Robert O'Callahan reported that after an execve PTRACE_GETREGSET
NT_X86_XSTATE continues to return the pre-exec register values
until the exec'ed task modifies FPU state.

The test code is at:

  https://bugzilla.redhat.com/attachment.cgi?id=1164286.

What is happening is fpu__clear() does not properly clear fpstate.
Fix it by doing just that.
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1479402695-6553-1-git-send-email-yu-cheng.yu@intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Linux will have all kinds of sporadic problems on systems that don't
have the CPUID instruction unless CONFIG_M486=y.  In particular,
sync_core() will explode.

I believe that these kernels had a better chance of working before
commit 05fb3c19 ("x86/boot: Initialize FPU and X86_FEATURE_ALWAYS
even if we don't have CPUID").  That commit inadvertently fixed a
serious bug: we used to fail to detect the FPU if CPUID wasn't
present.  Because we also used to forget to set X86_FEATURE_ALWAYS, we
end up with no cpu feature bits set at all.  This meant that
alternative patching didn't do anything and, if paravirt was disabled,
we could plausibly finish the entire boot process without calling
sync_core().

Rather than trying to work around these issues, just have the kernel
fail loudly if it's running on a CPUID-less 486, doesn't have CPUID,
and doesn't have CONFIG_M486 set.
Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/70eac6639f23df8be5fe03fa1984aedd5d40077a.1479598603.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

On the 80486 DX, it seems that some exceptions may leave garbage in
the high bits of CS.  This causes sporadic failures in which
early_fixup_exception() refuses to fix up an exception.

As far as I can tell, this has been buggy for a long time, but the
problem seems to have been exacerbated by commits:

  1e02ce4c ("x86: Store a per-cpu shadow copy of CR4")
  e1bfc11c ("x86/init: Fix cr4_init_shadow() on CR4-less machines")

This appears to have broken for as long as we've had early
exception handling.

[ Note to stable maintainers: This patch is needed all the way back to 3.4,
  but it will only apply to 4.6 and up, as it depends on commit:

    0e861fbb ("x86/head: Move early exception panic code into early_fixup_exception()")

  If you want to backport to kernels before 4.6, please don't backport the
  prerequisites (there was a big chain of them that rewrote a lot of the
  early exception machinery); instead, ask me and I can send you a one-liner
  that will apply. ]
Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Fixes: 4c5023a3 ("x86-32: Handle exception table entries during early boot")
Link: http://lkml.kernel.org/r/cb32c69920e58a1a58e7b5cad975038a69c0ce7d.1479609510.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The oops stack dump code scans the entire stack, which can cause KASAN
"stack-out-of-bounds" false positive warnings.  Tell KASAN to ignore it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: davej@codemonkey.org.uk
Cc: dvyukov@google.com
Link: http://lkml.kernel.org/r/5f6e80c4b0c7f7f0b6211900847a247cdaad753c.1479398226.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The guess unwinder scans the entire stack, which can cause KASAN
"stack-out-of-bounds" false positive warnings.  Tell KASAN to ignore it.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: davej@codemonkey.org.uk
Cc: dvyukov@google.com
Link: http://lkml.kernel.org/r/61939c0b2b2d63ce97ba59cba3b00fd47c2962cf.1479398226.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The latest binutils are warning about a .fill directive with an explicit
value in a .bss section:

  arch/x86/kernel/head_32.S: Assembler messages:
  arch/x86/kernel/head_32.S:677: Warning: ignoring fill value in section `.bss..page_aligned'
  arch/x86/kernel/head_32.S:679: Warning: ignoring fill value in section `.bss..page_aligned'

This comes from the 'ENTRY()' macro padding the space between the symbols
with 'nop' via:

  .align 4,0x90

Open-coding the .globl directive without the padding avoids that warning,
as all the symbols are already page aligned.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161116141726.2013389-1-arnd@arndb.deSigned-off-by: Ingo Molnar <mingo@kernel.org>

The screen_info.lfb_size field is shifted by 16 bits *only* in case of
VBE. This has historical reasons since VBE advertised it similarly.
However, in case of EFI framebuffers, the size is no longer shifted. Fix
the x86 simple-framebuffer setup code to use the correct size in the
non-VBE case.

