p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.

To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: 9745fb07 ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/
Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].

This series of keypress events can be observed in the kernel log on
resume.

```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```

In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.

Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.

Cc: Kieran Levin <ktl@framework.net>
Link: https://github.com/FrameworkComputer/EmbeddedController/blob/lotus-zephyr/zephyr/program/lotus/azalea/src/power_sequence.c#L313 [1]
Link: https://community.frame.work/t/amd-wont-sleep-properly/41755
Link: https://community.frame.work/t/tracking-framework-amd-ryzen-7040-series-lid-wakeup-behavior-feedback/39128Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-5-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-4-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future.  Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-3-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The platform defines will be used by the quirks in the future,
so move them to the common header to allow use by both source
files.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231212045006.97581-2-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.

Fixes: 2bcef452 ("platform/x86:intel/pmc: Enable debugfs multiple PMC support")
Signed-off-by: Rajvi Jingar <rajvi.jingar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231216011650.1973941-1-rajvi.jingar@linux.intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@gmail.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Fix kernel-doc function notation and comment formatting to prevent
warnings from scripts/kernel-doc.

for drivers/platform/x86/intel_ips.c:
595: warning: No description found for return value of 'mcp_exceeded'
624: warning: No description found for return value of 'cpu_exceeded'
650: warning: No description found for return value of 'mch_exceeded'
745: warning: bad line:                 cpu+ gpu+       cpu+gpu-        cpu-gpu+        cpu-gpu-
746: warning: bad line: cpu < gpu <     cpu+gpu+        cpu+            gpu+            nothing
753: warning: No description found for return value of 'ips_adjust'
747: warning: bad line: cpu < gpu >=    cpu+gpu-(mcp<)  cpu+gpu-(mcp<)  gpu-            gpu-
748: warning: bad line: cpu >= gpu <    cpu-gpu+(mcp<)  cpu-            cpu-gpu+(mcp<)  cpu-
749: warning: bad line: cpu >= gpu >=   cpu-gpu-        cpu-gpu-        cpu-gpu-        cpu-gpu-
945: warning: No description found for return value of 'ips_monitor'
1151: warning: No description found for return value of 'ips_irq_handler'
1301: warning: Function parameter or member 'ips' not described in 'ips_detect_cpu'
1302: warning: No description found for return value of 'ips_detect_cpu'
1358: warning: No description found for return value of 'ips_get_i915_syms'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org
Link: https://lore.kernel.org/r/20231206060120.4816-1-rdunlap@infradead.orgReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Add a function's return description and don't misuse "/**" for
non-kernel-doc comments to prevent warnings from scripts/kernel-doc.

thinkpad_acpi.c:523: warning: No description found for return value of 'tpacpi_check_quirks'
thinkpad_acpi.c:9307: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
thinkpad_acpi.c:9307: warning: missing initial short description on line:
 * This evaluates a ACPI method call specific to the battery
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
CC: ibm-acpi-devel@lists.sourceforge.net
CC: platform-driver-x86@vger.kernel.org
Reviewed-by: mpearson-lenovo@squebb.ca
Link: https://lore.kernel.org/r/20231206060144.8260-1-rdunlap@infradead.orgReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

2 issues have been reported on the Dell Inspiron 7352:

1. Sometimes the tablet-mode-switch stops reporting tablet-mode
   change events.

   Add a "VBDL" call to notify_handler() to work around this.

2. Sometimes the tablet-mode is incorrect after suspend/resume

   Add a detect_tablet_mode() to resume() to fix this.
Reported-by: Arnold Gozum <arngozum@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/87271a74-c831-4eec-b7a4-1371d0e42471@gmail.com/Tested-by: Arnold Gozum <arngozum@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20231204150601.46976-1-hdegoede@redhat.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

devm_hwmon_device_register_with_groups() returns an error pointer upon
failure. Check its return value for errors.

Compile-tested only.

Fixes: 1a218d31 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.

Compile-tested only.

