- 15 Jun, 2016 11 commits
-
-
Steve French authored
commit 897fba11 upstream. Wrong return code was being returned on SMB3 rmdir of non-empty directory. For SMB3 (unlike for cifs), we attempt to delete a directory by set of delete on close flag on the open. Windows clients set this flag via a set info (SET_FILE_DISPOSITION to set this flag) which properly checks if the directory is empty. With this patch on smb3 mounts we correctly return "DIRECTORY NOT EMPTY" on attempts to remove a non-empty directory. Signed-off-by: Steve French <steve.french@primarydata.com> Acked-by: Sachin Prabhu <sprabhu@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Vineet Gupta authored
commit a6416f57 upstream. ARCompact and ARCv2 only have ASL, while binutils used to support LSL as a alias mnemonic. Newer binutils (upstream) don't want to do that so replace it. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Daniel Bristot de Oliveira authored
commit c14022bf upstream. The device which identifies itself as a "USB Keykoard" (no typo) with VID:PID 1a2c:0027 does not seem to be handling the reports initialization very well. This results in a "usb_submit_urb(ctrl) failed: -1" message from the kernel when connected, and a delay before its initialization. It can also cause the hang the system. This patch adds the quirk for this device, which causes the delay to disappear. It is named as "USB Keykoard2" because the "USB Keykoard" already exists. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Cyan Ogilvie authored
commit d3059673 upstream. The wiimote motion plus gyros use two scales to report fast and slow rotation - below 440 deg/s uses 8192/440 units / deg/s, and above uses 8192/2000 units / deg/s. Previously this driver attempted to linearize the two by scaling the fast rate by 18 and the slow by 9, but this results in a scale of 8192*9/440 = ~167.564 for slow and 8192*18/2000 = 73.728 for fast. Correct the fast motion scale factor so that both report ~167.564 units / deg/s Signed-off-by: Cyan Ogilvie <cyan.ogilvie@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Sean Young authored
commit 6e5e9a06 upstream. This device supports force feedback and has two ports. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Николай Кудрявцев authored
commit 9a1d78a3 upstream. Acer Aspire Switch 12 keyboard Chicony's controller reports too big usage index on the 1st interface. The patch fixes the report. The work based on solution from drivers/hid/hid-holtek-mouse.c Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=101721Signed-off-by: Nicholas Kudriavtsev <nkudriavtsev@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Slava Bacherikov authored
commit f9a82c20 upstream. Microsoft Wireless Comfort Keyboard has vendor specific My Favorites 1-5 keys. Linux already supports this buttons on other MS keyboards by MS_ERGONOMY quirk. So apply MS_ERGONOMY quirk to USB PID 0x00e3 (Microsoft Wireless Optical Desktop Receiver 3.0A). After this My Favorites 1..5 keys will be reported as KEY_F14..KEY_F15 events. Signed-off-by: Slava Bacherikov <slava@bacher09.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Donavan Lance authored
commit c6956eb7 upstream. Adds support for Microsoft Type Cover 3 with 0x07e2 product ID. Signed-off-by: Donavan Lance <shvr@fedoraproject.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Alistair Leslie-Hughes authored
commit c847a89a upstream. Adds support for the Micrsift Digital 4K, Media 600 and Media 3000 V1 Keyboards, which have the same quirks as the already existing hardware MS_NE4K. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=52841 [jkosina@suse.cz: rephrase changelog] Signed-off-by: Alistair Leslie-Hughes <leslie_alistair@hotmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Stephen Just authored
commit 0439de75 upstream. Adding support for the Microsoft Surface 3 (non-pro) Type Cover. The existing definitions and quirks are actually for the Surface Pro 3 type covers. I've renamed the old constants to reflect that they belong to the Surface Pro 3, and added a new constant and matching code for the Surface 3. Signed-off-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Raimund Roth authored
commit 18eec2cd upstream. Adding support for the Microsoft Surface Pro Power Cover. Signed-off-by: Raimund Roth <raimundmroth@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 31 May, 2016 3 commits
-
-
Nazar Mokrynskyi authored
