- 27 Jun, 2019 1 commit
-
-
git://git.armlinux.org.uk/~rmk/linux-armDave Airlie authored
TDA998x updates: - improve the driver's approach to audio, adding support for more I2S based formats, particularly other justifications, and preparing the driver to support other bclk ratios. - add support for pixel repeated modes, tested with a Panasonic TV. - correct the quantisation range handling; in particular, do not send full range RGB to the sink when the sink does not support full range RGB. - Send the HDMI vendor info frame when required. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Russell King <rmk@armlinux.org.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190625125005.GA31503@rmk-PC.armlinux.org.uk
-
- 25 Jun, 2019 4 commits
-
-
Andres Rodriguez authored
Replace the duplicated versions of the while loop with the new macro. Signed-off-by:
Andres Rodriguez <andresx7@gmail.com> Reviewed-by:
-
Andres Rodriguez authored
DisplayID blocks allow embedding of CEA blocks. The payloads are identical to traditional top level CEA extension blocks, but the header is slightly different. This change allows the CEA parser to find a CEA block inside a DisplayID block. Additionally, it adds support for parsing the embedded CTA header. No further changes are necessary due to payload parity. This change fixes audio support for the Valve Index HMD. Signed-off-by:
-
git://anongit.freedesktop.org/tegra/linuxDave Airlie authored
drm/tegra: Changes for v5.3-rc1 This contains a couple of small improvements and cleanups for the Tegra DRM driver. Signed-off-by:
-
git://linux-arm.org/linux-ldDave Airlie authored
Picking up pace on the upstreaming of Komeda driver, with quite a lot of new features added this time. On top of that we have the small cleanups and improved usage of the debugfs functions. Please pull! Signed-off-by:
-
- 21 Jun, 2019 5 commits
-
-
Ayan Halder authored
Komeda interrupts may be shared with other hardware blocks. One needs to use devm_request_irq() with IRQF_SHARED to create a shared interrupt handler. As a result of not using drm_irq_install() api, one needs to set "(struct drm_device *)->irq_enabled = true/false" to enable/disable vblank interrupts. Changes from v1:- 1. Squashed the following two patches into one (as the second patch is a consequence of the first one):- drm/komeda: Avoid using DRIVER_IRQ_SHARED drm/komeda: Enable/Disable vblank interrupts 2. Fixed the commit message (as pointed by Daniel Vetter) 3. Removed calls to 'drm_irq_uninstall()' as we are no longer using drm_irq_install() 4. Removed the struct member 'komeda_kms_driver.irq_handler' as it is not used anywhere. Signed-off-by:
Ayan Halder <ayan.halder@arm.com> Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com>
-
Arnd Bergmann authored
clang points out a bug in the clock calculation on 32-bit, that leads to the clock_ratio always being zero: drivers/gpu/drm/arm/display/komeda/komeda_crtc.c:31:36: error: shift count >= width of type [-Werror,-Wshift-count-overflow] aclk = komeda_calc_aclk(kcrtc_st) << 32; Move the shift into the division to make it apply on a 64-bit variable. Also use the more expensive div64_u64() instead of div_u64() to account for pxlclk being a 64-bit integer. Fixes: 1f7f9ab7 ("drm/komeda: Add engine clock requirement check for the downscaling") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Features: - HDR support (Uma, Ville) - Add I2C symlink under HDMI connector similar to DP (Oleg) - Add ICL multi-segmented gamma support (Shashank, Uma) - Update register whitelist support for new hardware (Robert, John) - GuC firmware update with updated ABI interface (Michal, Oscar) - Add support for new DMC header versions (Lucas) - In-kernel blitter client for selftest use (Matthew) - Add Mule Creec Canyon (MCC) PCH support to go with EHL (Matt) - EHL platform feature updates (Matt) - Use Command Transport Buffers with GuC on all gens (Daniele) - New i915.force_probe module parameter to replace i915.alpha_support (Jani) Refactoring: - Better runtime PM code abstraction/encapsulation (Daniele) - VBT parsing cleanup and improvements (Jani) - Move display code to its own subdirectory (Jani) - Header cleanup (Jani, Daniele) - Prep work for subsclice mask expansion (Stuart) - Use uncore mmio register accessors more, remove unused macro wrappers (Tvrtko) - Remove unused atomic property get/set stubs (Maarten) - GTT cleanups and improvements (Mika) - Pass intel_ types instead of drm_ types in plenty of display code (Ville) - Engine reset, hangcheck, fault code cleanups and improvements (Tvrtko) - Consider AML variants simply as either KBL or CFL ULX (Ville) - State checker cleanups and improvements (Ville) - GEM code reorganization to more files under gem subdirectory (Chris) - Reducing dependency on a coarse struct_mutex (Chris) Fixes: - Fix use of uninitialized/incorrect error pointers (Colin, Dan) - Fix DSI fastboot on some VLV/CHV platforms (Hans) - Fix DSI error path (Hans) - Add ICL port A combo PHY HW state check (Imre) - Fix ICL AUX-B HW not done issue (Imre) - Fix perf whitelist on gen10+ (Lionel) - Fix PSR exit by forcing manual exit on older gens (José) - Match voltage ranges instead of exact values (Lucas) - Fix SDVO HDMI audio, with cleanups (Ville) - Fix plane state dumps (Ville) - Fix driver cleanup code to support driver hot unbind (Janusz) - Add checks for ICL memory bandwidth requirements (Ville) - Fix toggling between no C8 planes vs. at least one C8 plane (Ville) - Improved checks on PLL usage conditions, refactoring (Ville) - Avoid clobbering M/N values in fastset fuzzy checks (Ville) - Take a runtime pm wakeref for atomic commits (Chris) - Do not allow runtime pm autosuspend to remove userspace GGTT mmaps too quickly (Chris) - Avoid refcount_inc on known zero count to avoid debug flagging (Chris) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.3: UAPI Changes: - Give each dma-buf their own inode, add DMA_BUF_SET_NAME ioctl and a show_fdinfo handler. Cross-subsystem Changes: - Pull in the topic/remove-fbcon-notifiers branch: * remove fbdev notifier usage for fbcon, as prep work to clean up the fbcon locking * assorted locking checks in vt/console code * assorted notifier and cleanups in fbdev and backlight code Core Changes: - Make drm_debugfs_create_files() never fail. - add debug print to update_vblank_count. - Add DP_DPCD_QUIRK_NO_SINK_COUNT quirk. - Add todo item for drm_gem_objects. - Unexport drm_gem_(un)pin/v(un)map. - Document struct drm_cmdline_mode. - Rewrite the command handler for mode names, and add support to specify rotation, reflection and overscan. With a new selftest! :) - Fixes to drm/client for improving rotation support, and fixing variable scope. - Small fixes to self refresh helper. Driver Changes: - Add rockchip RK3328 support. - Assorted driver fixes to rockchip, vc4, rcar-du, vkms. - Expose panfrost performance counters through unstable ioctl's, hidden behind a module parameter. - Enumerate CRC sources list in vkms. - Add a basic kms driver for the Ingenic JZ47xx SoC, which will be expanded soon with more advanced features. - Suspend/resume fix for stm. Signed-off-by:
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
- The coherent memory changes including mm changes. - Some vmwgfx debug fixes. - Removal of vmwgfx legacy security checks. Signed-off-by:
-
- 20 Jun, 2019 3 commits
-
-
Daniel Vetter authored
I rushed merging this a bit too much, and Noralf pointed out that we're a lot better already and have made great progress. Let's try again. v2: Fix typo spotted by Eric Engestrom. Fixes: 8db420ac ("drm/todo: Improve drm_gem_object funcs todo") Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Eric Anholt <eric@anholt.net> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618140241.19856-1-daniel.vetter@ffwll.ch
-
Yannick Fertré authored
Without this fix, the system can not go in "suspend" mode due to an error in drv_suspend function. Fixes: 35ab6cfb ("drm/stm: support runtime power management") Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1560755897-5002-1-git-send-email-yannick.fertre@st.com
-
Sean Paul authored
If state allocation fails, we still try to give back the reference on it. Also initialize ret in case the crtc is not enabled and we hit the eject button. Fixes: 1452c25b ("drm: Add helpers to kick off self refresh mode in drivers") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190619181951.192305-1-sean@poorly.run
-
- 19 Jun, 2019 27 commits
-
-
Warnings popup when "make ARCH=i386" In file included from include/drm/drm_mm.h:49, from include/drm/drm_vma_manager.h:26, from include/drm/drm_gem.h:40, from drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:9: drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c: In function 'komeda_fb_afbc_size_check': drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c:96:17: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'size_t' {aka 'unsigned int'} [-Werror=format=] DRM_DEBUG_KMS("afbc size check failed, obj_size: 0x%lx. min_size 0x%x.\n", That leads by misuse "%lx" as format speicifier for size_t, correct it to "%zx" Reported-by:kbuild test robot <lkp@intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Dan Carpenter authored
This test is flipped around so it either leads to a memory leak or a NULL dereference. Fixes: 1452c25b ("drm: Add helpers to kick off self refresh mode in drivers") Signed-off-by:
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Chris Wilson authored
Since commit eb8d0f5a ("drm/i915: Remove GPU reset dependence on struct_mutex"), the I915_WAIT_LOCKED flags passed to i915_request_wait() has been defunct. Now go ahead and remove it from all callers. References: eb8d0f5a ("drm/i915: Remove GPU reset dependence on struct_mutex") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618074153.16055-3-chris@chris-wilson.co.uk
-
Paul Cercueil authored