Fixes: 1a218d31 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20231201055447.2356001-1-chentao@kylinos.cn
[ij: split the change into two]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The secure boot state of the BlueField SoC is represented by two bits:
                0 = production state
                1 = secure boot enabled
                2 = non-secure (secure boot disabled)
                3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).

The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.

Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.

Fixes: 79e29cb8 ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20231130183515.17214-1-davthompson@nvidia.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.
Reported-by: Alexis Belmonte <alexbelm48@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218188
Fixes: bff431e4 ("ACPI: WMI: Add ACPI-WMI mapping driver")
Tested-by: Alexis Belmonte <alexbelm48@gmail.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20231129181654.5800-1-W_Armin@gmx.deReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.

Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.

This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().

Fixes: c167b9c7 ("platform/surface: Add Surface Aggregator subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20231128194935.11350-1-francesco@dolcini.itReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

ASUS have worked around an issue in XInput where it doesn't support USB
selective suspend, which causes suspend issues in Windows. They worked
around this by adjusting the MCU firmware to disable the USB0 hub when
the screen is switched off during the Microsoft DSM suspend path in ACPI.

The issue we have with this however is one of timing - the call the tells
the MCU to this isn't able to complete before suspend is done so we call
this in a prepare() and add a small msleep() to ensure it is done. This
must be done before the screen is switched off to prevent a variety of
possible races.

Further to this the MCU powersave option must also be disabled as it can
cause a number of issues such as:
- unreliable resume connection of N-Key
- complete loss of N-Key if the power is plugged in while suspended
Disabling the powersave option prevents this.

Without this the MCU is unable to initialise itself correctly on resume.
Signed-off-by: "Luke D. Jones" <luke@ljones.dev>
Tested-by: Philip Mueller <philm@manjaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231126230521.125708-2-luke@ljones.devSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Use the i8042-filter to check if Volume key presses are also reported
via atkbd and if yes then filter out the WMI events to avoid reporting
each key-press twice.

Note depending on in which order the PS/2 data vs the WMI event are
handled the first volume key press may still be reported twice. This is
a compromise versus DMI quirks (unmaintainable) or other more complex
solutions.

Closes: https://bbs.archlinux.org/viewtopic.php?pid=2128536#p2128536Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-4-hdegoede@redhat.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Change asus_q500a_i8042_filter() into a generic i8042-filter,
using a new filter_i8042_e1_extended_codes flag in the quirks struct
to decide if e1 extended codes should be filtered out or not.

This is a preparation patch for adding support for filtering volume key
events being reported twice through both the PS/2 keyboard and asus-wmi.

Note while modifying the code also drop the unnecessary unlikely()
annotations, this is not in a hot path so those are not necessary.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-3-hdegoede@redhat.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.

Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.

Fixes: b5643539 ("platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A")
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231120154235.610808-2-hdegoede@redhat.comReviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

LKP found issues with a kernel doc in the driver:

core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'

It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.comReviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Mark has not really been active as maintainer for x86 platform drivers
lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86,
drivers/platform/mellanox and drivers/platform/surface.

Cc: Mark Gross <markgross@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20231120154548.611041-1-hdegoede@redhat.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

amd_pmc_get_dram_size() is used to get the DRAM size information. But
in the current code, mailbox command to get the DRAM size info is sent
based on the values of dev->major and dev->minor.

But dev->major and dev->minor will have either junk or zero assigned to
them until at least once a call to amd_pmc_get_smu_version() is made
which ideally populates dev->major and dev->minor.

However, adding a amd_pmc_get_smu_version() call to
amd_pmc_get_dram_size() has a downside of elevating the boot times.

After talking to the PMFW team, it's understood that the "get dram
size" mbox command would only be supported on specific platforms (like
Mendocino) and not all. So, adjust getting DRAM size behavior such
that,

- if running on Rembrandt or Mendocino and the underlying PMFW knows
how to execute the "get dram size" command it shall give the custom
dram size.

- if the underlying FW does not report the dram size, we just proceed
further and assign the default dram size.

