- 25 Apr, 2022 10 commits
-
-
Ondrej Jirman authored
Allow the driver to wake the system on key press if the "wakeup-source" property is provided in the device tree. Using the LRADC as a wakeup source requires keeping the AVCC domain active during sleep. Since this has a nontrivial impact on power consumption (sometimes doubling it), disable the LRADC wakeup source by default. Signed-off-by:
Ondrej Jirman <x@xff.cz> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20220424161328.61103-1-samuel@sholland.orgSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
David Collins authored
The status of the keys connected to the KPDPWR_N and RESIN_N pins is identified by reading corresponding bits in the interrupt real time status register. If the status has changed by the time that the interrupt is handled then a press event will be missed. Maintain a last known status variable to find unbalanced release events and simulate press events for each accordingly. Signed-off-by:
David Collins <collinsd@codeaurora.org> Signed-off-by:
Anjelique Melendez <quic_amelende@quicinc.com> Link: https://lore.kernel.org/r/20220422191239.6271-6-quic_amelende@quicinc.comSigned-off-by:
-
David Collins authored
On certain PMICs, an unexpected assertion of KPDPWR_DEB (the positive logic hardware debounced power key signal) may be seen during the falling edge of KPDPWR_N (i.e. a power key press) when it occurs close to the rising edge of SLEEP_CLK. This then triggers a spurious KPDPWR interrupt. Handle this issue by adding software debouncing support to ignore key events that occur within the hardware debounce delay after the most recent key release event. Signed-off-by:
-
Anjelique Melendez authored
Currently, PON address is read from the "reg" property. For PON GEN3, which starts with PMK8350, the "reg" property will have both the PON HLOS and PON PBS addesses defined. Add support so that all PON generations can be configured. Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Anjelique Melendez authored
Currently, error message reads "failed to set debounce". However, code is attempting to read revision not set debounce. Fix this. Reviewed-by:
-
ran jianping authored
All work currently pending will be done first by calling destroy_workqueue, so there is unnecessary to flush it explicitly. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ran jianping <ran.jianping@zte.com.cn> Link: https://lore.kernel.org/r/20220422093304.2781183-1-ran.jianping@zte.com.cnSigned-off-by:
-
Lv Ruyi authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately. This makes the code simpler without functional changes. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20220418015036.2556731-1-lv.ruyi@zte.com.cnSigned-off-by:
-
Charles Mirabile authored
This patch adds the driver for the Sense HAT joystick. It outputs BTN_DPAD key events when moved in any of the four directions and the BTN_SELECT event when depressed. Co-developed-by:
Daniel Bauman <dbauman@redhat.com> Signed-off-by:
Mwesigwa Guma <mguma@redhat.com> Signed-off-by:
Joel Savitz <jsavitz@redhat.com> Signed-off-by:
Charles Mirabile <cmirabil@redhat.com> Link: https://lore.kernel.org/r/20220419205158.28088-3-cmirabil@redhat.comSigned-off-by:
-
Alexander Shiyan authored
Since version 5.13, the standard syscon bindings have been added to all clps711x DT nodes, so we can now use the more general syscon_regmap_lookup_by_phandle function to get the syscon pointer. Signed-off-by:
Alexander Shiyan <eagle.alexander923@gmail.com> Link: https://lore.kernel.org/r/20220420062725.25614-1-eagle.alexander923@gmail.comSigned-off-by:
-
Changcheng Deng authored
Remove unneeded variable used to store return value. Reported-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Link: https://lore.kernel.org/r/20220419064255.2563333-1-deng.changcheng@zte.com.cnSigned-off-by:
-
- 20 Apr, 2022 1 commit
-
-
Colin Ian King authored
Variable ret is being assigned a value that is never read, it is being re-assigned again in either path of the if statement. The assignment is redundant and can be removed. Cleans up clang scan build warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220418142457.84708-1-colin.i.king@gmail.comSigned-off-by:
-
- 17 Apr, 2022 2 commits
-
-
Jeff LaBundy authored
Select callers of iqs7222_parse_props() do not expect a child node to be derived and returned via pointer. As such, these callers set **child_node to NULL. However, this pointer is dereferenced in all cases. To solve this problem, dereference the pointer only for cases that expect a child node in the first place. In these cases, the caller provides a valid pointer. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20220417214132.497487-1-jeff@labundy.comSigned-off-by:
-
Dan Carpenter authored
If fwnode_property_count_u32() returns a negative error code then, because of type promotion, the "count > ARRAY_SIZE(pins)" condition will be true. The negative "count" is type promoted to a high unsigned size_t value. That means the "else if (count < 0)" condition will always be false and we don't print that error message or propagate the error code from fwnode_property_count_u32() as intended. Fix this by re-ordering the checks so that we check for negative first. Fixes: e505edae ("Input: add support for Azoteq IQS7222A/B/C") Signed-off-by:
-
- 09 Apr, 2022 3 commits
-
-
Jeff LaBundy authored
This patch adds support for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by:
-
Jeff LaBundy authored
This patch adds bindings for the Azoteq IQS7222A/B/C family of capacitive touch controllers. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220403221659.865997-2-jeff@labundy.comSigned-off-by:
-
AngeloGioacchino Del Regno authored
The mmio base address is used for the only purpose of initializing regmap for this driver, hence it's not necessary to have it in the main driver structure, as it is used only in the probe() callback. Move it local to function mt6779_keypad_pdrv_probe(). This commit brings no functional changes. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20220406115654.115093-1-angelogioacchino.delregno@collabora.comSigned-off-by:
-
- 21 Mar, 2022 7 commits
-
-
Colin Ian King authored
Variable z is being assigned a value that is never read, the variable is redundant and can be removed. Cleans up clang scan build warning: drivers/input/joystick/adi.c:139:6: warning: Although the value stored to 'z' is used in the enclosing expression, the value is never actually read from 'z' [deadcode.DeadStores] Signed-off-by:
-
Markuss Broks authored
Add support for the IST3038C touchscreen IC from Imagis, based on downstream driver. The driver supports multi-touch (10 touch points) The IST3038C IC supports touch keys, but the support isn't added because the touch screen used for testing doesn't utilize touch keys. Looking at the downstream driver, it is possible to add support for other Imagis ICs of IST30**C series. Reviewed-by:
Markuss Broks <markuss.broks@gmail.com> Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.comSigned-off-by:
-
Markuss Broks authored
This patch adds device-tree bindings for the Imagis IST3038C touch screen IC. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by:
-
Matthew Haughton authored
Confirmed LEN2064 on my P14s works with psmouse.synaptics_intertouch=1 By all accounts T14 and P14s are the same hardware which only differ by model identifier. Signed-off-by:
Matthew Haughton <snafu109@gmail.com> Link: https://lore.kernel.org/r/20220318113949.32722-1-snafu109@gmail.comSigned-off-by:
-
Zheng Yongjun authored
pm_runtime_get_sync() will increment pm usage counter even it failed. Forgetting to call pm_runtime_put_noidle will result in reference leak in stmfts_input_open, so we should fix it. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.comSigned-off-by:
-
Jeff LaBundy authored
Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by:
Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by:
-
Jeff LaBundy authored
Both iqs5xx_axis_init() and iqs5xx_irq() already define a local input_dev pointer 'input'. Use this instead of iqs5xx->input so as to make the code a bit smaller. Signed-off-by:
-
- 15 Mar, 2022 7 commits
-
-
Zhengqiao Xia authored
If HID_GROUP of eel is set to HID_GROUP_GENERIC, Whiskers Tablet Mode Switch of eel hammer will not be detected by system because the hid-vivaldi driver probes the device. When it is set to HID_GROUP_VIVALDI, system will detect Whiskers Tablet Mode Switch successfully and also support the vivaldi keyboard layout. Tested-by:
"Sean O'Brien" <seobrien@chromium.org> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com> [swboyd@chromium.org: Expand on commit text] Signed-off-by:
-
Stephen Boyd authored
Add support to the hammer driver to parse vivaldi keyboard layouts and expose them to userspace. This allows hammer devices to use vivaldi function row keys while also supporting the other features this driver supports, like the CBAS (chrome base attached switch) and a keyboard backlight. Signed-off-by:
-
Stephen Boyd authored
We need to support parsing the HID device in both the Vivaldi and the Hammer drivers so that we can properly expose the function row physmap to userspace when a hammer device uses a vivaldi keyboard layout for the function row keys. Extract the feature mapping logic from the vivaldi driver into an hid specific vivaldi library so we can use it from both HID drivers. To allow more code sharing we mandate that vivaldi data must be placed at the very beginning of the driver data attached to the HID device instance. Signed-off-by:
-
Stephen Boyd authored
Let's introduce a common library file for the physmap show function duplicated between three different keyboard drivers. This largely copies the code from cros_ec_keyb.c which has the most recent version of the show function, while using the vivaldi_data struct from the hid-vivaldi driver. This saves a small amount of space in an allyesconfig build. $ ./scripts/bloat-o-meter vmlinux.before vmlinux.after add/remove: 3/0 grow/shrink: 2/3 up/down: 412/-720 (-308) Function old new delta vivaldi_function_row_physmap_show - 292 +292 _sub_I_65535_1 1057564 1057616 +52 _sub_D_65535_0 1057564 1057616 +52 e843419@49f2_00062737_9b04 - 8 +8 e843419@20f6_0002a34d_35bc - 8 +8 atkbd_parse_fwnode_data 480 472 -8 atkbd_do_show_function_row_physmap 316 76 -240 function_row_physmap_show 620 148 -472 Total: Before=285581925, After=285581617, chg -0.00% Signed-off-by:
-
Dmitry Torokhov authored
We can use devm to register keyboard backlight LED on hammer devices, this will allow us to use HID's driver data for something else later. Link: https://lore.kernel.org/r/20220228075446.466016-2-dmitry.torokhov@gmail.com Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler Signed-off-by:
-
Dmitry Torokhov authored
Sync up with mainline to again get the latest changes in HID subsystem.
-
Lv Ruyi (CGEL ZTE) authored
The irq variable is defined as unsigned int. If the platform_get_irq() returns a negative value, data type cast may result in error. Reported-by:
-
- 13 Mar, 2022 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Free shmem backing storage for SGX enclave pages when those are swapped back into EPC memory - Prevent do_int3() from being kprobed, to avoid recursion - Remap setup_data and setup_indirect structures properly when accessing their members - Correct the alternatives patching order for modules too * tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Free backing memory after faulting the enclave page x86/traps: Mark do_int3() NOKPROBE_SYMBOL x86/boot: Add setup_indirect support in early_memremap_is_setup_data() x86/boot: Fix memremap of setup_indirect structures x86/module: Fix the paravirt vs alternative order
-
- 12 Mar, 2022 8 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix event parser error for hybrid systems - Fix NULL check against wrong variable in 'perf bench' and in the parsing code - Update arm64 KVM headers from the kernel sources - Sync cpufeatures header with the kernel sources * tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf parse: Fix event parser error for hybrid systems perf bench: Fix NULL check against wrong variable perf parse-events: Fix NULL check against wrong variable tools headers cpufeatures: Sync with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm kconfig fix from Dave Airlie: "Thorsten pointed out this had fallen down the cracks and was in -next only, I've picked it out, fixed up it's Fixes: line. - fix regression in Kconfig" * tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm: drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
-
Zhengjun Xing authored
This bug happened on hybrid systems when both cpu_core and cpu_atom have the same event name such as "UOPS_RETIRED.MS" while their event terms are different, then during perf stat, the event for cpu_atom will parse fail and then no output for cpu_atom. UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/ It is because event terms in the "head" of parse_events_multi_pmu_add will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS for cpu_core, then when parsing the same event for cpu_atom, it still uses the event terms for cpu_core, but event terms for cpu_atom are different with cpu_core, the event parses for cpu_atom will fail. This patch fixes it, the event terms should be parsed from the original event. This patch can work for the hybrid systems that have the same event in more than 2 PMUs. It also can work in non-hybrid systems. Before: # perf stat -v -e UOPS_RETIRED.MS -a sleep 1 Using CPUID GenuineIntel-6-97-1 UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ Control descriptor is not initialized UOPS_RETIRED.MS: 2737845 16068518485 16068518485 Performance counter stats for 'system wide': 2,737,845 cpu_core/UOPS_RETIRED.MS/ 1.002553850 seconds time elapsed After: # perf stat -v -e UOPS_RETIRED.MS -a sleep 1 Using CPUID GenuineIntel-6-97-1 UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/ UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/ Control descriptor is not initialized UOPS_RETIRED.MS: 1977555 16076950711 16076950711 UOPS_RETIRED.MS: 568684 8038694234 8038694234 Performance counter stats for 'system wide': 1,977,555 cpu_core/UOPS_RETIRED.MS/ 568,684 cpu_atom/UOPS_RETIRED.MS/ 1.004758259 seconds time elapsed Fixes: fb081153 ("perf parse-events: Allow config on kernel PMU events") Reviewed-by:Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Zhengjun Xing <zhengjun.xing@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220307151627.30049-1-zhengjun.xing@linux.intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Weiguo Li authored
We did a NULL check after "epollfdp = calloc(...)", but we checked "epollfd" instead of "epollfdp". Signed-off-by:
Weiguo Li <liwg06@foxmail.com> Acked-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/tencent_B5D64530EB9C7DBB8D2C88A0C790F1489D0A@qq.comSigned-off-by:
-
Weiguo Li authored
We did a null check after "tmp->symbol = strdup(...)", but we checked "list->symbol" other than "tmp->symbol". Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes from: d45476d9 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE") Its just a comment fixup. This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Borislav Petkov <bp@suse.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/Y@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes from: a5905d6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated") That don't causes any changes in tooling (when built on x86), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/lkml/YiyhAK6sVPc83FaI@kernel.orgSigned-off-by:
-
Thomas Zimmermann authored
As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select the option to fix the build failure. The error message is shown below. arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to `drm_panel_dp_aux_backlight' make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1 The issue has been reported before, when DisplayPort helpers were hidden behind the option CONFIG_DRM_KMS_HELPER. [2] v2: * fix and expand commit description (Arnd) Signed-off-by:Thomas Zimmermann <tzimmermann@suse.de> Fixes: 9d6366e7 ("drm: fb_helper: improve CONFIG_FB dependency") Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1] Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2] Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.deSigned-off-by:
Dave Airlie <airlied@redhat.com>
-
