- 04 Sep, 2020 12 commits
-
-
Linus Torvalds authored
Merge emailed patches from Peter Xu: "This is a small series that I picked up from Linus's suggestion to simplify cow handling (and also make it more strict) by checking against page refcounts rather than mapcounts. This makes uffd-wp work again (verified by running upmapsort)" Note: this is horrendously bad timing, and making this kind of fundamental vm change after -rc3 is not at all how things should work. The saving grace is that it really is a a nice simplification: 8 files changed, 29 insertions(+), 120 deletions(-) The reason for the bad timing is that it turns out that commit 17839856 ("gup: document and work around 'COW can break either way' issue" broke not just UFFD functionality (as Peter noticed), but Mikulas Patocka also reports that it caused issues for strace when running in a DAX environment with ext4 on a persistent memory setup. And we can't just revert that commit without re-introducing the original issue that is a potential security hole, so making COW stricter (and in the process much simpler) is a step to then undoing the forced COW that broke other uses. Link: https://lore.kernel.org/lkml/alpine.LRH.2.02.2009031328040.6929@file01.intranet.prod.int.rdu2.redhat.com/ * emailed patches from Peter Xu <peterx@redhat.com>: mm: Add PGREUSE counter mm/gup: Remove enfornced COW mechanism mm/ksm: Remove reuse_ksm_page() mm: do_wp_page() simplification
-
Peter Xu authored
This accounts for wp_page_reuse() case, where we reused a page for COW. Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Peter Xu authored
With the more strict (but greatly simplified) page reuse logic in do_wp_page(), we can safely go back to the world where cow is not enforced with writes. This essentially reverts commit 17839856 ("gup: document and work around 'COW can break either way' issue"). There are some context differences due to some changes later on around it: 2170ecfa ("drm/i915: convert get_user_pages() --> pin_user_pages()", 2020-06-03) 376a34ef ("mm/gup: refactor and de-duplicate gup_fast() code", 2020-06-03) Some lines moved back and forth with those, but this revert patch should have striped out and covered all the enforced cow bits anyways. Suggested-by:
-
Peter Xu authored
Remove the function as the last reference has gone away with the do_wp_page() changes. Signed-off-by:
-
Linus Torvalds authored
How about we just make sure we're the only possible valid user fo the page before we bother to reuse it? Simplify, simplify, simplify. And get rid of the nasty serialization on the page lock at the same time. [peterx: add subject prefix] Signed-off-by:
-
Leon Romanovsky authored
GCOV built with GCC 10 doesn't initialize n_function variable. This produces different kernel panics as was seen by Colin in Ubuntu and me in FC 32. As a workaround, let's disable GCOV build for broken GCC 10 version. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1891288 Link: https://lore.kernel.org/lkml/20200827133932.3338519-1-leon@kernel.org Link: https://lore.kernel.org/lkml/CAHk-=whbijeSdSvx-Xcr0DPMj0BiwhJ+uiNnDSVZcr_h_kg7UA@mail.gmail.com/ Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Barret Rhoden authored
init_stat() returns 0 on success, same as vfs_lstat(). When it replaced vfs_lstat(), the '!' was dropped. Fixes: 716308a5 ("init: add an init_stat helper") Signed-off-by:
Barret Rhoden <brho@google.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Use uintptr_t when casting numbers to pointers - Keep output expected by 3rd parties: Turn off summary for interval mode by default. - BPF is in kernel space, make sure do_validate_kcore_modules() knows about that. - Explicitly call out event modifiers in the documentation. - Fix jevents() allocation of space for regular expressions. - Address libtraceevent build warnings on 32-bit arches. - Fix checking of functions returns using ERR_PTR() in 'perf bench'. * tag 'perf-tools-fixes-for-v5.9-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Add bpf image check to __map__is_kmodule perf record/stat: Explicitly call out event modifiers in the documentation perf bench: The do_run_multi_threaded() function must use IS_ERR(perf_session__new()) perf stat: Turn off summary for interval mode by default libtraceevent: Fix build warning on 32-bit arches perf jevents: Fix suspicious code in fixregex() perf parse-events: Use uintptr_t when casting numbers to pointers