commit 567a44ec upstream. Needed for v2 of the device firmware, otherwise kernel will stuck for few seconds and throw "usb_submit_urb(ctrl) failed: -1" early on system boot. Signed-off-by: Nazar Mokrynskyi <nazar@mokrynskyi.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Trent Lloyd authored
commit 282bf1fe upstream. These devices feature multiple interfaces/endpoints: a legacy BIOS/boot interface (endpoint 0x81), as well as 2 corsair-specific keyboard interfaces (endpoint 0x82, 0x83 IN/0x03 OUT) and an RGB LED control interface (endpoint 0x84 IN/0x04 OUT) Because the extra 3 interfaces are not of subclass USB_INTERFACE_SUBCLASS_BOOT, HID_QUIRK_NOGET is not automatically set on them and a 10s timeout per-endpoint (30s per device) occurs initialising reports on boot. We configure HID_QUIRK_NO_INIT_REPORTS for these devices. Additionally the left-side G1-G18 macro keys on the K95RGB generate output on the un-opened 0x82/0x83 endpoints which causes the keyboard to stop responding waiting for this event to be collected. We enable HID_QUIRK_ALWAYS_POLL to prevent this situation from occurring. Signed-off-by: Trent Lloyd <trent@lloyd.id.au> Tested-by: SUGNIAUX Wilfried <wsu@ppharm2k20.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Jason Gunthorpe authored
commit e6bd18f5 upstream. The drivers/infiniband stack uses write() as a replacement for bi-directional ioctl(). This is not safe. There are ways to trigger write calls that result in the return structure that is normally written to user space being shunted off to user specified kernel memory instead. For the immediate repair, detect and deny suspicious accesses to the write API. For long term, update the user space libraries and the kernel API to something that doesn't present the same security vulnerabilities (likely a structured ioctl() interface). The impacted uAPI interfaces are generally only available if hardware from drivers/infiniband is installed in the system. [js] backport to 3.12: hfi1 is not there yet (exclude), ipath is still there (include) Reported-by: Jann Horn <jann@thejh.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> [ Expanded check to all known write() entry points ] Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 25 May, 2016 1 commit
-
-
Benjamin Coddington authored
commit ce85cfbe upstream. If a READDIR reply comes back without any page data, avoid a NULL pointer dereference in xdr_copy_to_scratch(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 IP: [<ffffffff813a378d>] memcpy+0xd/0x110 ... Call Trace: ? xdr_inline_decode+0x7a/0xb0 [sunrpc] nfs3_decode_dirent+0x73/0x320 [nfsv3] nfs_readdir_page_filler+0xd5/0x4e0 [nfs] ? nfs3_rpc_wrapper.constprop.9+0x42/0xc0 [nfsv3] nfs_readdir_xdr_to_array+0x1fa/0x330 [nfs] ? mem_cgroup_commit_charge+0xac/0x160 ? nfs_readdir_xdr_to_array+0x330/0x330 [nfs] nfs_readdir_filler+0x22/0x90 [nfs] do_read_cache_page+0x7e/0x1a0 read_cache_page+0x1c/0x20 nfs_readdir+0x18e/0x660 [nfs] ? nfs3_xdr_dec_getattr3res+0x80/0x80 [nfsv3] iterate_dir+0x97/0x130 SyS_getdents+0x94/0x120 ? fillonedir+0xd0/0xd0 system_call_fastpath+0x12/0x17 Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: Neil Brown <nfbrown@suse.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 19 May, 2016 11 commits
-
-
Jiri Slaby authored
-
Antonio Alecrim Jr authored
commit eb8948a0 upstream. Signed-off-by: Antonio Alecrim Jr <antonio.alecrim@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Kirill Tkhai authored
commit f7b8a47d upstream. sched_move_task() is the only interface to change sched_task_group: cpu_cgrp_subsys methods and autogroup_move_group() use it. Everything is synchronized by task_rq_lock(), so cpu_cgroup_attach() is ordered with other users of sched_move_task(). This means we do no need RCU here: if we've dereferenced a tg here, the .attach method hasn't been called for it yet. Thus, we should pass "true" to task_css_check() to silence lockdep warnings. Fixes: eeb61e53 ("sched: Fix race between task_group and sched_task_group") Reported-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1414473874.8574.2.camel@tkhaiSigned-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
David Howells authored