While at it, avoid variable abbreviations and rename 'len' to 'length',
and use the correct types matching the screen_info definition.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Gundersen <teg@jklm.no>
Link: http://lkml.kernel.org/r/20161115120158.15388-3-dh.herrmann@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

The screen_info object was extended to support 64-bit lfb_base addresses
in:

  ae2ee627 ("efifb: Add support for 64-bit frame buffer addresses")

However, the x86 simple-framebuffer setup code never made use of it. Fix
it to properly assemble and verify the lfb_base before advertising
simple-framebuffer devices.

In particular, this means if VIDEO_CAPABILITY_64BIT_BASE is set, the
screen_info->ext_lfb_base field will contain the upper 32bit of the
actual lfb_base. Make sure the address is not 0 (i.e., unset), as well as
does not overflow the physical address type.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tom Gundersen <teg@jklm.no>
Link: http://lkml.kernel.org/r/20161115120158.15388-2-dh.herrmann@gmail.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull tracing fixes from Steven Rostedt:
 "Alexei discovered a race condition in modules failing to load that can
  cause a ftrace check to trigger and disable ftrace.

  This is because of the way modules are registered to ftrace. Their
  functions are loaded in the ftrace function tables but set to
  "disabled" since they are still in the process of being loaded by the
  module. After the module is finished, it calls back into the ftrace
  infrastructure to enable it.

  Looking deeper into the locations that access all the functions in the
  table, I found more locations that should ignore the disabled ones"

* tag 'trace-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Add more checks for FTRACE_FL_DISABLED in processing ip records
  ftrace: Ignore FTRACE_FL_DISABLED while walking dyn_ftrace records

Pull fbdev fix from Tomi Valkeinen:
 "Fix CLCD regression on Vexpress"

* tag 'fbdev-fixes-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: ARM CLCD: fix Vexpress regression

Pull networking fixes from David Miller:

 1) Fix off by one wrt. indexing when dumping /proc/net/route entries,
    from Alexander Duyck.

 2) Fix lockdep splats in iwlwifi, from Johannes Berg.

 3) Cure panic when inserting certain netfilter rules when NFT_SET_HASH
    is disabled, from Liping Zhang.

 4) Memory leak when nft_expr_clone() fails, also from Liping Zhang.

 5) Disable UFO when path will apply IPSEC tranformations, from Jakub
    Sitnicki.

 6) Don't bogusly double cwnd in dctcp module, from Florian Westphal.

 7) skb_checksum_help() should never actually use the value "0" for the
    resulting checksum, that has a special meaning, use CSUM_MANGLED_0
    instead. From Eric Dumazet.

 8) Per-tx/rx queue statistic strings are wrong in qed driver, fix from
    Yuval MIntz.

 9) Fix SCTP reference counting of associations and transports in
    sctp_diag. From Xin Long.

10) When we hit ip6tunnel_xmit() we could have come from an ipv4 path in
    a previous layer or similar, so explicitly clear the ipv6 control
    block in the skb. From Eli Cooper.

11) Fix bogus sleeping inside of inet_wait_for_connect(), from WANG
    Cong.

12) Correct deivce ID of T6 adapter in cxgb4 driver, from Hariprasad
    Shenai.

13) Fix potential access past the end of the skb page frag array in
    tcp_sendmsg(). From Eric Dumazet.

14) 'skb' can legitimately be NULL in inet{,6}_exact_dif_match(). Fix
    from David Ahern.

15) Don't return an error in tcp_sendmsg() if we wronte any bytes
    successfully, from Eric Dumazet.

16) Extraneous unlocks in netlink_diag_dump(), we removed the locking
    but forgot to purge these unlock calls. From Eric Dumazet.

17) Fix memory leak in error path of __genl_register_family(). We leak
    the attrbuf, from WANG Cong.

18) cgroupstats netlink policy table is mis-sized, from WANG Cong.

19) Several XDP bug fixes in mlx5, from Saeed Mahameed.

20) Fix several device refcount leaks in network drivers, from Johan
    Hovold.

