- 29 Mar, 2024 17 commits
-
-
Hangbin Liu authored
Some times it would be convenient to read the integer as hex, like mask values. Suggested-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240327123130.1322921-2-liuhangbin@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Petr Machata says: ==================== selftests: Fixes for kernel CI As discussed on the bi-weekly call on Jan 30, and in mailing around kernel CI effort, some changes are desirable in the suite of forwarding selftests the better to work with the CI tooling. Namely: - The forwarding selftests use a configuration file where names of interfaces are defined and various variables can be overridden. There is also forwarding.config.sample that users can use as a template to refer to when creating the config file. What happens a fair bit is that users either do not know about this at all, or simply forget, and are confused by cryptic failures about interfaces that cannot be created. In patches #1 - #3 have lib.sh just be the single source of truth with regards to which variables exist. That includes the topology variables which were previously only in the sample file, and any "tweak variables", such as what tools to use, sleep times, etc. forwarding.config.sample then becomes just a placeholder with a couple examples. Unless specific HW should be exercised, or specific tools used, the defaults are usually just fine. - Several net/forwarding/ selftests (and one net/ one) cannot be run on veth pairs, they need an actual HW interface to run on. They are generic in the sense that any capable HW should pass them, which is why they have been put to net/forwarding/ as opposed to drivers/net/, but they do not generalize to veth. The fact that these tests are in net/forwarding/, but still complaining when run, is confusing. In patches #4 - #6 move these tests to a new directory drivers/net/hw. - The following patches extend the codebase to handle well test results other than pass and fail. Patch #7 is preparatory. It converts several log_test_skip to XFAIL, so that tests do not spuriously end up returning non-0 when they are not supposed to. In patches #8 - #10, introduce some missing ksft constants, then support having those constants in RET, and then finally in EXIT_STATUS. - The traffic scheduler tests generate a large amount of network traffic to test the behavior of the scheduler. This demands a relatively high-performance computer. On slow machines, such as with a debugging kernel, the test would spuriously fail. It can still be useful to "go through the motions" though, to possibly catch bugs in setup of the scheduler graph and passing packets around. Thus we still want to run the tests, just with lowered demands. To that end, in patches #11 - #12, introduce an environment variable KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow, is provided to mark performance-sensitive parts of the selftest. - In patch #13, use a similar mechanism to mark a NH group stats selftest to XFAIL HW stats tests when run on VETH pairs. - All these changes complicate the hitherto straightforward logging and checking logic, so in patch #14, add a selftest that checks this functionality in lib.sh. v1 (vs. an RFC circulated through linux-kselftest): - Patch #9: - Clarify intended usage by s/set_ret/ret_set_ksft_status/, s/nret/ksft_status/ ==================== Link: https://lore.kernel.org/r/cover.1711464583.git.petrm@nvidia.comSigned-off-by: -
Petr Machata authored
Rerunning various scenarios to make sure lib.sh changes do not impact the observable behavior is no fun. Add a selftest at least for the bare basics -- the mechanics of setting RET, retmsg, and EXIT_STATUS. Since the selftest itself uses lib.sh, it would be possible to break lib.sh in such a way that invalidates result of the selftest. Since the metatest only uses the bare basics (just pass/fail), hopefully such fundamental breakages would be noticed. Signed-off-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/6d25cedbf2d4b83614944809a34fe023fbe8db38.1711464583.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
