Prep work for persistent alloc information. Refactoring also lets us
make free_inc much smaller, which means a lot fewer buckets stranded on
freelists.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

journal_buf_switch is called from the foreground when getting a journal
reservation and thus is somewhat latency sensitive;
bch2_bucket_seq_cleanup has to run infrequently but is a bit expensive
when it does run.

Call it from the journal write path instead, and punt the journal write
to worqueue context.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This is prep work for using deferred btree updates for inode updates -
the way inodes are done now we're relying on btree locking for ei_inode
and ei_update_lock could probably be removed, but it'll actually be
needed when we switch to deferred updates.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Also make inode flags consistent with how the rest of the inode is
updated
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

ei_update_lock isn't currently needed for write inode (but it will be
needed again when deferred btree updates are used for inode updates)
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

exceptionally crappy "tracing", but it's a start at documenting the
places restarts can be triggered
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now that all filesystem operatinos that manipulate the filesystem
heirachy and i_nlink are fully atomic, we can add a feature bit to
indicate i_nlink doesn't need to be checked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Initially forked from drivers/md/bcache, bcachefs is a new copy-on-write
filesystem with every feature you could possibly want.

Website: https://bcachefs.orgSigned-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs is a new copy-on-write filesystem; add a MAINTAINERS entry for
it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This patch adds genradix_peek_prev(), genradix_iter_rewind(), and
genradix_for_each_reverse(), for iterating backwards over a generic
radix tree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When we started spreading new inode numbers throughout most of the 64
bit inode space, that triggered some corner case bugs, in particular
some integer overflows related to the radix tree code. Oops.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>

lib/generic-radix-tree.c is a simple radix tree that supports storing
arbitrary types. Add a maintainers entry for it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Fixes building in userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Factor out a new helper, which returns the number of events outstanding.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Like wait_event() - except, because it uses closures and closure
waitlists it doesn't have the restriction on modifying task state inside
the condition check, like wait_event() does.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Coly Li <colyli@suse.de>

closures, from bcache, are async widgets with a variety of uses.
bcachefs also uses them, so they're being moved to lib/; mark them as
maintained.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Prep work for bcachefs - being a fork of bcache it also uses closures
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>

The bcachefs implementation of six locks is intended to land in
generic locking code in the long term, but has been pulled into the
bcachefs subsystem for internal use for the time being. This code
lift breaks the bcachefs module build as six locks depend a couple
of the generic locking tracepoints. Export these tracepoint symbols
for bcachefs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

errname() returns the name of an errcode; this functionality is
otherwise only available for error pointers via %pE - bcachefs uses this
for better error messages.
Signed-off-by: Christopher James Halse Rogers <raof@ubuntu.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

printbuf now needs to know the number of characters that would have been
written if the buffer was too small, like snprintf(); this changes
string_get_size() to return the the return value of snprintf().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The bcachefs module wants it, and there doesn't seem to be any
reason it shouldn't be exported like the other functions.
Signed-off-by: Christopher James Halse Rogers <raof@ubuntu.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

New helper for bcachefs - bcachefs doesn't want the
inode_dec_link_count() call that d_tmpfile does, it handles i_nlink on
its own atomically with other btree updates
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>

There has been a long standing page cache coherence bug with direct IO.
This provides part of a mechanism to fix it, currently just used by
bcachefs but potentially worth promoting to the VFS.

Direct IO evicts the range of the pagecache being read or written to.

For reads, we need dirty pages to be written to disk, so that the read
doesn't return stale data. For writes, we need to evict that range of
the pagecache so that it's not stale after the write completes.

However, without a locking mechanism to prevent those pages from being
re-added to the pagecache - by a buffered read or page fault - page
cache inconsistency is still possible.

This isn't necessarily just an issue for userspace when they're playing
games; filesystems may hang arbitrary state off the pagecache, and so
page cache inconsistency may cause real filesystem bugs, depending on
the filesystem. This is less of an issue for iomap based filesystems,
but e.g. buffer heads caches disk block mappings (!) and attaches them
to the pagecache, and bcachefs attaches disk reservations to pagecache
pages.

This issue has been hard to fix, because
 - we need to add a lock (henceforth called pagecache_add_lock), which
   would be held for the duration of the direct IO
 - page faults add pages to the page cache, thus need to take the same
   lock
 - dio -> gup -> page fault thus can deadlock

And we cannot enforce a lock ordering with this lock, since userspace
will be controlling the lock ordering (via the fd and buffer arguments
to direct IOs), so we need a different method of deadlock avoidance.