Add a KMS driver for the Ingenic JZ47xx family of SoCs. This driver is meant to replace the aging jz4740-fb driver. This driver does not make use of the simple pipe helper, for the reason that it will soon be updated to support more advanced features like multiple planes, IPU integration for colorspace conversion and up/down scaling, support for DSI displays, and TV-out and HDMI outputs. Notes: v2: - Remove custom handling of panel. The panel is now discovered using the standard API. - Lots of small tweaks suggested by upstream v3: - Use devm_drm_dev_init() - Update compatible strings to -lcd instead of -drm - Add destroy() callbacks to plane and crtc - The ingenic,lcd-mode is now read from the bridge's DT node v4: Remove ingenic,lcd-mode property completely. The various modes are now deduced from the connector type, the pixel format or the bus flags. v5: - Fix framebuffer size incorrectly calculated for 24bpp framebuffers - Use 32bpp framebuffer instead of 16bpp, as it'll work with both 16-bit and 24-bit panel - Get rid of drm_format_plane_cpp() which has been dropped upstream - Avoid using drm_format_info->depth, which is deprecated. Signed-off-by:Paul Cercueil <paul@crapouillou.net> Tested-by:
Artur Rojek <contact@artur-rojek.eu> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Paul Cercueil authored
Add documentation for the devicetree bindings of the LCD controller present in the JZ47xx family of SoCs from Ingenic. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chris Wilson authored
The process_csb routine from execlists_submission is incompatible with the GuC backend. Add a warning to detect if we accidentally end up in the wrong spot. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190618110736.31155-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
The idea behind keeping the saturation mask local to a context backfired spectacularly. The premise with the local mask was that we would be more proactive in attempting to use semaphores after each time the context idled, and that all new contexts would attempt to use semaphores ignoring the current state of the system. This turns out to be horribly optimistic. If the system state is still oversaturated and the existing workloads have all stopped using semaphores, the new workloads would attempt to use semaphores and be deprioritised behind real work. The new contexts would not switch off using semaphores until their initial batch of low priority work had completed. Given sufficient backload load of equal user priority, this would completely starve the new work of any GPU time. To compensate, remove the local tracking in favour of keeping it as global state on the engine -- once the system is saturated and semaphores are disabled, everyone stops attempting to use semaphores until the system is idle again. One of the reason for preferring local context tracking was that it worked with virtual engines, so for switching to global state we could either do a complete check of all the virtual siblings or simply disable semaphores for those requests. This takes the simpler approach of disabling semaphores on virtual engines. The downside is that the decision that the engine is saturated is a local measure -- we are only checking whether or not this context was scheduled in a timely fashion, it may be legitimately delayed due to user priorities. We still have the same dilemma though, that we do not want to employ the semaphore poll unless it will be used. v2: Explain why we need to assume the worst wrt virtual engines. Fixes: ca6e56f6 ("drm/i915: Disable semaphore busywaits on saturated systems") Signed-off-by:
-
Writeback split is also for workaround the size limitation of d71 scaler. Like layer_split, writeback downscaling also can use two scalers to handle the scaling half-by-half. The only differnence is writback needs a standalone component (splitter)'s help to split the composition result. The data pipeline of writeback split as below: /-> scaler-0 ->\ compiz -> splitter merger -> wb_layer -> memory \-> scaler-1 ->/ v2: Rebase Signed-off-by: -
Similar to Layer Split, but Splitter is used for writeback, which splits the compiz result to two half parts and then feed them to two scalers. v2: Rebase Signed-off-by:
-
User may send null writeback configurations for writeback connector like: - Only bind the writeback connector to crtc. - set a fb_id(0) to writeback_fb_id_property All above configurations are meaningless for writeback, but since they are still valid configurations, accept them. Depends on: - https://patchwork.freedesktop.org/series/60856/Signed-off-by:
-
Since the component_state->input[i] is only valid when it is active, the content of input[i] is undefined if it is inactive. The user must check the state->active_inputs with input index firstly before using state->input[i]. Refine the function to_d71_input_id and directly move such check into it. Simplify the using and avoid problem that caller forget the valid check. Depends on: - https://patchwork.freedesktop.org/series/60856/Signed-off-by:
-
Lowry Li (Arm Technology China) authored
