Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch includes:
 - Counting statistics ramrods as EQ ramrods the way they should be. This
   accounting is meant to prevent MC asserts in case of software bugs.
 - Fixes in debug facilities which were added while working on one of such
   bugs.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also fixes minor formatting in that function.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As a result of DCBX negotiation some priorities maybe untouched and still
unmapped to any COS; instead of sending them to COS0 we assign them
to the same COS as L2 traffic - to avoid collisions with storage class of
service.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Fix improper protocol err_handler, current implementation is fully
unapplicable and may cause kernel crash due to double kfree_skb.
Signed-off-by: Dmitry Kozlov <xeb@mail.ru>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt_tos was changed to iph->tos but it must be filtered by RT_TOS
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated #include('s) in
  drivers/net/via-velocity.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated #include('s) in
  drivers/net/qlge/qlge_main.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated #include('s) in
  drivers/net/igb/igb_main.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated #include('s) in
  drivers/net/can/c_can/c_can.c
  drivers/net/can/c_can/c_can_platform.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove duplicated #include('s) in
  drivers/net/bna/bnad.c
Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

As reported by Ben Greer and Froncois Romieu. The code path in
the netif_carrier code leads it to try and disable
a late workqueue to reenable it immediately
netif_carrier_on
-> linkwatch_fire_event
   -> linkwatch_schedule_work
      -> cancel_delayed_work
         -> del_timer_sync

If __cancel_delayed_work is used instead then there is no
problem of waiting for running linkwatch_event.

There is a race between linkwatch_event running re-scheduling
but it is harmless to schedule an extra scan of the linkwatch queue.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Consolidated bfa_sm.h and bfa_wc.h into bfa_cs.h
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Heartbeat failure counter is not incrementing under some scenarios.
   Update hbfails and hb_count stats during hwerror event.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Added logic to unlock hw semaphore if the previos FW boot was from boot
   code (flash based) and the current FW initialization attempt is from OS
   driver.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Changed event name IOC_E_PFAILED to IOC_E_PFFAILED
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - If there is a command pending in the mailbox, bfa_ioc_mbox_queue() enqueues
   the mailbox command to a pending command queue. Entries in this queue are
   not flushed when IOC is disabled. As a result, when IOC is re-enabled again,
   the stale entries in the pending command queue are posted to the mailbox.
   When these mailbox commands are processed by the FW and responses are sent,
   unexpected  events are received by other modules' FSMs (f.e. bfa_msgq) which
   have not posted any mailbox commands after IOC was enabled.
 - Flush the pending mailbox command queue when IOC is disabled. Rename
   bfa_ioc_mbox_hbfail to bfa_ioc_mbox_flush. Call bfa_ioc_mbox_flush
   from bfa_iocpf_sm_disabled_entry()
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Always set mbox irq index to zero and make corresponding changes in mbox
   irq alloc/sync function and txrx irq index calculation. Add definition of
   BNAD_INTX_TX_IB_BITMASK & BNAD_INTX_RX_IB_BITMASK and update
   bnad_txrx_irq_alloc accordingly.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Chnage details:
 - The module name is not used in case of state machine fault, hence no longer
   passing the module name to the fault handler.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Replace IOC HB failure event notification with a more generic mechanism
   that is capable of sending enble, disable, and failed events to registered
   modules. As a result, cee  module event handling callback bfa_cee_hbfail()
   is replaced with bfa_cee_notify() so that it can receive and handle
   different events from IOC.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Driver cleanup as per new checkpatch v0.31
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change details:
 - Print the dirver version when module is loaded.
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some minor cleanups that won't impact code:
  1. Remove inline from non-critical functions; compiler will most
     likely inline them anyway.
  2. Make function args const where possible.
  3. Whitespace cleanup
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When STP changes state of interface need to send a new link
message to reflect that change.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a new device is added to a bridge, the ethernet address of the
bridge network device may change. When the address changes, the
appropriate callback is called, but with the wrong device argument.
The address of the bridge device (ie br0) changes not the address
of the device being passed to add_if (ie eth0).
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the message_age is already greater than the max_age, then the
BPDU is bogus. Linux won't generate BPDU, but conformance tester
or buggy implementation might.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A bridge topology with three systems:

