- 21 Aug, 2013 23 commits
-
-
Alexander Shiyan authored
Patch allow to use different mode settings for SPI (MODE3 for example) and limit maximal speed according to IC datasheet. Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Alexander Shiyan authored
Flags is not used by boards, so remove this field from the driver platform_data. Signed-off-by:
-
Alexander Shiyan authored
This patch replaces power callbacks to the regulator API. To improve the readability of the code, helper for the regulator enable/disable was added. Acked-by:
Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by:
-
Sean Cross authored
Some boards require custom PHY configuration, for example due to trace length differences. Add the ability to configure these registers in order to get the PHY to function on boards that need it. Because PHYs are auto-detected based on MDIO device IDs, allow PHY configuration to be specified in the parent Ethernet device node if no PHY device node is present. Signed-off-by:
Sean Cross <xobs@kosagi.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Instead of hard-coding length values, use a define to make it clear where those lengths come from. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
For the functions mld_gq_start_timer(), mld_ifc_start_timer(), and mld_dad_start_timer(), rather use unsigned long than int as we operate only on unsigned values anyway. This seems more appropriate as there is no good reason to do type conversions to int, that could lead to future errors. Signed-off-by:
-
Daniel Borkmann authored
Use proper API functions to calculate jiffies from milliseconds and not the crude method of dividing HZ by a value. This ensures more accurate values even in the case of strange HZ values. While at it, also simplify code in the mlh2 case by using max(). Signed-off-by:
-
Matus Ujhelyi authored
Some phy's can be configured to enable wake on lan (e.g. at803x or marvell 88E1318S). There is no way how to enable wol on CPSW with such connected phys. This patch adds this support. It is provided by calling the phy's related code. Tested on board with at8030x connected phy. Wol interrupt line is connected to GPIO0 on am335x. Signed-off-by:
Matus Ujhelyi <ujhelyi.m@gmail.com> Acked-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
-
Mugunthan V N authored
CPSW driver no longer supports platform register as all the SoCs which has CPSW are supporting DT only booting, so moving cpsw.h header file from platform include to drivers/net/ethernet/ti Signed-off-by:
-
Nicolas Dichtel authored
When an Xin6 tunnel is set up, we check other netdevices to inherit the link- local address. If none is available, the interface will not have any link-local address. RFC4862 expects that each interface has a link local address. Now than this kind of tunnels supports x-netns, it's easy to fall in this case (by creating the tunnel in a netns where ethernet interfaces stand and then moving it to a other netns where no ethernet interface is available). RFC4291, Appendix A suggests two methods: the first is the one currently implemented, the second is to generate a unique identifier, so that we can always generate the link-local address. Let's use eth_random_addr() to generate this interface indentifier. I remove completly the previous method, hence for the whole life of the interface, the link-local address remains the same (previously, it depends on which ethernet interfaces were up when the tunnel interface was set up). Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
David S. Miller authored
This reverts commit df8372ca. These changes are buggy and make unintended semantic changes to ip6_tnl_add_linklocal(). Signed-off-by:
-
Julia Lawall authored
Use devm_ioremap_resource instead of devm_request_and_ioremap. This was done using the semantic patch scripts/coccinelle/api/devm_ioremap_resource.cocci The relevant call to platform_get_resource was manually moved down to the call to devm_ioremap_resource. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by:Libo Chen <libo.chen@huawei.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of_dev->dev, so we can directly pass a struct platform_device. Signed-off-by:Michal Simek <monstr@monstr.eu> Signed-off-by:
-
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: -
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: -
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &of->dev, so we can directly pass a struct platform_device. Signed-off-by: -
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &ofdev->dev, so we can directly pass a struct platform_device. Signed-off-by: -
Libo Chen authored
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: -
Sergei Shtylyov authored
Now that the 'register_type' field of the 'sh_eth' driver's platform data is not used by the driver anymore, it's time to remove it and its initializers from the SH platform code. Also move *enum* declaring values for this field from <linux/sh_eth.h> to the local driver's header file as they're only needed by the driver itself now... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
The register layout is a SoC characteristic, so it's wrong that it's stored in the otherwise board specific platform data. Add 'register_type' field to 'struct sh_eth_cpu_data', initialize it properly for each SoC, and read it from this structure instead of the platfrom data from now on... Signed-off-by:
-
Sergei Shtylyov authored
The Ether platform data is behind the declaration of 'struct sh_eth_plat_data' as it's lacking the initializers for the 'register_type' and 'phy_interface' fields -- it means they'll be implicitly and wrongly set to SH_ETH_REG_GIGABIT and PHY_INTERFACE_MODE_NA. Initialize the fields explicitly and fix off-by-one error in the Ether memory resource end, while at it... Signed-off-by:
-
Sergei Shtylyov authored
The 'sh_eth' driver's probe will crash as the platform code is hopelessly behind the platform data -- it passes PHY ID instead of 'struct sh_eth_plat_data *'. Strangely, both commit d88a3ea6 (SH7619 add ethernet controler support) that added the platform code and commit 71557a37 ([netdrvr] sh_eth: Add SH7619 support) were done in about the same time, yet the latter one added 'struct sh_eth_plat_data' and the platform code didn't ever get updated... Add the proper platform data and fix off-by-one memory resource end error, while at it... Signed-off-by:
