- 01 Jun, 2021 38 commits
-
-
Hannes Reinecke authored
Set the SCSI host status before calling fdomain_finish_cmd() and drop the last argument to that function. Link: https://lore.kernel.org/r/20210427083046.31620-36-hare@suse.deSigned-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
No point in having the driver providing its own definitions. Link: https://lore.kernel.org/r/20210427083046.31620-35-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
The driver should be using the standard SAM_STAT_ values, and not the Linux-specific ones. Link: https://lore.kernel.org/r/20210427083046.31620-34-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Instead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling. [mkp: zeroday bug report: s/SCpnt->result/SCpnt/] Link: https://lore.kernel.org/r/20210427083046.31620-33-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
The host byte in the SCSI status takes precedence during error recovery, so there is no point in setting the message byte in addition to a host byte which is not DID_OK. Link: https://lore.kernel.org/r/20210427083046.31620-32-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
The done() function is called with a host_byte indicating the actual error when the message byte is set. As the host byte takes precedence during error recovery we can drop setting the message byte if the host byte is set, too. The only other case is when the host byte is DID_OK, but in that case the message byte is always COMMAND_COMPLETE (i.e. 0), so we can drop it there, too. Link: https://lore.kernel.org/r/20210427083046.31620-31-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Instead of passing in the combined SCSI result values, split them off into separate status, message, and host byte values. Link: https://lore.kernel.org/r/20210427083046.31620-30-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Instead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling. And use SCSI result accessors while we're at it. Link: https://lore.kernel.org/r/20210427083046.31620-29-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Unused. Link: https://lore.kernel.org/r/20210427083046.31620-28-hare@suse.deReviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Hannes Reinecke authored
Instead of setting the message byte translate it to a host byte status. As the error recovery would map it to DID_ERROR anyway the translation doesn't change the SCSI error handling. Link: https://lore.kernel.org/r/20210427083046.31620-27-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Instead of setting the message byte translate it to the appropriate host byte. As error recovery would return DID_ERROR for any non-zero message byte the translation doesn't change the error handling. Link: https://lore.kernel.org/r/20210427083046.31620-26-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
The message byte always devolves to COMMAND_COMPLETE, so there is no point in setting it. Link: https://lore.kernel.org/r/20210427083046.31620-25-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
[mkp: fix kernel test robot warning] Link: https://lore.kernel.org/r/20210427083046.31620-24-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Link: https://lore.kernel.org/r/20210427083046.31620-22-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Make ql_pcmd() a void function and set the SCSI result directly. [mkp: fix zeroday 'result' warning] Link: https://lore.kernel.org/r/20210427083046.31620-21-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Drop message byte setting if the host byte is already set, and translate message bytes into the related host bytes when evaluating an overrun or underrun. Link: https://lore.kernel.org/r/20210427083046.31620-20-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Use standard macros to set the SCSI result and drop the internal ones. Link: https://lore.kernel.org/r/20210427083046.31620-19-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Add helper to convert message byte into a host byte code. Link: https://lore.kernel.org/r/20210427083046.31620-18-hare@suse.deReviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Hannes Reinecke authored
Add accessor functions for the host and status byte. Link: https://lore.kernel.org/r/20210427083046.31620-17-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
The message byte can take only two values, COMMAND_COMPLETE and ABORT. So we can easily map ABORT to DID_ABORT and not set the message byte. Link: https://lore.kernel.org/r/20210427083046.31620-16-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
The driver_byte field in the result is now unused, so we can drop the definitions. Link: https://lore.kernel.org/r/20210427083046.31620-15-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
The Xen guest might run against arbitrary backends, so the driver might receive a status with driver_byte set. Map these errors to DID_ERROR to be consistent with recent changes. Link: https://lore.kernel.org/r/20210427083046.31620-14-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
DRIVER_ERROR was supposed to signal an error generated by the driver, which xen-scsiback arguably isn't. Also the driver bytes don't have a detailed error recovery, so we should rather return DID_ERROR instead of DRIVER_ERROR. Link: https://lore.kernel.org/r/20210427083046.31620-13-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Set DID_TIME_OUT instead of DRIVER_TIMEOUT when a command is finally marked as failed after error recovery. Link: https://lore.kernel.org/r/20210427083046.31620-12-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
There is no point in returning DID_ABORT together with DRIVER_INVALID, as the caller couldn't care less where the abort originated. So drop the use of DRIVER_INVALID. Link: https://lore.kernel.org/r/20210427083046.31620-11-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Replace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition(). Audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present. [mkp: fix zeroday srp warning] Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Add a helper function scsi_status_is_check_condition() to encapsulate the frequent checks for SAM_STAT_CHECK_CONDITION. Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer() to format the buffer and set the correct SCSI status. Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
Return the actual error code in __scsi_execute() (which, according to the documentation, should have happened anyway). And audit all callers to cope with negative return values from __scsi_execute() and friends. [mkp: resolve conflict and return bool] Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
scsi_execute() will now return a negative error if there was an error prior to command submission; evaluate that instead if checking for DRIVER_ERROR. [mkp: build fix] Link: https://lore.kernel.org/r/20210427083046.31620-6-hare@suse.deSigned-off-by:
-
Hannes Reinecke authored
Reshuffle response handling in scsi_mode_sense() to make the code easier to follow. [mkp: fix build] Link: https://lore.kernel.org/r/20210427083046.31620-5-hare@suse.deSuggested-by:
-
Hannes Reinecke authored
The description for scsi_mode_sense() claims to return the number of valid bytes on success, which is not what the code does. Additionally there is no gain in returning the SCSI status, as everything the callers do is to check against scsi_result_is_good(), which is what scsi_mode_sense() does already. So change the calling convention to return a standard error code on failure, and 0 on success, and adapt the description and all callers. Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
The callers of sg_scsi_ioctl() already check for negative return values, so we can drop the usage of DRIVER_ERROR and return the error from blk_rq_map_kern() instead. Link: https://lore.kernel.org/r/20210427083046.31620-3-hare@suse.deReviewed-by:
-
Hannes Reinecke authored
The callers to st_scsi_execute() already check for negative return values, so we can drop the use of DRIVER_ERROR and return the actual error code. Link: https://lore.kernel.org/r/20210427083046.31620-2-hare@suse.deReviewed-by:
Kai Mäkisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Bart Van Assche authored
From ufshcd_transfer_req_compl(): Resetting interrupt aggregation counters first and reading the DOOR_BELL afterward allows us to handle all the completed requests. In order to prevent other interrupts starvation the DB is read once after reset. The down side of this solution is the possibility of false interrupt if device completes another request after resetting aggregation and before reading the DB. Prevent that ufshcd_intr() reports a false positive "Unhandled interrupt" message if the above scenario is triggered. Link: https://lore.kernel.org/r/20210519202058.12634-2-bvanassche@acm.org Cc: Stanley Chu <stanley.chu@mediatek.com> Cc: Can Guo <cang@codeaurora.org> Cc: Bean Huo <beanhuo@micron.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Asutosh Das <asutoshd@codeaurora.org> Suggested-by:Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Suganath Prabu S authored
If a firmware fault occurs while scanning the devices during IOC initialization then the driver issues the hard reset operation to recover the IOC. However, the driver is not issuing a Port enable request message as part of hard reset operation during IOC initialization. Due to this, the driver will not receive get any device discovery-related events and hence devices will not be accessible. Teach the driver to gracefully handle firmware faults while scanning for target devices during IOC initialization. Make the driver issue a port enable request message as part of hard reset operation. This permits receiving device discovery-related events from the firmware after the hard reset operation completes. Link: https://lore.kernel.org/r/20210518051625.1596742-4-suganath-prabu.subramani@broadcom.comSigned-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Suganath Prabu S authored
During first half of IOC initialization (i.e. before going for device scanning), if any firmware fault occurs then driver is aborting the IOC initialization operation. Modify the driver to issue a diag reset operation to recover IOC from fault state and reinitialize the IOC. Link: https://lore.kernel.org/r/20210518051625.1596742-3-suganath-prabu.subramani@broadcom.comSigned-off-by:
-
Suganath Prabu S authored
Do not cancel current running firmware event work if the event type is different from MPT3SAS_REMOVE_UNRESPONDING_DEVICES. Otherwise a deadlock can be observed while cancelling the current firmware event work if a hard reset operation is called as part of processing the current event. Link: https://lore.kernel.org/r/20210518051625.1596742-2-suganath-prabu.subramani@broadcom.comSigned-off-by:
-
- 22 May, 2021 2 commits
-
-
John Garry authored
The sysfs handling function sdev_store_queue_depth() enforces that the sdev queue depth cannot exceed shost can_queue. The initial sdev queue depth comes from shost cmd_per_lun. However, the LLDD may manually set cmd_per_lun to be larger than can_queue, which leads to an initial sdev queue depth greater than can_queue. Such an issue was reported in [0], which caused a hang. That has since been fixed in commit fc09acb7 ("scsi: scsi_debug: Fix cmd_per_lun, set to max_queue"). Stop this possibly happening for other drivers by capping shost cmd_per_lun at shost can_queue. [0] https://lore.kernel.org/linux-scsi/YHaez6iN2HHYxYOh@T590/ Link: https://lore.kernel.org/r/1621434662-173079-1-git-send-email-john.garry@huawei.comReviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
James Smart authored
Update lpfc version to 12.8.0.10 Link: https://lore.kernel.org/r/20210514195559.119853-12-jsmart2021@gmail.comCo-developed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
James Smart <jsmart2021@gmail.com> Signed-off-by:
-
