It is possible to configure a kernel which has xmon enabled, but has no
udbg backend to provide IO. This can make xmon rather confusing, as it
produces no output, blocks for two seconds, and then returns.

As a last resort we can instead try to printk(), which may deadlock or
otherwise crash, but tries quite hard not to.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Currently xmon_depth_to_print is static and global, but it's only
ever used in xmon_show_stack().

At least with a modern compiler it's inlined, so there's no point
in it being static, we could #define it but it's only used in one
place.

By reworking the logic we can drop count and just decrement the
max value as a loop counter. Also switch to a while loop so we
actually print no more than 64 frames as you'd expect based on the
variable name.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We use STACK_FRAME_OVERHEAD in the exception vectors to establish
the exception frame, so it should be good enough to use here.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Neither REGS_PER_LINE or LAST_VOLATILE are used, nor have they ever
been as far back as I can see.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We have two #defines that rename scanhex() and skipbl() to
xmon_scanhex() and xmon_skipbl() - but no one ever uses those
names.

So the only effect is to rename the actual symbols in the generated
code, and AFACIS there is no reason to do that, so drop them.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The routines in start.c are only ever called from nonstdio.c, so if we
move them in there they can become static which is nice.

I suspect the idea behind the separation was that start.c could be
replaced in order to build xmon in userland. If anyone still cares about
doing that we could handle that with an ifdef or two.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

xmon_getchar() is only called from within nonstdio.c, so make it static.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This has been empty since 2005, commit 51d3082f "Unify udbg (#2)".
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

It looks like xmon_expect() was used for doing xmon over a modem (!?),
that code was dropped in 2005 in commit 51d3082f "Unify udbg (#2)".

Once xmon_expect() is gone xmon_read_poll() is unused, drop it too.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The last user of udbg_read() was removed in 2005, in commit fca5dcd4
"Simplify and clean up the xmon terminal I/O".

Given we haven't needed it for 7 years we can probably drop it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Since the "Disintegrate asm/system.h for PowerPC"
(ae3a197e) This has been failing when
DEBUG is #defined.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Don't use 47x only #defines for TLBIVAX or ICBT, supply and use helpers
in ppc-opcode.h

This fixes a compile breakage.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Fixes this following:

$ make distclean; make corenet32_smp_defconfig; make p4080ds.dtb
  CLEAN   arch/powerpc/boot
  CLEAN   scripts/basic
  CLEAN   scripts/dtc
  CLEAN   scripts/genksyms
  CLEAN   scripts/kconfig
  CLEAN   scripts/mod
  CLEAN   scripts
  CLEAN   include/config include/generated
  CLEAN   .config
  HOSTCC  scripts/basic/fixdep
  HOSTCC  scripts/kconfig/conf.o
  SHIPPED scripts/kconfig/zconf.tab.c
  SHIPPED scripts/kconfig/zconf.lex.c
  SHIPPED scripts/kconfig/zconf.hash.c
  HOSTCC  scripts/kconfig/zconf.tab.o
  HOSTLD  scripts/kconfig/conf
scripts/kconfig/conf --silentoldconfig Kconfig
  DTC     arch/powerpc/boot/p4080ds.dtb
/bin/sh: /local/home/mattsm/git/linux/scripts/dtc/dtc: No such file or directory
make[1]: *** [arch/powerpc/boot/p4080ds.dtb] Error 1
make: *** [p4080ds.dtb] Error 2
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Anticipating growth in coming years, we should ensure we are getting a
good lead on testing.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

I'm reviving an old patch from 2009 that adds support for GXT4000P and GXT6500P
adapter to the gxt4500 driver.

See threads at http://marc.info/?l=linux-fbdev-devel&m=124345080216952&w=2
and https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-June/072672.html
for more details.

