all times. Reported-by:
Andrew Scull <ascull@google.com> Acked-by: Mark Rutland <mark.rutland@arm.com Reviewed-by:
-
Marc Zyngier authored
Sparse complains that __hyp_this_cpu_ptr() returns something that is flagged noderef and not in the correct address space (both being the result of the __percpu annotation). Pretend that __hyp_this_cpu_ptr() knows what it is doing by forcefully casting the pointer with __kernel __force. Signed-off-by: -
Marc Zyngier authored
The current way we deal with PtrAuth is a bit heavy handed: - We forcefully save the host's keys on each vcpu_load() - Handling the PtrAuth trap forces us to go all the way back to the exit handling code to just set the HCR bits Overall, this is pretty cumbersome. A better approach would be to handle it the same way we deal with the FPSIMD registers: - On vcpu_load() disable PtrAuth for the guest - On first use, save the host's keys, enable PtrAuth in the guest Crucially, this can happen as a fixup, which is done very early on exit. We can then reenter the guest immediately without leaving the hypervisor role. Another thing is that it simplify the rest of the host handling: exiting all the way to the host means that the only possible outcome for this trap is to inject an UNDEF. Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Sean Christopherson authored
Make x86_fpu_cache static now that FPU allocation and destruction is handled entirely by common x86 code. Signed-off-by:
-
Sean Christopherson authored
Explicitly set the VA width to 48 bits for the x86_64-only PXXV48_4K VM mode instead of asserting the guest VA width is 48 bits. The fact that KVM supports 5-level paging is irrelevant unless the selftests opt-in to 5-level paging by setting CR4.LA57 for the guest. The overzealous assert prevents running the selftests on a kernel with 5-level paging enabled. Incorporate LA57 into the assert instead of removing the assert entirely as a sanity check of KVM's CPUID output. Fixes: 567a9f1e ("KVM: selftests: Introduce VM_MODE_PXXV48_4K") Reported-by:
Sergio Perez Gonzalez <sergio.perez.gonzalez@intel.com> Cc: Adriana Cervantes Jimenez <adriana.cervantes.jimenez@intel.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
-
Marc Zyngier authored
When using the PtrAuth feature in a guest, we need to save the host's keys before allowing the guest to program them. For that, we dump them in a per-CPU data structure (the so called host context). But both call sites that do this are in preemptible context, which may end up in disaster should the vcpu thread get preempted before reentering the guest. Instead, save the keys eagerly on each vcpu_load(). This has an increased overhead, but is at least safe. Cc: stable@vger.kernel.org Reviewed-by:
-
James Morse authored
KVM sets HCR_EL2.TACR via HCR_GUEST_FLAGS. This means ACTLR* accesses from the guest are always trapped, and always return the value in the sys_regs array. The guest can't change the value of these registers, so we are save restoring the reset value, which came from the host. Stop save/restoring this register. Keep the storage for this register in sys_regs[] as this is how the value is exposed to user-space, removing it would break migration. Signed-off-by:
-
James Morse authored
ACTLR_EL1 is a 64bit register while the 32bit ACTLR is obviously 32bit. For 32bit software, the extra bits are accessible via ACTLR2... which KVM doesn't emulate. Suggested-by:
-
James Morse authored
aarch32 has pairs of registers to access the high and low parts of 64bit registers. KVM has a union of 64bit sys_regs[] and 32bit copro[]. The 32bit accessors read the high or low part of the 64bit sys_reg[] value through the union. Both sys_reg_descs[] and cp15_regs[] list access_csselr() as the accessor for CSSELR{,_EL1}. access_csselr() is only aware of the 64bit sys_regs[], and expects r->reg to be 'CSSELR_EL1' in the enum, index 2 of the 64bit array. cp15_regs[] uses the 32bit copro[] alias of sys_regs[]. Here CSSELR is c0_CSSELR which is the same location in sys_reg[]. r->reg is 'c0_CSSELR', index 4 in the 32bit array. access_csselr() uses the 32bit r->reg value to access the 64bit array, so reads and write the wrong value. sys_regs[4], is ACTLR_EL1, which is subsequently save/restored when we enter the guest. ACTLR_EL1 is supposed to be read-only for the guest. This register only affects execution at EL1, and the host's value is restored before we return to host EL1. Convert the 32bit register index back to the 64bit version. Suggested-by:
-
- 08 Jun, 2020 6 commits
-
-
Eiichi Tsukata authored
