STRING_SELFTEST is presented in the "Library routines" menu.  Move it in
Kernel hacking > Kernel Testing and Coverage > Runtime Testing together
with other similar tests found in lib/

	--- Runtime Testing
	<*>   Test functions located in the hexdump module at runtime
	<*>   Test string functions (NEW)
	<*>   Test functions located in the string_helpers module at runtime
	<*>   Test strscpy*() family of functions at runtime
	<*>   Test kstrto*() family of functions at runtime
	<*>   Test printf() family of functions at runtime
	<*>   Test scanf() family of functions at runtime

Link: https://lkml.kernel.org/r/20210719185158.190371-1-mcroce@linux.microsoft.comSigned-off-by: Matteo Croce <mcroce@microsoft.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Fix MTE shared page detection

   - Enable selftest's use of PMU registers when asked to

  s390:

   - restore 5.13 debugfs names

  x86:

   - fix sizes for vcpu-id indexed arrays

   - fixes for AMD virtualized LAPIC (AVIC)

   - other small bugfixes

  Generic:

   - access tracking performance test

   - dirty_log_perf_test command line parsing fix

   - Fix selftest use of obsolete pthread_yield() in favour of
     sched_yield()

   - use cpu_relax when halt polling

   - fixed missing KVM_CLEAR_DIRTY_LOG compat ioctl"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: add missing compat KVM_CLEAR_DIRTY_LOG
  KVM: use cpu_relax when halt polling
  KVM: SVM: use vmcb01 in svm_refresh_apicv_exec_ctrl
  KVM: SVM: tweak warning about enabled AVIC on nested entry
  KVM: SVM: svm_set_vintr don't warn if AVIC is active but is about to be deactivated
  KVM: s390: restore old debugfs names
  KVM: SVM: delay svm_vcpu_init_msrpm after svm->vmcb is initialized
  KVM: selftests: Introduce access_tracking_perf_test
  KVM: selftests: Fix missing break in dirty_log_perf_test arg parsing
  x86/kvm: fix vcpu-id indexed array sizes
  KVM: x86: Check the right feature bit for MSR_KVM_ASYNC_PF_ACK access
  docs: virt: kvm: api.rst: replace some characters
  KVM: Documentation: Fix KVM_CAP_ENFORCE_PV_FEATURE_CPUID name
  KVM: nSVM: Swap the parameter order for svm_copy_vmrun_state()/svm_copy_vmloadsave_state()
  KVM: nSVM: Rename nested_svm_vmloadsave() to svm_copy_vmloadsave_state()
  KVM: arm64: selftests: get-reg-list: actually enable pmu regs in pmu sublist
  KVM: selftests: change pthread_yield to sched_yield
  KVM: arm64: Fix detection of shared VMAs on guest fault

Pull m68knommu fix from Greg Ungerer:
 "A single compile time fix"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k/coldfire: change pll var. to clk_pll

Pull ext2 and reiserfs fixes from Jan Kara:
 "A fix for the ext2 conversion to kmap_local() and two reiserfs
  hardening fixes"

* tag 'fixes_for_v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  reiserfs: check directory items on read from disk
  fs/ext2: Avoid page_address on pages returned by ext2_get_page
  reiserfs: add check for root_inode in reiserfs_fill_super

Merge tag 'platform-drivers-x86-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A set of bug-fixes and new hardware ids.

  Highlights:

   - amd-pmc fixes

   - think-lmi fixes

   - various new hardware-ids"

* tag 'platform-drivers-x86-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2
  platform/x86: intel-hid: add Alder Lake ACPI device ID
  platform/x86: think-lmi: Fix possible mem-leaks on tlmi_analyze() error-exit
  platform/x86: think-lmi: Split kobject_init() and kobject_add() calls
  platform/x86: think-lmi: Move pending_reboot_attr to the attributes sysfs dir
  platform/x86: amd-pmc: Fix undefined reference to __udivdi3
  platform/x86: amd-pmc: Fix missing unlock on error in amd_pmc_send_cmd()
  platform/x86: wireless-hotkey: remove hardcoded "hp" from the error message
  platform/x86: amd-pmc: Use return code on suspend
  platform/x86: amd-pmc: Add new acpi id for future PMC controllers
  platform/x86: amd-pmc: Add support for ACPI ID AMDI0006
  platform/x86: amd-pmc: Add support for logging s0ix counters
  platform/x86: amd-pmc: Add support for logging SMU metrics
  platform/x86: amd-pmc: call dump registers only once
  platform/x86: amd-pmc: Fix SMU firmware reporting mechanism
  platform/x86: amd-pmc: Fix command completion code
  platform/x86: think-lmi: Add pending_reboot support

This file was given GPL-2.0 license. But LGPL-2.1 makes more sense
as it needs to be used by libraries outside of the kernel source tree.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

unix_gc() assumes that candidate sockets can never gain an external
reference (i.e.  be installed into an fd) while the unix_gc_lock is
held.  Except for MSG_PEEK this is guaranteed by modifying inflight
count under the unix_gc_lock.

MSG_PEEK does not touch any variable protected by unix_gc_lock (file
count is not), yet it needs to be serialized with garbage collection.
Do this by locking/unlocking unix_gc_lock:

 1) increment file count

 2) lock/unlock barrier to make sure incremented file count is visible
    to garbage collection

 3) install file into fd

This is a lock barrier (unlike smp_mb()) that ensures that garbage
collection is run completely before or completely after the barrier.

Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reported as working here:
https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-879398883Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.netSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Alder Lake has a new ACPI ID for Intel HID event filter device.
Signed-off-by: Ping Bao <ping.a.bao@intel.com>
Link: https://lore.kernel.org/r/20210721225615.20575-1-ping.a.bao@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Pull rdma fixes from Jason Gunthorpe:
 "Nothing very exciting here, mainly just a bunch of irdma fixes. irdma
  is a new driver this cycle so it to be expected.

   - Many more irdma fixups from bots/etc

   - bnxt_re regression in their counters from a FW upgrade

   - User triggerable memory leak in rxe"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/irdma: Change returned type of irdma_setup_virt_qp to void
  RDMA/irdma: Change the returned type of irdma_set_hw_rsrc to void
  RDMA/irdma: change the returned type of irdma_sc_repost_aeq_entries to void
  RDMA/irdma: Check vsi pointer before using it
  RDMA/rxe: Fix memory leak in error path code
  RDMA/irdma: Change the returned type to void
  RDMA/irdma: Make spdxcheck.py happy
  RDMA/irdma: Fix unused variable total_size warning
  RDMA/bnxt_re: Fix stats counters

Pull cgroup fix from Tejun Heo:
 "Fix leak of filesystem context root which is triggered by LTP.

  Not too likely to be a problem in non-testing environments"

* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup1: fix leaked context root causing sporadic NULL deref in LTP

The arguments to the KVM_CLEAR_DIRTY_LOG ioctl include a pointer,
therefore it needs a compat ioctl implementation.  Otherwise,
32-bit userspace fails to invoke it on 64-bit kernels; for x86
it might work fine by chance if the padding is zero, but not
on big-endian architectures.

Reported-by: Thomas Sattler
Cc: stable@vger.kernel.org
Fixes: 2a31b9db ("kvm: introduce manual dirty log reprotect")
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

SMT siblings share caches and other hardware, and busy halt polling
will degrade its sibling performance if its sibling is working

Sean Christopherson suggested as below:

"Rather than disallowing halt-polling entirely, on x86 it should be
sufficient to simply have the hardware thread yield to its sibling(s)
via PAUSE.  It probably won't get back all performance, but I would
expect it to be close.
This compiles on all KVM architectures, and AFAICT the intended usage
of cpu_relax() is identical for all architectures."
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Message-Id: <20210727111247.55510-1-lirongqing@baidu.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Currently when SVM is enabled in guest CPUID, AVIC is inhibited as soon
as the guest CPUID is set.

AVIC happens to be fully disabled on all vCPUs by the time any guest
entry starts (if after migration the entry can be nested).

The reason is that currently we disable avic right away on vCPU from which
the kvm_request_apicv_update was called and for this case, it happens to be
called on all vCPUs (by svm_vcpu_after_set_cpuid).

After we stop doing this, AVIC will end up being disabled only when
KVM_REQ_APICV_UPDATE is processed which is after we done switching to the
nested guest.

Fix this by just using vmcb01 in svm_refresh_apicv_exec_ctrl for avic
(which is a right thing to do anyway).
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It is possible that AVIC was requested to be disabled but
not yet disabled, e.g if the nested entry is done right
after svm_vcpu_after_set_cpuid.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

It is possible for AVIC inhibit and AVIC active state to be mismatched.
Currently we disable AVIC right away on vCPU which started the AVIC inhibit
request thus this warning doesn't trigger but at least in theory,
if svm_set_vintr is called at the same time on multiple vCPUs,
the warning can happen.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210713142023.106183-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

commit bc9e9e67 ("KVM: debugfs: Reuse binary stats descriptors")
did replace the old definitions with the binary ones. While doing that
it missed that some files are names different than the counters. This
is especially important for kvm_stat which does have special handling
for counters named instruction_*.

Fixes: commit bc9e9e67 ("KVM: debugfs: Reuse binary stats descriptors")
CC: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210726150108.5603-1-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Right now, svm_hv_vmcb_dirty_nested_enlightenments has an incorrect
dereference of vmcb->control.reserved_sw before the vmcb is checked
for being non-NULL.  The compiler is usually sinking the dereference
after the check; instead of doing this ourselves in the source,
ensure that svm_hv_vmcb_dirty_nested_enlightenments is only called
with a non-NULL VMCB.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Untested for now due to issues with my AMD machine. - Paolo]

This test measures the performance effects of KVM's access tracking.
Access tracking is driven by the MMU notifiers test_young, clear_young,
and clear_flush_young. These notifiers do not have a direct userspace
API, however the clear_young notifier can be triggered by marking a
pages as idle in /sys/kernel/mm/page_idle/bitmap. This test leverages
that mechanism to enable access tracking on guest memory.

To measure performance this test runs a VM with a configurable number of
vCPUs that each touch every page in disjoint regions of memory.
Performance is measured in the time it takes all vCPUs to finish
touching their predefined region.

Example invocation:

  $ ./access_tracking_perf_test -v 8
  Testing guest mode: PA-bits:ANY, VA-bits:48,  4K pages
  guest physical test memory offset: 0xffdfffff000

  Populating memory             : 1.337752570s
  Writing to populated memory   : 0.010177640s
  Reading from populated memory : 0.009548239s
  Mark memory idle              : 23.973131748s
  Writing to idle memory        : 0.063584496s
  Mark memory idle              : 24.924652964s
  Reading from idle memory      : 0.062042814s

Breaking down the results:

 * "Populating memory": The time it takes for all vCPUs to perform the
   first write to every page in their region.

 * "Writing to populated memory" / "Reading from populated memory": The
   time it takes for all vCPUs to write and read to every page in their
   region after it has been populated. This serves as a control for the
   later results.

 * "Mark memory idle": The time it takes for every vCPU to mark every
   page in their region as idle through page_idle.

 * "Writing to idle memory" / "Reading from idle memory": The time it
   takes for all vCPUs to write and read to every page in their region
   after it has been marked idle.

This test should be portable across architectures but it is only enabled
for x86_64 since that's all I have tested.
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

There is a missing break statement which causes a fallthrough to the
next statement where optarg will be null and a segmentation fault will
be generated.

Fixes: 9e965bb7 ("KVM: selftests: Add backing src parameter to dirty_log_perf_test")
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210713220957.3493520-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM_MAX_VCPU_ID is the maximum vcpu-id of a guest, and not the number
of vcpu-ids. Fix array indexed by vcpu-id to have KVM_MAX_VCPU_ID+1
elements.

Note that this is currently no real problem, as KVM_MAX_VCPU_ID is
an odd number, resulting in always enough padding being available at
the end of those arrays.

Nevertheless this should be fixed in order to avoid rare problems in
case someone is using an even number for KVM_MAX_VCPU_ID.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20210701154105.23215-2-jgross@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull workqueue fix from Tejun Heo:
 "Fix a use-after-free in allocation failure handling path"

* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: fix UAF in pwq_unbound_release_workfn()

MSR_KVM_ASYNC_PF_ACK MSR is part of interrupt based asynchronous page fault
interface and not the original (deprecated) KVM_FEATURE_ASYNC_PF. This is
stated in Documentation/virt/kvm/msr.rst.

Fixes: 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20210722123018.260035-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Message-Id: <ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

'KVM_CAP_ENFORCE_PV_CPUID' doesn't match the define in
include/uapi/linux/kvm.h.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210722092628.236474-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Make svm_copy_vmrun_state()/svm_copy_vmloadsave_state() interface match
'memcpy(dest, src)' to avoid any confusion.

No functional change intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210719090322.625277-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

To match svm_copy_vmrun_state(), rename nested_svm_vmloadsave() to
svm_copy_vmloadsave_state().

Opportunistically add missing braces to 'else' branch in
vmload_vmsave_interception().

No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210716144104.465269-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

DEFINE_CLK() makes the variable name be clk_xyz, so variable
'pll' should instead be 'clk_pll'.

In file included from ../arch/m68k/coldfire/m525x.c:12:
../arch/m68k/coldfire/m525x.c:29:30: error: 'pll' undeclared here (not in a function)
   29 |  CLKDEV_INIT(NULL, "pll.0", &pll),
      |                              ^~~
../include/linux/clkdev.h:30:10: note: in definition of macro 'CLKDEV_INIT'
   30 |   .clk = c, \
      |          ^
In file included from ../arch/m68k/coldfire/m525x.c:21:
../arch/m68k/include/asm/mcfclk.h:43:27: warning: 'clk_pll' defined but not used [-Wunused-variable]
   43 |         static struct clk clk_##clk_ref = { \
      |                           ^~~~
../arch/m68k/coldfire/m525x.c:25:1: note: in expansion of macro 'DEFINE_CLK'
   25 | DEFINE_CLK(pll, "pll.0", MCF_CLK);
      | ^~~~~~~~~~

Fixes: 63aadb77 ("m68k: coldfire: use clkdev_lookup on most coldfire")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>

gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e6 ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:

    kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier]
    static inline void __always_inline idle_init(unsigned int cpu)
                       ^

which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.

We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that.  And while the
compiler may not care, we put the inline specifier before the types.

So it should be just

    static __always_inline void idle_init(unsigned int cpu)

instead.

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc fixes from Michael Ellerman:

 - Fix guest to host memory corruption in H_RTAS due to missing nargs
   check.

 - Fix guest triggerable host crashes due to bad handling of nested
   guest TM state.

 - Fix possible crashes due to incorrect reference counting in
   kvm_arch_vcpu_ioctl().

 - Two commits fixing some regressions in KVM transactional memory
   handling introduced by the recent rework of the KVM code.

Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling.

* tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
  KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
  KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
  KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
  KVM: PPC: Book3S HV P9: Fix guest TM support

Pull timer fixes from Thomas Gleixner:
 "A small set of timer related fixes:

   - Plug a race between rearm and process tick in the posix CPU timers
     code

   - Make the optimization to avoid recalculation of the next timer
     interrupt work correctly when there are no timers pending"

* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Fix get_next_timer_interrupt() with no timers pending
  posix-cpu-timers: Fix rearm racing against process tick

Pull x86 jump label fix from Thomas Gleixner:
 "A single fix for jump labels to prevent the compiler from agressive
  un-inlining which results in a section mismatch"

* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining

Pull EFI fixes from Thomas Gleixner:
 "A set of EFI fixes:

   - Prevent memblock and I/O reserved resources to get out of sync when
     EFI memreserve is in use.

   - Don't claim a non-existing table is invalid

   - Don't warn when firmware memory is already reserved correctly"

* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/mokvar: Reserve the table only if it is in boot services data
  efi/libstub: Fix the efi_load_initrd function description
  firmware/efi: Tell memblock about EFI iomem reservations
  efi/tpm: Differentiate missing and invalid final event log table.

Pull core fix from Thomas Gleixner:
 "A single update for the boot code to prevent aggressive un-inlining
  which causes a section mismatch"

* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining

Pull dma-mapping fix from Christoph Hellwig:

 - handle vmalloc addresses in dma_common_{mmap,get_sgtable} (Roman
   Skakun)

* tag 'dma-mapping-5.14-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}

Pull cifs fixes from Steve French:
 "Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
  fixes, and two trivial coverity cleanups"

* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix fallocate when trying to allocate a hole.
  CIFS: Clarify SMB1 code for POSIX delete file
  CIFS: Clarify SMB1 code for POSIX Create
  cifs: support share failover when remounting
  cifs: only write 64kb at a time when fallocating a small region of a file

Pull RISC-V fixes from Palmer Dabbelt:

 - properly set the memory size, which fixes 32-bit systems

 - allow initrd to load anywhere in memory, rather that restricting it
   to the first 256MiB

 - fix the 'mem=' parameter on 64-bit systems to properly account for
   the maximum supported memory now that the kernel is outside the
   linear map

 - avoid installing mappings into the last 4KiB of memory, which
   conflicts with error values

 - avoid the stack from being freed while it is being walked

 - a handful of fixes to the new copy to/from user routines

* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: __asm_copy_to-from_user: Fix: Typos in comments
  riscv: __asm_copy_to-from_user: Remove unnecessary size check
  riscv: __asm_copy_to-from_user: Fix: fail on RV32
  riscv: __asm_copy_to-from_user: Fix: overrun copy
  riscv: stacktrace: pin the task's stack in get_wchan
  riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
  riscv: Make sure the linear mapping does not use the kernel mapping
  riscv: Fix memory_limit for 64-bit kernel
  RISC-V: load initrd wherever it fits into memory
  riscv: Fix 32-bit RISC-V boot failure

Commit 71f64283 ("ACPI: utils: Fix reference counting in
for_each_acpi_dev_match()") started doing "acpi_dev_put()" on a pointer
that was possibly NULL.  That fails miserably, because that helper
inline function is not set up to handle that case.

Just make acpi_dev_put() silently accept a NULL pointer, rather than
calling down to put_device() with an invalid offset off that NULL
pointer.

Link: https://lore.kernel.org/lkml/a607c149-6bf6-0fd0-0e31-100378504da2@kernel.dk/Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Tested-by: Daniel Scally <djrscally@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI fixes from James Bottomley:
 "Four fixes, all in drivers, all of which can lead to user visible
  problems in certain situations"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: Fix NULL dereference on XCOPY completion
  scsi: mpt3sas: Transition IOC to Ready state during shutdown
  scsi: target: Fix protect handling in WRITE SAME(32)
  scsi: iscsi: Fix iface sysfs attr detection