- 01 Jun, 2012 38 commits
-
-
Konstantin Khlebnikov authored
Currently smaps reports migration entries as "swap", as result "swap" can appears in shared mapping. This patch converts migration entries into pages and handles them as usual. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Konstantin Khlebnikov authored
This is an implementation of Andrew's proposal to extend the pagemap file bits to report what is missing about tasks' working set. The problem with the working set detection is multilateral. In the criu (checkpoint/restore) project we dump the tasks' memory into image files and to do it properly we need to detect which pages inside mappings are really in use. The mincore syscall I though could help with this did not. First, it doesn't report swapped pages, thus we cannot find out which parts of anonymous mappings to dump. Next, it does report pages from page cache as present even if they are not mapped, and it doesn't make that has not been cow-ed. Note, that issue with swap pages is critical -- we must dump swap pages to image file. But the issues with file pages are optimization -- we can take all file pages to image, this would be correct, but if we know that a page is not mapped or not cow-ed, we can remove them from dump file. The dump would still be self-consistent, though significantly smaller in size (up to 10 times smaller on real apps). Andrew noticed, that the proc pagemap file solved 2 of 3 above issues -- it reports whether a page is present or swapped and it doesn't report not mapped page cache pages. But, it doesn't distinguish cow-ed file pages from not cow-ed. I would like to make the last unused bit in this file to report whether the page mapped into respective pte is PageAnon or not. [comment stolen from Pavel Emelyanov's v1 patch] Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Jan Engelhardt authored
- use int fpr priority and nice, since task_nice()/task_prio() return that - field 24: get_mm_rss() returns unsigned long Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
Alexey Dobriyan authored
Pass "fd" directly, not via pointer -- one less memory read. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Alexey Dobriyan authored
rcu_read_lock()/rcu_read_unlock() is nop for TINY_RCU, but is not a nop for, say, PREEMPT_RCU. proc_fill_cache() is called without RCU lock, there is no need to lock/unlock on error path, simply jump out of the loop. Signed-off-by:
-
Cong Wang authored
mm_access() handles this much better, and avoids some race conditions. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Cong Wang authored
mm_for_maps() is a simple wrapper for mm_access(), and the name is misleading, so just remove it and use mm_access() directly. Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Cong Wang authored
Similar to e268337d ("proc: clean up and fix /proc/<pid>/mem handling"), move the check of permission to open(), this will simplify read() code. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
-
Tim Bird authored
In embedded systems, sometimes the same program (busybox) is the cause of multiple warnings. Outputting the pid with the program name in the warning printk helps distinguish which instances of a program are using the stack most. This is a small patch, but useful. Signed-off-by:
Tim Bird <tim.bird@am.sony.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
Commit 8f92054e ("CRED: Fix __task_cred()'s lockdep check and banner comment"): add the following validation condition: task->exit_state >= 0 to permit the access if the target task is dead and therefore unable to change its own credentials. OK, but afaics currently this can only help wait_task_zombie() which calls __task_cred() without rcu lock. Remove this validation and change wait_task_zombie() to use task_uid() instead. This means we do rcu_read_lock() only to shut up the lockdep, but we already do the same in, say, wait_task_stopped(). task_is_dead() should die, task->exit_state != 0 means that this task has passed exit_notify(), only do_wait-like code paths should use this. Unfortunately, we can't kill task_is_dead() right now, it has already acquired buggy users in drivers/staging. The fix already exists. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
David Howells <dhowells@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Randy Dunlap authored
Warning(kernel/kmod.c:419): No description found for parameter 'depth' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Boaz Harrosh authored
If we move call_usermodehelper_fns() to kmod.c file and EXPORT_SYMBOL it we can avoid exporting all it's helper functions: call_usermodehelper_setup call_usermodehelper_setfns call_usermodehelper_exec And make all of them static to kmod.c Since the optimizer will see all these as a single call site it will inline them inside call_usermodehelper_fns(). So we loose the call to _fns but gain 3 calls to the helpers. (Not that it matters) Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
-
Boaz Harrosh authored