Commit b1394e74 ("KVM: x86: fix APIC page invalidation") tried to fix inappropriate APIC page invalidation by re-introducing arch specific kvm_arch_mmu_notifier_invalidate_range() and calling it from kvm_mmu_notifier_invalidate_range_start. However, the patch left a possible race where the VMCS APIC address cache is updated *before* it is unmapped: (Invalidator) kvm_mmu_notifier_invalidate_range_start() (Invalidator) kvm_make_all_cpus_request(kvm, KVM_REQ_APIC_PAGE_RELOAD) (KVM VCPU) vcpu_enter_guest() (KVM VCPU) kvm_vcpu_reload_apic_access_page() (Invalidator) actually unmap page Because of the above race, there can be a mismatch between the host physical address stored in the APIC_ACCESS_PAGE VMCS field and the host physical address stored in the EPT entry for the APIC GPA (0xfee0000). When this happens, the processor will not trap APIC accesses, and will instead show the raw contents of the APIC-access page. Because Windows OS periodically checks for unexpected modifications to the LAPIC register, this will show up as a BSOD crash with BugCheck CRITICAL_STRUCTURE_CORRUPTION (109) we are currently seeing in https://bugzilla.redhat.com/show_bug.cgi?id=1751017. The root cause of the issue is that kvm_arch_mmu_notifier_invalidate_range() cannot guarantee that no additional references are taken to the pages in the range before kvm_mmu_notifier_invalidate_range_end(). Fortunately, this case is supported by the MMU notifier API, as documented in include/linux/mmu_notifier.h: * If the subsystem * can't guarantee that no additional references are taken to * the pages in the range, it has to implement the * invalidate_range() notifier to remove any references taken * after invalidate_range_start(). The fix therefore is to reload the APIC-access page field in the VMCS from kvm_mmu_notifier_invalidate_range() instead of ..._range_start(). Cc: stable@vger.kernel.org Fixes: b1394e74 ("KVM: x86: fix APIC page invalidation") Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=197951Signed-off-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Message-Id: <20200606042627.61070-1-eiichi.tsukata@nutanix.com> Signed-off-by:
-
Paolo Bonzini authored
is_intercept takes an INTERCEPT_* constant, not SVM_EXIT_*; because of this, the compiler was removing the body of the conditionals, as if is_intercept returned 0. This unveils a latent bug: when clearing the VINTR intercept, int_ctl must also be changed in the L1 VMCB (svm->nested.hsave), just like the intercept itself is also changed in the L1 VMCB. Otherwise V_IRQ remains set and, due to the VINTR intercept being clear, we get a spurious injection of a vector 0 interrupt on the next L2->L1 vmexit. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Vitaly Kuznetsov authored
GCC10 fails to build vmx_preemption_timer_test: gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 -fno-stack-protector -fno-PIE -I../../../../tools/include -I../../../../tools/arch/x86/include -I../../../../usr/include/ -Iinclude -Ix86_64 -Iinclude/x86_64 -I.. -pthread -no-pie x86_64/evmcs_test.c ./linux/tools/testing/selftests/kselftest_harness.h ./linux/tools/testing/selftests/kselftest.h ./linux/tools/testing/selftests/kvm/libkvm.a -o ./linux/tools/testing/selftests/kvm/x86_64/evmcs_test /usr/bin/ld: ./linux/tools/testing/selftests/kvm/libkvm.a(vmx.o): ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:603: multiple definition of `ctrl_exit_rev'; /tmp/ccMQpvNt.o: ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:603: first defined here /usr/bin/ld: ./linux/tools/testing/selftests/kvm/libkvm.a(vmx.o): ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:602: multiple definition of `ctrl_pin_rev'; /tmp/ccMQpvNt.o: ./linux/tools/testing/selftests/kvm/include/x86_64/vmx.h:602: first defined here ... ctrl_exit_rev/ctrl_pin_rev/basic variables are only used in vmx_preemption_timer_test.c, just move them there. Fixes: 8d7fbf01 ("KVM: selftests: VMX preemption timer migration test") Reported-by:
-
Vitaly Kuznetsov authored
Add x86_64/debug_regs to .gitignore. Reported-by:
-
Vitaly Kuznetsov authored
handle_vmptrst()/handle_vmread() stopped injecting #PF unconditionally and switched to nested_vmx_handle_memory_failure() which just kills the guest with KVM_EXIT_INTERNAL_ERROR in case of MMIO access, zeroing 'exception' in kvm_write_guest_virt_system() is not needed anymore. This reverts commit 541ab2ae. Signed-off-by:
-
Vitaly Kuznetsov authored
Syzbot reports the following issue: WARNING: CPU: 0 PID: 6819 at arch/x86/kvm/x86.c:618 kvm_inject_emulated_page_fault+0x210/0x290 arch/x86/kvm/x86.c:618 ... Call Trace: ... RIP: 0010:kvm_inject_emulated_page_fault+0x210/0x290 arch/x86/kvm/x86.c:618 ... nested_vmx_get_vmptr+0x1f9/0x2a0 arch/x86/kvm/vmx/nested.c:4638 handle_vmon arch/x86/kvm/vmx/nested.c:4767 [inline] handle_vmon+0x168/0x3a0 arch/x86/kvm/vmx/nested.c:4728 vmx_handle_exit+0x29c/0x1260 arch/x86/kvm/vmx/vmx.c:6067 'exception' we're trying to inject with kvm_inject_emulated_page_fault() comes from: nested_vmx_get_vmptr() kvm_read_guest_virt() kvm_read_guest_virt_helper() vcpu->arch.walk_mmu->gva_to_gpa() but it is only set when GVA to GPA conversion fails. In case