- 27 Jun, 2017 2 commits
-
-
Minwoo Im authored
SAT-4(SCSI/ATA Translation) supports for an ata pass-thru(32). This patch will allow to translate an ata pass-thru(32) SCSI cmd to an ATA cmd. Signed-off-by:
Minwoo Im <dn3108@gmail.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Shawn Lin authored
Adding ASMedia 1061R and 1062R platform device IDs for SATA. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
-
- 26 Jun, 2017 1 commit
-
-
Ondrej Zary authored
VT6420 seems to have the same hotplug capability as VT6421. However, enabling hotplug needs to expose SCR registers which can cause problems. It works for me but might break elsewhere. So add a module parameter vt6420_hotplug to enable this feature. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
- 22 Jun, 2017 3 commits
-
-
Doug Berger authored
This commit makes use of the AHCI_HFLAG_YES_ALPM flag to prevent the driver from writing to the read-only Host Capability register. It also sets the AHCI_HFLAG_NO_WRITE_TO_RO flag to prevent the AHCI library from writing to read-only registers. Signed-off-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
-
Doug Berger authored
While most hardware will simply ignore a write to a read-only register, some hardware will signal an abort if this occurs. This commit introduces the flag AHCI_HFLAG_NO_WRITE_TO_RO to prevent the AHCI library from attempting to write to the HOST_CAP, HOST_CAP2, and HOST_PORTS_IMPL registers which may be read-only. Signed-off-by:
-
Doug Berger authored
Some hardware is capable of supporting Aggresive Link Power Management even though it is not indicated by the Host Capability register. This commit adds the AHCI_HFLAG_YES_ALPM flag to the AHCI library to allow indication of this quirk when the Host Capability register is Read Only and therefore cannot be changed. Signed-off-by:
-
- 21 Jun, 2017 1 commit
-
-
Arnd Bergmann authored
The new driver uses an incorrect format string for resource_size_t: drivers/ata/pata_ftide010.c: In function 'pata_ftide010_probe': drivers/ata/pata_ftide010.c:520:17: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=] The nicest way to print the address is to pretty-print the resource using %pR. Fixes: be4e456e ("ata: Add driver for Faraday Technology FTIDE010") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
- 20 Jun, 2017 1 commit
-
-
Minwoo Im authored
The function name used to be ata_scsiop_mode_select() but renamed to ata_scsi_mode_select_xlat(). Update the comment accordingly. tj: Minor commit desc update. Signed-off-by:
-
- 19 Jun, 2017 2 commits
-
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 3946 2296 0 6242 1862 drivers/ata/sata_rcar.o File size after constify sata_rcar_match. text data bss dec hex filename 5554 696 0 6250 186a drivers/ata/sata_rcar.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. File size before: text data bss dec hex filename 465 696 4 1165 48d drivers/ata/pata_octeon_cf.o File size after constify octeon_cf_match. text data bss dec hex filename 865 280 4 1149 47d drivers/ata/pata_octeon_cf.o Signed-off-by:
-
- 12 Jun, 2017 6 commits
-
-
Joe Perches authored
Linus Torvalds changed the behavior of printks without KERN_<LEVEL>. Convert the continuation prints to use pr_cont. At the same time, convert the existing printks with KERN_<LEVEL> to pr_<level> Miscellanea: o Coalesce a multiline format Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Minwoo Im authored
AHCI 1.3.1 Spec says that software shall build two H2D register FISes in the command list to send a software reset. The comments in ahci_do_softreset() is currently D2H instead of H2D. Signed-off-by:
-
Bhumika Goyal authored
ata_port_info structures are either copied to other objects or their references are stored in objects of type const. So, ata_port_info structures having similar usage pattern can be made const. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Linus Walleij authored
This adds a driver for the Faraday Technology FTIDE010 PATA IP block. When used with the Storlink/Storm/Cortina Systems Gemini SoC, the PATA interface is accompanied by a PATA<->SATA bridge, so while the device appear as a PATA controller, it attaches physically to SATA disks, and also has a designated memory area with registers to set up the bridge. The Gemini SATA bridge is separated into its own driver file to make things modular and make it possible to reuse the PATA driver as stand-alone on other systems than the Gemini. dmesg excerpt from the D-Link DIR-685 storage router: gemini-sata-bridge 46000000.sata: SATA ID 00000e00, PHY ID: 01000100 gemini-sata-bridge 46000000.sata: set up the Gemini IDE/SATA nexus ftide010 63000000.ata: set up Gemini PATA0 ftide010 63000000.ata: device ID 00000500, irq 26, io base 0x63000000 ftide010 63000000.ata: SATA0 (master) start gemini-sata-bridge 46000000.sata: SATA0 PHY ready scsi host0: pata-ftide010 ata1: PATA max UDMA/133 irq 26 ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133 ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 0302 PQ: 0 ANSI: 5 ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA ata1.00: Enabling discard_zeroes_data ata1.00: Enabling discard_zeroes_data sd 0:0:0:0: [sda] Attached SCSI disk After this I can flawlessly mount and read/write copy etc files from /dev/sda[n]. Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by:Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Cortina Systems Gemini PATA to SATA bridge. Cc: devicetree@vger.kernel.org Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Linus Walleij authored