21) icmp6_send() should use skb dst device not skb->dev to determine L3
    routing domain. From David Ahern.

22) ip_vs_genl_family sets maxattr incorrectly, from WANG Cong.

23) We leak new macvlan port in some cases of maclan_common_netlink()
    errors. Fix from Gao Feng.

24) Similar to the icmp6_send() fix, icmp_route_lookup() should
    determine L3 routing domain using skb_dst(skb)->dev not skb->dev.
    Also from David Ahern.

25) Several fixes for route offloading and FIB notification handling in
    mlxsw driver, from Jiri Pirko.

26) Properly cap __skb_flow_dissect()'s return value, from Eric Dumazet.

27) Fix long standing regression in ipv4 redirect handling, wrt.
    validating the new neighbour's reachability. From Stephen Suryaputra
    Lin.

28) If sk_filter() trims the packet excessively, handle it reasonably in
    tcp input instead of exploding. From Eric Dumazet.

29) Fix handling of napi hash state when copying channels in sfc driver,
    from Bert Kenward.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (121 commits)
  mlxsw: spectrum_router: Flush FIB tables during fini
  net: stmmac: Fix lack of link transition for fixed PHYs
  sctp: change sk state only when it has assocs in sctp_shutdown
  bnx2: Wait for in-flight DMA to complete at probe stage
  Revert "bnx2: Reset device during driver initialization"
  ps3_gelic: fix spelling mistake in debug message
  net: ethernet: ixp4xx_eth: fix spelling mistake in debug message
  ibmvnic: Fix size of debugfs name buffer
  ibmvnic: Unmap ibmvnic_statistics structure
  sfc: clear napi_hash state when copying channels
  mlxsw: spectrum_router: Correctly dump neighbour activity
  mlxsw: spectrum: Fix refcount bug on span entries
  bnxt_en: Fix VF virtual link state.
  bnxt_en: Fix ring arithmetic in bnxt_setup_tc().
  Revert "include/uapi/linux/atm_zatm.h: include linux/time.h"
  tcp: take care of truncations done by sk_filter()
  ipv4: use new_gw for redirect neigh lookup
  r8152: Fix error path in open function
  net: bpqether.h: remove if_ether.h guard
  net: __skb_flow_dissect() must cap its return value
  ...

Pull arch/tile bugfix from Chris Metcalf:
 "This just fixes an incompatibility with tile __ro_after_init"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: handle __ro_after_init like parisc does

Pull RTC fixes from Alexandre Belloni:
 "Here are a few driver fixes for 4.9. It has been calm for a while so I
  don't expect more for this cycle.

  Drivers:
   - asm9260: fix module autoload
   - cmos: fix crashes
   - omap: fix clock handling"

* tag 'rtc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: omap: prevent disabling of clock/module during suspend
  rtc: omap: Fix selecting external osc
  rtc: cmos: Don't enable interrupts in the middle of the interrupt handler
  rtc: cmos: remove all __exit_p annotations
  rtc: asm9260: fix module autoload

The tile architecture already marks RO_DATA as read-only in
the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is
done by default, means the kernel faults in init when it tries
to write to RO_AFTER_INIT_DATA.  For now, just arrange that
__ro_after_init is handled like __write_once, i.e. __read_mostly.
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>

Since commit b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications
instead of switchdev calls") we reflect to the device the entire FIB
table and not only FIBs that point to netdevs created by the driver.

During module removal, FIBs of the second type are removed following
NETDEV_UNREGISTER events sent. The other FIBs are still present in both
the driver's cache and the device's table.

Fix this by iterating over all the FIB tables in the device and flush
them. There's no need to take locks, as we're the only writer.

Fixes: b45f64d1 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 52f95bbf ("stmmac: fix adjust link call in case of a switch
is attached") added some logic to avoid polling the fixed PHY and
therefore invoking the adjust_link callback more than once, since this
is a fixed PHY and link events won't be generated.

This works fine the first time, because we start with phydev->irq =
PHY_POLL, so we call adjust_link, then we set phydev->irq =
PHY_IGNORE_INTERRUPT and we stop polling the PHY.