When the NH group stats tests are currently run on a veth topology, the HW-stats leg of each test is SKIP'ped. But kernel networking CI interprets skips as a sign that tooling is missing, and prompts maintainer investigation. Lack of capability to pass a test should be expressed as XFAIL. Selftests that require HW should normally be put in drivers/net/hw, but doing so for the NH counter selftests would just lead to a lot of duplicity. So instead, introduce a helper, xfail_on_veth(), which can be used to mark selftests that should XFAIL instead of FAILing when run on a veth topology. On non-veth topology, they don't do anything. Use the helper in the HW-stats part of router_mpath_nh_lib selftest. Signed-off-by:
-
Petr Machata authored
When run on a slow machine, the scheduler traffic tests can be expected to fail, and should be reported as XFAIL in that case. Therefore run these tests through the perf_sensitive wrapper. Signed-off-by:
-
Petr Machata authored
Several tests in the suite use large amounts of traffic to e.g. cause congestion and evaluate RED or shaper performance. These tests will not run well on a slow machine, be it one with heavy debug kernel, or a VM, or e.g. a single-board computer. Allow users to specify an environment variable, KSFT_MACHINE_SLOW=yes, to indicate that the tests are being run on one such machine. Performance sensitive tests can then use a new helper, xfail_on_slow(), to mark parts of the test that are sensitive to low-performance machines. The helper can be used to just mark the whole suite, like so: xfail_on_slow tests_run ... or, on the other side of the granularity spectrum, to override individual checks: xfail_on_slow check_err $? "Expected much, got little." Signed-off-by:
-
Petr Machata authored
In a previous patch, the interpretation of RET value was changed to mean the kselftest framework constant with the test outcome: $ksft_pass, $ksft_xfail, etc. Update log_test() to recognize the various possible RET values. Then have EXIT_STATUS track the RET value of the current test. This differs subtly from the way RET tracks the value: while for RET we want to recognize XFAIL as a separate status, for purposes of exit code, we want to to conflate XFAIL and PASS, because they both communicate non-failure. Thus add a new helper, ksft_exit_status_merge(). With this log_test_skip() and log_test_xfail() can be reexpressed as thin wrappers around log_test. Signed-off-by:
-
Petr Machata authored
The variable RET keeps track of whether the test under execution has so far failed or not. Currently it works in binary fashion: zero means everything is fine, non-zero means something failed. log_test() then uses the value to given a human-readable message. In order to allow log_test() to report skips and xfails, the semantics of RET need to be more fine-grained. Therefore have RET value be one of kselftest framework constants: $ksft_fail, $ksft_xfail, etc. The current logic in check_err() is such that first non-zero value of RET trumps all those that follow. But that is not right when RET has more fine-grained value semantics. Different outcomes have different weights. The results of PASS and XFAIL are mostly the same: they both communicate a test that did not go wrong. SKIP communicates lack of tooling, which the user should go and try to fix, and as such should not be overridden by the passes. So far, the higher-numbered statuses can be considered weightier. But FAIL should be the weightiest. Add a helper, ksft_status_merge(), which merges two statuses in a way that respects the above conditions. Express it in a generic manner, because exit status merge is subtly different, and we want to reuse the same logic. Use the new helper when setting RET in check_err(). Re-express check_fail() in terms of check_err() to avoid duplication. Signed-off-by:
-
Petr Machata authored
The following patches will operate with more exit codes besides ksft_skip. Add them here. Additionally, move a duplicated skip exit code definition from forwarding/tc_tunnel_key.sh. Keep a similar duplicate in forwarding/devlink_lib.sh, because even though lib.sh will have been sourced in all cases where devlink_lib is, the inclusion is not visible in the file itself, and relying on it would be confusing. Cc: Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Petr Machata authored
The SKIP return should be used for cases where tooling of the machine under test is lacking. For cases where HW is lacking, the appropriate outcome is XFAIL. This is the case with ethtool_rmon and mlxsw_lib. For these, introduce a new helper, log_test_xfail(). Do the same for router_mpath_nh_lib. Note that it will be fixed using a more reusable way in a following patch. For the two resource_scale selftests, the log should simply not be written, because there is no problem. Cc: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by:
-
Petr Machata authored
Since the selftests that are not supposed to run on veth pairs are now in their own dedicated directory, the skip_on_veth logic can go away. Drop it from the selftests, and from lib.sh. Cc: Danielle Ratson <danieller@nvidia.com> Signed-off-by:
-
Petr Machata authored
The tests in net/forwarding are generally expected to be HW-independent. There are however several tests that, while not depending on any HW in particular, nevertheless depend on being used on HW interfaces. Placing these selftests to net/forwarding is confusing, because the selftest will just report it can't be run on veth pairs. At the same time, placing them to a particular driver's selftests subdirectory would be wrong. Instead, add a new directory, drivers/net/hw, where these generic but HW independent selftests should be placed. Move over several such tests including one helper library. Since typically these tests will not be expected to run, omit the directory drivers/net/hw from the TARGETS list in selftests/Makefile. Retain a Makefile in the new directory itself, so that a user can make -C into that directory and act on those tests explicitly. Cc: Roger Quadros <rogerq@kernel.org> Cc: Tobias Waldekranz <tobias@waldekranz.com> Cc: Danielle Ratson <danieller@nvidia.com> Cc: Davide Caratti <dcaratti@redhat.com> Cc: Johannes Nixdorf <jnixdorf-oss@avm.de> Suggested-by:
-
Petr Machata authored
This library is always sourced in the context where lib.sh has already been sourced as well. Therefore drop the explicit sourcing and expect the client to already have done it. This will simplify moving some of the clients to a different directory. Signed-off-by:
-
Petr Machata authored
That any sort of customization is possible at all, let alone how it should be done, is currently not at all clear. Document the whats and hows in README. Signed-off-by:
Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/e819623af6aaeea49e9dc36cecd95694fad73bb8.1711464583.git.petrm@nvidia.comSigned-off-by:
-
Petr Machata authored
forwarding.config.sample, net/lib.sh and net/forwarding/lib.sh contain definitions and redefinitions of some of the same variables. The overlap between net/forwarding/lib.sh and forwarding.config.sample is especially large. This duplication is a potential source of confusion and problems. It would be overall less error prone if each variable were defined in one place only. In this patch set, that place is the library itself. Therefore move all comments from forwarding.config.sample to net/forwarding/lib.sh. Move over also a definition of TC_FLAG, which was missing from lib.sh entirely. Additionally, add to lib.sh a default definition of the topology variables. The logic behind this is that forgetting to specify forwarding.config was a frequent source of frustration for the selftest users. But really, most of the time the default veth based topology is just fine. We considered just sourcing forwarding.config.sample instead if forwarding.config is not available, but this is a cleaner solution. That means the syntax of the forwarding.config.sample override has to change to an array assignment, so that the whole variable is overwritten, not just individual keys, which could leave the value of some keys unchanged. Do the same in lib.sh for any cut'n'pasters out there. The config file is then given a sort of carte blanche to redefine whatever variables it sees fit from the libraries. This is described in a comment in the file. Only a handful of variables are left behind, to illustrate the customization. The fact that the variables are now missing from forwarding.config.sample, and therefore would miss from forwarding.config derived from that file as well, should not change anything. This is just the sample file. Users that keep their own forwarding.config would retain it as before. The only observable change is introduction of TC_FLAG to lib.sh, because now the filters would not be attempted to install to HW datapath. For veth pairs this does not change anything. For HW deployments, users presumably have forwarding.config with this value overridden. Signed-off-by:
-
Petr Machata authored
