fsck passes read_only as a mount option, and it's required for
nochanges, which it also uses.

Usually read_only is handled by the VFS, but we need to be able to
handle it too; we just don't want to print it out twice, so mark it as a
hidden option.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Don't allocate the new bkey_cached until after we've done the btree
lookup; this means we can kill bkey_cached.valid.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes an accounting mismatch for cached data.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This adds a new helper, bch2_folio_reservation_get_partial(), which
reserves as many blocks as possible and may return partial success.

__bch2_buffered_write() is switched to the new helper - this fixes
fstests generic/275, the write until -ENOSPC test.

generic/230 now fails: this appears to be a test bug, where xfs_io isn't
looping after a partial write to get the error code.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add support for STATX_DIOALIGN to bcachefs, so that direct I/O alignment
restrictions are exposed to userspace in a generic way.

[Before]
```
./statx_test /mnt/bcachefs/test
statx(/mnt/bcachefs/test) = 0
dio mem align:0
dio offset align:0
```

[After]
```
./statx_test /mnt/bcachefs/test
statx(/mnt/bcachefs/test) = 0
dio mem align:1
dio offset align:512
```
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

As part of improving btree key cache coherency, the bkey_cached.valid
flag is going away.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Set the preferred folio order in the fgp_flags by calling
fgf_set_order(). Page cache will try to allocate large folio of the
preferred order whenever possible instead of allocating multiple 0 order
folios.

This improves the buffered write performance up to 1.25x with default
mount options and up to 1.57x when mounted with no_data_io option with
the following fio workload:

fio --name=bcachefs --filename=/mnt/test  --size=100G \
     --ioengine=io_uring --iodepth=16 --rw=write --bs=128k
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Use FGP_WRITEBEGIN to avoid repeating the individual FGP flags before
starting a buffered write.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

gc_lock is now only for synchronization between check_alloc_info and
interior btree updates - nothing else
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

this is an internal implementation detail - and we're improving key
cache coherency
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

new helper - small refactoring
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

we have a separate helper for releasing write locks
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

gc_pos is now based on keys, not nodes, for invariantness w.r.t. splits
and merges
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The transaction commit path takes mark_lock, so we shouldn't be holding
it; use a bpos as an iterator so that we can drop and retake.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new helper to free zeroed out accounting entries, and use it in
bch2_replicas_gc2(); bch2_replicas_gc2() was killing superblock replicas
entries if their corresponding accounting counters were nonzero, but
that's incorrect - the superblock replicas entry needs to exist if the
accounting entry exists, not if it's nonzero, because we check and
create the replicas entry when creating the new accounting entry - we
don't know when it's becoming nonzero.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Break up the percpu counter allocations into individual allocations for
each disk accounting counter; this fixes an issue on large systems where
we have too many replica entries to for the percpu allocator's max
practical size.

Also, use just one eytzinger tree for the normal set of counters and the
gc counters; this simplifies accounting_gc_done() where we need the same
set of counters to be present in both tables.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

smatch warns that the copy of arg to userspace is a potential data
leak by virtue of arg.pad not being checked or zeroed. This was
introduced by the commit referenced below that switched arg from
being a zeroed runtime allocation to living on the stack. Fix by
simply zero initializing the structure.

Fixes: cde738a61e65 ("bcachefs: Convert bch2_ioctl_fs_usage() to new accounting")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch2_accounting_mem_insert() drops and retakes mark_lock; thus, we need
to check if the entry in question has already been inserted.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The commit 65bd4423 ("bcachefs: bch2_btree_insert_trans() no longer
specifies BTREE_ITER_cached") removes BTREE_ITER_cached from
bch2_btree_insert_trans, which causes the update_inode function from
bcachefs-tools to take a long time (~20s).  Add an iter_flags parameter
to bch2_btree_insert, so the users can specify iter update trigger
flags, such as BTREE_ITER_cached.
Signed-off-by: Ariel Miculas <ariel.miculas@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a new ioctl that can return the new accounting counter types; it
takes as input a bitmask of accounting types to return.

This will be used for returning e.g. compression accounting and
rebalance_work accounting.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

By removing the early-exit when REMAP_FILE_DEDUP is set, we should be
able to support the fideduperange ioctl, albeit less efficiently than if
we handled some of the extent locking and comparison logic inside
bcachefs.  Extent comparison logic already exists inside of
`__generic_remap_file_range_prep`.
Signed-off-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Implement support for FS_IOC_SETFSLABEL ioctl to set filesystem
label.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Implement support for FS_IOC_GETFSLABEL ioctl to read filesystem
label.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

In this patch we add the FS_IOC_GETVERSION ioctl for getting
i_generation from inode, after that, users can list file's
generation number by using "lsattr".
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We can't hold locks while waiting for user input, that's a deadlock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add trace_bch2_sync_fs() and trace_bch2_fsync() implementations.

The output in trace is as follows:
  sync-29779   [000] .....   193.700935: bch2_sync_fs: dev 254,16 wait 1
  <...>-40027  [002] .....   342.535227: bch2_fsync: dev 254,32 ino 4099 parent 4096 datasync 1
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We already using mapping_set_error() in bch2_writepage_io_done(), so all
we need to do is to use file_check_and_advance_wb_err() when handling
fsync() requests in bch2_fsync().
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Commit 0c0cbfdb dropped the ctx->pos
update before the call to dir_emit. This breaks the userspace
implementation, causing the directory reads to be stuck in an infinite
loop. This doesn't happen in the kernel because the vfs handles the
updates to ctx->pos, but in the fuse implementation nobody updates
it.
Signed-off-by: Ariel Miculas <ariel.miculas@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We now read the line from the buffer atomically, which means we have to
allow the buffer to grow past STDIO_REDIRECT_BUFSIZE if we're waiting
for a full line - this behaviour is necessary for
stdio_redirect_readline_timeout() in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>