This patch adds support for GXT4000P and GXT6500P cards found on some
IBM pSeries machines.
GXT4000P/6000P and GXT4500P/6500P  couples are  identical from
software's point of view and are based on the same  Raster Engine
(RC1000), except for a different reference clock for the PLL.
GXT6x00P models are equipped with an additional Geometry Engine
(GT1000) but this driver doesn't use it.
Signed-off-by: Nico Macrionitis <acrux@cruxppc.org>
Signed-off-by: Giuseppe Coviello <cjg@cruxppc.org>
Tested-by: Dan Horák <dan@danny.cz>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Earlier without cpuidle framework on pseries, the native arch
idle routine comprised of both snooze and nap
states.  smt_snooze_delay variable was used to delay
the idle process entry to deeper idle state like  nap.
With the coming of cpuidle, this arch specific idle was replaced
by two different idle routines, one for supporting snooze and other
for nap. This enabled addition of more
low level idle states on pseries in the future.

On adopting the generic cpuidle framework for POWER systems,
the decision of which idle state to choose from,  given a predicted
idle time is taken by the menu governor based on
target_residency and  exit_latency of the idle states.
target_residency is the minimum time to be resident in that idle state.
Exit_latency is time taken to exit out of idle state.
Deeper the idle state, both the target residency and exit latency
would be higher.

In the current design, smt_snooze_delay is used as target_residency
for the  snooze state which is incorrect, as it is not the
minimum but the maximum duration to be in snooze state.
This would  result in the governor in taking bad decision,
as presently target_residency of nap < target_residency of snooze
inspite of nap being deeper idle state.

This patch aims to fix this problem by replacing the smt_snooze_delay loop
in snooze state, with the need_resched()  as the governor is aware of
entry and exit of various idle transitions based on which
next idle time prediction.

The governor is intelligent enough to determine the idle state the needs to
be transitioned to and maintains a whole of heuristics including
io load, previous idle states predictions etc for the same, based on
which idle state entry decision is taken.

With this fix, of setting target_residency of snooze to 0
					     nap to smt_snooze_delay
if the predicted idle time is less
than smt_snooze_delay (target_residency of nap)
value governor would pick snooze state, else nap. This adhers to the
previous native idle design.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

smt_snooze_delay was designed to  delay idle loop's nap entry
in the native idle code before it got  ported over to use as part of
the cpuidle framework.

A -ve value  assigned to smt_snooze_delay should result in
busy looping, in other words disabling the entry to nap state.

	- https://lists.ozlabs.org/pipermail/linuxppc-dev/2010-May/082450.html

This particular functionality can be achieved currently by
echo 1 > /sys/devices/system/cpu/cpu*/state1/disable
but it is broken when one assigns -ve value to  the smt_snooze_delay
variable either via sysfs entry or ppc64_cpu util.

This patch aims to fix this, by disabling nap state when smt_snooze_delay
variable is set to -ve value.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Remove the redundant target residency initialisation in pseries_cpuidle_driver_init().
This is currently over-writing the residency time updated as part of the static
table, resulting in  all the idle states having the same target
residency of 100us which is incorrect. This may result in the menu governor making
wrong state decisions.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Fix build failure for powerpc KVM by adding missing VPN_SHIFT definition
and the ';'

arch/powerpc/kvm/book3s_32_mmu_host.c: In function 'kvmppc_mmu_map_page':
arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: 'VPN_SHIFT' undeclared (first use in this function)
arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: (Each undeclared identifier is reported only once
arch/powerpc/kvm/book3s_32_mmu_host.c:176: error: for each function it appears in.)
arch/powerpc/kvm/book3s_32_mmu_host.c:178: error: expected ';' before 'next_pteg'
arch/powerpc/kvm/book3s_32_mmu_host.c:190: error: label 'next_pteg' used but not defined
make[1]: *** [arch/powerpc/kvm/book3s_32_mmu_host.o] Error 1
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This reverts commit 81331211.

This revert was requested by the author of the patch as it seems
to cause system hangs with some low frequency events

Pull networking fixes from David Miller:

 1) Fix regression in /proc/net/if_inet6, sometimes devices do not get
    listed.  From Eric Dumazet.

 2) Add IPSEC networking sub-section to MAINTAINERS.

 3) S390 networking fixes from Hendrik Brueckner and Stefan Raspl.

 4) Fix enslavement of devices that can't do VLAN properly, from Jiri
    Pirko.

 5) SCTP sack handling fix from Zijie Pan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv6: addrconf: fix /proc/net/if_inet6
  bnx2x: fix handling mf storage modes
  qeth: fix deadlock between recovery and bonding driver
  smsgiucv: reestablish IUCV path after resume
  sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter()
  vlan: fix bond/team enslave of vlan challenged slave/port
  MAINTAINERS: Add explicit section for IPSEC networking.

Pull sparc fixes from David Miller:
 "Two sparc64 perf bug fixes and add a sysrq facility so I can diagnose
  these kinds of problems more quickly in the future."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix bit twiddling in sparc_pmu_enable_event().
  sparc64: Add global PMU register dumping via sysrq.
  sparc64: Like x86 we should check current->mm during perf backtrace generation.

Pull SuperH updates from Paul Mundt.

The bulk of this is the UAPI disintegration for SH.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh: Fix up more fallout from pointless ARM __iomem churn.
  sh: Wire up kcmp syscall.
  UAPI: (Scripted) Disintegrate arch/sh/include/asm

Merge emailed FRV fixes from David Howells.

* frv:
  FRV: Fix linux/elf-fdpic.h
  FRV: Fix const sections change
  FRV: Fix incorrect symbol in copy_thread()
  FRV: Fix VLIW packing constraint violation in entry.S

It seems I accidentally switched the guard on linux/elf-fdpic.h from #ifdef
__KERNEL__ to #ifndef __KERNEL__ when attempting to expand the guarded region
to cover the elf_fdpic_params struct when doing the UAPI split - with the
result that the struct became unavailable to kernel code.

Move incorrectly guarded bits back to the kernelspace header.

Whilst we're at it, the __KERNEL__ guards can be deleted as they're no longer
necessary.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Fengguang Wu <fengguang.wu@intel.com>
cc: Lars-Peter Clausen <lars@metafoo.de>
cc: uclinux-dev@uclinux.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add __pminitconst to fix the build, otherwise the following error can occur:

  arch/frv/kernel/setup.c:187:47: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token
  arch/frv/kernel/setup.c:386:2: error: 'clock_cmodes' undeclared (first use in this function)
  arch/frv/kernel/setup.c:571:6: error: 'clock_cmodes' undeclared (first use in this function)
  make[2]: *** [arch/frv/kernel/setup.o] Error 1

http://kisskb.ellerman.id.au/kisskb/buildresult/7344691/Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix an incorrect symbol in copy_thread():

  arch/frv/kernel/process.c: In function 'copy_thread':
  arch/frv/kernel/process.c:197: error: 'chilregs' undeclared (first use in this function)
  arch/frv/kernel/process.c:197: error: (Each undeclared identifier is reported only once
  arch/frv/kernel/process.c:197: error: for each function it appears in.)
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix VLIW packing constraint violation in entry.S:

  arch/frv/kernel/entry.S: Assembler messages:
  arch/frv/kernel/entry.S:871: Error: VLIW packing constraint violation

When packing CALLL with OR, CALLL must go in the first slot.  The
instructions are executed simultaneously, so it doesn't matter which way
round they're packed from that point of view.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The console_cpu_notify() function runs with interrupts disabled in the
CPU_DYING case.  It therefore cannot block, for example, as will happen
when it calls console_lock().  Therefore, remove the CPU_DYING leg of
the switch statement to avoid this problem.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Fixes for i915, nouveau and radeon:

   - i915: haswell stability, modeset rework fallout, ums fix
   - nouveau: misc fixes from code rework
   - radeon: pll rework fixes, more 2 level PTE cleanups.
   - core: warning fixes on 32-bit."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits)
  nouveau: fix warning on 32-bit build.
  drm/nouveau/bios: fix typo in error message
  drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP
  drm/nv50/fb: fix double free of vram mm
  drm/nouveau/pm: do not stop reclocking if failing to set the fan speed
  drm/nouveau/pm: fix a typo related to the move to the therm subdev
  drm/nouveau/hwmon: fix the initialization condition
  drm: fix warning on 32-bit.
  drm: radeon: fix printk format warning
  drm/radeon: fix spelling typos in debugging output
  drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().
  drm/radeon: check if pcie gen 2 is already enabled (v2)
  drm/radeon/cayman: set VM max pfn at MC init
  drm/radeon: separate pt alloc from lru add
  drm/radeon: don't add the IB pool to all VMs v2
  drm/radeon: allocate page tables on demand v4
  drm/radeon: update comments to clarify VM setup (v2)
  drm/radeon: allocate PPLLs from low to high
  drm/radeon: fix compilation with backlight disabled
  drm/radeon: use %zu for formatting size_t
  ...

Pull ext2, ext3, quota fixes from Jan Kara:
 "Fix three regressions caused by user namespace conversions (ext2,
  ext3, quota) and minor ext3 fix and cleanup."

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Silence warning about PRJQUOTA not being handled in need_print_warning()
  ext3: fix return values on parse_options() failure
  ext2: fix return values on parse_options() failure
  ext3: ext3_bread usage audit
  ext3: fix possible non-initialized variable on htree_dirblock_to_tree()

Pull vfs fixes from Al Viro:
 "Fix for my braino in replace_fd(), dhowell's fix for the fallout from
  over-enthusiastic bo^Wdeclaration movements plus crapectomy that
  should've happened a long time ago (SEL_...  definitions)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bury SEL_{IN,OUT,EX}
  Unexport some bits of linux/fs.h
  fix a leak in replace_fd() users

Merge tag 'pinctrl-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 "A number of pinctrl fixes for the v3.7 series:
   - duplicate includes, section markup, code mishaps
   - erroneous return value in errorpath on the bcm2835 driver
   - remove an unused sirf function that was causing build errors
   - multiple-platform compilation stubs and a missed code review
     comment fixup on the nomadik pin controller"

* tag 'pinctrl-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl/nomadik: always use the simple irqdomain
  pinctrl/nomadik: provide stubs for legacy Nomadik
  pinctrl: remove duplicated include from pinctrl-xway.c
  pinctrl: sirf: remove sirfsoc_gpio_set_pull function
  pinctrl: fix return value in bcm2835_pinctrl_probe()
  pinctrl: remove duplicated include from pinctrl-bcm2835.c
  pinctrl: bcm2835: Use existing pointer to struct device
  pinctrl: samsung: use __devinit section for init code

Merge emailed patches from Corey Minyard:
 "Remove some bogus docs, Fix ACPI/IPMI interactions, fix some warnings,
  and add register spacing detection for PCI interfaces."

* ipmi:
  IPMI: Detect register spacing on PCI interfaces
  IPMI: Fix some uninitialized warning
  IPMI: Change link order
  ACPI: Reorder IPMI driver before any other ACPI drivers
  IPMI: Remove SMBus driver info from the docs

The IPMI spec defines a way to detect register spacing for PCI interfaces,
so implement it.
Signed-off-by: Steven Hsieh <sshsieh@broadcom.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There was a spot where the compiler couldn't tell some variables
would be set.  So initialize them to make the warning go away.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

IPMI must be initialised before ACPI in order to ensure that any IPMI
services are available before ACPI driver initialisation attempts to use
any IPMI operation regions.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Drivers may make calls that require the ACPI IPMI driver to have been
initialised already, so make sure that it appears earlier in the build
order.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Some documentation for the SMBus driver is in the IPMI docs, but that
code is not in the kernel tree at this point.  So remove the docs to
avoid confusion.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>