Add device dependent control report id, secondary control report id,
secondary control report size and secondary control report for devices
which need different control report settings. All currently supported
devices use the same values.
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20230214220221.15003-4-leonard.anderweit@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add new function aqc_set_ctrl_vals() to support changing multiple control
values at once while sending only one control report.
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20230214220221.15003-3-leonard.anderweit@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Add support for one byte control values. This extends aqc_set_ctrl_val()
and aqc_get_ctrl_val() with a type. Currently supported types are AQC_8
(one byte) and AQC_BE16 (two bytes big endian). More types will be added
in the future.
Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com>
Link: https://lore.kernel.org/r/20230214220221.15003-2-leonard.anderweit@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Tested on Z590M-PLUS.

dmesg log:
nct6775: Found NCT6798D or compatible chip at 0x2e:0x290

sensors output:
nct6798-isa-0290
Adapter: ISA adapter
in0:                      672.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                        3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                        3.28 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                        1.01 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                      808.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                      1000.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                        3.38 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                        3.20 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                      528.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                     672.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                     528.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                       1.21 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                     992.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                       1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                      971 RPM  (min =    0 RPM)
fan2:                     1525 RPM  (min =    0 RPM)
fan3:                        0 RPM  (min =    0 RPM)
fan4:                     1094 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                        0 RPM  (min =    0 RPM)
fan7:                        0 RPM  (min =    0 RPM)
SYSTIN:                    +36.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
CPUTIN:                    +40.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                   +26.0°C    sensor = thermistor
AUXTIN1:                    +8.0°C    sensor = thermistor
AUXTIN2:                   +22.0°C    sensor = thermistor
AUXTIN3:                   +25.0°C    sensor = thermistor
PECI Agent 0 Calibration:  +40.0°C
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C
PCH_CHIP_TEMP:             +55.0°C
PCH_CPU_TEMP:               +0.0°C
intrusion0:               OK
intrusion1:               ALARM
beep_enable:              disabled
Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20230227090312.91091-1-erik@kryo.seSigned-off-by: Guenter Roeck <linux@roeck-us.net>

devm_add_action may fails, check it and do the cleanup.
Signed-off-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/r/20230227030913.893004-1-void0red@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

1. replace the devm_add_action with devm_add_action_or_reset to ensure
the mutex lock can be destroyed when it fails.
2. use local wrapper function mutex_fini instead of mutex_destroy to
avoid undefined behaviours.
3. add a check of devm_add_action_or_reset and return early when it fails.

Link: https://lore.kernel.org/all/f5043281-9b3e-e454-16fe-ef4cde36dfdb@roeck-us.netSigned-off-by: Kang Chen <void0red@gmail.com>
Link: https://lore.kernel.org/r/20230227091534.907101-1-void0red@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The Fujitsu OEM Mainboard business was acquired by Kontron,
so the specifications of the Teutates chip was transferred to
the new Kontron FTP server.

Update the specifications website accordingly. The outdated
sensors how-to was omitted.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20230226014830.10929-1-W_Armin@gmx.deSigned-off-by: Guenter Roeck <linux@roeck-us.net>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144706.1542434-1-robh@kernel.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230310144707.1542525-1-robh@kernel.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The 64-bit result will be cut to 32-bit automatically (by compiler)
due to the type of the destination value. No need to have an explicit
casting and especially additional conjunction which does the same.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230217191600.24837-1-andriy.shevchenko@linux.intel.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

This seems to be a new revision of the device. RGB controls have changed,
but this driver doesn't touch them anyway.

Fan speed control reported to be working with existing userspace (hidraw)
software, so I assume it's compatible. Fan channel count is the same.

Recently added (0x1e71, 0x2019) seems to be the same device.

