For a lot of use cases we need 64bit sequence numbers. Currently drivers
overload the dma_fence structure to store the additional bits.

Stop doing that and make the sequence number in the dma_fence always
64bit.

For compatibility with hardware which can do only 32bit sequences the
comparisons in __dma_fence_is_later only takes the lower 32bits as significant
when the upper 32bits are all zero.

v2: change the logic in __dma_fence_is_later
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/266927/

So qxl kernel patches are sent to the spice-devel list for review.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181121090129.23506-1-kraxel@redhat.com

I missed one case during the recent revert of the replace_fence
interface change.

Fixes: 0b258ed1 drm: revert "expand replace_fence to support timeline point v2"
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/266134/

This reverts commit 9a09a423.

The whole interface isn't thought through. Since this function can't
fail we actually can't allocate an object to store the sync point.

Sorry, I should have taken the lead on this from the very beginning and
reviewed it more thoughtfully. Going to propose a new interface as a
follow up change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265580/

use kmemdup rather than duplicating its implementation
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1543471233-159568-1-git-send-email-yuehaibing@huawei.com

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/vkms/vkms_plane.c: In function 'vkms_prepare_fb':
drivers/gpu/drm/vkms/vkms_plane.c:144:26: warning:
 variable 'vkms_obj' set but not used [-Wunused-but-set-variable]

It never used since introduction in commit
8ce1bb0b ("drm/vkms: map/unmap buffers in [prepare/cleanup]_fb hooks")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1543634444-186448-1-git-send-email-yuehaibing@huawei.com

H6 is first Allwinner SoC which supports 10 bit colors, HDR and AFBC.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-9-jernej.skrabec@siol.net

The core scheduler tells us when the job is pushed to the scheduler's
queue, and I had the job_run functions saying when they actually queue
the job to the hardware.  By adding tracepoints for the very top of
the ioctls and the IRQs signaling job completion, "perf record -a -e
v3d:.\* -e gpu_scheduler:.\* <job>; perf script" gets you a pretty
decent timeline.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-5-eric@anholt.netReviewed-by: Dave Emett <david.emett@broadcom.com>

We shouldn't be returning v3d-render for our new queue.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 83d5139982db ("drm/v3d: Add support for submitting jobs to the TFU.")
Link: https://patchwork.freedesktop.org/patch/msgid/20181201005759.28093-6-eric@anholt.netReviewed-by: Dave Emett <david.emett@broadcom.com>

Extract of useful code from the timeline work. Let's use just a single
stub fence instance instead of allocating a new one all the time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/

Extract of useful code from the timeline work. This provides a function
to return a stub or dummy fence which is always signaled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/

The change adds support for the AU Optronics G101EVN010 10.1" TFT LCD
panel.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Reviewed-by: Rob Herring <robh@kernel.org>
[treding@nvidia.com: sort new entry alphabetically]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540480173-12009-2-git-send-email-alex.gonzalez@digi.com

On the Amlogic GXL & GXM SoCs, a bug occurs on the primary plane when
alpha is used where the alpha is not aligned with the pixel content.

The workaround Amlogic implemented is to reset the OSD1 plane hardware
block each time the plane is (re)enabled, solving the issue.

In the reset, we still need to save the content of 2 registers which
depends on the status of the plane, in addition to reload the scaler
conversion matrix at the same time.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fixed typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20181128100734.6536-1-narmstrong@baylibre.com

v3d_bo_get_pages() checks this to decide to map the imported buffer
instead of the backing shmem file.  The caller was about to set this
value anyway, and there's no error path in between.  Ideally we
wouldn't even allocate the shmem file for our imports, but that's a
more invasive fix.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94 ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-3-eric@anholt.netAcked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Emett <david.emett@broadcom.com>

They were unused, as Dave Emett noticed in TFU review.
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Dave Emett <david.emett@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128230927.10951-2-eric@anholt.netReviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The TFU can copy from raster, UIF, and SAND input images to UIF output
images, with optional mipmap generation.  This will certainly be
useful for media EGL image input, but is also useful immediately for
mipmap generation without bogging the V3D core down.

For now we only run the queue 1 job deep, and don't have any hang
recovery (though I don't think we should need it, with TFU).  Queuing
multiple jobs in the HW will require synchronizing the YUV coefficient
regs updates since they don't get FIFOed with the job.

v2: Change the ioctl to IOW instead of IOWR, always set COEF0, explain
    why TFU is AUTH, clarify the syncing docs, drop the unused TFU
    interrupt regs (you're expected to use the hub's), don't take
    &bo->base for NULL bos.
v3: Fix a little whitespace alignment (noticed by checkpatch), rebase
    on drm_sched_job_cleanup() changes.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Dave Emett <david.emett@broadcom.com> (v2)
Link: https://patchwork.freedesktop.org/patch/264607/

I've misplaced two functions by accident:
- drm_atomic_helper_duplicate_state is really part of the
  resume/suspend/shutdown device-wide helpers.
- drm_atomic_helper_legacy_gamma_set is part of the legacy ioctl
  compat helpers.