      +------+  +------+
      | A(2) |--| B(1) |
      +------+  +------+
           \    /
          +------+
          | C(3) |
          +------+

What is supposed to happen:
 * bridge with the lowest ID is elected root (for example: B)
 * C detects that A->C is higher cost path and puts in blocking state

What happens. Bridge with lowest id (B) is elected correctly as
root and things start out fine initially. But then config BPDU
doesn't get transmitted from A -> C. Because of that
the link from A-C is transistioned to the forwarding state.

The root cause of this is that the configuration messages
is generated with bogus message age, and dropped before
sending.

In the standardmessage_age is supposed to be:
  the time since the generation of the Configuration BPDU by
  the Root that instigated the generation of this Configuration BPDU.

Reimplement this by recording the timestamp (age + jiffies) when
recording config information. The old code incorrectly used the time
elapsed on the ageing timer which was incorrect.

See also:
  https://bugzilla.vyatta.com/show_bug.cgi?id=7164Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver reads PCI subsystem ID from the PCI configuration register while it's
already stored by the PCI subsystem in the 'subsystem_device' field of 'struct
pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver reads PCI subsystem IDs from the PCI configuration registers while
they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}'
fields of 'struct pci_dev'...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (51 commits)
  PM: Improve error code of pm_notifier_call_chain()
  PM: Add "RTC" to PM trace time stamps to avoid confusion
  PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem
  PM / Suspend: Add .suspend_again() callback to suspend_ops
  PM / OPP: Introduce function to free cpufreq table
  ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active
  PM / Domains: Take .power_off() error code into account
  ARM / shmobile: Use genpd_queue_power_off_work()
  ARM / shmobile: Use pm_genpd_poweroff_unused()
  PM / Domains: Introduce function to power off all unused PM domains
  OMAP: PM: disable idle on suspend for GPIO and UART
  OMAP: PM: omap_device: add API to disable idle on suspend
  OMAP: PM: omap_device: add system PM methods for PM domain handling
  OMAP: PM: omap_device: conditionally use PM domain runtime helpers
  PM / Runtime: Add new helper function: pm_runtime_status_suspended()
  PM / Domains: Queue up power off work only if it is not pending
  PM / Domains: Improve handling of wakeup devices during system suspend
  PM / Domains: Do not restore all devices on power off error
  PM / Domains: Allow callbacks to execute all runtime PM helpers
  PM / Domains: Do not execute device callbacks under locks
  ...

* 'for-linus-core' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (38 commits)
  target: Bump version to v4.1.0-rc1-ml
  target: remove custom hex2bin() implementation
  target: fix typo Assoication -> Association
  target: Update QUEUE ALGORITHM MODIFIER control page default
  target: ->map_task_SG conversion to ->map_control_SG and ->map_data_SG
  target: Follow up core updates from AGrover and HCH (round 4)
  target: Eliminate usage of struct se_mem
  target: Pass 2nd param of transport_split_cdb by value
  target: Enforce 1 page max for control cdb buffer sizes
  target: Make all control CDBs scatter-gather
  target: Implement Block Device Characteristics VPD page
  target: Fix reporting of supported VPD pages
  target: Allow for built-in target modules
  tcm_fc: Convert to wake_up_process and schedule_timeout_interruptible
  tcm_fc: Makefile cleanups
  loopback: Fix memory leak in tcm_loop_make_scsi_hba()
  loopback: Remove duplicate scsi/scsi_tcq.h include
  loopback: off by one in tcm_loop_make_naa_tpg()
  target/iblock: Remove unused iblock_dev members
  target/iblock: Use request_queue->nr_request for se_device defaults
  ...