-
- 20 Aug, 2013 17 commits
-
-
Dan Carpenter authored
We need to move the derefernce after the IS_ERR() check. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Hyong-Youb Kim authored
Add the ndo_busy_poll handler. Use skb_mark_napi_id to mark receive packets with the napi id. For each slice, use per-slice spinlock and state variable to ensure that only one handler processes receive pacekts. Locking, statistics counters, and the ndo_busy_poll handler follow those in the ixgbe driver. So, credit goes to that driver's authors. Signed-off-by:
Hyong-Youb Kim <hykim@myri.com> Signed-off-by:
-
Eric Dumazet authored
As discussed last year [1], there is no compelling reason to limit IPv4 MTU to 0xFFF0, while real limit is 0xFFFF [1] : http://marc.info/?l=linux-netdev&m=135607247609434&w=2 Willem raised this issue again because some of our internal regression tests broke after lo mtu being set to 65536. IP_MTU reports 0xFFF0, and the test attempts to send a RAW datagram of mtu + 1 bytes, expecting the send() to fail, but it does not. Alexey raised interesting points about TCP MSS, that should be addressed in follow-up patches in TCP stack if needed, as someone could also set an odd mtu anyway. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Asias He authored
memcpy_fromiovec is moved from net/core/iovec.c to lib/iovec.c. linux/uio.h provides the declaration for memcpy_fromiovec. Include linux/uio.h instead of inux/socket.h for it. Signed-off-by:
Asias He <asias@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Christoph Paasch authored
The nocache-argument was used in tcp_v4_send_synack as an argument to inet_csk_route_req. However, since ba3f7f04 (ipv4: Kill FLOWI_FLAG_RT_NOCACHE and associated code.) this is no more used. This patch removes the unsued argument from tcp_v4_send_synack. Signed-off-by:
Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by:
-
Anders Larsen authored
When attempting to change e.g. the advertising mask when the link is down ecmd->speed is -1 causing mii_ethtool_sset() to bail out. This bug bit when connecting to a gigabit switch through a 4-pin (industrial) cable, since link negotiation would not complete (both endpoints claimed to be gigabit-capable, but this is not possible with only 4 pins). Any attempt to fix this by setting autonegation to not offer 1000Mbps failed as the setting would not be accepted while the link was still down... Set ecmd->speed to SPEED_1000 to satisfy mii_ethtool_sset() (the actual value of ecmd->speed doesn't matter as long as it is valid, since a re-negotation is forced afterwards). Signed-off-by:
Anders Larsen <al@alarsen.net> Signed-off-by:
-
Wei Yongjun authored
Add the missing unlock before return from function moxart_mac_start_xmit() in the error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Denis Kirjanov authored
Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Denis Kirjanov authored
Signed-off-by:
-
dingtianhong authored
ERROR: code indent should use tabs where possible: fix 2. ERROR: do not use assignment in if condition: fix 5. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
-
dingtianhong authored
Just follow the Joe Perches's opinion, it is a better way to fix the style errors. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Wei Yongjun authored
The callback function of call_rcu() just calls a kfree(), so we can use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Peter Wu authored
The ethtool core will lower the requested length to the one returned by get_regs_len, therefore no additional check is needed in the get_regs function. Reported-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Peter Wu <lekensteyn@gmail.com> Signed-off-by:
-
Neel Patel authored
This patch generates a hardware crash notification (NETDEV_REBOOT) during reset. After a hardware crash, ENIC resets all its resources including queue pair filters programmed by USNIC. USNIC registers for this notification, and on receiving it, reprograms the queue pair filters. Signed-off-by:
Neel Patel <neepatel@cisco.com> Signed-off-by:
Nishank Trivedi <nistrive@cisco.com> Signed-off-by:
Christian Benvenuti <benve@cisco.com> Signed-off-by:
-
Neel Patel authored
This patch adds an interface for USNIC to proxy firmware commands through ENIC. Signed-off-by:
-
Neel Patel authored
This patch, - Adds new firmware commands for the new Cisco Low Latency NIC (aka. USNIC). Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Conflicts: net/netfilter/nf_conntrack_proto_tcp.c The conflict had to do with overlapping changes dealing with fixing the use of an "s32" to hold the value returned by NAT_OFFSET(). Pablo Neira Ayuso says: ==================== The following batch contains Netfilter/IPVS updates for your net-next tree. More specifically, they are: * Trivial typo fix in xt_addrtype, from Phil Oester. * Remove net_ratelimit in the conntrack logging for consistency with other logging subsystem, from Patrick McHardy. * Remove unneeded includes from the recently added xt_connlabel support, from Florian Westphal. * Allow to update conntracks via nfqueue, don't need NFQA_CFG_F_CONNTRACK for this, from Florian Westphal. * Remove tproxy core, now that we have socket early demux, from Florian Westphal. * A couple of patches to refactor conntrack event reporting to save a good bunch of lines, from Florian Westphal. * Fix missing locking in NAT sequence adjustment, it did not manifested in any known bug so far, from Patrick McHardy. * Change sequence number adjustment variable to 32 bits, to delay the possible early overflow in long standing connections, also from Patrick. * Comestic cleanups for IPVS, from Dragos Foianu. * Fix possible null dereference in IPVS in the SH scheduler, from Daniel Borkmann. * Allow to attach conntrack expectations via nfqueue. Before this patch, you had to use ctnetlink instead, thus, we save the conntrack lookup. * Export xt_rpfilter and xt_HMARK header files, from Nicolas Dichtel. ==================== Signed-off-by:
-