commit 23c8a812 upstream. This fixes CVE-2016-0758. In the ASN.1 decoder, when the length field of an ASN.1 value is extracted, it isn't validated against the remaining amount of data before being added to the cursor. With a sufficiently large size indicated, the check: datalen - dp < 2 may then fail due to integer overflow. Fix this by checking the length indicated against the amount of remaining data in both places a definite length is determined. Whilst we're at it, make the following changes: (1) Check the maximum size of extended length does not exceed the capacity of the variable it's being stored in (len) rather than the type that variable is assumed to be (size_t). (2) Compare the EOC tag to the symbolic constant ASN1_EOC rather than the integer 0. (3) To reduce confusion, move the initialisation of len outside of: for (len = 0; n > 0; n--) { since it doesn't have anything to do with the loop counter n. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Peter Jones <pjones@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
David Howells authored
commit 0d62e9dd upstream. If the ASN.1 decoder is asked to parse a sequence of objects, non-optional matches get skipped if there's no more data to be had rather than a data-overrun error being reported. This is due to the code segment that decides whether to skip optional matches (ie. matches that could get ignored because an element is marked OPTIONAL in the grammar) due to a lack of data also skips non-optional elements if the data pointer has reached the end of the buffer. This can be tested with the data decoder for the new RSA akcipher algorithm that takes three non-optional integers. Currently, it skips the last integer if there is insufficient data. Without the fix, #defining DEBUG in asn1_decoder.c will show something like: next_op: pc=0/13 dp=0/270 C=0 J=0 - match? 30 30 00 - TAG: 30 266 CONS next_op: pc=2/13 dp=4/270 C=1 J=0 - match? 02 02 00 - TAG: 02 257 - LEAF: 257 next_op: pc=5/13 dp=265/270 C=1 J=0 - match? 02 02 00 - TAG: 02 3 - LEAF: 3 next_op: pc=8/13 dp=270/270 C=1 J=0 next_op: pc=11/13 dp=270/270 C=1 J=0 - end cons t=4 dp=270 l=270/270 The next_op line for pc=8/13 should be followed by a match line. This is not exploitable for X.509 certificates by means of shortening the message and fixing up the ASN.1 CONS tags because: (1) The relevant records being built up are cleared before use. (2) If the message is shortened sufficiently to remove the public key, the ASN.1 parse of the RSA key will fail quickly due to a lack of data. (3) Extracted signature data is either turned into MPIs (which cope with a 0 length) or is simpler integers specifying algoritms and suchlike (which can validly be 0); and (4) The AKID and SKID extensions are optional and their removal is handled without risking passing a NULL to asymmetric_key_generate_id(). (5) If the certificate is truncated sufficiently to remove the subject, issuer or serialNumber then the ASN.1 decoder will fail with a 'Cons stack underflow' return. This is not exploitable for PKCS#7 messages by means of removal of elements from such a message from the tail end of a sequence: (1) Any shortened X.509 certs embedded in the PKCS#7 message are survivable as detailed above. (2) The message digest content isn't used if it shows a NULL pointer, similarly, the authattrs aren't used if that shows a NULL pointer. (3) A missing signature results in a NULL MPI - which the MPI routines deal with. (4) If data is NULL, it is expected that the message has detached content and that is handled appropriately. (5) If the serialNumber is excised, the unconditional action associated with it will pick up the containing SEQUENCE instead, so no NULL pointer will be seen here. If both the issuer and the serialNumber are excised, the ASN.1 decode will fail with an 'Unexpected tag' return. In either case, there's no way to get to asymmetric_key_generate_id() with a NULL pointer. (6) Other fields are decoded to simple integers. Shortening the message to omit an algorithm ID field will cause checks on this to fail early in the verification process. This can also be tested by snipping objects off of the end of the ASN.1 stream such that mandatory tags are removed - or even from the end of internal SEQUENCEs. If any mandatory tag is missing, the error EBADMSG *should* be produced. Without this patch ERANGE or ENOPKG might be produced or the parse may apparently succeed, perhaps with ENOKEY or EKEYREJECTED being produced later, depending on what gets snipped. Just snipping off the final BIT_STRING or OCTET_STRING from either sample should be a start since both are mandatory and neither will cause an EBADMSG without the patches Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Kangjie Lu authored