Move them both back.

Fixes: 9ef8a9dc ("drm: Extract drm_atomic_state_helper.[hc]")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128100728.4674-1-daniel.vetter@ffwll.ch

Kbuild was complaining about:
>> drivers/gpu/drm/drm_atomic_helper.c:3169:27: warning: 'state' may be used uninitialized in this function [-Wmaybe-uninitialized]

Now state can't actually be used uninitialized, but we'll assign a value
anyways so it stops bellyaching.

Kbuild config:
	link:	https://lists.01.org/pipermail/kbuild-all/2018-November/055374.html
	tree:   git://anongit.freedesktop.org/drm/drm-misc for-linux-next
	head:   b7ea04d2
	commit: b7ea04d2 [4/4] drm: Add
	DRM_MODESET_LOCK_BEGIN/END helpers
	config: x86_64-randconfig-x017-201847 (attached as .config)
	compiler: gcc-7 (Debian 7.3.0-1) 7.3.0
	reproduce:
		git checkout b7ea04d2
		# save the attached .config to linux build tree
		make ARCH=x86_64

Fixes: b7ea04d2 ("drm: Add DRM_MODESET_LOCK_BEGIN/END helpers")
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[seanpaul added extra details on airlied's suggestion]
Link: https://patchwork.freedesktop.org/patch/msgid/20181129203652.223634-1-sean@poorly.run

Need to pick up the following patch to fix htmldocs build

167bfe53 ("Documentation: drm: Remove dangling pointer from drm-mm.rst")
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Now that scaling is allowed on cursor planes, we can also allow YUV
formats.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-6-boris.brezillon@bootlin.com

Now that async update has been reworked to allow scaled planes to be
updated asynchronously when the scaling params do not change, we can
remove the NO_SCALING constraint on cursor planes.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-5-boris.brezillon@bootlin.com

vc4_plane_atomic_async_check() was only based on the
state->{crtc,src}_{w,h} which was fine since scaling was not allowed on
the cursor plane.

We are about to change that to properly support underscan, and, in order
to make the async check more reliable, we call vc4_plane_mode_set()
from there and check that only the pos0, pos2 and ptr0 entries in the
dlist have changed.

In vc4_plane_atomic_async_update(), we no longer call
vc4_plane_atomic_check() since vc4_plane_mode_set() has already been
called in vc4_plane_atomic_async_check(), and we don't need to allocate
a new LBM region (we reuse the one from the current state).

Note that we now have to manually update each field of the current
plane state since it's no longer updated in place (not sure we have
to sync all of them, but it's harmless if we do).
We also drop the vc4_plane_async_set_fb() call (ptr0 dlist entry has
been properly updated in vc4_plane_mode_set())
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-4-boris.brezillon@bootlin.com

We are about to use vc4_plane_mode_set() in the async check path, but
async check can decide that async update is not possible and force the
driver to fallback to a sync update.

All the checks that have been done on the plane state during async check
stay valid, and checking it again is not necessary. Add a ->checked
field to vc4_plane_state, and use it to track the status of the state
(checked or not).
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-3-boris.brezillon@bootlin.com

We are about to use vc4_plane_mode_set() in the async check path, and
async updates require that LBM size stay the same since they reuse the
LBM from the previous state. So we definitely don't want to allocate a
new LBM region that we know for sure will be free right away.

Move the LBM allocation out of vc4_plane_mode_set() and call the new
function (vc4_plane_update_lbm()) from vc4_plane_atomic_check().
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-2-boris.brezillon@bootlin.com

LBM is not needed when vertical scaling is disabled. Return 0 in this
case to avoid allocating LBM memory that will anyway be unused.

While at it, drop the test on ->is_unity which is now redundant.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-1-boris.brezillon@bootlin.com

Fixes htmldocs build error:
Error: Cannot open file ../drivers/gpu/drm/drm_global.c

Fixes: 2bb42410 ("drm: Remove drm_global.{c,h} v2")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Junwei Zhang <Jerry.Zhang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129155522.33749-1-sean@poorly.run

We should also get the drivers using the helpers. Seems like a good
intermediate TODO item.