The current syntax of X=${X:=X} first evaluates the ${X:=Y} expression, which either uses the existing value of $X if there is one, or uses the value of "Y" as a fallback, and assigns it to X. The expression is then replaced with the now-current value of $X. Assigning that value to X once more is meaningless. So avoid the outer X=... bit, and instead express the same idea though the do-nothing ":" built-in as : "${X:=Y}". This also cleans up the block nicely and makes it more readable. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts, or adjacent changes. Signed-off-by:
-
- 28 Mar, 2024 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf, WiFi and netfilter. Current release - regressions: - ipv6: fix address dump when IPv6 is disabled on an interface Current release - new code bugs: - bpf: temporarily disable atomic operations in BPF arena - nexthop: fix uninitialized variable in nla_put_nh_group_stats() Previous releases - regressions: - bpf: protect against int overflow for stack access size - hsr: fix the promiscuous mode in offload mode - wifi: don't always use FW dump trig - tls: adjust recv return with async crypto and failed copy to userspace - tcp: properly terminate timers for kernel sockets - ice: fix memory corruption bug with suspend and rebuild - at803x: fix kernel panic with at8031_probe - qeth: handle deferred cc1 Previous releases - always broken: - bpf: fix bug in BPF_LDX_MEMSX - netfilter: reject table flag and netdev basechain updates - inet_defrag: prevent sk release while still in use - wifi: pick the version of SESSION_PROTECTION_NOTIF - wwan: t7xx: split 64bit accesses to fix alignment issues - mlxbf_gige: call request_irq() after NAPI initialized - hns3: fix kernel crash when devlink reload during pf initialization" * tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits) inet: inet_defrag: prevent sk release while still in use Octeontx2-af: fix pause frame configuration in GMP mode net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips net: bcmasp: Remove phy_{suspend/resume} net: bcmasp: Bring up unimac after PHY link up net: phy: qcom: at803x: fix kernel panic with at8031_probe netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c netfilter: nf_tables: skip netdev hook unregistration if table is dormant netfilter: nf_tables: reject table flag and netdev basechain updates netfilter: nf_tables: reject destroy command to remove basechain hooks bpf: update BPF LSM designated reviewer list bpf: Protect against int overflow for stack access size bpf: Check bloom filter map value size bpf: fix warning for crash_kexec selftests: netdevsim: set test timeout to 10 minutes net: wan: framer: Add missing static inline qualifiers mlxbf_gige: call request_irq() after NAPI initialized tls: get psock ref after taking rxlock to avoid leak selftests: tls: add test with a partially invalid iov tls: adjust recv return with async crypto and failed copy to userspace ... -
Florian Westphal authored
ip_local_out() and other functions can pass skb->sk as function argument. If the skb is a fragment and reassembly happens before such function call returns, the sk must not be released. This affects skb fragments reassembled via netfilter or similar modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline. Eric Dumazet made an initial analysis of this bug. Quoting Eric: Calling ip_defrag() in output path is also implying skb_orphan(), which is buggy because output path relies on sk not disappearing. A relevant old patch about the issue was : 8282f274 ("inet: frag: Always orphan skbs inside ip_defrag()") [..] net/ipv4/ip_output.c depends on skb->sk being set, and probably to an inet socket, not an arbitrary one. If we orphan the packet in ipvlan, then downstream things like FQ packet scheduler will not work properly. We need to change ip_defrag() to only use skb_orphan() when really needed, ie whenever frag_list is going to be used. Eric suggested to stash sk in fragment queue and made an initial patch. However there is a problem with this: If skb is refragmented again right after, ip_do_fragment() will copy head->sk to the new fragments, and sets up destructor to sock_wfree. IOW, we have no choice but to fix up sk_wmem accouting to reflect the fully reassembled skb, else wmem will underflow. This change moves the orphan down into the core, to last possible moment. As ip_defrag_offset is aliased with sk_buff->sk member, we must move the offset into the FRAG_CB, else skb->sk gets clobbered. This allows to delay the orphaning long enough to learn if the skb has to be queued or if the skb is completing the reasm queue. In the former case, things work as before, skb is orphaned. This is safe because skb gets queued/stolen and won't continue past reasm engine. In the latter case, we will steal the skb->sk reference, reattach it to the head skb, and fix up wmem accouting when inet_frag inflates truesize. Fixes: 7026b1dd ("netfilter: Pass socket pointer down through okfn().") Diagnosed-by:
Eric Dumazet <edumazet@google.com> Reported-by:
xingwei lee <xrivendell7@gmail.com> Reported-by:
yue sun <samsun1006219@gmail.com> Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Hariprasad Kelam authored
The Octeontx2 MAC block (CGX) has separate data paths (SMU and GMP) for different speeds, allowing for efficient data transfer. The previous patch which added pause frame configuration has a bug due to which pause frame feature is not working in GMP mode. This patch fixes the issue by configurating appropriate registers. Fixes: f7e086e7 ("octeontx2-af: Pause frame configuration at cgx") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240326052720.4441-1-hkelam@marvell.comSigned-off-by:
-
Raju Lakkaraju authored
PCI11x1x Rev B0 devices might drop packets when receiving back to back frames at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO threshold parameter from its hardware default of 4 to 3 dwords to prevent the problem. Rev C0 and later hardware already defaults to 3 dwords. Fixes: bb4f6bff ("net: lan743x: Add PCI11010 / PCI11414 device IDs") Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Reviewed-by:
-
Paolo Abeni authored
Justin Chen says: ==================== net: bcmasp: phy managements fixes Fix two issues. - The unimac may be put in a bad state if PHY RX clk doesn't exist during reset. Work around this by bringing the unimac out of reset during phy up. - Remove redundant phy_{suspend/resume} ==================== Link: https://lore.kernel.org/r/20240325193025.1540737-1-justin.chen@broadcom.comSigned-off-by: -
Justin Chen authored
phy_{suspend/resume} is redundant. It gets called from phy_{stop/start}. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by:Justin Chen <justin.chen@broadcom.com> Signed-off-by:
-
Justin Chen authored
The unimac requires the PHY RX clk during reset or it may be put into a bad state. Bring up the unimac after link up to ensure the PHY RX clk exists. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by:
-
Christian Marangi authored
On reworking and splitting the at803x driver, in splitting function of at803x PHYs it was added a NULL dereference bug where priv is referenced before it's actually allocated and then is tried to write to for the is_1000basex and is_fiber variables in the case of at8031, writing on the wrong address. Fix this by correctly setting priv local variable only after at803x_probe is called and actually allocates priv in the phydev struct. Reported-by:
William Wortel <wwortel@dorpstraat.com> Cc: <stable@vger.kernel.org> Fixes: 25d2ba94 ("net: phy: at803x: move specific at8031 probe mode check to dedicated probe") Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240325190621.2665-1-ansuelsmth@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 reject destroy chain command to delete device hooks in netdev family, hence, only delchain commands are allowed. Patch #2 reject table flag update interference with netdev basechain hook updates, this can leave hooks in inconsistent registration/unregistration state. Patch #3 do not unregister netdev basechain hooks if table is dormant. Otherwise, splat with double unregistration is possible. Patch #4 fixes Kconfig to allow to restore IP_NF_ARPTABLES, from Kuniyuki Iwashima. There are a more fixes still in progress on my side that need more work. * tag 'nf-24-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c netfilter: nf_tables: skip netdev hook unregistration if table is dormant netfilter: nf_tables: reject table flag and netdev basechain updates netfilter: nf_tables: reject destroy command to remove basechain hooks ==================== Link: https://lore.kernel.org/r/20240328031855.2063-1-pablo@netfilter.orgSigned-off-by: -
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfPaolo Abeni authored