We need to tell the page fault handler that we're already holding a
pagecache_add_lock, and since plumbing it through the entire gup() path
would be highly impractical this adds a field to task_struct.

Then the full method is:
 - in the dio path, when we first take the pagecache_add_lock, note the
   mapping in the current task_struct
 - in the page fault handler, if faults_disabled_mapping is set, we
   check if it's the same mapping as the one we're taking a page fault
   for, and if so return an error.

   Then we check lock ordering: if there's a lock ordering violation and
   trylock fails, we'll have to cycle the locks and return an error that
   tells the DIO path to retry: faults_disabled_mapping is also used for
   signalling "locks were dropped, please retry".

Also relevant to this patch: mapping->invalidate_lock.
mapping->invalidate_lock provides most of the required semantics - it's
used by truncate/fallocate to block pages being added to the pagecache.
However, since it's a rwsem, direct IOs would need to take the write
side in order to block page cache adds, and would then be exclusive with
each other - we'll need a new type of lock to pair with this approach.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Jan Kara <jack@suse.cz>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Andreas Grünbacher <andreas.gruenbacher@gmail.com>

Pull drm ci scripts from Dave Airlie:
 "This is a bunch of ci integration for the freedesktop gitlab instance
  where we currently do upstream userspace testing on diverse sets of
  GPU hardware. From my perspective I think it's an experiment worth
  going with and seeing how the benefits/noise playout keeping these
  files useful.

  Ideally I'd like to get this so we can do pre-merge testing on PRs
  eventually.

  Below is some info from danvet on why we've ended up making the
  decision and how we can roll it back if we decide it was a bad plan.

  Why in upstream?

   - like documentation, testcases, tools CI integration is one of these
     things where you can waste endless amounts of time if you
     accidentally have a version that doesn't match your source code

   - but also like the above, there's a balance, this is the initial cut
     of what we think makes sense to keep in sync vs out-of-tree,
     probably needs adjustment

   - gitlab supports out-of-repo gitlab integration and that's what's
     been used for the kernel in drm, but it results in per-driver
     fragmentation and lots of duplicated effort. the simple act of
     smashing an arbitrary winner into a topic branch already started
     surfacing patches on dri-devel and sparking good cross driver team
     discussions

  Why gitlab?

   - it's not any more shit than any of the other CI

   - drm userspace uses it extensively for everything in userspace, we
     have a lot of people and experience with this, including
     integration of hw testing labs

   - media userspace like gstreamer is also on gitlab.fd.o, and there's
     discussion to extend this to the media subsystem in some fashion

  Can this be shared?

   - there's definitely a pile of code that could move to scripts/ if
     other subsystem adopt ci integration in upstream kernel git. other
     bits are more drm/gpu specific like the igt-gpu-tests/tools
     integration

   - docker images can be run locally or in other CI runners

  Will we regret this?

   - it's all in one directory, intentionally, for easy deletion

   - probably 1-2 years in upstream to see whether this is worth it or a
     Big Mistake. that's roughly what it took to _really_ roll out solid
     CI in the bigger userspace projects we have on gitlab.fd.o like
     mesa3d"

* tag 'topic/drm-ci-2023-08-31-1' of git://anongit.freedesktop.org/drm/drm:
  drm: ci: docs: fix build warning - add missing escape
  drm: Add initial ci/ subdirectory

Pull x86 fixes from Ingo Molnar:
 "Fix preemption delays in the SGX code, remove unnecessarily
  UAPI-exported code, fix a ld.lld linker (in)compatibility quirk and
  make the x86 SMP init code a bit more conservative to fix kexec()
  lockups"

* tag 'x86-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Break up long non-preemptible delays in sgx_vepc_release()
  x86: Remove the arch_calc_vm_prot_bits() macro from the UAPI
  x86/build: Fix linker fill bytes quirk/incompatibility for ld.lld
  x86/smp: Don't send INIT to non-present and non-booted CPUs

Pull x86 perf event fix from Ingo Molnar:
 "Work around a firmware bug in the uncore PMU driver, affecting certain
  Intel systems"

* tag 'perf-urgent-2023-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Correct the number of CHAs on EMR

Merge tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Arnaldo Carvalho de Melo:
 "perf tools maintainership:

   - Add git information for perf-tools and perf-tools-next trees and
     branches to the MAINTAINERS file. That is where development now
     takes place and myself and Namhyung Kim have write access, more
     people to come as we emulate other maintainer groups.

  perf record:

   - Record kernel data maps when 'perf record --data' is used, so that
     global variables can be resolved and used in tools that do data
     profiling.

  perf trace:

   - Remove the old, experimental support for BPF events in which a .c
     file was passed as an event: "perf trace -e hello.c" to then get
     compiled and loaded.