* 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: Fixup __this_cpu_xchg* operations

* 'for-3.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: separate out drain_workqueue() from destroy_workqueue()
  workqueue: remove cancel_rearming_delayed_work[queue]()

* 'ptrace' of git://git.kernel.org/pub/scm/linux/kernel/git/oleg/misc: (39 commits)
  ptrace: do_wait(traced_leader_killed_by_mt_exec) can block forever
  ptrace: fix ptrace_signal() && STOP_DEQUEUED interaction
  connector: add an event for monitoring process tracers
  ptrace: dont send SIGSTOP on auto-attach if PT_SEIZED
  ptrace: mv send-SIGSTOP from do_fork() to ptrace_init_task()
  ptrace_init_task: initialize child->jobctl explicitly
  has_stopped_jobs: s/task_is_stopped/SIGNAL_STOP_STOPPED/
  ptrace: make former thread ID available via PTRACE_GETEVENTMSG after PTRACE_EVENT_EXEC stop
  ptrace: wait_consider_task: s/same_thread_group/ptrace_reparented/
  ptrace: kill real_parent_is_ptracer() in in favor of ptrace_reparented()
  ptrace: ptrace_reparented() should check same_thread_group()
  redefine thread_group_leader() as exit_signal >= 0
  do not change dead_task->exit_signal
  kill task_detached()
  reparent_leader: check EXIT_DEAD instead of task_detached()
  make do_notify_parent() __must_check, update the callers
  __ptrace_detach: avoid task_detached(), check do_notify_parent()
  kill tracehook_notify_death()
  make do_notify_parent() return bool
  ptrace: s/tracehook_tracer_task()/ptrace_parent()/
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (31 commits)
  HID: fix support for Microsoft comfort mouse 4500
  HID: hid-multitouch: add one new multitouch device's VID/PID
  HID: prodikeys: remove a redundant forward declaration of struct pcmidi_snd
  HID: prodikeys: make needlessly global symbols static
  HID: emsff: properly handle emsff_init failure
  HID: ACRUX - add missing hid_hw_stop() in ax_probe() error path
  HID: fix horizontal wheel for ms comfort mouse 4500
  HID: uclogic: Add support for UC-Logic WP1062
  HID: wiimote: Add sysfs support to wiimote driver
  HID: wiimote: Cache wiimote led state
  HID: wiimote: Add wiimote led request
  HID: wiimote: Add wiimote input button parser
  HID: wiimote: Add wiimote event handler
  HID: wiimote: Add output queue for wiimote driver
  HID: wiimote: Add wiimote send function
  HID: wiimote: Synchronize wiimote input and hid event handling
  HID: wiimote: Register input device in wiimote hid driver
  HID: wiimote: Add wiimote device structure
  HID: wiimote: Register wiimote hid driver stub
  HID: wiimote: Add Nintendo Wii Remote driver stub
  ...

* 'of-pci' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  pci/of: Consolidate pci_bus_to_OF_node()
  pci/of: Consolidate pci_device_to_OF_node()
  x86/devicetree: Use generic PCI <-> OF matching
  microblaze/pci: Move the remains of pci_32.c to pci-common.c
  microblaze/pci: Remove powermac originated cruft
  pci/of: Match PCI devices to OF nodes dynamically

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  dt: include linux/errno.h in linux/of_address.h
  of/address: Add of_find_matching_node_by_address helper
  dt: remove extra xsysace platform_driver registration
  tty/serial: Add devicetree support for nVidia Tegra serial ports
  dt: add empty of_property_read_u32[_array] for non-dt
  dt: bindings: move SEC node under new crypto/
  dt: add helper function to read u32 arrays
  tty/serial: change of_serial to use new of_property_read_u32() api
  dt: add 'const' for of_property_read_string parameter **out_string
  dt: add helper functions to read u32 and string property values
  tty: of_serial: support for 32 bit accesses
  dt: document the of_serial bindings
  dt/platform: allow device name to be overridden
  drivers/amba: create devices from device tree
  dt: add of_platform_populate() for creating device from the device tree
  dt: Add default match table for bus ids