- 10 Jun, 2009 40 commits
-
-
Gleb Natapov authored
Back link is written to a wrong TSS now. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Avi Kivity <avi@redhat.com>
-
Gleb Natapov authored
We will need it later in task_switch(). Code in handle_exception() is dead. is_external_interrupt(vect_info) will always be false since idt_vectoring_info is zeroed in vmx_complete_interrupts(). Signed-off-by:
-
Gleb Natapov authored
...with a more straightforward switch(). Also fix a bug when NMI could be dropped on exit. Although this should never happen in practice, since NMIs can only be injected, never triggered internally by the guest like exceptions. Signed-off-by:
-
Gleb Natapov authored
Bit 12 is undefined in any of the following cases: If the VM exit sets the valid bit in the IDT-vectoring information field. If the VM exit is due to a double fault. Signed-off-by:
-
Dong, Eddie authored
Also remove bit 5-6 from rsvd_bits_mask per latest SDM. Signed-off-by:
Eddie Dong <Eddie.Dong@intel.com> Signed-off-by:
-
Sheng Yang authored
The testing of feature is too early now, before vmcs_config complete initialization. Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
-
Sheng Yang authored
And clean paranthes on returns. Signed-off-by:
-
Wei Yongjun authored
Remove pointless conditional before kfree(). Signed-off-by:
Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
-
Avi Kivity authored
A pte that is shadowed when the guest EFER.NXE=1 is not valid when EFER.NXE=0; if bit 63 is set, the pte should cause a fault, and since the shadow EFER always has NX enabled, this won't happen. Fix by using a different shadow page table for different EFER.NXE bits. This allows vcpus to run correctly with different values of EFER.NXE, and for transitions on this bit to be handled correctly without requiring a full flush. Signed-off-by: -
Dong, Eddie authored
Detect, indicate, and propagate page faults where reserved bits are set. Take care to handle the different paging modes, each of which has different sets of reserved bits. [avi: fix pte reserved bits for efer.nxe=0] Signed-off-by:
-
Yang Zhang authored
Currently, the interrupt enable bit is cleared when in the vmm. This patch sets the bit and the external interrupts can be dealt with when in the vmm. This improves the I/O performance. Signed-off-by:
Yang Zhang <yang.zhang@intel.com> Signed-off-by:
-
Eddie Dong authored
The original one is for the code before refactoring. Signed-off-by:
-
Sheng Yang authored
EXIT_QUALIFICATION and GUEST_LINEAR_ADDRESS are natural width, not 64-bit. Signed-off-by:
-
Avi Kivity authored
If the hardware does not support flexpriority, zero the module parameter. Signed-off-by: -
Gleb Natapov authored
kvm_vcpu_block() unhalts vpu on an interrupt/timer without checking if interrupt window is actually opened. Signed-off-by:
-
Gleb Natapov authored
Currently timer events are processed before entering guest mode. Move it to main vcpu event loop since timer events should be processed even while vcpu is halted. Timer may cause interrupt/nmi to be injected and only then vcpu will be unhalted. Signed-off-by:
-
Avi Kivity authored
Trivial. Signed-off-by: -
Avi Kivity authored
Allows reading back hardware capability. Signed-off-by: -
Avi Kivity authored
This allows reading back how the hardware is configured. Signed-off-by: -
Avi Kivity authored
Signed-off-by: -
Avi Kivity authored
Instead of 'enable_vpid=1', use a simple 'vpid=1'. Signed-off-by: -
Avi Kivity authored
It is a static vmx-specific function. Signed-off-by: -
Avi Kivity authored
Useful to see how the module was loaded. Signed-off-by: -
Gleb Natapov authored
The prioritized bit vector manipulation functions are useful in both vmx and svm. Signed-off-by:
-
Gleb Natapov authored
svm_do_inject_vector() reimplements pop_irq(). Signed-off-by:
-
Amit Shah authored
We ignore writes to the performance counters and performance event selector registers already. Kaspersky antivirus reads the eventsel MSR causing it to crash with the current behaviour. Return 0 as data when the eventsel registers are read to stop the crash. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
-
Gleb Natapov authored
free_mmu_pages() should only undo what alloc_mmu_pages() does. Free mmu pages from the generic VM destruction function, kvm_destroy_vm(). Signed-off-by:
-
Sheng Yang authored
After discussion with Marcelo, we decided to rework device assignment framework together. The old problems are kernel logic is unnecessary complex. So Marcelo suggest to split it into a more elegant way: 1. Split host IRQ assign and guest IRQ assign. And userspace determine the combination. Also discard msi2intx parameter, userspace can specific KVM_DEV_IRQ_HOST_MSI | KVM_DEV_IRQ_GUEST_INTX in assigned_irq->flags to enable MSI to INTx convertion. 2. Split assign IRQ and deassign IRQ. Import two new ioctls: KVM_ASSIGN_DEV_IRQ and KVM_DEASSIGN_DEV_IRQ. This patch also fixed the reversed _IOR vs _IOW in definition(by deprecated the old interface). [avi: replace homemade bitcount() by hweight_long()] Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Hannes Eder authored
Fix this sparse warnings: arch/x86/kvm/lapic.c:916:22: warning: symbol 'lapic_timer_ops' was not declared. Should it be static? arch/x86/kvm/i8254.c:268:22: warning: symbol 'kpit_ops' was not declared. Should it be static? Signed-off-by:
Hannes Eder <hannes@hanneseder.net> Signed-off-by:
-
Jes Sorensen authored
Copy in SN2 RTC based ITC emulation for fast exit. The two versions have the same size, so a dropin is simpler than patching the branch instruction to hit the SN2 version. Signed-off-by:
Jes Sorensen <jes@sgi.com> Acked-by:
Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by:
-
Jes Sorensen authored
On SN2 do not pass down the real ITC frequency, but rather patch the values to match the SN2 RTC frequency. Signed-off-by:
-
Jes Sorensen authored
Move all reading of special register 'AR_ITC' into two functions, one in the kernel and one in the VMM module. When running on SN2, base the result on the RTC rather the system ITC, as the ITC isn't synchronized. Signed-off-by:
-
Jes Sorensen authored
On SN2, map in the SN2 RTC registers to the VMM module, needed for ITC emulation. Signed-off-by:
-
Gleb Natapov authored
Deliver interrupt during destination matching loop. Signed-off-by:
-
Gleb Natapov authored
The new way does not require additional loop over vcpus to calculate the one with lowest priority as one is chosen during delivery bitmap construction. Signed-off-by:
-
Gleb Natapov authored
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in apic_send_ipi() to figure out ipi destination instead of reimplementing the logic. Signed-off-by:
-
Gleb Natapov authored
ioapic_deliver() and kvm_set_msi() have code duplication. Move the code into ioapic_deliver_entry() function and call it from both places. Signed-off-by:
-
Gleb Natapov authored
Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions. Signed-off-by:
-
Joerg Roedel authored
There is no reason to update the shadow pte here because the guest pte is only changed to dirty state. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Sheng Yang authored
Gleb fixed bitmap ops usage in kvm_ioapic_get_delivery_bitmask. Sheng merged two functions, as well as fixed several issues in kvm_get_intr_delivery_bitmask 1. deliver_bitmask is a bitmap rather than a unsigned long intereger. 2. Lowest priority target bitmap wrong calculated by mistake. 3. Prevent potential NULL reference. 4. Declaration in include/kvm_host.h caused powerpc compilation warning. 5. Add warning for guest broadcast interrupt with lowest priority delivery mode. 6. Removed duplicate bitmap clean up in caller of kvm_get_intr_delivery_bitmask. Signed-off-by:
-