     The only known usage for that, that shipped with the kernel as an
     example for such events, augmented the raw_syscalls tracepoints and
     was converted to a libbpf skeleton, reusing all the user space
     components and the BPF code connected to the syscalls.

     In the end just the way to glue the BPF part and the user space
     type beautifiers changed, now being performed by libbpf skeletons.

     The next step is to use BTF to do pretty printing of all syscall
     types, as discussed with Alan Maguire and others.

     Now, on a perf built with BUILD_BPF_SKEL=1 we get most if not all
     path/filenames/strings, some of the networking data structures,
     perf_event_attr, etc, i.e. systemwide tracing of nanosleep calls
     and perf_event_open syscalls while 'perf stat' runs 'sleep' for 5
     seconds:

      # perf trace -a -e *nanosleep,perf* perf stat -e cycles,instructions sleep 5
         0.000 (   9.034 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0 (PERF_COUNT_HW_CPU_CYCLES), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
         9.039 (   0.006 ms): perf/327641 perf_event_open(attr_uptr: { type: 0 (PERF_TYPE_HARDWARE), size: 136, config: 0x1 (PERF_COUNT_HW_INSTRUCTIONS), sample_type: IDENTIFIER, read_format: TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING, disabled: 1, inherit: 1, enable_on_exec: 1, exclude_guest: 1 }, pid: 327642 (perf-exec), cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
             ? (           ): gpm/991  ... [continued]: clock_nanosleep())               = 0
        10.133 (           ): sleep/327642 clock_nanosleep(rqtp: { .tv_sec: 5, .tv_nsec: 0 }, rmtp: 0x7ffd36f83ed0) ...
             ? (           ): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
        30.276 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
       223.215 (1000.430 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
        30.276 (2000.394 ms): gpm/991  ... [continued]: clock_nanosleep())               = 0
      1230.814 (           ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
      1230.814 (1000.404 ms): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
      2030.886 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
      2237.709 (1000.153 ms): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) = 0
             ? (           ): crond/1172  ... [continued]: clock_nanosleep())            = 0
      3242.699 (           ): pool-gsd-smart/3051 clock_nanosleep(rqtp: { .tv_sec: 1, .tv_nsec: 0 }, rmtp: 0x7f6e7fffec90) ...
      2030.886 (2000.385 ms): gpm/991  ... [continued]: clock_nanosleep())               = 0
      3728.078 (           ): crond/1172 clock_nanosleep(rqtp: { .tv_sec: 60, .tv_nsec: 0 }, rmtp: 0x7ffe0971dcf0) ...
      3242.699 (1000.158 ms): pool-gsd-smart/3051  ... [continued]: clock_nanosleep())   = 0
      4031.409 (           ): gpm/991 clock_nanosleep(rqtp: { .tv_sec: 2, .tv_nsec: 0 }, rmtp: 0x7ffcc6f73710) ...
        10.133 (5000.375 ms): sleep/327642  ... [continued]: clock_nanosleep())          = 0

      Performance counter stats for 'sleep 5':

             2,617,347      cycles
             1,855,997      instructions                     #    0.71  insn per cycle

           5.002282128 seconds time elapsed

           0.000855000 seconds user
           0.000852000 seconds sys

  perf annotate:

   - Building with binutils' libopcode now is opt-in (BUILD_NONDISTRO=1)
     for licensing reasons, and we missed a build test on
     tools/perf/tests makefile.

     Since we now default to NDEBUG=1, we ended up segfaulting when
     building with BUILD_NONDISTRO=1 because a needed initialization
     routine was being "error checked" via an assert.

     Fix it by explicitly checking the result and aborting instead if it
     fails.

     We better back propagate the error, but at least 'perf annotate' on
     samples collected for a BPF program is back working when perf is
     built with BUILD_NONDISTRO=1.

  perf report/top:

   - Add back TUI hierarchy mode header, that is seen when using 'perf
     report/top --hierarchy'.