Discovered in liquidctl project:

https://github.com/liquidctl/liquidctl/issues/541Signed-off-by: Aleksandr Mezin <mezin.alexander@gmail.com>
Link: https://lore.kernel.org/r/20230219105924.333007-1-mezin.alexander@gmail.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here).  This
also fixes !CONFIG_OF error:

  drivers/hwmon/gpio-fan.c:484:34: error: ‘of_gpio_fan_match’ defined but not used [-Werror=unused-const-variable=]

Note(groeck): The build error is only seen if Kconfig dependencies
are messed up. The driver depends on OF_GPIO which should depend
on OF. This was temporarily broken in linux-next, and it was
possible to select CONFIG_OF=n and CONFIG_SENSORS_GPIO_FAN=y.
Nevertheless, this is a sensible fix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312193723.478032-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Spec says, when CUR_TEMP_TJ_SEL == 3 and CUR_TEMP_RANGE_SEL == 0,
it should use RangeUnadjusted is 0, which is (CurTmp*0.125 -49) C. The
CUR_TEMP register is read-write when CUR_TEMP_TJ_SEL == 3 (bit 17-16).

Add the check to detect it.

Sensors command's output before the patch.
$sensors
 k10temp-pci-00c3
 Adapter: PCI adapter
 Tctl:         +76.6°C <- Wrong value
 Tccd1:        +26.5°C
 Tccd2:        +27.5°C
 Tccd3:        +27.2°C
 Tccd4:        +27.5°C
 Tccd5:        +26.0°C
 Tccd6:        +26.2°C
 Tccd7:        +25.0°C
 Tccd8:        +26.5°C

Sensors command's output after the patch.
$sensors
 k10temp-pci-00c3
 Adapter: PCI adapter
 Tctl:         +28.8°C <- corrected value
 Tccd1:        +27.5°C
 Tccd2:        +28.5°C
 Tccd3:        +28.5°C
 Tccd4:        +28.5°C
 Tccd5:        +27.0°C
 Tccd6:        +27.5°C
 Tccd7:        +27.0°C
 Tccd8:        +27.5°C
Signed-off-by: Babu Moger <babu.moger@amd.com>
Fixes: 1b597889 ("hwmon: (k10temp) Add temperature offset for Ryzen 2700X")
Link: https://lore.kernel.org/r/20230413213958.847634-1-babu.moger@amd.com
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

HWmon core receives an array of pointers to hwmon_channel_info and it
does not modify it, thus it can be array of const pointers for safety.
This allows drivers to make them also const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull btrfs fixes from David Sterba:

 - scan block devices in non-exclusive mode to avoid temporary mkfs
   failures

 - fix race between quota disable and quota assign ioctls

 - fix deadlock when aborting transaction during relocation with scrub

 - ignore fiemap path cache when there are multiple paths for a node

* tag 'for-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: ignore fiemap path cache when there are multiple paths for a node
  btrfs: fix deadlock when aborting transaction during relocation with scrub
  btrfs: scan device in non-exclusive mode
  btrfs: fix race between quota disable and quota assign ioctls

This reverts commit a837e516, which broke probing of the venus
driver, at least on the SC7180 SoC HP X2 Chromebook:

  qcom-venus aa00000.video-codec: Adding to iommu group 11
  qcom-venus aa00000.video-codec: non legacy binding
  qcom-venus aa00000.video-codec: failed to reset venus core
  qcom-venus: probe of aa00000.video-codec failed with error -110

Matthias Kaehlcke also reported that the same change caused a regression
in SC7180 and sc7280, that prevents AOSS from entering sleep mode during
system suspend.  So let's revert this commit for now to fix both issues.

Fixes: a837e516 ("venus: firmware: Correct non-pix start and end addresses")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull driver core fixes from Greg KH:
 "Here are three small changes for 6.3-rc5 semi-related to driver core
  stuff:

   - documentation update where we move the security_bugs file to a more
     relevant location.

   - mdt/spi-nor debugfs memory leak fix that's been floating around for
     a long time and acked by the maintainer

   - cacheinfo bugfix for a regression in 6.3-rc1

  All have been in linux-next with no reported problems"

* tag 'driver-core-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  cacheinfo: Fix LLC is not exported through sysfs
  Documentation/security-bugs: move from admin-guide/ to process/
  mtd: spi-nor: fix memory leak when using debugfs_lookup()

Pull powerpc fixes from Michael Ellerman:

 - Fix a false positive warning in __pte_needs_flush() (with DEBUG_VM=y)

 - Fix oops when a PF_IO_WORKER thread tries to core dump

 - Don't try to reconfigure VAS when it's disabled

Thanks to Benjamin Gray, Haren Myneni, Jens Axboe, Nathan Lynch, and
Russell Currey.

* tag 'powerpc-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries/vas: Ignore VAS update for DLPAR if copy/paste is not enabled
  powerpc: Don't try to copy PPR for task with NULL pt_regs
  powerpc/64s: Fix __pte_needs_flush() false positive warning

Pull cifs client fixes from Steve French:
 "Four cifs/smb3 client (reconnect and DFS related) fixes, including two
  for stable:

   - DFS oops fix

   - DFS reconnect recursion fix

   - An SMB1 parallel reconnect fix

   - Trivial dead code removal in smb2_reconnect"

* tag '6.3-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: get rid of dead check in smb2_reconnect()
  cifs: prevent infinite recursion in CIFSGetDFSRefer()
  cifs: avoid races in parallel reconnects in smb1
  cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL

Pull input fixes from Dmitry Torokhov:

 - fixes to ALPS and Focaltech PS/2 drivers dealing with the breakage of
   switching to -funsigned-char

 - quirks to i8042 to better handle Lifebook A574/H and TUXEDO devices

 - a quirk to Goodix touchscreen driver to handle Yoga Book X90F

 - a fix for incorrectly merged patch to xpad game controller driver

* tag 'input-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add TUXEDO devices to i8042 quirk tables for partial fix
  Input: alps - fix compatibility with -funsigned-char
  Input: focaltech - use explicitly signed char type
  Input: xpad - fix incorrectly applied patch for MAP_PROFILE_BUTTON
  Input: goodix - add Lenovo Yoga Book X90F to nine_bytes_report DMI table
  Input: i8042 - add quirk for Fujitsu Lifebook A574/H

Pull pin control fixes from Linus Walleij:
 "Some pin control fixes for the v6.3 series.

  The most notable and urgent one is probably the AMD fix which affects
  AMD laptops, found by the Chromium people.

  Summary:

   - Fix up the Kconfig options for MediaTek MT7981

   - Fix the irq domain name in the AT91-PIO4 driver

   - Fix some alternative muxing modes in the Ocelot driver

   - Allocate the GPIO numbers dynamically in the STM32 driver

   - Disable and mask interrupts on resume in the AMD driver

   - Fix a typo in the Qualcomm SM8550 pin control device tree bindings"

* tag 'pinctrl-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  dt-bindings: pinctrl: qcom,sm8550-lpass-lpi: allow input-enabled and bias-bus-hold
  pinctrl: amd: Disable and mask interrupts on resume
  pinctrl: stm32: use dynamic allocation of GPIO base
  pinctrl: ocelot: Fix alt mode for ocelot
  pinctrl: at91-pio4: fix domain name assignment
  pinctrl: mediatek: fix naming inconsistency
  pinctrl: mediatek: add missing options to PINCTRL_MT7981

Merge tag 'kbuild-fixes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix linux-headers debian package

 - Fix a merge_config.sh error due to a misspelled variable

 - Fix modversion for 32-bit build machines

* tag 'kbuild-fixes-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: Fix processing of CRCs on 32-bit build machines
  scripts: merge_config: Fix typo in variable name.
  kbuild: deb-pkg: set version for linux-headers paths

Pull iommu fixes from Joerg Roedel:

 - Maintainer update for S390 IOMMU driver

 - A fix for the set_platform_dma_ops() call-back in the Exynos
   IOMMU driver

 - Intel VT-d fixes from Lu Baolu:
    - Fix a lockdep splat
    - Fix a supplement of the specification
    - Fix a warning in perfmon code

* tag 'iommu-fixes-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Fix an IOMMU perfmon warning when CPU hotplug
  iommu/vt-d: Allow zero SAGAW if second-stage not supported
  iommu/vt-d: Remove unnecessary locking in intel_irq_remapping_alloc()
  iommu/exynos: Fix set_platform_dma_ops() callback
  MAINTAINERS: Update s390-iommu driver maintainer information

The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper that
requires a __maybe_unused annotation to avoid a warning:

  drivers/media/i2c/imx290.c:1082:12: error: unused function 'imx290_runtime_resume' [-Werror,-Wunused-function]
  static int imx290_runtime_resume(struct device *dev)
             ^
  drivers/media/i2c/imx290.c:1090:12: error: unused function 'imx290_runtime_suspend' [-Werror,-Wunused-function]
  static int imx290_runtime_suspend(struct device *dev)
             ^

Convert this to the new RUNTIME_PM_OPS() helper that so this is not
required.  To improve this further, also use the pm_ptr() helper that
lets the dev_pm_ops get dropped entirely when CONFIG_PM is disabled.

A related mistake happened in the of_match_ptr() macro here, which like
SET_RUNTIME_PM_OPS() requires the match table to be marked as
__maybe_unused, though I could not reproduce building this without
CONFIG_OF.  Remove the of_match_ptr() here as there is no point in
dropping the match table in configurations without CONFIG_OF.

Fixes: 02852c01 ("media: i2c: imx290: Initialize runtime PM before subdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NFS client fixes from Anna Schumaker:

 - Fix shutdown of NFS TCP client sockets

 - Fix hangs when recovering open state after a server reboot

* tag 'nfs-for-6.3-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  SUNRPC: fix shutdown of NFS TCP client socket
  NFSv4: Fix hangs when recovering open state after a server reboot

Merge tag 'platform-drivers-x86-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 - Fix a regression in ideapad-laptop which caused the touchpad to stop
   working after a suspend/resume on some models

 - One other small fix and three hw-id additions

* tag 'platform-drivers-x86-v6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: ideapad-laptop: Stop sending KEY_TOUCHPAD_TOGGLE
  platform/x86: asus-nb-wmi: Add quirk_asus_tablet_mode to other ROG Flow X13 models
  platform/x86: gigabyte-wmi: add support for X570S AORUS ELITE
  platform/x86: gigabyte-wmi: add support for B650 AORUS ELITE AX
  platform/x86/intel/pmc: Alder Lake PCH slp_s0_residency fix

Pull PCI fix from Bjorn Helgaas:

 - Fix DesignWare PORT_LINK_CONTROL setup, which was corrupted when the
   DT "snps,enable-cdm-check" property was present (Yoshihiro Shimoda)

* tag 'pci-v6.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI: dwc: Fix PORT_LINK_CONTROL update when CDM check enabled

Merge tag 'regulator-fix-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Deferred probe fix for v6.3.

  This fixes a rarely triggered issue where we would treat probe
  deferral for clocks as a fatal error in the fixed regulator, causing
  it to fail to retry when it should"

* tag 'regulator-fix-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: Handle deferred clk

Pull block fixes from Jens Axboe:

 - NVMe pull request via Christoph:
     - Mark Lexar NM760 as IGNORE_DEV_SUBNQN (Juraj Pecigos)
     - Fix a possible UAF when failing to allocate an TCP io queue (Sagi
       Grimberg)

 - MD pull request via Song:
     - Fix a null pointer deference in 6.3-rc (Yu Kuai)

 - uevent partition fix (Alyssa)

* tag 'block-6.3-2023-03-30' of git://git.kernel.dk/linux:
  nvme-tcp: fix a possible UAF when failing to allocate an io queue
  md: fix regression for null-ptr-deference in __md_stop()
  nvme-pci: mark Lexar NM760 as IGNORE_DEV_SUBNQN
  loop: LOOP_CONFIGURE: send uevents for partitions

Pull io_uring fixes from Jens Axboe:

 - Fix a regression with the poll retry, introduced in this merge window
   (me)

 - Fix a regression with the alloc cache not decrementing the member
   count on removal. Also a regression from this merge window (Pavel)

 - Fix race around rsrc node grabbing (Pavel)

* tag 'io_uring-6.3-2023-03-30' of git://git.kernel.dk/linux:
  io_uring: fix poll/netmsg alloc caches
  io_uring/rsrc: fix rogue rsrc node grabbing
  io_uring/poll: clear single/double poll flags on poll arming

Commit 5829f8a8 ("platform/x86: ideapad-laptop: Send
KEY_TOUCHPAD_TOGGLE on some models") made ideapad-laptop send
KEY_TOUCHPAD_TOGGLE when we receive an ACPI notify with VPC event bit 5 set
and the touchpad-state has not been changed by the EC itself already.

This was done under the assumption that this would be good to do to make
the touchpad-toggle hotkey work on newer models where the EC does not
toggle the touchpad on/off itself (because it is not routed through
the PS/2 controller, but uses I2C).

But it turns out that at least some models, e.g. the Yoga 7-15ITL5 the EC
triggers an ACPI notify with VPC event bit 5 set on resume, which would
now cause a spurious KEY_TOUCHPAD_TOGGLE on resume to which the desktop
environment responds by disabling the touchpad in software, breaking
the touchpad (until manually re-enabled) on resume.

It was never confirmed that sending KEY_TOUCHPAD_TOGGLE actually improves
things on new models and at least some new models like the Yoga 7-15ITL5
don't have a touchpad on/off toggle hotkey at all, while still sending
ACPI notify events with VPC event bit 5 set.

So it seems best to revert the change to send KEY_TOUCHPAD_TOGGLE when
receiving an ACPI notify events with VPC event bit 5 and the touchpad
state as reported by the EC has not changed.

Note this is not a full revert the code to cache the last EC touchpad
state is kept to avoid sending spurious KEY_TOUCHPAD_ON / _OFF events
on resume.

Fixes: 5829f8a8 ("platform/x86: ideapad-laptop: Send KEY_TOUCHPAD_TOGGLE on some models")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217234
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230330194644.64628-1-hdegoede@redhat.com

Make quirk_asus_tablet_mode apply on other ROG Flow X13 devices,
which only affects the GV301Q model before.
Signed-off-by: weiliang1503 <weiliang1503@gmail.com>
Link: https://lore.kernel.org/r/20230330114943.15057-1-weiliang1503@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add "X570S AORUS ELITE" to known working boards
Reported-by: Brandon Nielsen <nielsenb@jetfuse.net>
Link: https://lore.kernel.org/r/20230331014902.7864-1-nielsenb@jetfuse.netSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Pull thermal control fixes from Rafael Wysocki:
 "These remove two recently added excessive lockdep assertions from the
  sysfs-related thermal code and fix two issues in Intel thermal
  drivers.

  Specifics:

   - Drop two lockdep assertions producing false positive warnings from
     the sysfs-related thermal core code (Rafael Wysocki)

   - Fix handling of two recently added module parameters in the Intel
     powerclamp thermal driver (David Arcari)

   - Fix one more deadlock in the int340x thermal driver (Srinivas
     Pandruvada)"

* tag 'thermal-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: powerclamp: Fix cpumask and max_idle module parameters
  thermal: intel: int340x: processor_thermal: Fix additional deadlock
  thermal: core: Drop excessive lockdep_assert_held() calls

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent regression related to the handling of ACPI notifications
  that made it more likely for ACPI driver callbacks to be invoked in an
  unexpected order and NULL pointers can be dereferenced as a result or
  similar.

  The fix is to modify the global ACPI notification handler so it does
  not invoke driver callbacks at all and allow the device-level
  notification handlers to receive "system" notifications (for the
  drivers that want to receive them)"

* tag 'acpi-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: Rework system-level device notification handling

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix for FPU probing in XIP kernels

 - Always enable the alternative framework for non-XIP kernels

* tag 'riscv-for-linus-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
  RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix to avoid crash on BCM6358 platforms"

* tag 'mips-fixes_6.3_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: bmips: BCM6358: disable RAC flush for TP1

Merge Intel thermal driver fixes for 6.3-rc5:

 - Fix handling of two recently added module parameters in the Intel
   powerclamp thermal driver (David Arcari).

 - Fix one more deadlock in the int340x thermal driver (Srinivas
   Pandruvada).

* thermal-intel-fixes:
  thermal: intel: powerclamp: Fix cpumask and max_idle module parameters
  thermal: intel: int340x: processor_thermal: Fix additional deadlock