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Use netif_rx_ni() when necessary in batman-adv stack, from Jussi Kivilinna. 2) Fix loss of RTT samples in rxrpc, from David Howells. 3) Memory leak in hns_nic_dev_probe(), from Dignhao Liu. 4) ravb module cannot be unloaded, fix from Yuusuke Ashizuka. 5) We disable BH for too lokng in sctp_get_port_local(), add a cond_resched() here as well, from Xin Long. 6) Fix memory leak in st95hf_in_send_cmd, from Dinghao Liu. 7) Out of bound access in bpf_raw_tp_link_fill_link_info(), from Yonghong Song. 8) Missing of_node_put() in mt7530 DSA driver, from Sumera Priyadarsini. 9) Fix crash in bnxt_fw_reset_task(), from Michael Chan. 10) Fix geneve tunnel checksumming bug in hns3, from Yi Li. 11) Memory leak in rxkad_verify_response, from Dinghao Liu. 12) In tipc, don't use smp_processor_id() in preemptible context. From Tuong Lien. 13) Fix signedness issue in mlx4 memory allocation, from Shung-Hsi Yu. 14) Missing clk_disable_prepare() in gemini driver, from Dan Carpenter. 15) Fix ABI mismatch between driver and firmware in nfp, from Louis Peens. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (110 commits) net/smc: fix sock refcounting in case of termination net/smc: reset sndbuf_desc if freed net/smc: set rx_off for SMCR explicitly net/smc: fix toleration of fake add_link messages tg3: Fix soft lockup when tg3_reset_task() fails. doc: net: dsa: Fix typo in config code sample net: dp83867: Fix WoL SecureOn password nfp: flower: fix ABI mismatch between driver and firmware tipc: fix shutdown() of connectionless socket ipv6: Fix sysctl max for fib_multipath_hash_policy drivers/net/wan/hdlc: Change the default of hard_header_len to 0 net: gemini: Fix another missing clk_disable_unprepare() in probe net: bcmgenet: fix mask check in bcmgenet_validate_flow() amd-xgbe: Add support for new port mode net: usb: dm9601: Add USB ID of Keenetic Plus DSL vhost: fix typo in error message net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() pktgen: fix error message with wrong function name net: ethernet: ti: am65-cpsw: fix rmii 100Mbit link mode cxgb4: fix thermal zone device registration ... -
Linus Torvalds authored
Merge gate page refcount fix from Dave Hansen: "During the conversion over to pin_user_pages(), gate pages were missed. The fix is pretty simple, and is accompanied by a new test from Andy which probably would have caught this earlier" * emailed patches from Dave Hansen <dave.hansen@linux.intel.com>: selftests/x86/test_vsyscall: Improve the process_vm_readv() test mm: fix pin vs. gup mismatch with gate pages
-
Andy Lutomirski authored
The existing code accepted process_vm_readv() success or failure as long as it didn't return garbage. This is too weak: if the vsyscall page is readable, then process_vm_readv() should succeed and, if the page is not readable, then it should fail. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jann Horn <jannh@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Dave Hansen authored
Gate pages were missed when converting from get to pin_user_pages(). This can lead to refcount imbalances. This is reliably and quickly reproducible running the x86 selftests when vsyscall=emulate is enabled (the default). Fix by using try_grab_page() with appropriate flags passed. The long story: Today, pin_user_pages() and get_user_pages() are similar interfaces for manipulating page reference counts. However, "pins" use a "bias" value and manipulate the actual reference count by 1024 instead of 1 used by plain "gets". That means that pin_user_pages() must be matched with unpin_user_pages() and can't be mixed with a plain put_user_pages() or put_page(). Enter gate pages, like the vsyscall page. They are pages usually in the kernel image, but which are mapped to userspace. Userspace is allowed access to them, including interfaces using get/pin_user_pages(). The refcount of these kernel pages is manipulated just like a normal user page on the get/pin side so that the put/unpin side can work the same for normal user pages or gate pages. get_gate_page() uses try_get_page() which only bumps the refcount by 1, not 1024, even if called in the pin_user_pages() path. If someone pins a gate page, this happens: pin_user_pages() get_gate_page() try_get_page() // bump refcount +1 ... some time later unpin_user_pages() page_ref_sub_and_test(page, 1024)) ... and boom, we get a refcount off by 1023. This is reliably and quickly reproducible running the x86 selftests when booted with vsyscall=emulate (the default). The selftests use ptrace(), but I suspect anything using pin_user_pages() on gate pages could hit this. To fix it, simply use try_grab_page() instead of try_get_page(), and pass 'gup_flags' in so that FOLL_PIN can be respected. This bug traces back to the very beginning of the FOLL_PIN support in commit 3faa52c0 ("mm/gup: track FOLL_PIN pages"), which showed up in the 5.7 release. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Acked-by:
-
- 03 Sep, 2020 17 commits
-
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: fixes 2020-09-03 Please apply the following patch series for smc to netdev's net tree. Patch 1 fixes the toleration of older SMC implementations. Patch 2 takes care of a problem that happens when SMCR is used after SMCD initialization failed. Patch 3 fixes a problem with freed send buffers, and patch 4 corrects refcounting when SMC terminates due to device removal. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