Now, if we called ndo_close(), which calls both phy_stop() and does an
explicit netif_carrier_off(), we end up with a link down. Upon calling
ndo_open() again, despite starting the PHY state machine, we have
PHY_IGNORE_INTERRUPT set, and we generate no link event at all, so the
link is permanently down.

Fixes: 52f95bbf ("stmmac: fix adjust link call in case of a switch is attached")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a module is first loaded and its function ip records are added to the
ftrace list of functions to modify, they are set to DISABLED, as their text
is still in a read only state. When the module is fully loaded, and can be
updated, the flag is cleared, and if their's any functions that should be
tracing them, it is updated at that moment.

But there's several locations that do record accounting and should ignore
records that are marked as disabled, or they can cause issues.

Alexei already fixed one location, but others need to be addressed.

Cc: stable@vger.kernel.org
Fixes: b7ffffbb "ftrace: Add infrastructure for delayed enabling of module functions"
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ftrace_shutdown() checks for sanity of ftrace records
and if dyn_ftrace->flags is not zero, it will warn.
It can happen that 'flags' are set to FTRACE_FL_DISABLED at this point,
since some module was loaded, but before ftrace_module_enable()
cleared the flags for this module.

In other words the module.c is doing:
ftrace_module_init(mod); // calls ftrace_update_code() that sets flags=FTRACE_FL_DISABLED
... // here ftrace_shutdown() is called that warns, since
err = prepare_coming_module(mod); // didn't have a chance to clear FTRACE_FL_DISABLED

Fix it by ignoring disabled records.
It's similar to what __ftrace_hash_rec_update() is already doing.

Link: http://lkml.kernel.org/r/1478560460-3818619-1-git-send-email-ast@fb.com

Cc: stable@vger.kernel.org
Fixes: b7ffffbb "ftrace: Add infrastructure for delayed enabling of module functions"
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if
this sock has no connection (assoc), sk state would be changed to
SCTP_SS_CLOSING, which is not as we expect.

Besides, after that if users try to listen on this sock, kernel
could even panic when it dereference sctp_sk(sk)->bind_hash in
sctp_inet_listen, as bind_hash is null when sock has no assoc.

This patch is to move sk state change after checking sk assocs
is not empty, and also merge these two if() conditions and reduce
indent level.

Fixes: d46e416c ("sctp: sctp should change socket state when shutdown is received")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Baoquan He says:

====================
bnx2: Wait for in-flight DMA to complete at probe stage

This is v2 post.

In commit 3e1be7ad ("bnx2: Reset device during driver initialization"),
firmware requesting code was moved from open stage to probe stage.
The reason is in kdump kernel hardware iommu need device be reset in
driver probe stage, otherwise those in-flight DMA from 1st kernel
will continue going and look up into the newly created io-page tables.
However bnx2 chip resetting involves firmware requesting issue, that
need be done in open stage.

Michale Chan suggested we can just wait for the old in-flight DMA to
complete at probe stage, then though without device resetting, we
don't need to worry the old in-flight DMA could continue looking up
the newly created io-page tables.

v1->v2:
    Michael suggested to wait for the in-flight DMA to complete at probe
    stage. So give up the old method of trying to reset chip at probe
    stage, take the new way accordingly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In-flight DMA from 1st kernel could continue going in kdump kernel.
New io-page table has been created before bnx2 does reset at open stage.
We have to wait for the in-flight DMA to complete to avoid it look up
into the newly created io-page table at probe stage.
Suggested-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 3e1be7ad.

When people build bnx2 driver into kernel, it will fail to detect
and load firmware because firmware is contained in initramfs and
initramfs has not been uncompressed yet during do_initcalls. So
revert commit 3e1be7ad and work out a new way in the later patch.
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake "unmached" to "unmatched" in
debug message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit 022d00ee ("ASoC: lpass-platform: Fix broken pcm data
usage") the stream specific information initialization was broken, with
the dma channel information not being initialized if there was no
alloc_dma_channel() helper function.

Before that, the DMA channel number was implicitly initialized to zero
because the backing store was allocated with devm_kzalloc().  When the
init code was rewritten, that implicit initialization was lost, and gcc
rightfully complains about an uninitialized variable being used.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit bfd8d3f2.

