Rename ili251x_hardware_reset() to ili210x_hardware_reset(), change its
parameter from struct device * to struct gpio_desc *, and use it as one
single consistent reset implementation all over the driver. Also increase
the minimum reset duration to 12ms, to make sure the reset is really
within the spec.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518210423.106555-1-marex@denx.deSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30
"2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum
10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset
timings such that T4 is 12ms and T2 is 160ms to fit those figures.

This prevents sporadic touch controller start up failures when some
systems with at least ILI251x controller boot, without this patch
the systems sometimes fail to communicate with the touch controller.

Fixes: 201f3c80 ("Input: ili210x - add reset GPIO support")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fengping has no longer interest and time to maintain this driver so he
agreed to transfer maintainership over to me.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220421140255.2781505-1-mkorpershoek@baylibre.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add keycodes that are used by marine navigation devices.
Signed-off-by: Shelby Heffron <Shelby.Heffron@garmin.com>
Link: https://lore.kernel.org/r/20220414015356.1619310-1-Shelby.Heffron@garmin.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.

Fixes: f77621cc ("Input: omap-keypad - dynamically handle register offsets")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220412070131.19848-1-linmq006@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When the driver fails to probe, we will get the following splat:

[   19.311970] ------------[ cut here ]------------
[   19.312566] WARNING: CPU: 3 PID: 375 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   19.317591] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   19.328831] Call Trace:
[   19.329112]  <TASK>
[   19.329369]  regulator_bulk_free+0x82/0xe0
[   19.329860]  devres_release_group+0x319/0x3d0
[   19.330357]  i2c_device_probe+0x766/0x940

Fix this by adding a callback that will deal with the disabling when the
driver fails to probe.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220409022629.3493557-1-zheyuma97@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This reverts commit 37ef4c19.

The touchpad present in the Dell Precision 7550 and 7750 laptops
reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However,
the device is not a clickpad, it is a touchpad with physical buttons.

In order to fix this issue, a quirk for the device was introduced in
libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property:

	[Precision 7x50 Touchpad]
	MatchBus=i2c
	MatchUdevType=touchpad
	MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50*
	AttrInputPropDisable=INPUT_PROP_BUTTONPAD

However, because of the change introduced in 37ef4c19 ("Input: clear
BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped
anymore breaking the device right click button and making impossible to
workaround it in user space.

In order to avoid breakage on other present or future devices, revert
the patch causing the issue.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare input updates for 5.18 merge window.

Variable z is being assigned a value that is never read, the
variable is redundant and can be removed.

Cleans up clang scan build warning:
drivers/input/joystick/adi.c:139:6: warning: Although the
value stored to 'z' is used in the enclosing expression,
the value is never actually read from 'z' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318002318.80519-1-colin.i.king@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220305165330.13061-3-markuss.broks@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds device-tree bindings for the Imagis
IST3038C touch screen IC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220305165330.13061-2-markuss.broks@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Confirmed LEN2064 on my P14s works with psmouse.synaptics_intertouch=1
By all accounts T14 and P14s are the same hardware which only differ by
model identifier.
Signed-off-by: Matthew Haughton <snafu109@gmail.com>
Link: https://lore.kernel.org/r/20220318113949.32722-1-snafu109@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Update input_set_capability() to prevent kernel panic in case the
event code exceeds the bitmap for the given event type.
Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Both iqs5xx_axis_init() and iqs5xx_irq() already define a local
input_dev pointer 'input'. Use this instead of iqs5xx->input so
as to make the code a bit smaller.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20220320025707.404544-1-jeff@labundy.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If HID_GROUP of eel is set to HID_GROUP_GENERIC, Whiskers Tablet Mode
Switch of eel hammer will not be detected by system because the
hid-vivaldi driver probes the device. When it is set to
HID_GROUP_VIVALDI, system will detect Whiskers Tablet Mode Switch
successfully and also support the vivaldi keyboard layout.
Tested-by: "Sean O'Brien" <seobrien@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Zhengqiao Xia <xiazhengqiao@huaqin.corp-partner.google.com>
[swboyd@chromium.org: Expand on commit text]
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-6-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add support to the hammer driver to parse vivaldi keyboard layouts and
expose them to userspace. This allows hammer devices to use vivaldi
function row keys while also supporting the other features this driver
supports, like the CBAS (chrome base attached switch) and a keyboard
backlight.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-5-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We need to support parsing the HID device in both the Vivaldi and the
Hammer drivers so that we can properly expose the function row physmap
to userspace when a hammer device uses a vivaldi keyboard layout for the
function row keys. Extract the feature mapping logic from the vivaldi
driver into an hid specific vivaldi library so we can use it from both
HID drivers.