Alexei Starovoitov says: ==================== pull-request: bpf 2024-03-27 The following pull-request contains BPF updates for your *net* tree. We've added 4 non-merge commits during the last 1 day(s) which contain a total of 5 files changed, 26 insertions(+), 3 deletions(-). The main changes are: 1) Fix bloom filter value size validation and protect the verifier against such mistakes, from Andrei. 2) Fix build due to CONFIG_KEXEC_CORE/CRASH_DUMP split, from Hari. 3) Update bpf_lsm maintainers entry, from Matt. * tag 'for-net' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: update BPF LSM designated reviewer list bpf: Protect against int overflow for stack access size bpf: Check bloom filter map value size bpf: fix warning for crash_kexec ==================== Link: https://lore.kernel.org/r/20240328012938.24249-1-alexei.starovoitov@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofsLinus Torvalds authored
Pull erofs fixes from Gao Xiang: - Add a new reviewer Sandeep Dhavale to build a healthier community - Drop experimental warning for FSDAX * tag 'erofs-for-6.9-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: MAINTAINERS: erofs: add myself as reviewer erofs: drop experimental warning for FSDAX
-
Kuniyuki Iwashima authored
syzkaller started to report a warning below [0] after consuming the commit 4654467d ("netfilter: arptables: allow xtables-nft only builds"). The change accidentally removed the dependency on NETFILTER_FAMILY_ARP from IP_NF_ARPTABLES. If NF_TABLES_ARP is not enabled on Kconfig, NETFILTER_FAMILY_ARP will be removed and some code necessary for arptables will not be compiled. $ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config CONFIG_NETFILTER_FAMILY_ARP=y # CONFIG_NF_TABLES_ARP is not set CONFIG_IP_NF_ARPTABLES=y $ make olddefconfig $ grep -E "(NETFILTER_FAMILY_ARP|IP_NF_ARPTABLES|NF_TABLES_ARP)" .config # CONFIG_NF_TABLES_ARP is not set CONFIG_IP_NF_ARPTABLES=y So, when nf_register_net_hooks() is called for arptables, it will trigger the splat below. Now IP_NF_ARPTABLES is only enabled by IP_NF_ARPFILTER, so let's restore the dependency on NETFILTER_FAMILY_ARP in IP_NF_ARPFILTER. [0]: WARNING: CPU: 0 PID: 242 at net/netfilter/core.c:316 nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316 Modules linked in: CPU: 0 PID: 242 Comm: syz-executor.0 Not tainted 6.8.0-12821-g537c2e91 #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:nf_hook_entry_head+0x1e1/0x2c0 net/netfilter/core.c:316 Code: 83 fd 04 0f 87 bc 00 00 00 e8 5b 84 83 fd 4d 8d ac ec a8 0b 00 00 e8 4e 84 83 fd 4c 89 e8 5b 5d 41 5c 41 5d c3 e8 3f 84 83 fd <0f> 0b e8 38 84 83 fd 45 31 ed 5b 5d 4c 89 e8 41 5c 41 5d c3 e8 26 RSP: 0018:ffffc90000b8f6e8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000003 RCX: ffffffff83c42164 RDX: ffff888106851180 RSI: ffffffff83c42321 RDI: 0000000000000005 RBP: 0000000000000000 R08: 0000000000000005 R09: 000000000000000a R10: 0000000000000003 R11: ffff8881055c2f00 R12: ffff888112b78000 R13: 0000000000000000 R14: ffff8881055c2f00 R15: ffff8881055c2f00 FS: 00007f377bd78800(0000) GS:ffff88811b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000496068 CR3: 000000011298b003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> __nf_register_net_hook+0xcd/0x7a0 net/netfilter/core.c:428 nf_register_net_hook+0x116/0x170 net/netfilter/core.c:578 nf_register_net_hooks+0x5d/0xc0 net/netfilter/core.c:594 arpt_register_table+0x250/0x420 net/ipv4/netfilter/arp_tables.c:1553 arptable_filter_table_init+0x41/0x60 net/ipv4/netfilter/arptable_filter.c:39 xt_find_table_lock+0x2e9/0x4b0 net/netfilter/x_tables.c:1260 xt_request_find_table_lock+0x2b/0xe0 net/netfilter/x_tables.c:1285 get_info+0x169/0x5c0 net/ipv4/netfilter/arp_tables.c:808 do_arpt_get_ctl+0x3f9/0x830 net/ipv4/netfilter/arp_tables.c:1444 nf_getsockopt+0x76/0xd0 net/netfilter/nf_sockopt.c:116 ip_getsockopt+0x17d/0x1c0 net/ipv4/ip_sockglue.c:1777 tcp_getsockopt+0x99/0x100 net/ipv4/tcp.c:4373 do_sock_getsockopt+0x279/0x360 net/socket.c:2373 __sys_getsockopt+0x115/0x1e0 net/socket.c:2402 __do_sys_getsockopt net/socket.c:2412 [inline] __se_sys_getsockopt net/socket.c:2409 [inline] __x64_sys_getsockopt+0xbd/0x150 net/socket.c:2409 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x46/0x4e RIP: 0033:0x7f377beca6fe Code: 1f 44 00 00 48 8b 15 01 97 0a 00 f7 d8 64 89 02 b8 ff ff ff ff eb b8 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 37 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 c9 RSP: 002b:00000000005df728 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004966e0 RCX: 00007f377beca6fe RDX: 0000000000000060 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 000000000042938a R08: 00000000005df73c R09: 00000000005df800 R10: 00000000004966e8 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000496068 R14: 0000000000000003 R15: 00000000004bc9d8 </TASK> Fixes: 4654467d ("netfilter: arptables: allow xtables-nft only builds") Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Skip hook unregistration when adding or deleting devices from an existing netdev basechain. Otherwise, commit/abort path try to unregister hooks which not enabled. Fixes: b9703ed4 ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Fixes: 7d937b10 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain") Signed-off-by:
-
Pablo Neira Ayuso authored
netdev basechain updates are stored in the transaction object hook list. When setting on the table dormant flag, it iterates over the existing hooks in the basechain. Thus, skipping the hooks that are being added/deleted in this transaction, which leaves hook registration in inconsistent state. Reject table flag updates in combination with netdev basechain updates in the same batch: - Update table flags and add/delete basechain: Check from basechain update path if there are pending flag updates for this table. - add/delete basechain and update table flags: Iterate over the transaction list to search for basechain updates from the table update path. In both cases, the batch is rejected. Based on suggestion from Florian Westphal. Fixes: b9703ed4 ("netfilter: nf_tables: support for adding new devices to an existing netdev chain") Fixes: 7d937b10 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain") Signed-off-by:
-
Pablo Neira Ayuso authored
Report EOPNOTSUPP if NFT_MSG_DESTROYCHAIN is used to delete hooks in an existing netdev basechain, thus, only NFT_MSG_DELCHAIN is allowed. Fixes: 7d937b10 ("netfilter: nf_tables: support for deleting devices in an existing netdev chain") Signed-off-by:
-
- 27 Mar, 2024 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.9-rc2 The first fixes for v6.9. Ping-Ke Shih now maintains a separate tree for Realtek drivers, document that in the MAINTAINERS. Plenty of fixes for both to stack and iwlwifi. Our kunit tests were working only on um architecture but that's fixed now. * tag 'wireless-2024-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (21 commits) MAINTAINERS: wifi: mwifiex: add Francesco as reviewer kunit: fix wireless test dependencies wifi: iwlwifi: mvm: include link ID when releasing frames wifi: iwlwifi: mvm: handle debugfs names more carefully wifi: iwlwifi: mvm: guard against invalid STA ID on removal wifi: iwlwifi: read txq->read_ptr under lock wifi: iwlwifi: fw: don't always use FW dump trig wifi: iwlwifi: mvm: rfi: fix potential response leaks wifi: mac80211: correctly set active links upon TTLM wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW wifi: iwlwifi: mvm: consider having one active link wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIF wifi: mac80211: fix prep_connection error path wifi: cfg80211: fix rdev_dump_mpp() arguments order wifi: iwlwifi: mvm: disable MLO for the time being wifi: cfg80211: add a flag to disable wireless extensions wifi: mac80211: fix ieee80211_bss_*_flags kernel-doc wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes wifi: mac80211: fix mlme_link_id_dbg() MAINTAINERS: wifi: add git tree for Realtek WiFi drivers ... ==================== Link: https://lore.kernel.org/r/20240327191346.1A1EAC433C7@smtp.kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
Pull 9p fixes from Eric Van Hensbergen: "Two of these fix syzbot reported issues, and the other fixes a unused variable in some configurations" * tag '9p-fixes-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: fix uninitialized values during inode evict fs/9p: remove redundant pointer v9ses fs/9p: fix uaf in in v9fs_stat2inode_dotl