One crtc can use two komeda_pipeline, and one works as master and as slave. the slave pipeline doesn't have its own output and timing ctrlr, but pre-composite the input layer data flow and then feed the result to master. the pipeline configuration like: slave-layer-0 \ ... slave->CU slave-layer-4 / \ \ master-layer-0 --------> master->CU -> ... ... / master-layer-4 ------> Since komeda Compiz doesn't output alpha, so the slave->CU result only can be used as bottom input when blend it with master input data flows. Signed-off-by:Lowry Li (Arm Technology China) <lowry.li@arm.com> Reviewed-by:
-
Komeda supports two types of layer split: - none-scaling split - scaling split Since D71 merger only support scaler as input, so for none-scaling split, the two layer dflow will be output to compiz directly. for scaling_split, the data flow will be merged by merger firstly, then output the merged data flow to compiz. Komeda handles the split in kernel completely to hide the detailed and complicated split calcualtion to user mode, for user only need to set the layer_split property to enable/disable it. v2: Rebase Signed-off-by:
-
To achieve same caling effect compare with none split, the texel calculation need to use the same scaling ratio before split, so add "total_xxx" to pipeline to describe the hsize/vsize before split. Update pipeline and d71_scaler_update accordingly. v2: Rebase and addressed Liviu's comments Signed-off-by:
-
Introduce a new component komeda_merger, because D71 HW supports to split a whole image to two half parts and does the scaling independently. Merger merges two separate results to one, and output it to compositor or wb_layer For this patch: - Add the definition of komeda_merger/merger_state - Report and initialize komeda_merger according to the D71 HW. v2: Rebase Signed-off-by:
-
Current komeda driver uses three dedicated clks for a specific purpose: - mclk: main engine clock - pclk: APB clock - pipeline->aclk: AXI clock. But per spec the komeda HW only has three input clks: - ACLK: used for AXI masters, APB slave and most pipeline processing - PXCLK for pipeline 0: output pixel clock for pipeline 0 - PXCLK for pipeline 1: output pixel clock for pipeline 1 So one ACLK is enough, no need to split it to three mclk/pclk/axiclk. Signed-off-by:
-
To avoid confusion, unify the driver main engine clk name "mclk" to the spec name "aclk". Signed-off-by:
-
Current komeda driver uses three dedicated clks for a specific purpose: - mclk: main engine clock - pclk: APB clock - pipeline->aclk: AXI clock. But per spec the komeda HW only has three input clks: - ACLK: used for AXI masters, APB slave and most pipeline processing - PXCLK for pipeline 0: output pixel clock for pipeline 0 - PXCLK for pipeline 1: output pixel clock for pipeline 1 So one ACLK is enough, no need to split it to three mclk/pclk/axiclk. drop pclk/pipeline->axiclk. but only keep one mclk in komeda driver. Signed-off-by:
-
Lowry Li (Arm Technology China) authored
- Creates the zpos property. - Implement komeda_crtc_normalize_zpos to replace drm_atomic_normalize_zpos, reasons as the following: 1. The drm_atomic_normalize_zpos allows to configure same zpos for different planes, but komeda doesn't support such configuration. 2. For further slave pipline case, Komeda need to calculate the max_slave_zorder, we will merge such calculation into komed_crtc_normalize_zpos to save a separated plane_state loop. 3. For feature none-scaling layer_split, which a plane_state will be assigned to two individual layers(left/right), which requires two normalize_zpos for this plane, plane_st->normalize_zpos will be used by left layer, normalize_zpos + 1 for right_layer. This patch series depends on: - https://patchwork.freedesktop.org/series/58710/ - https://patchwork.freedesktop.org/series/59000/ - https://patchwork.freedesktop.org/series/59002/ - https://patchwork.freedesktop.org/series/59747/ - https://patchwork.freedesktop.org/series/59915/ - https://patchwork.freedesktop.org/series/60083/ - https://patchwork.freedesktop.org/series/60698/Signed-off-by:
-
- Y0L2 and P010 are block (tiled) format, Update the kemeda logic to compatible with such block format. - Since DRM introduced a general block information to drm_format_info, the format_caps->tiled_size no long needed, delete it. - Build some fb utils functions for code sharing. Signed-off-by:
-
Add komeda_fb_check_src_coords and check if the layer configured src rect can meet the requirement of fb and fb format. Signed-off-by:
-
Lowry Li (Arm Technology China) authored
Updates the device-tree doc about how to enable SMMU by devicetree. Signed-off-by:
-
Lowry Li (Arm Technology China) authored
Adds iommu_connect and disconnect for SMMU support, and configures TBU translation once SMMU has been attached to the display device. Signed-off-by:
-
Lowry Li (Arm Technology China) authored
Adds color-encoding properties if layer can support YUV format. Updates HW YUV-RGB matrix state according to the color-encoding properties. Signed-off-by:
-