The simplest way to address this is to remove amd_pmc_get_dram_size()
function and directly call the "get dram size" command in the
amd_pmc_s2d_init().
Reported-by: Mark Hasemeyer <markhas@chromium.org>
Fixes: be8325fb ("platform/x86/amd: pmc: Get STB DRAM size from PMFW")
Cc: stable@vger.kernel.org
Suggested-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20231116170121.3372222-1-Shyam-sundar.S-k@amd.comReviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

acpi_object *obj is unused in this function, so delete it, also
delete a unnecessary kfree(obj);
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-4-harshit.m.mogalapalli@oracle.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.

Fix the error path before kobject_init_and_add() by adding kfree().

kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.

Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().

Fixes: a34fc329 ("platform/x86: hp-bioscfg: bioscfg")
Cc: stable@vger.kernel.org # 6.6.x: c5dbf041: platform/x86: hp-bioscfg: Simplify return check in hp_add_other_attributes()
Cc: stable@vger.kernel.org # 6.6.x: 5736aa95: platform/x86: hp-bioscfg: move mutex_lock() down in hp_add_other_attributes()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202309201412.on0VXJGo-lkp@intel.com/Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
[ij: Added the stable dep tags]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-3-harshit.m.mogalapalli@oracle.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

attr_name_kobj's memory allocation is done with mutex_lock() held, this
is not needed.

Move allocation outside of mutex_lock() so unlock is not needed when
allocation fails.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-2-harshit.m.mogalapalli@oracle.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

All cases in switch-case have a same goto on error, move the return
check out of the switch. This is a cleanup.
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231113200742.3593548-1-harshit.m.mogalapalli@oracle.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

max_brightness is used in ideapad_kbd_bl_brightness_get() before it's set,
causing ideapad_kbd_bl_brightness_get() to return -EINVAL sometimes.

Fixes: ecaa1867 ("platform/x86: ideapad-laptop: Add support for keyboard backlights using KBLC ACPI symbol")
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20231114114055.6220-2-stuart.a.hayhurst@gmail.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

Maurice is no longer with Intel and his e-mail address is no longer
active. Remove the stale entry from Slim boot loader section.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20231102195218.143440-1-jithu.joseph@intel.comSigned-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers

Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - Documentation update: Add a note about argument and return value
   fetching is the best effort because it depends on the type.

 - objpool: Fix to make internal global variables static in
   test_objpool.c.

 - kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
   same prototypes in asm/kprobes.h for some architectures, but some of
   them are missing the prototype and it causes a warning. So move the
   prototype into linux/kprobes.h.

 - tracing: Fix to check the tracepoint event and return event at
   parsing stage. The tracepoint event doesn't support %return but if
   $retval exists, it will be converted to %return silently. This finds
   that case and rejects it.

 - tracing: Fix the order of the descriptions about the parameters of
   __kprobe_event_gen_cmd_start() to be consistent with the argument
   list of the function.

* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix the order of argument descriptions
  tracing: fprobe-event: Fix to check tracepoint event and return
  kprobes: unify kprobes_exceptions_nofify() prototypes
  lib: test_objpool: make global variables static
  Documentation: tracing: Add a note about argument and retval access

Pull fbdev fixes and cleanups from Helge Deller:

 - fix double free and resource leaks in imsttfb

 - lots of remove callback cleanups and section mismatch fixes in
   omapfb, amifb and atmel_lcdfb

 - error code fix and memparse simplification in omapfb

* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
  fbdev: fsl-diu-fb: mark wr_reg_wa() static
  fbdev: amifb: Convert to platform remove callback returning void
  fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
  fbdev: hyperv_fb: fix uninitialized local variable use
  fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
  fbdev: omapfb/tfp410: Convert to platform remove callback returning void
  fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
  fbdev: omapfb/opa362: Convert to platform remove callback returning void
  fbdev: omapfb/hdmi: Convert to platform remove callback returning void
  fbdev: omapfb/dvi: Convert to platform remove callback returning void
  fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
  fbdev: omapfb/dpi: Convert to platform remove callback returning void
  fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
  fbdev: atmel_lcdfb: Convert to platform remove callback returning void
  fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
  ...