   - Fix the number of entries for 'e' key in the TUI that was
     preventing navigation of lines when expanding an entry.

  perf report/script:

   - Support cross platform register handling, allowing a perf.data file
     collected on one architecture to have registers sampled correctly
     displayed when analysis tools such as 'perf report' and 'perf
     script' are used on a different architecture.

   - Fix handling of event attributes in pipe mode, i.e. when one uses:

  	perf record -o - | perf report -i -

     When no perf.data files are used.

   - Handle files generated via pipe mode with a version of perf and
     then read also via pipe mode with a different version of perf,
     where the event attr record may have changed, use the record size
     field to properly support this version mismatch.

  perf probe:

   - Accessing global variables from uprobes isn't supported, make the
     error message state that instead of stating that some minimal
     kernel version is needed to have that feature. This seems just a
     tool limitation, the kernel probably has all that is needed.

  perf tests:

   - Fix a reference count related leak in the dlfilter v0 API where the
     result of a thread__find_symbol_fb() is not matched with an
     addr_location__exit() to drop the reference counts of the resolved
     components (machine, thread, map, symbol, etc). Add a dlfilter test
     to make sure that doesn't regresses.

   - Lots of fixes for the 'perf test' written in shell script related
     to problems found with the shellcheck utility.

   - Fixes for 'perf test' shell scripts testing features enabled when
     perf is built with BUILD_BPF_SKEL=1, such as 'perf stat' bpf
     counters.

   - Add perf record sample filtering test, things like the following
     example, that gets implemented as a BPF filter attached to the
     event:

       # perf record -e task-clock -c 10000 --filter 'ip < 0xffffffff00000000'

   - Improve the way the task_analyzer test checks if libtraceevent is
     linked, using 'perf version --build-options' instead of the more
     expensinve 'perf record -e "sched:sched_switch"'.

   - Add support for riscv in the mmap-basic test. (This went as well
     via the RiscV tree, same contents).

  libperf:

   - Implement riscv mmap support (This went as well via the RiscV tree,
     same contents).

  perf script:

   - New tool that converts perf.data files to the firefox profiler
     format so that one can use the visualizer at
     https://profiler.firefox.com/. Done by Anup Sharma as part of this
     year's Google Summer of Code.

     One can generate the output and upload it to the web interface but
     Anup also automated everything:

       perf script gecko -F 99 -a sleep 60

   - Support syscall name parsing on arm64.

   - Print "cgroup" field on the same line as "comm".

  perf bench:

   - Add new 'uprobe' benchmark to measure the overhead of uprobes
     with/without BPF programs attached to it.

   - breakpoints are not available on power9, skip that test.

  perf stat:

   - Add #num_cpus_online literal to be used in 'perf stat' metrics, and
     add this extra 'perf test' check that exemplifies its purpose:

  	TEST_ASSERT_VAL("#num_cpus_online",
                         expr__parse(&num_cpus_online, ctx, "#num_cpus_online") == 0);
  	TEST_ASSERT_VAL("#num_cpus", expr__parse(&num_cpus, ctx, "#num_cpus") == 0);
  	TEST_ASSERT_VAL("#num_cpus >= #num_cpus_online", num_cpus >= num_cpus_online);

  Miscellaneous:

   - Improve tool startup time by lazily reading PMU, JSON, sysfs data.

   - Improve error reporting in the parsing of events, passing YYLTYPE
     to error routines, so that the output can show were the parsing
     error was found.

   - Add 'perf test' entries to check the parsing of events
     improvements.

   - Fix various leak for things detected by -fsanitize=address, mostly
     things that would be freed at tool exit, including:

       - Free evsel->filter on the destructor.

       - Allow tools to register a thread->priv destructor and use it in
         'perf trace'.

       - Free evsel->priv in 'perf trace'.

       - Free string returned by synthesize_perf_probe_point() when the
         caller fails to do all it needs.

   - Adjust various compiler options to not consider errors some
     warnings when building with broken headers found in things like
     python, flex, bison, as we otherwise build with -Werror. Some for
     gcc, some for clang, some for some specific version of those, some
     for some specific version of flex or bison, or some specific
     combination of these components, bah.