When an ISM device is removed, all its linkgroups are terminated, i.e. all the corresponding connections are killed. Connection killing invokes smc_close_active_abort(), which decreases the sock refcount for certain states to simulate passive closing. And it cancels the close worker and has to give up the sock lock for this timeframe. This opens the door for a passive close worker or a socket close to run in between. In this case smc_close_active_abort() and passive close worker resp. smc_release() might do a sock_put for passive closing. This causes: [ 1323.315943] refcount_t: underflow; use-after-free. [ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130 [ 1323.316069] Kernel panic - not syncing: panic_on_warn set ... [ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1 [ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0) [ 1323.316108] Call Trace: [ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8 [ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8 [ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288 [ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158 [ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130 [ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0 [ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238 [ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130 [ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130) [ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc] [ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0 [ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40 [ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278 [ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8 [ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520 [ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0 [ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38 [ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4 [ 1323.316446] 1 lock held by uperf/54469: [ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0 The patch rechecks sock state in smc_close_active_abort() after smc_close_cancel_work() to avoid duplicate decrease of sock refcount for the same purpose. Fixes: 611b63a1 ("net/smc: cancel tx worker in case of socket aborts") Reviewed-by:Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
When an SMC connection is created, and there is a problem to create an RMB or DMB, the previously created send buffer is thrown away as well including buffer descriptor freeing. Make sure the connection no longer references the freed buffer descriptor, otherwise bugs like this are possible: [71556.835148] ============================================================================= [71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten [71556.835172] ----------------------------------------------------------------------------- [71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b [71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726 [71556.835234] ___slab_alloc+0x5a4/0x690 [71556.835239] __slab_alloc.constprop.0+0x70/0xb0 [71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835250] __smc_buf_create+0x184/0x578 [smc] [71556.835257] smc_buf_create+0x2e/0xe8 [smc] [71556.835264] smc_listen_work+0x516/0x6a0 [smc] [71556.835275] process_one_work+0x280/0x478 [71556.835280] worker_thread+0x66/0x368 [71556.835287] kthread+0x17a/0x1a0 [71556.835294] ret_from_fork+0x28/0x2c [71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726 [71556.835307] __slab_free+0x246/0x560 [71556.835311] kfree+0x398/0x3f8 [71556.835318] smc_buf_create+0xd8/0xe8 [smc] [71556.835324] smc_listen_work+0x516/0x6a0 [smc] [71556.835328] process_one_work+0x280/0x478 [71556.835332] worker_thread+0x66/0x368 [71556.835337] kthread+0x17a/0x1a0 [71556.835344] ret_from_fork+0x28/0x2c [71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200 [71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2 [71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ [71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk [71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk [71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. [71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........ [71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ [71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54 [71556.835456] Hardware name: IBM 3906 M03 703 (LPAR) [71556.835464] Workqueue: events smc_listen_work [smc] [71556.835470] Call Trace: [71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8 [71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8 [71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130 [71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0 [71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238 [71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690 [71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0 [71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8 [71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc] [71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc] [71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc] [71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478 [71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368 [71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0 [71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c [71556.835569] INFO: lockdep is turned off. [71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b [71556.835577] FIX kmalloc-128: Marking all objects used Fixes: fd7f3a74 ("net/smc: remove freed buffer from list") Reviewed-by:
-
Ursula Braun authored
SMC tries to make use of SMCD first. If a problem shows up, it tries to switch to SMCR. If the SMCD initializing problem shows up after the SMCD connection has already been initialized, field rx_off keeps the wrong SMCD value for SMCR, which results in corrupted data at the receiver. This patch adds an explicit (re-)setting of field rx_off to zero if the connection uses SMCR. Fixes: be244f28 ("net/smc: add SMC-D support in data transfer") Reviewed-by:
-
Karsten Graul authored
Older SMCR implementations had no link failover support and used one link only. Because the handshake protocol requires to try the establishment of a second link the old code sent a fake add_link message and declined any server response afterwards. The current code supports multiple links and inspects the received fake add_link message more closely. To tolerate the fake add_link messages smc_llc_is_local_add_link() needs an improved check of the message to be able to separate between locally enqueued and fake add_link messages. And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is invalid and reject the add_link request in that case. Fixes: c48254fa ("net/smc: move add link processing for new device into llc layer") Reviewed-by:
-
Michael Chan authored
If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by:
David Christensen <drc@linux.vnet.ibm.com> Reported-by:
Baptiste Covolato <baptiste@arista.com> Fixes: db219973 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Jiri Olsa authored
When validating kcore modules the do_validate_kcore_modules function checks on every kernel module dso against modules record. The __map__is_kmodule check is used to get only kernel module dso objects through. Currently the bpf images are slipping through the check and making the validation to fail, so report falls back from kcore usage to kallsyms. Adding __map__is_bpf_image check for bpf image and adding it to __map__is_kmodule check. Fixes: 3c29d448 ("perf annotate: Add basic support for bpf_image") Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Kim Phillips authored
Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf ("perf list: Document precise event sampling for AMD IBS") Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.comSigned-off-by:
-
YueHaibing authored
In case of error, the function perf_session__new() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR() Committer notes: This wasn't compiling due to an extraneous '{' not matched by a '}', fix it. Fixes: 13edc237 ("perf bench: Add a multi-threaded synthesize benchmark") Signed-off-by:YueHaibing <yuehaibing@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.comSigned-off-by:
-
Jin Yao authored
There's a risk that outputting interval mode summaries by default breaks CSV consumers. It already broke pmu-tools/toplev. So now we turn off the summary by default but we create a new option '--summary' to enable the summary. This is active even when not using CSV mode. Before: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized 1.000265904 601 context-switches # 0.075 K/sec 1.000265904 10 cpu-migrations # 0.001 K/sec 1.000265904 0 page-faults # 0.000 K/sec 1.000265904 66,746,521 cycles # 0.008 GHz 1.000265904 71,874,398 instructions # 1.08 insn per cycle 1.000265904 13,356,781 branches # 1.668 M/sec 1.000265904 298,756 branch-misses # 2.24% of all branches 2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized 2.001857667 164 context-switches # 0.020 K/sec 2.001857667 10 cpu-migrations # 0.001 K/sec 2.001857667 2 page-faults # 0.000 K/sec 2.001857667 5,822,188 cycles # 0.001 GHz 2.001857667 2,186,170 instructions # 0.38 insn per cycle 2.001857667 442,378 branches # 0.055 M/sec 2.001857667 44,750 branch-misses # 10.12% of all branches Performance counter stats for 'system wide': 16,018.25 msec cpu-clock # 7.993 CPUs utilized 765 context-switches # 0.048 K/sec 20 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 72,568,709 cycles # 0.005 GHz 74,060,568 instructions # 1.02 insn per cycle 13,799,159 branches # 0.861 M/sec 343,506 branch-misses # 2.49% of all branches 2.004118489 seconds time elapsed After: root@kbl-ppc:~# perf stat -I1000 --interval-count 2 # time counts unit events 1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized 1.001336393 82 context-switches # 0.010 K/sec 1.001336393 8 cpu-migrations # 0.001 K/sec 1.001336393 0 page-faults # 0.000 K/sec 1.001336393 4,199,121 cycles # 0.001 GHz 1.001336393 1,373,991 instructions # 0.33 insn per cycle 1.001336393 270,681 branches # 0.034 M/sec 1.001336393 31,659 branch-misses # 11.70% of all branches 2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized 2.003905006 184 context-switches # 0.023 K/sec 2.003905006 8 cpu-migrations # 0.001 K/sec 2.003905006 2 page-faults # 0.000 K/sec 2.003905006 5,446,190 cycles # 0.001 GHz 2.003905006 2,312,547 instructions # 0.42 insn per cycle 2.003905006 451,691 