To allow more code sharing we mandate that vivaldi data must be placed
at the very beginning of the driver data attached to the HID device
instance.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-4-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's introduce a common library file for the physmap show function
duplicated between three different keyboard drivers. This largely copies
the code from cros_ec_keyb.c which has the most recent version of the
show function, while using the vivaldi_data struct from the hid-vivaldi
driver. This saves a small amount of space in an allyesconfig build.

$ ./scripts/bloat-o-meter vmlinux.before vmlinux.after

add/remove: 3/0 grow/shrink: 2/3 up/down: 412/-720 (-308)
Function                                     old     new   delta
vivaldi_function_row_physmap_show              -     292    +292
_sub_I_65535_1                           1057564 1057616     +52
_sub_D_65535_0                           1057564 1057616     +52
e843419@49f2_00062737_9b04                     -       8      +8
e843419@20f6_0002a34d_35bc                     -       8      +8
atkbd_parse_fwnode_data                      480     472      -8
atkbd_do_show_function_row_physmap           316      76    -240
function_row_physmap_show                    620     148    -472
Total: Before=285581925, After=285581617, chg -0.00%
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Link: https://lore.kernel.org/r/20220228075446.466016-3-dmitry.torokhov@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We can use devm to register keyboard backlight LED on hammer devices, this
will allow us to use HID's driver data for something else later.

Link: https://lore.kernel.org/r/20220228075446.466016-2-dmitry.torokhov@gmail.com
Tested-by: Stephen Boyd <swboyd@chromium.org> # coachz, wormdingler
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with mainline to again get the latest changes in HID subsystem.

Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.

Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints

Fail log:

usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
 <TASK>
 aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
 input_open_device+0x1bb/0x320 drivers/input/input.c:629
 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593

Fixes: 8e20cf2b ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The irq variable is defined as unsigned int. If the platform_get_irq()
returns a negative value, data type cast may result in error.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi (CGEL ZTE) <lv.ruyi@zte.com.cn>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20220308025054.2077162-1-lv.ruyi@zte.com.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull x86 fixes from Borislav Petkov:

 - Free shmem backing storage for SGX enclave pages when those are
   swapped back into EPC memory

 - Prevent do_int3() from being kprobed, to avoid recursion

 - Remap setup_data and setup_indirect structures properly when
   accessing their members

 - Correct the alternatives patching order for modules too

* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Free backing memory after faulting the enclave page
  x86/traps: Mark do_int3() NOKPROBE_SYMBOL
  x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
  x86/boot: Fix memremap of setup_indirect structures
  x86/module: Fix the paravirt vs alternative order

Merge tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix event parser error for hybrid systems

 - Fix NULL check against wrong variable in 'perf bench' and in the
   parsing code

 - Update arm64 KVM headers from the kernel sources

 - Sync cpufeatures header with the kernel sources

* tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf parse: Fix event parser error for hybrid systems
  perf bench: Fix NULL check against wrong variable
  perf parse-events: Fix NULL check against wrong variable
  tools headers cpufeatures: Sync with the kernel sources
  tools kvm headers arm64: Update KVM headers from the kernel sources

Pull drm kconfig fix from Dave Airlie:
 "Thorsten pointed out this had fallen down the cracks and was in -next
  only, I've picked it out, fixed up it's Fixes: line.

   - fix regression in Kconfig"

* tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm:
  drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP

This bug happened on hybrid systems when both cpu_core and cpu_atom
have the same event name such as "UOPS_RETIRED.MS" while their event
terms are different, then during perf stat, the event for cpu_atom
will parse fail and then no output for cpu_atom.

UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/

It is because event terms in the "head" of parse_events_multi_pmu_add
will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS
for cpu_core, then when parsing the same event for cpu_atom, it still
uses the event terms for cpu_core, but event terms for cpu_atom are
different with cpu_core, the event parses for cpu_atom will fail. This
patch fixes it, the event terms should be parsed from the original
event.

This patch can work for the hybrid systems that have the same event
in more than 2 PMUs. It also can work in non-hybrid systems.