   - Allow customization of clang options for BPF target, this helps
     building on gentoo where there are other oddities where BPF targets
     gets passed some compiler options intended for the native build, so
     building with WERROR=0 helps while these oddities are fixed.

   - Dont pass ERR_PTR() values to perf_session__delete() in 'perf top'
     and 'perf lock', fixing some segfaults when handling some odd
     failures.

   - Add LTO build option.

   - Fix format of unordered lists in the perf docs
     (tools/perf/Documentation)

   - Overhaul the bison files, using constructs such as YYNOMEM.

   - Remove unused tokens from the bison .y files.

   - Add more comments to various structs.

   - A few LoongArch enablement patches.

  Vendor events (JSON):

   - Add JSON metrics for Yitian 710 DDR (aarch64). Things like:

  	EventName, BriefDescription
  	visible_window_limit_reached_rd, "At least one entry in read queue reaches the visible window limit.",
  	visible_window_limit_reached_wr, "At least one entry in write queue reaches the visible window limit.",
  	op_is_dqsosc_mpc	       , "A DQS Oscillator MPC command to DRAM.",
  	op_is_dqsosc_mrr	       , "A DQS Oscillator MRR command to DRAM.",
  	op_is_tcr_mrr		       , "A Temperature Compensated Refresh(TCR) MRR command to DRAM.",

   - Add AmpereOne metrics (aarch64).

   - Update N2 and V2 metrics (aarch64) and events using Arm telemetry
     repo.

   - Update scale units and descriptions of common topdown metrics on
     aarch64. Things like:
       - "MetricExpr": "stall_slot_frontend / (#slots * cpu_cycles)",
       - "BriefDescription": "Frontend bound L1 topdown metric",
       + "MetricExpr": "100 * (stall_slot_frontend / (#slots * cpu_cycles))",
       + "BriefDescription": "This metric is the percentage of total slots that were stalled due to resource constraints in the frontend of the processor.",

   - Update events for intel: meteorlake to 1.04, sapphirerapids to
     1.15, Icelake+ metric constraints.

   - Update files for the power10 platform"

* tag 'perf-tools-for-v6.6-1-2023-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (217 commits)
  perf parse-events: Fix driver config term
  perf parse-events: Fixes relating to no_value terms
  perf parse-events: Fix propagation of term's no_value when cloning
  perf parse-events: Name the two term enums
  perf list: Don't print Unit for "default_core"
  perf vendor events intel: Fix modifier in tma_info_system_mem_parallel_reads for skylake
  perf dlfilter: Avoid leak in v0 API test use of resolve_address()
  perf metric: Add #num_cpus_online literal
  perf pmu: Remove str from perf_pmu_alias
  perf parse-events: Make common term list to strbuf helper
  perf parse-events: Minor help message improvements
  perf pmu: Avoid uninitialized use of alias->str
  perf jevents: Use "default_core" for events with no Unit
  perf test stat_bpf_counters_cgrp: Enhance perf stat cgroup BPF counter test
  perf test shell stat_bpf_counters: Fix test on Intel
  perf test shell record_bpf_filter: Skip 6.2 kernel
  libperf: Get rid of attr.id field
  perf tools: Convert to perf_record_header_attr_id()
  libperf: Add perf_record_header_attr_id()
  perf tools: Handle old data in PERF_RECORD_ATTR
  ...

Pull smb client fixes from Steve French:

 - six smb3 client fixes including ones to allow controlling smb3
   directory caching timeout and limits, and one debugging improvement

 - one fix for nls Kconfig (don't need to expose NLS_UCS2_UTILS option)

 - one minor spnego registry update

* tag '6.6-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  spnego: add missing OID to oid registry
  smb3: fix minor typo in SMB2_GLOBAL_CAP_LARGE_MTU
  cifs: update internal module version number for cifs.ko
  smb3: allow controlling maximum number of cached directories
  smb3: add trace point for queryfs (statfs)
  nls: Hide new NLS_UCS2_UTILS
  smb3: allow controlling length of time directory entries are cached with dir leases
  smb: propagate error code of extract_sharename()

Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators.  ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction.  ITER_DISCARD isn't dealt with
either as that can't be extracted.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add some kunit tests for page extraction for ITER_BVEC, ITER_KVEC and
ITER_XARRAY type iterators.  ITER_UBUF and ITER_IOVEC aren't dealt with
as they require userspace VM interaction.  ITER_DISCARD isn't dealt with
either as that does nothing.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>