[ Upstream commit 79e48650 ] Stack object "dte_facilities" is allocated in x25_rx_call_request(), which is supposed to be initialized in x25_negotiate_facilities. However, 5 fields (8 bytes in total) are not initialized. This object is then copied to userland via copy_to_user, thus infoleak occurs. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Nikolay Aleksandrov authored
[ Upstream commit 31ca0458 ] get_bridge_ifindices() is used from the old "deviceless" bridge ioctl calls which aren't called with rtnl held. The comment above says that it is called with rtnl but that is not really the case. Here's a sample output from a test ASSERT_RTNL() which I put in get_bridge_ifindices and executed "brctl show": [ 957.422726] RTNL: assertion failed at net/bridge//br_ioctl.c (30) [ 957.422925] CPU: 0 PID: 1862 Comm: brctl Tainted: G W O 4.6.0-rc4+ #157 [ 957.423009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.1-20150318_183358- 04/01/2014 [ 957.423009] 0000000000000000 ffff880058adfdf0 ffffffff8138dec5 0000000000000400 [ 957.423009] ffffffff81ce8380 ffff880058adfe58 ffffffffa05ead32 0000000000000001 [ 957.423009] 00007ffec1a444b0 0000000000000400 ffff880053c19130 0000000000008940 [ 957.423009] Call Trace: [ 957.423009] [<ffffffff8138dec5>] dump_stack+0x85/0xc0 [ 957.423009] [<ffffffffa05ead32>] br_ioctl_deviceless_stub+0x212/0x2e0 [bridge] [ 957.423009] [<ffffffff81515beb>] sock_ioctl+0x22b/0x290 [ 957.423009] [<ffffffff8126ba75>] do_vfs_ioctl+0x95/0x700 [ 957.423009] [<ffffffff8126c159>] SyS_ioctl+0x79/0x90 [ 957.423009] [<ffffffff8163a4c0>] entry_SYSCALL_64_fastpath+0x23/0xc1 Since it only reads bridge ifindices, we can use rcu to safely walk the net device list. Also remove the wrong rtnl comment above. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Ian Campbell authored
[ Upstream commit dedc58e0 ] The peer may be expecting a reply having sent a request and then done a shutdown(SHUT_WR), so tearing down the whole socket at this point seems wrong and breaks for me with a client which does a SHUT_WR. Looking at other socket family's stream_recvmsg callbacks doing a shutdown here does not seem to be the norm and removing it does not seem to have had any adverse effects that I can see. I'm using Stefan's RFC virtio transport patches, I'm unsure of the impact on the vmci transport. Signed-off-by: Ian Campbell <ian.campbell@docker.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Cc: Andy King <acking@vmware.com> Cc: Dmitry Torokhov <dtor@vmware.com> Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Adit Ranadive <aditr@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Kangjie Lu authored
[ Upstream commit 5f8e4474 ] The stack object “map” has a total size of 32 bytes. Its last 4 bytes are padding generated by compiler. These padding bytes are not initialized and sent out via “nla_put”. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Kangjie Lu authored
[ Upstream commit b8670c09 ] The stack object “info” has a total size of 12 bytes. Its last byte is padding which is not initialized and leaked via “put_cmsg”. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Neil Horman authored
[ Upstream commit 6071bd1a ] This was recently reported to me, and reproduced on the latest net kernel, when attempting to run netperf from a host that had a netem qdisc attached to the egress interface: [ 788.073771] ---------------------[ cut here ]--------------------------- [ 788.096716] WARNING: at net/core/dev.c:2253 skb_warn_bad_offload+0xcd/0xda() [ 788.129521] bnx2: caps=(0x00000001801949b3, 0x0000000000000000) len=2962 data_len=0 gso_size=1448 gso_type=1 ip_summed=3 [ 788.182150] Modules linked in: sch_netem kvm_amd kvm crc32_pclmul ipmi_ssif ghash_clmulni_intel sp5100_tco amd64_edac_mod aesni_intel lrw gf128mul glue_helper ablk_helper edac_mce_amd cryptd pcspkr sg edac_core hpilo ipmi_si i2c_piix4 k10temp fam15h_power hpwdt ipmi_msghandler shpchp acpi_power_meter pcc_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ahci ata_generic pata_acpi ttm libahci crct10dif_pclmul pata_atiixp tg3 libata crct10dif_common drm crc32c_intel ptp serio_raw bnx2 r8169 hpsa pps_core i2c_core mii dm_mirror dm_region_hash dm_log dm_mod [ 788.465294] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W ------------ 3.10.0-327.el7.x86_64 #1 [ 788.511521] Hardware name: HP ProLiant DL385p Gen8, BIOS A28 12/17/2012 [ 788.542260] ffff880437c036b8 f7afc56532a53db9 ffff880437c03670 ffffffff816351f1 [ 788.576332] ffff880437c036a8 ffffffff8107b200 ffff880633e74200 ffff880231674000 [ 788.611943] 0000000000000001 0000000000000003 0000000000000000 ffff880437c03710 [ 788.647241] Call Trace: [ 788.658817] <IRQ> [<ffffffff816351f1>] dump_stack+0x19/0x1b [ 788.686193] [<ffffffff8107b200>] warn_slowpath_common+0x70/0xb0 [ 788.713803] [<ffffffff8107b29c>] warn_slowpath_fmt+0x5c/0x80 [ 788.741314] [<ffffffff812f92f3>] ? ___ratelimit+0x93/0x100 [ 788.767018] [<ffffffff81637f49>] skb_warn_bad_offload+0xcd/0xda [ 788.796117] [<ffffffff8152950c>] skb_checksum_help+0x17c/0x190 [ 788.823392] [<ffffffffa01463a1>] netem_enqueue+0x741/0x7c0 [sch_netem] [ 788.854487] [<ffffffff8152cb58>] dev_queue_xmit+0x2a8/0x570 [ 788.880870] [<ffffffff8156ae1d>] ip_finish_output+0x53d/0x7d0 ... The problem occurs because netem is not prepared to handle GSO packets (as it uses skb_checksum_help in its enqueue path, which cannot manipulate these frames). The solution I think is to simply segment the skb in a simmilar fashion to the way we do in __dev_queue_xmit (via validate_xmit_skb), with some minor changes. When we decide to corrupt an skb, if the frame is GSO, we segment it, corrupt the first segment, and enqueue the remaining ones. tested successfully by myself on the latest net kernel, to which this applies [js] backport to 3.12: no qdisc_qstats_drop yet, update directly. Also use qdisc_tree_decrease_qlen instead of qdisc_tree_reduce_backlog. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: "David S. Miller" <davem@davemloft.net> CC: netem@lists.linux-foundation.org CC: eric.dumazet@gmail.com CC: stephen@networkplumber.org Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 18 May, 2016 10 commits
-
-
Eric Dumazet authored
[ Upstream commit fc96256c ] When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Paolo Abeni authored
[ Upstream commit 391a2033 ] After commit fbd40ea0 ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Ben Hutchings authored
[ Upstream commit f43bfaed ] atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: Justin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Mathias Krause authored
[ Upstream commit 309cf37f ] Because we miss to wipe the remainder of i->addr[] in packet_mc_add(), pdiag_put_mclist() leaks uninitialized heap bytes via the PACKET_DIAG_MCLIST netlink attribute. Fix this by explicitly memset(0)ing the remaining bytes in i->addr[]. Fixes: eea68e2f ("packet: Report socket mclist info via diag module") Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Chris Friesen authored
[ Upstream commit d6d5e999 ] For local routes that require a particular output interface we do not want to cache the result. Caching the result causes incorrect behaviour when there are multiple source addresses on the interface. The end result being that if the intended recipient is waiting on that interface for the packet he won't receive it because it will be delivered on the loopback interface and the IP_PKTINFO ipi_ifindex will be set to the loopback interface as well. This can be tested by running a program such as "dhcp_release" which attempts to inject a packet on a particular interface so that it is received by another program on the same board. The receiving process should see an IP_PKTINFO ipi_ifndex value of the source interface (e.g., eth1) instead of the loopback interface (e.g., lo). The packet will still appear on the loopback interface in tcpdump but the important aspect is that the CMSG info is correct. Sample dhcp_release command line: dhcp_release eth1 192.168.204.222 02:11:33:22:44:66 Signed-off-by: Allain Legacy <allain.legacy@windriver.com> Signed off-by: Chris Friesen <chris.friesen@windriver.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
David S. Miller authored
[ Upstream commit a36a0d40 ] In particular, make sure we check for decnet private presence for loopback devices. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Paolo Abeni authored
[ Upstream commit 626abd59 ] Currently, when creating or updating a route, no check is performed in both ipv4 and ipv6 code to the hoplimit value. The caller can i.e. set hoplimit to 256, and when such route will be used, packets will be sent with hoplimit/ttl equal to 0. This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4 ipv6 route code, substituting any value greater than 255 with 255. This is consistent with what is currently done for ADVMSS and MTU in the ipv4 code. [js] backport to 3.12: no ip6_convert_metrics yet, fix applied to ip6_route_add directly. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Tony Lindgren authored