it doesn't but we still fail kvm_vcpu_read_guest_page(), X86EMUL_IO_NEEDED is returned and nested_vmx_get_vmptr() calls kvm_inject_emulated_page_fault() with zeroed 'exception'. This happen when the argument is MMIO. Paolo also noticed that nested_vmx_get_vmptr() is not the only place in KVM code where kvm_read/write_guest_virt*() return result is mishandled. VMX instructions along with INVPCID have the same issue. This was already noticed before, e.g. see commit 541ab2ae ("KVM: x86: work around leak of uninitialized stack contents") but was never fully fixed. KVM could've handled the request correctly by going to userspace and performing I/O but there doesn't seem to be a good need for such requests in the first place. Introduce vmx_handle_memory_failure() as an interim solution. Note, nested_vmx_get_vmptr() now has three possible outcomes: OK, PF, KVM_EXIT_INTERNAL_ERROR and callers need to know if userspace exit is needed (for KVM_EXIT_INTERNAL_ERROR) in case of failure. We don't seem to have a good enum describing this tristate, just add "int *ret" to nested_vmx_get_vmptr() interface to pass the information. Reported-by: syzbot+2a7156e11dc199bdbd8a@syzkaller.appspotmail.com Suggested-by:
-
- 05 Jun, 2020 2 commits
-
-
Paolo Bonzini authored
Instructions starting with 0f18 up to 0f1f are reserved nops, except those that were assigned to MPX. These include the endbr markers used by CET. List them correctly in the opcode table. Signed-off-by: -
Vitaly Kuznetsov authored
Marcelo reports that kvm selftests fail to build with "make ARCH=x86_64": gcc -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 -fno-stack-protector -fno-PIE -I../../../../tools/include -I../../../../tools/arch/x86_64/include -I../../../../usr/include/ -Iinclude -Ilib -Iinclude/x86_64 -I.. -c lib/kvm_util.c -o /var/tmp/20200604202744-bin/lib/kvm_util.o In file included from lib/kvm_util.c:11: include/x86_64/processor.h:14:10: fatal error: asm/msr-index.h: No such file or directory #include <asm/msr-index.h> ^~~~~~~~~~~~~~~~~ compilation terminated. "make ARCH=x86", however, works. The problem is that arch specific headers for x86_64 live in 'tools/arch/x86/include', not in 'tools/arch/x86_64/include'. Fixes: 66d69e08 ("selftests: fix kvm relocatable native/cross builds and installs") Reported-by:
-
- 04 Jun, 2020 7 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-next-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM update for 5.8 - Updates and bug fixes for secure guest support - Other minor bug fixes and cleanups.
-
Anthony Yznaga authored
Consolidate the code and correct the comments to show that the actions taken to update existing mappings to disable or enable dirty logging are not necessary when creating, moving, or deleting a memslot. Signed-off-by:
Anthony Yznaga <anthony.yznaga@oracle.com> Message-Id: <1591128450-11977-4-git-send-email-anthony.yznaga@oracle.com> Signed-off-by:
-
Anthony Yznaga authored
On large memory guests it has been observed that creating a memslot for a very large range can take noticeable amount of time. Investigation showed that the time is spent walking the rmaps to update existing sptes to remove write access or set/clear dirty bits to support dirty logging. These rmap walks are unnecessary when creating or moving a memslot. A newly created memslot will not have any existing mappings, and the existing mappings of a moved memslot will have been invalidated and flushed. Any mappings established once the new/moved memslot becomes visible will be set using the properties of the new slot. Signed-off-by:
-
Anthony Yznaga authored
There's no write access to remove. An existing memslot cannot be updated to set or clear KVM_MEM_READONLY, and any mappings established in a newly created or moved read-only memslot will already be read-only. Signed-off-by:
-
Denis Efremov authored
Replace opencoded alloc and copy with vmemdup_user(). Signed-off-by:
Denis Efremov <efremov@linux.com> Message-Id: <20200603101131.2107303-1-efremov@linux.com> Signed-off-by:
-
Sean Christopherson authored
Remove KVM_DEBUG_FS, which can easily be misconstrued as controlling KVM-as-a-host. The sole user of CONFIG_KVM_DEBUG_FS was removed by commit cfd8983f ("x86, locking/spinlocks: Remove ticket (spin)lock implementation"). Signed-off-by:
-
Huacai Chen authored
This patch enable KVM support for Loongson-3 by selecting HAVE_KVM, but only enable KVM/VZ on Loongson-3A R4+ (because VZ of early processors are incomplete). Besides, Loongson-3 support SMP guests, so we clear the linked load bit of LLAddr in kvm_vz_vcpu_load() if the guest has more than one VCPUs. Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by:
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Co-developed-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <1590220602-3547-15-git-send-email-chenhc@lemote.com> Signed-off-by:
-