branches # 0.056 M/sec 2.003905006 37,925 branch-misses # 8.40% of all branches root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary # time counts unit events 1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized 1.001313128 83 context-switches # 0.010 K/sec 1.001313128 8 cpu-migrations # 0.001 K/sec 1.001313128 0 page-faults # 0.000 K/sec 1.001313128 4,470,950 cycles # 0.001 GHz 1.001313128 1,440,045 instructions # 0.32 insn per cycle 1.001313128 283,222 branches # 0.035 M/sec 1.001313128 33,576 branch-misses # 11.86% of all branches 2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized 2.003857385 154 context-switches # 0.019 K/sec 2.003857385 8 cpu-migrations # 0.001 K/sec 2.003857385 2 page-faults # 0.000 K/sec 2.003857385 4,515,676 cycles # 0.001 GHz 2.003857385 2,180,449 instructions # 0.48 insn per cycle 2.003857385 435,254 branches # 0.054 M/sec 2.003857385 31,179 branch-misses # 7.16% of all branches Performance counter stats for 'system wide': 16,033.53 msec cpu-clock # 7.992 CPUs utilized 237 context-switches # 0.015 K/sec 16 cpu-migrations # 0.001 K/sec 2 page-faults # 0.000 K/sec 8,986,626 cycles # 0.001 GHz 3,620,494 instructions # 0.40 insn per cycle 718,476 branches # 0.045 M/sec 64,755 branch-misses # 9.01% of all branches 2.006124542 seconds time elapsed Fixes: c7e5b328 ("perf stat: Report summary for interval mode") Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Tested-by:
-
Tzvetomir Stoyanov (VMware) authored
Fixed a compilation warning for casting to pointer from integer of different size on 32-bit platforms. Reported-by:
Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Signed-off-by:
Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Signed-off-by:
-
Namhyung Kim authored
The new string should have enough space for the original string and the back slashes IMHO. Fixes: fbc2844e ("perf vendor events: Use more flexible pattern matching for CPU identification for mapfile.csv") Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Link: http://lore.kernel.org/lkml/20200903152510.489233-1-namhyung@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To address these errors found when cross building from x86_64 to MIPS little endian 32-bit: CC /tmp/build/perf/util/parse-events-bison.o util/parse-events.y: In function 'parse_events_parse': util/parse-events.y:514:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 514 | (void *) $2, $6, $4); | ^ util/parse-events.y:531:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 531 | (void *) $2, NULL, $4)) { | ^ util/parse-events.y:547:6: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 547 | (void *) $2, $4, 0); | ^ util/parse-events.y:564:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 564 | (void *) $2, NULL, 0)) { | ^ Fixes: cabbf268 ("perf parse: Before yyabort-ing free components") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Signed-off-by: -
Paul Barker authored
In the "single port" example code for configuring a DSA switch without tagging support from userspace the command to bring up the "lan2" link was typo'd. Signed-off-by:
Paul Barker <pbarker@konsulko.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblockLinus Torvalds authored
Pull misc build failure fixes from Mike Rapoport: "Fix min_low_pfn/max_low_pfn build errors on ia64 and microblaze. Some configurations of ia64 and microblaze use min_low_pfn and max_low_pfn in pfn_valid(). This causes build failures for modules that use pfn_valid(). The fix is to add EXPORT_SYMBOL() for these variables on ia64 and microblaze" * tag 'fixes-2020-09-03' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: ia64: fix min_low_pfn/max_low_pfn build errors microblaze: fix min_low_pfn/max_low_pfn build errors
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull affs fix from David Sterba: "One fix to make permissions work the same way as on AmigaOS" * tag 'affs-for-5.9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix basic permission bits to actually work
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM
-
- 02 Sep, 2020 11 commits
-
-
Dan Murphy authored
Fix the registers being written to as the values were being over written when writing the same registers. Fixes: caabee5b ("net: phy: dp83867: support Wake on LAN") Signed-off-by:
Dan Murphy <dmurphy@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Louis Peens authored
Fix an issue where the driver wrongly detected ipv6 neighbour updates from the NFP as corrupt. Add a reserved field on the kernel side so it is similar to the ipv4 version of the struct and has space for the extra bytes from the card. Fixes: 9ea9bfa1 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw") Signed-off-by:
Louis Peens <louis.peens@netronome.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Tetsuo Handa authored
syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation. ---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ---------- One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called. The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless. [1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2Reported-by:syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by:
-
Ido Schimmel authored
Cited commit added the possible value of '2', but it cannot be set. Fix it by adjusting the maximum value to '2'. This is consistent with the corresponding IPv4 sysctl. Before: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 0 After: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 2 Fixes: d8f74f09 ("ipv6: Support multipath hashing on inner IP pkts") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
-
Xie He authored
Change the default value of hard_header_len in hdlc.c from 16 to 0. Currently there are 6 HDLC protocol drivers, among them: hdlc_raw_eth, hdlc_cisco, hdlc_ppp, hdlc_x25 set hard_header_len when attaching the protocol, overriding the default. So this patch does not affect them. hdlc_raw and hdlc_fr don't set hard_header_len when attaching the protocol. So this patch will change the hard_header_len of the HDLC device for them from 16 to 0. This is the correct change because both hdlc_raw and hdlc_fr don't have header_ops, and the code in net/packet/af_packet.c expects the value of hard_header_len to be consistent with header_ops. In net/packet/af_packet.c, in the packet_snd function, for AF_PACKET/DGRAM sockets it would reserve a headroom of hard_header_len and call dev_hard_header to fill in that headroom, and for AF_PACKET/RAW sockets, it does not reserve the headroom and does not call dev_hard_header, but checks if the user has provided a header of length hard_header_len (in function dev_validate_header). Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
Dan Carpenter authored
We recently added some calls to clk_disable_unprepare() but we missed the last error path if register_netdev() fails. I made a couple cleanups so we avoid mistakes like this in the future. First I reversed the "if (!ret)" condition and pulled the code in one indent level. Also, the "port->netdev = NULL;" is not required because "port" isn't used again outside this function so I deleted that line. Fixes: 4d5ae32f ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - data sanitization and validtion fixes for report descriptor parser from Marc Zyngier - memory leak fix for hid-elan driver from Dinghao Liu - two device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: core: Sanitize event code and type when mapping input HID: core: Correctly handle ReportSize being zero HID: elan: Fix memleak in elan_input_configured HID: microsoft: Add rumble support for the 8bitdo SN30 Pro+ controller HID: quirks: Set INCREMENT_USAGE_ON_DUPLICATE for all Saitek X52 devices
-
Denis Efremov authored
VALIDATE_MASK(eth_mask->h_source) is checked twice in a row in bcmgenet_validate_flow(). Add VALIDATE_MASK(eth_mask->h_dest) instead. Fixes: 3e370952 ("net: bcmgenet: add support for ethtool rxnfc flows") Signed-off-by:
Denis Efremov <efremov@linux.com> Acked-by:
Doug Berger <opendmb@gmail.com> Acked-by:
-
Shyam Sundar S K authored
Add support for a new port mode that is a backplane connection without support for auto negotiation. Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - writecache fix to allow dax_direct_access() to partitioned pmem devices. - multipath fix to avoid any Path Group initialization if 'pg_init_in_progress' isn't set. - crypt fix to use DECLARE_CRYPTO_WAIT() for onstack wait structures. - integrity fix to properly check integrity after device creation when in bitmap mode. - thinp and cache target __create_persistent_data_objects() fixes to reset the metadata's dm_block_manager pointer from PTR_ERR to NULL before returning from error path. - persistent-data block manager fix to guard against dm_block_manager NULL pointer dereference in dm_bm_is_read_only() and update various opencoded bm->read_only checks to use dm_bm_is_read_only() instead. * tag 'for-5.9/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm thin metadata: Fix use-after-free in dm_bm_set_read_only dm thin metadata: Avoid returning cmd->bm wild pointer on error dm cache metadata: Avoid returning cmd->bm wild pointer on error dm integrity: fix error reporting in bitmap mode after creation dm crypt: Initialize crypto wait structures dm mpath: fix racey management of PG initialization dm writecache: handle DAX to partitions on persistent memory correctly
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: "Various small corruption fixes that have come in during the past month: - Avoid a log recovery failure for an insert range operation by rolling deferred ops incrementally instead of at the end. - Fix an off-by-one error when calculating log space reservations for anything involving an inode allocation or free. - Fix a broken shortform xattr verifier. - Ensure that the shortform xattr header padding is always initialized to zero" * tag 'xfs-5.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: initialize the shortform attr header padding entry xfs: fix boundary test in xfs_attr_shortform_verify xfs: fix off-by-one in inode alloc block reservation calculation xfs: finish dfops on every insert range shift iteration
-