commit d8a50941 upstream. We get a NULL pointer dereference on omap3 for thumb2 compiled kernels: Internal error: Oops: 80000005 [#1] SMP THUMB2 ... [<c046497b>] (_raw_spin_unlock_irqrestore) from [<c0024375>] (omap3_enter_idle_bm+0xc5/0x178) [<c0024375>] (omap3_enter_idle_bm) from [<c0374e63>] (cpuidle_enter_state+0x77/0x27c) [<c0374e63>] (cpuidle_enter_state) from [<c00627f1>] (cpu_startup_entry+0x155/0x23c) [<c00627f1>] (cpu_startup_entry) from [<c06b9a47>] (start_kernel+0x32f/0x338) [<c06b9a47>] (start_kernel) from [<8000807f>] (0x8000807f) The power management related assembly on omaps needs to interact with ARM mode bootrom code, so we need to keep most of the related assembly in ARM mode. Turns out this error is because of missing ENDPROC for assembly code as suggested by Stephen Boyd <sboyd@codeaurora.org>. Let's fix the problem by adding ENDPROC in two places to sleep34xx.S. Let's also remove the now duplicate custom code for mode switching. This has been unnecessary since commit 6ebbf2ce ("ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+"). And let's also remove the comments about local variables, they are now just confusing after the ENDPROC. The reason why ENDPROC makes a difference is it sets .type and then the compiler knows what to do with the thumb bit as explained at: https://wiki.ubuntu.com/ARM/Thumb2PortingHowtoReported-by: Kevin Hilman <khilman@kernel.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Daniel Vetter authored
commit 2700818a upstream. LPT is pch, so might run into the fdi bandwidth constraint (especially since it has only 2 lanes). But right now we just force pipe_bpp back to 24, resulting in a nice loop (which we bail out with a loud WARN_ON). Fix this. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=93477Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1462264381-7573-1-git-send-email-daniel.vetter@ffwll.ch (cherry picked from commit f58a1acc) Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Lucas Stach authored
commit e3c00d87 upstream. On DCE6.1 PPLL2 is exclusively available to UNIPHYA, so it should not be taken into consideration when looking for an already enabled PLL to be shared with other outputs. This fixes the broken VGA port (TRAVIS DP->VGA bridge) on my Richland based laptop, where the internal display is connected to UNIPHYA through a TRAVIS DP->LVDS bridge. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78987 v2: agd: add check in radeon_get_shared_nondp_ppll as well, drop extra parameter. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
- 16 May, 2016 4 commits
-
-
Andi Kleen authored
commit a99aa42d upstream. Mark variables referenced from assembler files visible. This fixes compile problems with LTO. Cc: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391845930-28580-4-git-send-email-ak@linux.intel.comSigned-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Christoph Biedl <linux-kernel.bfrz@manchmal.in-ulm.de> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Marek Szyprowski authored
commit 6ae645d5 upstream. NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 104594b0 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Al Viro authored
commit 99d82582 upstream. Payloads of NM entries are not supposed to contain NUL. When we run into such, only the part prior to the first NUL goes into the concatenation (i.e. the directory entry name being encoded by a bunch of NM entries). We do stop when the amount collected so far + the claimed amount in the current NM entry exceed 254. So far, so good, but what we return as the total length is the sum of *claimed* sizes, not the actual amount collected. And that can grow pretty large - not unlimited, since you'd need to put CE entries in between to be able to get more than the maximum that could be contained in one isofs directory entry / continuation chunk and we are stop once we'd encountered 32 CEs, but you can get about 8Kb easily. And that's what will be passed to readdir callback as the name length. 8Kb __copy_to_user() from a buffer allocated by __get_free_page() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-
Herbert Xu authored
commit 13f4bb78 upstream. The crypto hash walk code is broken when supplied with an offset greater than or equal to PAGE_SIZE. This patch fixes it by adjusting walk->pg and walk->offset when this happens. Reported-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jiri Slaby <jslaby@suse.cz>
-