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fix race when reading extent buffer and 'uptodate' status is missed by one thread (introduced in 6.5) - do additional validation of devices using major:minor numbers - zoned mode fixes: - use zone-aware super block access during scrub - fix use-after-free during device replace (found by KASAN) - also delete zones that are 100% unusable to reclaim space - extent unpinning fixes: - fix extent map leak after error handling - print correct range in error message - error code and message updates * tag 'for-6.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix race in read_extent_buffer_pages() btrfs: return accurate error code on open failure in open_fs_devices() btrfs: zoned: don't skip block groups with 100% zone unusable btrfs: use btrfs_warn() to log message at btrfs_add_extent_mapping() btrfs: fix message not properly printing interval when adding extent map btrfs: fix warning messages not printing interval at unpin_extent_range() btrfs: fix extent map leak in unexpected scenario at unpin_extent_cache() btrfs: validate device maj:min during open btrfs: zoned: fix use-after-free in do_zone_finish() btrfs: zoned: use zone aware sb location for scrub -
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Various hotfixes. About half are cc:stable and the remainder address post-6.8 issues or aren't considered suitable for backporting. zswap figures prominently in the post-6.8 issues - folloup against the large amount of changes we have just made to that code. Apart from that, all over the map" * tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) crash: use macro to add crashk_res into iomem early for specific arch mm: zswap: fix data loss on SWP_SYNCHRONOUS_IO devices selftests/mm: fix ARM related issue with fork after pthread_create hexagon: vmlinux.lds.S: handle attributes section userfaultfd: fix deadlock warning when locking src and dst VMAs tmpfs: fix race on handling dquot rbtree selftests/mm: sigbus-wp test requires UFFD_FEATURE_WP_HUGETLBFS_SHMEM mm: zswap: fix writeback shinker GFP_NOIO/GFP_NOFS recursion ARM: prctl: reject PR_SET_MDWE on pre-ARMv6 prctl: generalize PR_SET_MDWE support check to be per-arch MAINTAINERS: remove incorrect M: tag for dm-devel@lists.linux.dev mm: zswap: fix kernel BUG in sg_init_one selftests: mm: restore settings from only parent process tools/Makefile: remove cgroup target mm: cachestat: fix two shmem bugs mm: increase folio batch size mm,page_owner: fix recursion mailmap: update entry for Leonard Crestez init: open /initrd.image with O_LARGEFILE selftests/mm: Fix build with _FORTIFY_SOURCE ...
-
Matt Bobrowski authored
Adding myself in place of both Brendan and Florent as both have since moved on from working on the BPF LSM and will no longer be devoting their time to maintaining the BPF LSM. Signed-off-by:
Matt Bobrowski <mattbobrowski@google.com> Acked-by:
KP Singh <kpsingh@kernel.org> Link: https://lore.kernel.org/r/ZgMhWF_egdYF8t4D@google.comSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixlet from Masami Hiramatsu: - tracing/probes: initialize a 'val' local variable with zero. This variable is read by FETCH_OP_ST_EDATA in a loop, and is initialized by FETCH_OP_ARG in the same loop. Since this initialization is not obvious, smatch warns about it. Explicitly initializing 'val' with zero fixes this warning. * tag 'probes-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: probes: Fix to zero initialize a local variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull execve fixes from Kees Cook: - Fix selftests to conform to the TAP output format (Muhammad Usama Anjum) - Fix NOMMU linux_binprm::exec pointer in auxv (Max Filippov) - Replace deprecated strncpy usage (Justin Stitt) - Replace another /bin/sh instance in selftests * tag 'execve-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: binfmt: replace deprecated strncpy exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack() selftests/exec: Convert remaining /bin/sh to /bin/bash selftests/exec: execveat: Improve debug reporting selftests/exec: recursion-depth: conform test to TAP format output selftests/exec: load_address: conform test to TAP format output selftests/exec: binfmt_script: Add the overall result line according to TAP
-
Alexei Starovoitov authored
Andrei Matei says: ==================== Check bloom filter map value size v1->v2: - prepend a patch addressing the bloom map specifically - change low-level rejection error to EFAULT, to indicate a bug ==================== Link: https://lore.kernel.org/r/20240327024245.318299-1-andreimatei1@gmail.comSigned-off-by:
-