Before:

  # perf stat -v  -e  UOPS_RETIRED.MS  -a sleep 1

  Using CPUID GenuineIntel-6-97-1
  UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
  Control descriptor is not initialized
  UOPS_RETIRED.MS: 2737845 16068518485 16068518485

 Performance counter stats for 'system wide':

         2,737,845      cpu_core/UOPS_RETIRED.MS/

       1.002553850 seconds time elapsed

After:

  # perf stat -v  -e  UOPS_RETIRED.MS  -a sleep 1

  Using CPUID GenuineIntel-6-97-1
  UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
  UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
  Control descriptor is not initialized
  UOPS_RETIRED.MS: 1977555 16076950711 16076950711
  UOPS_RETIRED.MS: 568684 8038694234 8038694234

 Performance counter stats for 'system wide':

         1,977,555      cpu_core/UOPS_RETIRED.MS/
           568,684      cpu_atom/UOPS_RETIRED.MS/

       1.004758259 seconds time elapsed

Fixes: fb081153 ("perf parse-events: Allow config on kernel PMU events")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220307151627.30049-1-zhengjun.xing@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We did a NULL check after "epollfdp = calloc(...)", but we checked
"epollfd" instead of "epollfdp".
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/tencent_B5D64530EB9C7DBB8D2C88A0C790F1489D0A@qq.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We did a null check after "tmp->symbol = strdup(...)", but we checked
"list->symbol" other than "tmp->symbol".
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/tencent_DF39269807EC9425E24787E6DB632441A405@qq.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  d45476d9 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE")

Its just a comment fixup.

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/Y@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  a5905d6a ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")

That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h

Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/lkml/YiyhAK6sVPc83FaI@kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As reported in [1], DRM_PANEL_EDP depends on DRM_DP_HELPER. Select
the option to fix the build failure. The error message is shown
below.

  arm-linux-gnueabihf-ld: drivers/gpu/drm/panel/panel-edp.o: in function
    `panel_edp_probe': panel-edp.c:(.text+0xb74): undefined reference to
    `drm_panel_dp_aux_backlight'
  make[1]: *** [/builds/linux/Makefile:1222: vmlinux] Error 1

The issue has been reported before, when DisplayPort helpers were
hidden behind the option CONFIG_DRM_KMS_HELPER. [2]

v2:
	* fix and expand commit description (Arnd)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9d6366e7 ("drm: fb_helper: improve CONFIG_FB dependency")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/dri-devel/CA+G9fYvN0NyaVkRQmA1O6rX7H8PPaZrUAD7=RDy33QY9rUU-9g@mail.gmail.com/ # [1]
Link: https://lore.kernel.org/all/20211117062704.14671-1-rdunlap@infradead.org/ # [2]
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220203093922.20754-1-tzimmermann@suse.deSigned-off-by: Dave Airlie <airlied@redhat.com>

When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.

Fixes this build error:

  arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
  proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
  arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'

Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull RISC-V fixes from Palmer Dabbelt:

 - prevent users from enabling the alternatives framework (and thus
   errata handling) on XIP kernels, where runtime code patching does not
   function correctly.

 - properly detect offset overflow for AUIPC-based relocations in
   modules. This may manifest as modules calling arbitrary invalid
   addresses, depending on the address allocated when a module is
   loaded.

* tag 'riscv-for-linus-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix auipc+jalr relocation range checks
  riscv: alternative only works on !XIP_KERNEL

Pull powerpc fix from Michael Ellerman:
 "Fix STACKTRACE=n build, in particular for skiroot_defconfig"

* tag 'powerpc-5.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix STACKTRACE=n build

When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.

Fixes: b9baf5c8 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Restore (mostly) the busy polling for MMC_SEND_OP_COND

  MMC host:
   - meson-gx: Fix DMA usage of meson_mmc_post_req()"

* tag 'mmc-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND
  mmc: meson: Fix usage of meson_mmc_post_req()

There is a limited amount of SGX memory (EPC) on each system.  When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code.  Instead of
swapping to disk, SGX swaps from EPC to normal RAM.  That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code.  There is a hierarchy like this:

	EPC <-> shmem <-> disk

After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed.  Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running.  The
memory is recovered when the enclave is destroyed and the backing
storage freed.

Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC.  In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.

Cc: stable@vger.kernel.org
Fixes: 1728ab54 ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org

Merge misc fixes from David Howells:
 "A set of patches for watch_queue filter issues noted by Jann. I've
  added in a cleanup patch from Christophe Jaillet to convert to using
  formal bitmap specifiers for the note allocation bitmap.

  Also two filesystem fixes (afs and cachefiles)"

* emailed patches from David Howells <dhowells@redhat.com>:
  cachefiles: Fix volume coherency attribute
  afs: Fix potential thrashing in afs writeback
  watch_queue: Make comment about setting ->defunct more accurate
  watch_queue: Fix lack of barrier/sync/lock between post and read
  watch_queue: Free the alloc bitmap when the watch_queue is torn down
  watch_queue: Fix the alloc bitmap size to reflect notes allocated
  watch_queue: Use the bitmap API when applicable
  watch_queue: Fix to always request a pow-of-2 pipe ring size
  watch_queue: Fix to release page in ->release()
  watch_queue, pipe: Free watchqueue state after clearing pipe ring
  watch_queue: Fix filter limit check