The order of descriptions should be consistent with the argument list of
the function, so "kretprobe" should be the second one.

int __kprobe_event_gen_cmd_start(struct dynevent_cmd *cmd, bool kretprobe,
                                 const char *name, const char *loc, ...)

Link: https://lore.kernel.org/all/20231031041305.3363712-1-yujie.liu@intel.com/

Fixes: 2a588dd1 ("tracing: Add kprobe event command generation functions")
Suggested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Pull drm fixes from Daniel Vetter:
 "Dave's VPN to the big machine died, so it's on me to do fixes pr this
  and next week while everyone else is at plumbers.

   - big pile of amd fixes, but mostly for hw support newly added in 6.7

   - i915 fixes, mostly minor things

   - qxl memory leak fix

   - vc4 uaf fix in mock helpers

   - syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"

* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
  drm/amdgpu: fix error handling in amdgpu_vm_init
  drm/amdgpu: Fix possible null pointer dereference
  drm/amdgpu: move UVD and VCE sched entity init after sched init
  drm/amdgpu: move kfd_resume before the ip late init
  drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
  drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
  drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
  drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
  drm/amdgpu: fix software pci_unplug on some chips
  drm/amd/display: remove duplicated argument
  drm/amdgpu: correct mca debugfs dump reg list
  drm/amdgpu: correct acclerator check architecutre dump
  drm/amdgpu: add pcs xgmi v6.4.0 ras support
  drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
  drm/amdgpu: disable smu v13.0.6 mca debug mode by default
  drm/amdgpu: Support multiple error query modes
  drm/amdgpu: refine smu v13.0.6 mca dump driver
  drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
  drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
  drm: amd: Resolve Sphinx unexpected indentation warning
  ...

Pull arm64 fixes from Catalin Marinas:
 "Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
  MediaTek firmware:

   - Move the MediaTek GIC quirk handling from irqchip to core. Before
     the merging window commit 44bd78dd ("irqchip/gic-v3: Disable
     pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
     addressed this issue. Fixed now at a deeper level in the arch code

   - Reject events meant for other PMUs in the CoreSight PMU driver,
     otherwise some of the core PMU events would disappear

   - Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
     causing some events to be invisible

   - Remove duplicate declaration of __arm64_sys##name following the
     patch to avoid prototype warning for syscalls

   - Typos in the elf_hwcap documentation"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/syscall: Remove duplicate declaration
  Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
  arm64: Move MediaTek GIC quirk handling from irqchip to core
  arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
  perf: arm_cspmu: Reject events meant for other PMUs
  Documentation/arm64: Fix typos in elf_hwcaps

Pull sound fixes from Takashi Iwai:
 "A collection of fixes for rc1.

  The majority of changes are various ASoC driver-specific small fixes
  and usual HD-audio quirks, while there are a couple of core changes: a
  fix in ALSA core procfs code to avoid deadlocks at disconnection and
  an ASoC core fix for DAPM clock widgets"

* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  OSS: dmasound/paula: Convert to platform remove callback returning void
  ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
  ALSA: info: Fix potential deadlock at disconnection
  ASoC: nau8540: Add self recovery to improve capture quility
  ALSA: hda/realtek: Add support dual speaker for Dell
  ALSA: hda: Add ASRock X670E Taichi to denylist
  ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
  ASoC: SOF: sof-client: trivial: fix comment typo
  ASoC: dapm: fix clock get name
  ASoC: hdmi-codec: register hpd callback on component probe
  ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
  ASoC: da7219: Improve system suspend and resume handling
  ASoC: codecs: Modify macro value error
  ASoC: codecs: Modify the wrong judgment of re value
  ASoC: codecs: Modify the maximum value of calib
  ASoC: amd: acp: fix for i2s mode register field update
  ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
  ASoC: rt712-sdca: fix speaker route missing issue
  ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
  ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings