We now keep a single list of IDs that includes both the _HID and any
_CIDs.  We no longer need to keep track of whether the device has a _CID.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

There's no need to treat _HID and _CID differently.  Keeping them in
a single list makes code that uses the IDs a little simpler because it
can just traverse the list rather than checking "do we have a HID?",
"do we have any CIDs?"
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This makes sure every acpi_device has at least one ID.  If we build an
acpi_device for a namespace node with no _HID or _CID, we sometimes
synthesize an ID like "LNXCPU" or "LNXVIDEO".  If we don't even have
that, give it a default "device" ID.

Note that this means things like:
    /sys/devices/LNXSYSTM:00/LNXSYBUS:00/HWP0001:00/HWP0002:04/device:00
(a PCI slot SxFy device) will have "hid" and "modprobe" entries, where
they didn't before.  These aren't very useful (a HID of "device" doesn't
tell you what *kind* of device it is, so it doesn't help find a driver),
but I don't think they're harmful.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Use acpi_device_hid() rather than accessing acpi_device.pnp.hardware_id
directly.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This makes \_SB_ show up as /sys/devices/LNXSYSTM:00/LNXSYBUS:00
rather than "device:00".  This has been broken for a loooong time
(at least since 2.6.13) because device->parent is an acpi_device
pointer, not a handle.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_bus_scan() traverses the namespace to enumerate devices and uses
acpi_add_single_object() to create acpi_devices.  When the platform
notifies us of a hot-plug event, we need to traverse part of the namespace
again to figure out what appeared or disappeared.  (We don't yet call
acpi_bus_scan() during hot-plug, but I plan to do that in the future.)

This patch makes acpi_add_single_object() notice when we already have
an acpi_device, so we don't need to make a new one.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch adds acpi_bus_type_and_status(), which determines the type
of the object and whether we want to build an acpi_device for it.  If
it is acpi_device-worthy, it returns the type and the device's current
status.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Add acpi_bus_get_status_handle() so we can get the status of a namespace
object before building a struct acpi_device.

This removes a use of "device->flags.dynamic_status", a cached indicator of
whether _STA exists.  It seems simpler and more reliable to just evaluate
_STA and catch AE_NOT_FOUND errors.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_bus_scan() currently walks the namespace manually.  This patch changes
it to use acpi_walk_namespace() instead.

Besides removing some complicated code, this means we take advantage of the
namespace locking done by acpi_walk_namespace().  The locking isn't so
important at boot-time, but I hope to eventually use this same path to
handle hot-addition of devices, when it will be important.

Note that acpi_walk_namespace() does not actually visit the starting node
first, so we need to do that by hand first.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

We can identify the root of the ACPI device tree by the fact that it
has no parent.  This is simpler than passing around ACPI_BUS_TYPE_SYSTEM
and will help remove special treatment of the device tree root.

Currently, we add the root by hand with ACPI_BUS_TYPE_SYSTEM.  If we
traverse the tree treating the root as just another device and use
acpi_get_type(), the root shows up as ACPI_TYPE_DEVICE.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch changes the order so we enumerate in the "root, namespace,
functional fixed" order instead of the "root, functional fixed, namespace"
order.  When I change acpi_bus_scan() to use acpi_walk_namespace(), it
will use the former order, so this patch isolates the order change for
bisectability.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch changes acpi_bus_scan() to take an acpi_handle rather than an
acpi_device pointer.  I plan to use acpi_bus_scan() in the hotplug path,
and I'd rather not assume that notifications only go to nodes that already
have acpi_devices.

This will also help remove the special case for adding the root node.  We
currently add the root by hand before acpi_bus_scan(), but using a handle
here means we can start the acpi_bus_scan() directly with the root even
though it doesn't have an acpi_device yet.

Note that acpi_bus_scan() currently adds and/or starts the *children* of
its device argument.  It doesn't do anything with the device itself.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

This patch adds acpi_bus_get_parent(), which ascends the namespace until
it finds a parent with an acpi_device.

Then we use acpi_bus_get_parent() in acpi_add_single_object(), so callers
don't have to figure out or keep track of the parent acpi_device.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

acpi_add_single_object() is static, and all callers supply a valid "child"
argument, so we don't need to check it.  This patch also remove some
unnecessary initializations.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

We now save the ACPI bus "device_type" in the acpi_device structure, so
we don't need to pass it around explicitly anymore.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

We only pass the "type" to acpi_device_set_context() so we know whether
the device has a handle to which we can attach the acpi_device pointer.
But it's safer to just check for the handle directly, since it's in the
acpi_device already.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Check the acpi_device device_type rather than the HID.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Most uses of the ACPI bus device_type (ACPI_BUS_TYPE_DEVICE,
ACPI_BUS_TYPE_POWER, etc) are during device initialization, but
we do need it later for notify handler installation, since that
is different for fixed hardware devices vs. namespace devices.

This patch saves the device_type in the acpi_device structure,
so we can check that rather than comparing against the _HID string.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

In several cases, functions take handle and parent device pointers in
addition to acpi_device pointers.  But the acpi_device structure contains
both the handle and the parent pointer, so it's pointless and error-prone
to pass them all.  This patch removes the unnecessary "handle" and "parent"
arguments.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

We never use the "root" argument, so just remove it.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Add debug output for adding an ACPI device.  Enable this with
"acpi.debug_layer=0x00010000" (ACPI_BUS_COMPONENT).
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Commit 15b8dd53 changed info->hardware_id from a static array to
a pointer.  If hardware_id is non-NULL, it points to a NULL-terminated
string, so we don't need to terminate it explicitly.  However, it may
be NULL; in that case, we *can't* add a NULL terminator.

This causes a NULL pointer dereference oops for devices without _HID.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: Lin Ming <ming.m.lin@intel.com>
CC: Bob Moore <robert.moore@intel.com>
CC: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Len Brown <len.brown@intel.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh_mobile_ceu_camera: fix compile breakage, caused by a bad merge
  sh: Add support DMA Engine to SH7780
  sh: Add support DMA Engine to SH7722
  sh: enable onenand support in kfr2r09 defconfig.
  sh: update defconfigs.
  sh: add FSI driver support for ms7724se
  sh: Fix up uninitialized variable use caught by gcc 4.4.
  sh: Handle unaligned 16-bit instructions on SH-2A.
  sh: mach-ecovec24: Add active low setting for sh_eth
  sh: includecheck fix: dwarf.c

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] Add support for the Avionic Design Xanthos watchdog timer.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
  genetlink: fix netns vs. netlink table locking (2)
  3c59x: Get rid of "Trying to free already-free IRQ"
  tunnel: eliminate recursion field
  ems_pci: fix size of CAN controllers BAR mapping for CPC-PCI v2
  net: fix htmldocs sunrpc, clnt.c
  Phonet: error on broadcast sending (unimplemented)
  Phonet: fix race for port number in concurrent bind()
  pktgen: better scheduler friendliness
  pktgen: T_TERMINATE flag is unused
  ipv4: check optlen for IP_MULTICAST_IF option
  ath9k: Initialize txgain and rxgain for newer AR9287 chipsets.
  iwlagn: fix panic in iwl{5000,4965}_rx_reply_tx
  ath9k: Fix RFKILL bugs
  drivers/net/wireless: Use usb_endpoint_dir_out
  cfg80211: don't overwrite privacy setting
  wl12xx: fix kconfig/link errors
  rt2x00: fix the definition of rt2x00crypto_rx_insert_iv
  iwlwifi: reduce noise when skb allocation fails
  iwlwifi: do not send sync command while holding spinlock
  mac80211: fix DTIM setting
  ...

This patch adds support for the watchdog timer on Avionic Design Xanthos
boards.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: Cleanup linker script using new linker script macros.
  m32r: Move the spi_stack_top and spu_stack_top into .init.data section.
  m32r: Remove unused .altinstructions and .exit.* code from linker script.
  m32r: Move GET_THREAD_INFO definition out of asm/thread_info.h.
  m32r: Define THREAD_SIZE only once.
  m32r: make PAGE_SIZE available to assembly.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  Fix build of cpm_uart due to core changes
  powerpc/8xx: Fix regression introduced by cache coherency rewrite
  powerpc/4xx: Fix erroneous xmon warning on PowerPC 4xx
  powerpc/mm: Fix 40x and 8xx vs. _PAGE_SPECIAL
  powerpc: Cleanup linker script using new linker script macros.
  powerpc: Fix ibm,client-architecture-support printout
  powerpc: Increase NODES_SHIFT on 64bit from 4 to 8
  powerpc/perf_counter: Fix vdso detection
  powerpc: Move 64bit heap above 1TB on machines with 1TB segments
  powerpc: Change archdata dma_data to a union
  powerpc: Rename get_dma_direct_offset get_dma_offset
  powerpc/mm: Remove duplicated #include
  powerpc/book3e-64: Remove duplicated #include
  powerpc: Check for unsupported relocs when using CONFIG_RELOCATABLE
  powerpc/pmc: Don't access lppaca on Book3E
  powerpc: kmalloc failure ignored in vio_build_iommu_table()
  hvc_console: Provide (un)locked version for hvc_resize()

Ignore the address parameter given to NOMMU mmap() as it is a hint, rather
than giving an error if it's non-zero.  MAP_FIXED still gets an error.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The NOMMU fallback for is_vmalloc_or_module_addr() should be static inline,
not just static, in linux/mm.h.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix MAP_PRIVATE mmap() of files and devices where the data in the backing store
might be mapped directly.  Use the BDI_CAP_MAP_DIRECT capability flag to govern
whether or not we should be trying to map a file directly.  This can be used to
determine whether or not a region has been filled in at the point where we call
do_mmap_shared() or do_mmap_private().

The BDI_CAP_MAP_DIRECT capability flag is cleared by validate_mmap_request() if
there's any reason we can't use it.  It's also cleared in do_mmap_pgoff() if
f_op->get_unmapped_area() fails.

Without this fix, attempting to run a program from a RomFS image on a
non-mappable MTD partition results in a BUG as the kernel attempts XIP, and
this can be caught in gdb:

Program received signal SIGABRT, Aborted.
0xc005dce8 in add_nommu_region (region=<value optimized out>) at mm/nommu.c:547
(gdb) bt
#0  0xc005dce8 in add_nommu_region (region=<value optimized out>) at mm/nommu.c:547
#1  0xc005f168 in do_mmap_pgoff (file=0xc31a6620, addr=<value optimized out>, len=3808, prot=3, flags=6146, pgoff=0) at mm/nommu.c:1373
#2  0xc00a96b8 in elf_fdpic_map_file (params=0xc33fbbec, file=0xc31a6620, mm=0xc31bef60, what=0xc0213144 "executable") at mm.h:1145
#3  0xc00aa8b4 in load_elf_fdpic_binary (bprm=0xc316cb00, regs=<value optimized out>) at fs/binfmt_elf_fdpic.c:343
#4  0xc006b588 in search_binary_handler (bprm=0x6, regs=0xc33fbce0) at fs/exec.c:1234
#5  0xc006c648 in do_execve (filename=<value optimized out>, argv=0xc3ad14cc, envp=0xc3ad1460, regs=0xc33fbce0) at fs/exec.c:1356
#6  0xc0008cf0 in sys_execve (name=<value optimized out>, argv=0xc3ad14cc, envp=0xc3ad1460) at arch/frv/kernel/process.c:263
#7  0xc00075dc in __syscall_call () at arch/frv/kernel/entry.S:897

Note that this fix does the following commit differently:

	commit a190887b
	Author: David Howells <dhowells@redhat.com>
	Date:   Sat Sep 5 11:17:07 2009 -0700
	nommu: fix error handling in do_mmap_pgoff()
Reported-by: Graff Yang <graff.yang@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Flash mappings for the MB93090-MB00 evaluation motherboard.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Note that .data.page_aligned and .data.cacheline_aligned are now after
_data; it was probably a bug that they were before it.

Also, some explicit ALIGN(8)'s between various initcall sections were
removed; this should be harmless as the implicit alignment of
initcall_t was already 8.
Signed-off-by: Geoffrey Thomas <geofft@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>