This adds device tree bindings for the Faraday Technology FTIDE010 found in the Storlink/Storm/Cortina Systems Gemini SoC. I am not 100% sure that this part is from Faraday Technology but a lot points in that direction: - A later IDE interface called FTIDE020 exist and share some properties. - The SATA bridge has the same Built In Self Test (BIST) that the Faraday FTSATA100 seems to have, and it has version number 0100 in the device ID register, so this is very likely a FTSATA100 bundled with the FTIDE010. Cc: devicetree@vger.kernel.org Cc: John Feng-Hsin Chiang <john453@faraday-tech.com> Cc: Greentime Hu <green.hu@gmail.com> Acked-by:
-
- 05 Jun, 2017 5 commits
-
-
Christoph Hellwig authored
This allows us to use the generic OPAL code with ATA devices. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Christoph Hellwig authored
tj: Updated line continuation style for consistency as pointed out by Sergei. Signed-off-by: -
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
It is core functionality, and only one of the users is in the EH code. Signed-off-by:
-
- 02 Jun, 2017 1 commit
-
-
Yuantian Tang authored
Ls1088a is new introduced arm-based soc with sata support with following features: * Complies with the serial ATA 3.0 specification and the AHCI 1.3.1 specification * Contains a high-speed descriptor-based DMA controller * Supports the following: * Speeds of 1.5 Gb/s (first-generation SATA), 3 Gb/s (second-generation SATA), and 6 Gb/s (third-generation SATA) * FIS-based switching * Native command queuing (NCQ) commands * Port multiplier operation * Asynchronous notification * SATA Vendor BIST mode Signed-off-by:
Tang Yuantian <andy.tang@nxp.com> Signed-off-by:
-
- 30 May, 2017 6 commits
-
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign drv_data like this. Since ata_host_alloc_pinfo() is called after this site, the correct value is set eventually, but this assignment is just plain pointless. Signed-off-by:
-
Linus Walleij authored
ata_host_alloc_pinfo() assigns the host pointer to the struct device * drvdata, do not assign it a second time. Signed-off-by:
-
- 16 May, 2017 3 commits
-
-
Mauro Carvalho Chehab authored
The libata documentation is now using ReST. Update references to it to point to the new place. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by:
-
Mauro Carvalho Chehab authored
Sphinx got confused with the markup identation: ./drivers/ata/libata-scsi.c:3402: ERROR: Unexpected indentation. No functional changes. Signed-off-by:
-
Tycho Andersen authored
The XPFO [1] patchset may unmap pages from physmap if they happened to be destined for userspace. If such a page is unmapped, it needs to be remapped. Rather than test if a page is in the highmem/xpfo unmapped state, Christoph suggested [2] that we simply always map the page. v2: * drop comment about bounce buffer * don't save IRQs before kmap/unmap * formatting [1]: https://lkml.org/lkml/2016/11/4/245 [2]: https://lkml.org/lkml/2016/11/4/253Suggested-and-reviewed-by:Christoph Hellwig <hch@infradead.org> Signed-off-by:
Tycho Andersen <tycho@docker.com> CC: Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by:
-
- 15 May, 2017 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ... -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "A set of minor cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] Minor cleanup of xattr query function fs: cifs: transport: Use time_after for time comparison SMB2: Fix share type handling cifs: cifsacl: Use a temporary ops variable to reduce code length Don't delay freeing mids when blocked on slow socket write of request CIFS: silence lockdep splat in cifs_relock_file()
-
David S. Miller authored
Shannon Nelson says: ==================== ldmvsw: port removal stability Under heavy reboot stress testing we found a couple of timing issues when removing the device that could cause the kernel great heartburn, addressed by these two patches. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Stop the clean timer earlier to be sure there's no asynchronous interference while stopping the port. Orabug: 25748241 Signed-off-by:
Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by:
-
Thomas Tai authored
When running LDom binding/unbinding test, kernel may panic in ldmvsw_open(). It is more likely that because we're removing the ldc connection before unregistering the netdev in vsw_port_remove(), we set up a window of time where one process could be removing the device while another trying to UP the device. This also sometimes causes vio handshake error due to opening a device without closing it completely. We should unregister the netdev before we disable the "hardware". Orabug: 25980913, 25925306 Signed-off-by:
Thomas Tai <thomas.tai@oracle.com> Signed-off-by:
-
Miroslav Lichvar authored
The driver doesn't support timestamping of all received packets and should return error when trying to enable the HWTSTAMP_FILTER_ALL filter. Cc: WingMan Kwok <w-kwok2@ti.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-05-12 This series contains some mlx5 fixes for net. Please pull and let me know if there's any problem. For -stable: ("net/mlx5e: Fix ethtool pause support and advertise reporting") kernels >= 4.8 ("net/mlx5e: Use the correct pause values for ethtool advertising") kernels >= 4.8 v1->v2: Dropped statistics spinlock patch, it needs some extra work. ==================== Signed-off-by: -
Mahesh Bandewar authored
Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Mintz, Yuval authored
Current memset is using incorrect type of variable, causing the upper-half of the strucutre to be left uninitialized and causing: ethernet/qlogic/qed/qed_init_fw_funcs.c: In function 'qed_set_rfs_mode_disable': ethernet/qlogic/qed/qed_init_fw_funcs.c:993:3: error: '*((void *)&ramline+4)' is used uninitialized in this function [-Werror=uninitialized] Fixes: d51e4af5 ("qed: aRFS infrastructure support") Reported-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Reviewed-by:
-