Changes in v2:
- Add line about replacing drm_modest_lock_all() (Daniel)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129195838.222031-1-sean@poorly.run

This patch adds a couple of helpers to remove the boilerplate involved
in grabbing all of the modeset locks.

I've also converted the obvious cases in drm core to use the helpers.

The only remaining instance of drm_modeset_lock_all_ctx() is in
drm_framebuffer. It's complicated by the state clear that occurs on
deadlock. ATM, there's no way to inject code in the deadlock path with
the helpers, so it's unfit for conversion.

Changes in v2:
- Relocate ret argument to the end of the list (Daniel)
- Incorporate Daniel's doc suggestions (Daniel)
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-4-sean@poorly.run

drm_atomic_state_put doesn't require any locking, and this makes things
easier for switching to modeset_lock_all helpers in a future patch

Changes in v2:
- Moved state->acquire_ctx clear to a separate patch (Daniel)
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-3-sean@poorly.run

Instead of always re-initializing the variables we need to clean up on
out, move the re-initialization into the branch that goes back to retry
label.

This is a lateral move right now, but will allow us to pull out the
modeset locking into common code. I kept this change separate to make
things easier to review.

Changes in v2:
- None
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-2-sean@poorly.run

drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to
the context given in the argument and leaves it in state after it
quits. The lifetime of state and context are not guaranteed to be the
same, so we shouldn't leave that pointer hanging around. This patch
resets the context to NULL to avoid any oopses.

Changes in v2:
- Added to the set
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-1-sean@poorly.run

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-4-noralf@tronnes.org

Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181128151021.29565-3-kraxel@redhat.com

Since commit "9fdd90c0 drm/virtio: add virtio_gpu_alloc_fence()"
fences are not allocated any more by virtio_gpu_fence_emit().  So there
is no need to pass down a reference to the fence pointer, a plain
pointer is enough now.

Convert virtio_gpu_fence_emit() and callers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181128151021.29565-2-kraxel@redhat.com

We need to handle allocation failures and bail out. While at it, tune
the allocation failures down to debug level.

syzbot injected an allocation failure and then hit this WARN_ON.

Reported-by: syzbot+eb6e5365f23c02517dda@syzkaller.appspotmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128101033.4840-1-daniel.vetter@ffwll.ch

Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm-misc-next for v4.21:

Core Changes:
- Merge drm_info.c into drm_debugfs.c
- Complete the fake drm_crtc_commit's hw_done/flip_done sooner.
- Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now.
- Decrease stack use of drm_gem_prime_mmap.
- Improve documentation for dumb callbacks.

Driver Changes:
- Add edid support to virtio.
- Wait on implicit fence in meson and sun4i.
- Add support for BGRX8888 to sun4i.
- Preparation patches for sun4i driver to start supporting linear and tiled YUV formats.
- Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings.
- Drop custom dumb_map in vkms.
- Small fixes and cleanups to v3d.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com

R-Car DU changes for v4.21:

- R8A7744 and R8A77470 support
- R8A77965 LVDS support
- Miscellaneous fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3165107.GPE8tO0qUE@avalon

Changes outside i915:
- Connector property to limit max bpc (Radhakrishna)
- Fix LPE audio runtime PM and deinit (Ville)
- DP FEC prep work (Anusha)
- Mark pinned shmemfs pages as unevictable (Kuo-Hsin)
- Backmerge drm-next (Jani)

Inside i915:
- Revert OA UAPI change that lacks userspace (Joonas)
- Register macro cleanup (Jani)
- 32-bit build fixes on pin flags (Chris)
- Fix MG DP mode and PHY gating for HDMI (Imre)
- DP MST race, hpd and irq fixes (Lyude)
- Combo PHY fixes and cleanup (Imre, Lucas)
- Move display init and cleanup under modeset init and cleanup (José)
- PSR fixes (José)
- Subslice size fixes (Daniele)
- Abstract and clean up fixed point helpers (Jani)
- Plane input CSC for YUV to RGB conversion (Uma)
- Break long iterations for get/put shmemfs pages (Chris)
- Improve DDI encoder hw state readout sanity checks (Imre)
- Fix power well leaks for MST (José)
- Scaler fixes (Ville)
- Watermark fixes (Ville)
- Fix VLV/CHV DSI panel orientation readout (Ville)
- ICL rawclock fixes (Paulo)
- Workaround DMC power well request issues (Imre)
- Plane allocation fix (Maarten)
- Transcoder enum value/ordering robustness fixes (Imre)
- UTS_RELEASE build dependency fix (Hans Holmberg)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k1l4cesj.fsf@intel.com