Both kernel/sys.c && security/keys/request_key.c where inlining the exact same code as call_usermodehelper_fns(); So simply convert these sites to directly use call_usermodehelper_fns(). Signed-off-by:
-
Boaz Harrosh authored
call_usermodehelper_freeinfo() is not used outside of kmod.c. So unexport it, and make it static to kmod.c Signed-off-by:
-
Namjae Jeon authored
If an application tries to lookup (opendir/readdir/stat) 5000 files on a fatfs USB device and the device is unplugged, many message occur, shown below. This makes the application slow. So use the new fat_msg_ratelimit() decrease the messaging rate. #> ./file_lookup_testcase ./files_directory/ usb 2-1.4: USB disconnect, device number 4 FAT-fs (sda1): FAT read failed (blocknr 2631) FAT-fs (sda1): Directory bread(block 396816) failed FAT-fs (sda1): Directory bread(block 396817) failed FAT-fs (sda1): Directory bread(block 396818) failed FAT-fs (sda1): Directory bread(block 396819) failed FAT-fs (sda1): Directory bread(block 396820) failed FAT-fs (sda1): Directory bread(block 396821) failed FAT-fs (sda1): Directory bread(block 396822) failed FAT-fs (sda1): Directory bread(block 396823) failed FAT-fs (sda1): Directory bread(block 406824) failed FAT-fs (sda1): Directory bread(block 406825) failed FAT-fs (sda1): Directory bread(block 406826) failed FAT-fs (sda1): Directory bread(block 406827) failed FAT-fs (sda1): Directory bread(block 406828) failed FAT-fs (sda1): Directory bread(block 406829) failed FAT-fs (sda1): Directory bread(block 406830) failed FAT-fs (sda1): Directory bread(block 406831) failed FAT-fs (sda1): Directory bread(block 417696) failed FAT-fs (sda1): Directory bread(block 417697) failed FAT-fs (sda1): Directory bread(block 417698) failed FAT-fs (sda1): Directory bread(block 417699) failed FAT-fs (sda1): Directory bread(block 417700) failed FAT-fs (sda1): Directory bread(block 417701) failed FAT-fs (sda1): Directory bread(block 417702) failed FAT-fs (sda1): Directory bread(block 417703) failed FAT-fs (sda1): FAT read failed (blocknr 2631) FAT-fs (sda1): Directory bread(block 396816) failed FAT-fs (sda1): Directory bread(block 396817) failed FAT-fs (sda1): Directory bread(block 396818) failed FAT-fs (sda1): Directory bread(block 396819) failed FAT-fs (sda1): Directory bread(block 396820) failed FAT-fs (sda1): Directory bread(block 396821) failed Signed-off-by:
Namjae Jeon <linkinjeon@gmail.com> Signed-off-by:
Amit Sahrawat <amit.sahrawat83@gmail.com> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Namjae Jeon authored
Add a fat_msg_ratelimit() to limit the message generation rate. Signed-off-by:
-
Artem Bityutskiy authored
Currently FAT file-system maps the VFS "superblock" abstraction to the FSINFO block. The FSINFO block contains non-essential data about the amount of free clusters and the next free cluster. FAT file-system can always find out this information by scanning the FAT table, but having it in the FSINFO block may speed things up sometimes. So FAT file-system relies on the VFS superblock write-out services to make sure the FSINFO block is written out to the media from time to time. The whole "superblock write-out" VFS infrastructure is served by the 'sync_supers()' kernel thread, which wakes up every 5 (by default) seconds and writes out all dirty superblock using the '->write_super()' call-back. But the problem with this thread is that it wastes power by waking up the system every 5 seconds no matter what. So we want to kill it completely and thus, we need to make file-systems to stop using the '->write_super' VFS service, and then remove it together with the kernel thread. This patch switches the FAT FSINFO block management from '->write_super()'/'->s_dirt' to 'fsinfo_inode'/'->write_inode'. Now, instead of setting the 's_dirt' flag, we just mark the special 'fsinfo_inode' inode as dirty and let VFS invoke the '->write_inode' call-back when needed, where we write-out the FSINFO block. This patch also makes sure we do not mark the 'fsinfo_inode' inode as dirty if we are not FAT32 (FAT16 and FAT12 do not have the FSINFO block) or if we are in R/O mode. As a bonus, we can also remove the '->sync_fs()' and '->write_super()' FAT call-back function because they become unneeded. Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Artem Bityutskiy authored
Preparation for further changes. It touches few functions in fatent.c and prevents them from marking the superblock as dirty unnecessarily often. Namely, instead of marking it as dirty in the internal tight loops - do it only once at the end of the functions. And instead of marking it as dirty while holding the FAT table lock, do it outside the lock. The reason for this patch is that marking the superblock as dirty will soon become a little bit heavier operation, so it is cleaner to do this only when it is necessary. Signed-off-by:
-
Artem Bityutskiy authored
A preparation patch which introduces a 'mark_fsinfo_dirty()' helper function which just sets the 's_dirt' flag to 1 so far. I'll add more code to this helper later, so I do not mark it as 'inline'. Signed-off-by:
-
Artem Bityutskiy authored
