Skip to content

L
linux
Switch branch/tag
  1. 07 Mar, 2020 4 commits
    • Madalin Bucur's avatar
      fsl/fman: detect FMan erratum A050385 · b281f7b9
      Madalin Bucur authored 
      Detect the presence of the A050385 erratum.
Signed-off-by: default avatarMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b281f7b9
    • Madalin Bucur's avatar
      arm64: dts: ls1043a: FMan erratum A050385 · b54d3900
      Madalin Bucur authored 
      The LS1043A SoC is affected by the A050385 erratum stating that
FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak thus stopping further packet processing.
Signed-off-by: default avatarMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b54d3900
    • Madalin Bucur's avatar
      dt-bindings: net: FMan erratum A050385 · 26d5bb9e
      Madalin Bucur authored 
      FMAN DMA read or writes under heavy traffic load may cause FMAN
internal resource leak; thus stopping further packet processing.

The FMAN internal queue can overflow when FMAN splits single
read or write transactions into multiple smaller transactions
such that more than 17 AXI transactions are in flight from FMAN
to interconnect. When the FMAN internal queue overflows, it can
stall further packet processing. The issue can occur with any one
of the following three conditions:

  1. FMAN AXI transaction crosses 4K address boundary (Errata
     A010022)
  2. FMAN DMA address for an AXI transaction is not 16 byte
     aligned, i.e. the last 4 bits of an address are non-zero
  3. Scatter Gather (SG) frames have more than one SG buffer in
     the SG list and any one of the buffers, except the last
     buffer in the SG list has data size that is not a multiple
     of 16 bytes, i.e., other than 16, 32, 48, 64, etc.

With any one of the above three conditions present, there is
likelihood of stalled FMAN packet processing, especially under
stress with multiple ports injecting line-rate traffic.

To avoid situations that stall FMAN packet processing, all of the
above three conditions must be avoided; therefore, configure the
system with the following rules:

  1. Frame buffers must not span a 4KB address boundary, unless
     the frame start address is 256 byte aligned
  2. All FMAN DMA start addresses (for example, BMAN buffer
     address, FD[address] + FD[offset]) are 16B aligned
  3. SG table and buffer addresses are 16B aligned and the size
     of SG buffers are multiple of 16 bytes, except for the last
     SG buffer that can be of any size.

Additional workaround notes:
- Address alignment of 64 bytes is recommended for maximally
efficient system bus transactions (although 16 byte alignment is
sufficient to avoid the stall condition)
- To support frame sizes that are larger than 4K bytes, there are
two options:
  1. Large single buffer frames that span a 4KB page boundary can
     be converted into SG frames to avoid transaction splits at
     the 4KB boundary,
  2. Align the large single buffer to 256B address boundaries,
     ensure that the frame address plus offset is 256B aligned.
- If software generated SG frames have buffers that are unaligned
and with random non-multiple of 16 byte lengths, before
transmitting such frames via FMAN, frames will need to be copied
into a new single buffer or multiple buffer SG frame that is
compliant with the three rules listed above.
Signed-off-by: default avatarMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      26d5bb9e
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf · 357ddbb9
      David S. Miller authored 
      Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Patches to bump position index from sysctl seq_next,
   from Vasilin Averin.

2) Release flowtable hook from error path, from Florian Westphal.

3) Patches to add missing netlink attribute validation,
   from Jakub Kicinski.

4) Missing NFTA_CHAIN_FLAGS in nf_tables_fill_chain_info().

5) Infinite loop in module autoload if extension is not available,
   from Florian Westphal.

6) Missing module ownership in inet/nat chain type definition.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      357ddbb9
  3. 06 Mar, 2020 4 commits
    • Pablo Neira Ayuso's avatar
      netfilter: nft_chain_nat: inet family is missing module ownership · 6a42cefb
      Pablo Neira Ayuso authored 
      Set owner to THIS_MODULE, otherwise the nft_chain_nat module might be
removed while there are still inet/nat chains in place.

[  117.942096] BUG: unable to handle page fault for address: ffffffffa0d5e040
[  117.942101] #PF: supervisor read access in kernel mode
[  117.942103] #PF: error_code(0x0000) - not-present page
[  117.942106] PGD 200c067 P4D 200c067 PUD 200d063 PMD 3dc909067 PTE 0
[  117.942113] Oops: 0000 [#1] PREEMPT SMP PTI
[  117.942118] CPU: 3 PID: 27 Comm: kworker/3:0 Not tainted 5.6.0-rc3+ #348
[  117.942133] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[  117.942145] RIP: 0010:nf_tables_chain_destroy.isra.0+0x94/0x15a [nf_tables]
[  117.942149] Code: f6 45 54 01 0f 84 d1 00 00 00 80 3b 05 74 44 48 8b 75 e8 48 c7 c7 72 be de a0 e8 56 e6 2d e0 48 8b 45 e8 48 c7 c7 7f be de a0 <48> 8b 30 e8 43 e6 2d e0 48 8b 45 e8 48 8b 40 10 48 85 c0 74 5b 8b
[  117.942152] RSP: 0018:ffffc9000015be10 EFLAGS: 00010292
[  117.942155] RAX: ffffffffa0d5e040 RBX: ffff88840be87fc2 RCX: 0000000000000007
[  117.942158] RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffffffffa0debe7f
[  117.942160] RBP: ffff888403b54b50 R08: 0000000000001482 R09: 0000000000000004
[  117.942162] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8883eda7e540
[  117.942164] R13: dead000000000122 R14: dead000000000100 R15: ffff888403b3db80
[  117.942167] FS:  0000000000000000(0000) GS:ffff88840e4c0000(0000) knlGS:0000000000000000
[  117.942169] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  117.942172] CR2: ffffffffa0d5e040 CR3: 00000003e4c52002 CR4: 00000000001606e0
[  117.942174] Call Trace:
[  117.942188]  nf_tables_trans_destroy_work.cold+0xd/0x12 [nf_tables]
[  117.942196]  process_one_work+0x1d6/0x3b0
[  117.942200]  worker_thread+0x45/0x3c0
[  117.942203]  ? process_one_work+0x3b0/0x3b0
[  117.942210]  kthread+0x112/0x130
[  117.942214]  ? kthread_create_worker_on_cpu+0x40/0x40
[  117.942221]  ret_from_fork+0x35/0x40

nf_tables_chain_destroy() crashes on module_put() because the module is
gone.

Fixes: d164385e ("netfilter: nat: add inet family nat support")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      6a42cefb
    • Paolo Abeni's avatar
      mptcp: always include dack if possible. · 2398e399
      Paolo Abeni authored 
      Currently passive MPTCP socket can skip including the DACK
option - if the peer sends data before accept() completes.

The above happens because the msk 'can_ack' flag is set
only after the accept() call.

Such missing DACK option may cause - as per RFC spec -
unwanted fallback to TCP.

This change addresses the issue using the key material
available in the current subflow, if any, to create a suitable
dack option when msk ack seq is not yet available.

v1 -> v2:
 - adavance the generated ack after the initial MPC packet

Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option")
Signed-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
Reviewed-by: default avatarMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2398e399
    • Dan Carpenter's avatar
      net: nfc: fix bounds checking bugs on "pipe" · a3aefbfe
      Dan Carpenter authored 
      This is similar to commit 674d9de0 ("NFC: Fix possible memory
corruption when handling SHDLC I-Frame commands") and commit d7ee81ad
("NFC: nci: Add some bounds checking in nci_hci_cmd_received()") which
added range checks on "pipe".

The "pipe" variable comes skb->data[0] in nfc_hci_msg_rx_work().
It's in the 0-255 range.  We're using it as the array index into the
hdev->pipes[] array which has NFC_HCI_MAX_PIPES (128) members.

Fixes: 118278f2 ("NFC: hci: Add pipes table to reference them with a tuple {gate, host}")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a3aefbfe
    • Jiang Lidong's avatar
      veth: ignore peer tx_dropped when counting local rx_dropped · e25d5dbc
      Jiang Lidong authored 
      When local NET_RX backlog is full due to traffic overrun,
peer veth tx_dropped counter increases. At that time, list
local veth stats, rx_dropped has double value of peer
tx_dropped, even bigger than transmit packets by peer.

In NET_RX softirq process, if any packet drop case happens,
it increases dev's rx_dropped counter and returns NET_RX_DROP.

At veth tx side, it records any error returned from peer netif_rx
into local dev tx_dropped counter.

In veth get stats process, it puts local dev rx_dropped and
peer dev tx_dropped into together as local rx_drpped value.
So that it shows double value of real dropped packets number in
this case.

This patch ignores peer tx_dropped when counting local rx_dropped,
since peer tx_dropped is duplicated to local rx_dropped at most cases.
Signed-off-by: default avatarJiang Lidong <jianglidong3@jd.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e25d5dbc
  5. 05 Mar, 2020 6 commits
    • David S. Miller's avatar
      Merge tag 'wireless-drivers-2020-03-05' of... · 2f63f2d5
      David S. Miller authored 
      Merge tag 'wireless-drivers-2020-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.6

Second set of fixes for v5.6. Only two small fixes this time.

iwlwifi

* fix another initialisation regression with 3168 devices

mt76

* fix memory corruption with too many rx fragments
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2f63f2d5
    • Tom Zhao's avatar
      sfc: complete the next packet when we receive a timestamp · 3b4f06c7
      Tom Zhao authored 
      We now ignore the "completion" event when using tx queue timestamping,
and only pay attention to the two (high and low) timestamp events. The
NIC will send a pair of timestamp events for every packet transmitted.
The current firmware may merge the completion events, and it is possible
that future versions may reorder the completion and timestamp events.
As such the completion event is not useful.

Without this patch in place a merged completion event on a queue with
timestamping will cause a "spurious TX completion" error. This affects
SFN8000-series adapters.
Signed-off-by: default avatarTom Zhao <tzhao@solarflare.com>
Acked-by: default avatarMartin Habets <mhabets@solarflare.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3b4f06c7
    • Jian Shen's avatar
      net: hns3: fix a not link up issue when fibre port supports autoneg · 68e1006f
      Jian Shen authored 
      When fibre port supports auto-negotiation, the IMP(Intelligent
Management Process) processes the speed of auto-negotiation
and the  user's speed separately.
For below case, the port will get a not link up problem.
step 1: disables auto-negotiation and sets speed to A, then
the driver's MAC speed will be updated to A.
step 2: enables auto-negotiation and MAC gets negotiated
speed B, then the driver's MAC speed will be updated to B
through querying in periodical task.
step 3: MAC gets new negotiated speed A.
step 4: disables auto-negotiation and sets speed to B before
periodical task query new MAC speed A, the driver will  ignore
the speed configuration.

This patch fixes it by skipping speed and duplex checking when
fibre port supports auto-negotiation.

Fixes: 22f48e24 ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: default avatarJian Shen <shenjian15@huawei.com>
Signed-off-by: default avatarHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      68e1006f
    • Eric Dumazet's avatar
      slip: make slhc_compress() more robust against malicious packets · 110a40df
      Eric Dumazet authored 
      Before accessing various fields in IPV4 network header
and TCP header, make sure the packet :

- Has IP version 4 (ip->version == 4)
- Has not a silly network length (ip->ihl >= 5)
- Is big enough to hold network and transport headers
- Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4)

syzbot reported :

BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270
CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x220 lib/dump_stack.c:118
 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118
 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215
 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270
 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline]
 __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495
 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516
 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512
 do_loop_readv_writev fs/read_write.c:717 [inline]
 do_iter_write+0x812/0xdc0 fs/read_write.c:1000
 compat_writev+0x2df/0x5a0 fs/read_write.c:1351
 do_compat_pwritev64 fs/read_write.c:1400 [inline]
 __do_compat_sys_pwritev fs/read_write.c:1420 [inline]
 __se_compat_sys_pwritev fs/read_write.c:1414 [inline]
 __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f7cd99
Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline]
 kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127
 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82
 slab_alloc_node mm/slub.c:2793 [inline]
 __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401
 __kmalloc_reserve net/core/skbuff.c:142 [inline]
 __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210
 alloc_skb include/linux/skbuff.h:1051 [inline]
 ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500
 do_loop_readv_writev fs/read_write.c:717 [inline]
 do_iter_write+0x812/0xdc0 fs/read_write.c:1000
 compat_writev+0x2df/0x5a0 fs/read_write.c:1351
 do_compat_pwritev64 fs/read_write.c:1400 [inline]
 __do_compat_sys_pwritev fs/read_write.c:1420 [inline]
 __se_compat_sys_pwritev fs/read_write.c:1414 [inline]
 __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414
 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline]
 do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410
 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139

Fixes: b5451d78 ("slip: Move the SLIP drivers")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      110a40df
    • Florian Westphal's avatar
      netfilter: nf_tables: fix infinite loop when expr is not available · 1d305ba4
      Florian Westphal authored 
      nft will loop forever if the kernel doesn't support an expression:

1. nft_expr_type_get() appends the family specific name to the module list.
2. -EAGAIN is returned to nfnetlink, nfnetlink calls abort path.
3. abort path sets ->done to true and calls request_module for the
   expression.
4. nfnetlink replays the batch, we end up in nft_expr_type_get() again.
5. nft_expr_type_get attempts to append family-specific name. This
   one already exists on the list, so we continue
6. nft_expr_type_get adds the generic expression name to the module
   list. -EAGAIN is returned, nfnetlink calls abort path.
7. abort path encounters the family-specific expression which
   has 'done' set, so it gets removed.
8. abort path requests the generic expression name, sets done to true.
9. batch is replayed.

If the expression could not be loaded, then we will end up back at 1),
because the family-specific name got removed and the cycle starts again.

Note that userspace can SIGKILL the nft process to stop the cycle, but
the desired behaviour is to return an error after the generic expr name
fails to load the expression.

Fixes: eb014de4 ("netfilter: nf_tables: autoload modules from the abort path")
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      1d305ba4
    • Pablo Neira Ayuso's avatar
      netfilter: nf_tables: dump NFTA_CHAIN_FLAGS attribute · d78008de
      Pablo Neira Ayuso authored 
      Missing NFTA_CHAIN_FLAGS netlink attribute when dumping basechain
definitions.

Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
      d78008de
  7. 04 Mar, 2020 14 commits
  9. 03 Mar, 2020 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7