It turns out that this flushes things much too aggressiverly, and causes
lines to break up when the system logger races with new continuation
lines being printed.

There's a pending patch to make printk() flushing much more
straightforward, but it's too invasive for 4.9, so in the meantime let's
just not make the system message logging flush continuation lines.
They'll be flushed by the final newline anyway.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This file was converted to a separate module at commit 7a0786c1
("gp8psk: Fix DVB frontend attach"), because the DVB attach routines
require it to work.  However, I forgot to copy the MODULE_foo() macros
from the original module, causing this warning:

    WARNING: modpost: missing MODULE_LICENSE() in drivers/media/dvb-frontends/gp8psk-fe.o
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 7a0786c1 ("gp8psk: Fix DVB frontend attach")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - fix an Intel/MID boot crash/hang bug

   - fix a cache topology mis-parsing bug on certain AMD CPUs

   - fix a virtualization firmware bug by adding a check+quirk
     workaround on the kernel side"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Deal with broken firmware (VMWare/XEN)
  x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems
  x86/platform/intel-mid: Retrofit pci_platform_pm_ops ->get_state hook

Pull irq fix from Ingo Molnar:
 "This fixes a genirq regression that resulted in the Intel/Broxton
  pinctrl/GPIO driver (and possibly others) spewing warnings"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Use irq type from irqdata instead of irqdesc

Pull perf fixes from Ingo Molnar:
 "An uncore PMU driver hardware enablement change for Intel SkyLake
  uncore PMUs (Skylake Y, U, H and S platforms), plus a number of
  tooling fixes for the histogram handling/displaying code"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Add more Intel uncore IMC PCI IDs for SkyLake
  perf hists: Fix column length on --hierarchy
  perf hists browser: Fix column indentation on --hierarchy
  perf hists browser: Show folded sign properly on --hierarchy
  perf hists browser: Fix indentation of folded sign on --hierarchy
  perf hist browser: Fix hierarchy column counts

Pull EFI fixes from Ingo Molnar:
 "A boot crash fix and a build warning fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y
  x86/efi: Fix EFI memmap pointer size warning

Pull NTB fixes from Jon Mason:
 "NTB bug fixes for ntb_hw_intel, ntb_perf, and ntb_pingpong.

  Also, a fixup to use jiffies in schedule_timeout_* call instead of a
  constant"

* tag 'ntb-4.9' of git://github.com/jonmason/ntb:
  ntb_perf: potential info leak in debugfs
  ntb: ntb_hw_intel: init peer_addr in struct intel_ntb_dev
  ntb: make DMA_OUT_RESOURCE_TO HZ independent
  ntb_transport: make DMA_OUT_RESOURCE_TO HZ independent
  NTB: ntb_hw_intel: Fix typo in module parameter descriptions
  ntb_pingpong: Fix db_init parameter description

This is a static checker warning, not something I'm desperately
concerned about.  But snprintf() returns the number of bytes that
would have been copied if there were space.  We really care about the
number of bytes that actually were copied so we should use scnprintf()
instead.

It probably won't overrun, and in that case we may as well just use
sprintf() but these sorts of things make static checkers and code
reviewers happier.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

The peer_addr member of intel_ntb_dev is not set, therefore when
acquiring ntb_peer_db and ntb_peer_spad we only get the offset rather
than the actual physical address. Adding fix to correct that.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

schedule_timeout_* takes a timeout in jiffies but the code currently is
passing in a constant which makes this timeout HZ dependent, so pass it
through msecs_to_jiffies() to fix this up.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

schedule_timeout_* takes a timeout in jiffies but the code currently is
passing in a constant which makes this timeout HZ dependent, so pass it
through msecs_to_jiffies() to fix this up.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Fix typo in module parameter descriptions.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Fix 'db_init' parameter description.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Trivial fix to spelling mistake "successed" to "succeeded"
in debug message.  Also unwrap multi-line literal string.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This mistake was causing debugfs directory creation
failures when multiple ibmvnic devices were probed.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This structure was mapped but never subsequently unmapped.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>