This is patchset makes fatfs stop using the VFS '->write_super()' method for writing out the FSINFO block. The final goal is to get rid of the 'sync_supers()' kernel thread. This kernel thread wakes up every 5 seconds (by default) and calls '->write_super()' for all mounted file-systems. And the bad thing is that this is done even if all the superblocks are clean. Moreover, some file-systems do not even need this end they do not register the '->write_super()' method at all (e.g., btrfs). So 'sync_supers()' most often just generates useless wake-ups and wastes power. I am trying to make all file-systems independent of '->write_super()' and plan to remove 'sync_supers()' and '->write_super' completely once there are no more users. The '->write_supers()' method is mostly used by baroque file-systems like hfs, udf, etc. Modern file-systems like btrfs and xfs do not use it. This justifies removing this stuff from VFS completely and make every FS self-manage own superblock. Tested with xfstests. This patch: Preparation for further changes. It introduces a special inode ('fsinfo_inode') in FAT file-system which we'll later use for managing the FSINFO block. Note, this there is already one special inode ('fat_inode') which is used for managing the FAT tables. Introduce new 'MSDOS_FSINFO_INO' constant for this special inode. It is safe to do because FAT file-system does not store inode numbers on the media but generates them run-time. I've also cleaned up the comment to existing 'MSDOS_ROOT_INO' constant, while on it. Signed-off-by: -
Dan Carpenter authored
The PRINTK() macro isn't really used. Let's just remove it because it is ugly and out of date. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by:
-
Ryusuke Konishi authored
There are two cases that the cache flush is needed to avoid data loss against unexpected hang or power failure. One is sync file function (i.e. nilfs_sync_file) and another is checkpointing ioctl. This issues a cache flush request to device for such cases if barrier mount option is enabled, and makes sure data really is on persistent storage on their completion. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Will Deacon authored
As described in commit 07d106d0 ("vfs: fix up ENOIOCTLCMD error handling"), drivers should return -ENOIOCTLCMD if they receive an ioctl command which they don't understand. Doing so will result in -ENOTTY being returned to userspace, which matches the behaviour of the compat layer if it fails to translate an ioctl command. This patch fixes the pipe ioctl to return -ENOIOCTLCMD instead of -EINVAL when passed an unknown ioctl command. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Alan Cox <alan@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
H Hartley Sweeten authored
The init/mount.o source files produce a number of sparse warnings of the type: warning: incorrect type in argument 1 (different address spaces) expected char [noderef] <asn:1>*dev_name got char *name This is due to the syscalls expecting some of the arguments to be user pointers but they are being passed as kernel pointers. This is harmless but adds a lot of noise to a sparse build. To limit the noise just disable the sparse checking in the relevant source files, but still display a warning so that the user knows this has been done. Since the sparse checking has been disabled we can also remove the __user __force casts that are scattered thru the source. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Joe Perches authored
Suggest the shorter pr_<level> instead of printk(KERN_<LEVEL>. Prefer to use pr_<level> over bare printks. Prefer to use pr_warn over pr_warning. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eric Nelson authored
Requires --strict option during invocation: ~/linux$ scripts/checkpatch --strict foo.patch This tests for a bad habits of mine like this: return 0 ; Note that it does allow a special case of a bare semicolon for empty loops: while (foo()) ; Signed-off-by:
Eric Nelson <eric.nelson@boundarydevices.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Denys Vlasenko authored
Previous code was using optimizations which were developed to work well even on narrow-word CPUs (by today's standards). But Linux runs only on 32-bit and wider CPUs. We can use that. First: using 32x32->64 multiply and trivial 32-bit shift, we can correctly divide by 10 much larger numbers, and thus we can print groups of 9 digits instead of groups of 5 digits. Next: there are two algorithms to print larger numbers. One is generic: divide by 1000000000 and repeatedly print groups of (up to) 9 digits. It's conceptually simple, but requires an (unsigned long long) / 1000000000 division. Second algorithm splits 64-bit unsigned long long into 16-bit chunks, manipulates them cleverly and generates groups of 4 decimal digits. It so happens that it does NOT require long long division. If long is > 32 bits, division of 64-bit values is relatively easy, and we will use the first algorithm. If long long is > 64 bits (strange architecture with VERY large long long), second algorithm can't be used, and we again use the first one. Else (if long is 32 bits and long long is 64 bits) we use second one. And third: there is a simple optimization which takes fast path not only for zero as was done before, but for all one-digit numbers. In all tested cases new code is faster than old one, in many cases by 30%, in few cases by more than 50% (for example, on x86-32, conversion of 12345678). Code growth is ~0 in 32-bit case and ~130 bytes in 64-bit case. This patch is based upon an original from Michal Nazarewicz. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Denys Vlasenko <vda.linux@googlemail.com> Cc: Douglas W Jones <jones@cs.uiowa.edu> Signed-off-by:
-
Grant Likely authored
The '%p' output of the kernel's vsprintf() uses spec.field_width to determine how many digits to output based on 2 * sizeof(void*) so that all digits of a pointer are shown. ie. a pointer will be output as "001A2B3C" instead of "1A2B3C". However, if the '#' flag is used in the format (%#p), then the code doesn't take into account the width of the '0x' prefix and will end up outputing "0x1A2B3C" instead of "0x001A2B3C". This patch reworks the "pointer()" format hook to include 2 characters for the '0x' prefix if the '#' flag is included. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Nicolas Pitre authored
Signed-off-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Colin Cross <ccross@android.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Andrew Morton authored
Use the module-wide pr_fmt() mechanism rather than open-coding "genirq: " everywhere. Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Sasikantha babu authored
sethostname() and setdomainname() notify userspace on failure (without modifying uts_kern_table). Change things so that we only notify userspace on success, when uts_kern_table was actually modified. Signed-off-by:
Sasikantha babu <sasikanth.v19@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: WANG Cong <amwang@redhat.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Gustavo Padovan authored
Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Sergei Shtylyov authored
This driver uses PCI_CLASS_REVISION instead of PCI_REVISION_ID, so it wasn't converted by 44c10138 ("PCI: Change all drivers to use pci_device->revision"). In one case, it even reads PCI revision ID without using it -- that code is now removed... Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Acked-by:
"Nandigama, Nagalakshmi" <Nagalakshmi.Nandigama@lsi.com> Cc: Eric Moore <eric.moore@lsi.com> Acked-by:
Auke Kok <auke-jan.h.kok@intel.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Wei Yang authored
In the comment of allocate_resource(), the explanation of parameter max and min is not correct. Actually, these two parameters are used to specify the range of the resource that will be allocated, not the min/max size that will be allocated. Signed-off-by:
Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by:
-
Xi Wang authored
ULONG_MAX is often used to check for integer overflow when calculating allocation size. While ULONG_MAX happens to work on most systems, there is no guarantee that `size_t' must be the same size as `long'. This patch introduces SIZE_MAX, the maximum value of `size_t', to improve portability and readability for allocation size validation. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Acked-by:
Alex Elder <elder@dreamhost.com> Cc: David Airlie <airlied@linux.ie> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Xi Wang authored
Add the new kmalloc_array() to the list of general-purpose memory allocators in chapter 14. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Acked-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Kautuk Consul authored
Commit d065bd81 ("mm: retry page fault when blocking on disk transfer") and commit 37b23e05 ("x86,mm: make pagefault killable") introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to um. Signed-off-by:
Kautuk Consul <consul.kautuk@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Signed-off-by:
-
Andrew Morton authored
This allocation may be large. The code is probing to see if it will succeed and if not, it falls back to vmalloc(). We should suppress any page-allocation failure messages when the fallback happens. Reported-by:
Dave Jones <davej@redhat.com> Acked-by:
-
- 29 May, 2012 2 commits
-
-
Sachin Kamat authored
rtc-s3c.c:673:32: warning: `s3c_rtc_drv_data_array' defined but not used [-Wunused-variable] Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Hannu Heikkinen authored
Use the devres managed resource functions in the probe routine. Also affects the remove routine where the previously used free and release functions are not needed. The devm_* functions eliminate the need for manual resource releasing and simplify error handling. Resources allocated by devm_* are freed automatically on driver detach. Signed-off-by:
Hannu Heikkinen <ext-hannu.m.heikkinen@nokia.com> Acked-by:
Stephen Warren <swarren@wwwdotorg.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
