Fix indentation of a type attribute of IPV6_VTI config entry.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Retire some of my email addresses from Kernel activities.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
1) Fix a slab-out-of-bounds read in xfrm_address_filter.
   From Lin Ma.

2) Fix the pfkey sadb_x_filter validation.
   From Lin Ma.

3) Use the correct nla_policy structure for XFRMA_SEC_CTX.
   From Lin Ma.

4) Fix warnings triggerable by bad packets in the encap functions.
   From Herbert Xu.

5) Fix some slab-use-after-free in decode_session6.
   From Zhengchao Shao.

6) Fix a possible NULL piointer dereference in xfrm_update_ae_params.
   Lin Ma.

7) Add a forgotten nla_policy for XFRMA_MTIMER_THRESH.
   From Lin Ma.

8) Don't leak offloaded policies.
   From Leon Romanovsky.

9) Delete also the offloading part of an acquire state.
   From Leon Romanovsky.

Please pull or let me know if there are problems.

Return result of b44_writephy() instead of zero to
deal with possible error.

Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recent changes in net-next (commit 759ab1ed ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:

$ ./cli.py --spec netlink/specs/ovs_datapath.yaml \
         --do new \
	 --json '{"upcall-pid": 1, "name":"my-dp"}'
$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
	 --do new \
	 --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'

$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...

Validate the inputs. Now the second command correctly returns:

$ ./cli.py --spec netlink/specs/ovs_vport.yaml \
	 --do new \
	 --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}'

lib.ynl.NlError: Netlink error: Numerical result out of range
nl_len = 108 (92) nl_flags = 0x300 nl_type = 2
	error: -34	extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'}

Accept 0 since it used to be silently ignored.

Fixes: 54c4ef34 ("openvswitch: allow specifying ifindex of new interfaces")
Reported-by: syzbot+7456b5dcf65111553320@syzkaller.appspotmail.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230814203840.2908710-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to commit 01f4fd27 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:

  # ip netns add ns1
  # ip netns exec ns1 ip link add team1 type team
  # ip netns exec ns1 ip link add team_slave type veth peer veth2
  # ip netns exec ns1 ip link set team_slave master team1
  # ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link set team_slave nomaster
  # ip netns del ns1

Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.

Fixes: 8ad227ff ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.

Fixes: b14995ac ("net: phy: broadcom: Add BCM54810 PHY entry")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/1691901708-28650-1-git-send-email-justin.chen@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.

The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:

icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX);

Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0

Therefore, the timer expires so quickly without any doubt.

I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.

Fixes: 36e31b0a ("net: TCP thin linear timeouts")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The failure handling procedure destroys page pools for all queues,
including those that haven't had their page pool created yet. this patch
introduces necessary adjustments to prevent potential risks and
inconsistency with the error handling behavior.

Fixes: 0ebab78c ("net: veth: add page_pool for page recycling")
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Link: https://lore.kernel.org/r/20230812023016.10553-1-liangchen.linux@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michal Schmidt says:

====================
octeon_ep: fixes for error and remove paths

I have an Octeon card that's misconfigured in a way that exposes a
couple of bugs in the octeon_ep driver's error paths. It can reproduce
the issues that patches 1 & 4 are fixing. Patches 2 & 3 are a result of
reviewing the nearby code.
====================

Link: https://lore.kernel.org/r/20230810150114.107765-1-mschmidt@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.

Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.

Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task.

Fixes: 24d43332 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

intr_poll_task may queue ctrl_mbox_task. The function
octep_poll_non_ioq_interrupts_cn93_pf does this.

When removing the driver and canceling these two works, cancel
ctrl_mbox_task last to guarantee it does not run anymore.

Fixes: 24d43332 ("octeon_ep: poll for control messages")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-4-mschmidt@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tx_timeout_task is canceled too early when removing the driver. Nothing
prevents .ndo_tx_timeout from triggering and queuing the work again.

Better cancel it after the netdev is unregistered.
It's harmless for octep_tx_timeout_task to run in the window between the
unregistration and cancelation, because it checks netif_running.

Fixes: 862cd659 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The intention was to wait up to 500 ms for the mbox response.
The third argument to wait_event_interruptible_timeout() is supposed to
be the timeout duration. The driver mistakenly passed absolute time
instead.

Fixes: 577f0d1b ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.

This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.

$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend  <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110

macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
   reset MACB IP and disables PHY and network interface.

2. macb_suspend: It is called in kernel suspend flow. But because
   network interface has been disabled(netif_running(ndev) is
   false), it does nothing and returns directly;

3. System goes into suspend state. Some time later, system is
   waken up by RTC wakeup device;

4. macb_resume: It does nothing because network interface has
   been disabled;

5. macb_open: It is called to enable network interface again. ethernet
   interface is initialized in this API but serdes which is power-off
   by PMUFW during FPD-off suspend is not initialized again and so
   we hit GT PLL lock issue on open.

To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.

Fixes: f22bd29b ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3a ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This test verifies whether the encapsulated packets have the correct
configured TTL. It does so by sending ICMP packets through the test
topology and mirroring them to a gretap netdevice. On a busy host
however, more than just the test ICMP packets may end up flowing
through the topology, get mirrored, and counted. This leads to
potential spurious failures as the test observes much more mirrored
packets than the sent test packets, and assumes a bug.

Fix this by tightening up the mirror action match. Change it from
matchall to a flower classifier matching on ICMP packets specifically.

Fixes: 45315673 ("selftests: forwarding: Test changes in mirror-to-gretap")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 718cb09a.

The commit triggers multiple syzbot issues, probably due to possibility of
manually creating VLAN 0 on netdevice which will cause the code to delete
it since it can't distinguish such VLAN from implicit VLAN 0 automatically
created for devices with NETIF_F_HW_VLAN_CTAG_FILTER feature.

Reported-by: syzbot+662f783a5cdf3add2719@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000090196d0602a6167d@google.com/
Reported-by: syzbot+4b4f06495414e92701d5@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000096ae870602a61602@google.com/
Reported-by: syzbot+d810d3cd45ed1848c3f7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/0000000000009f0f9c0602a616ce@google.com/
Fixes: 718cb09a ("vlan: Fix VLAN 0 memory leak")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Uwe reports:
"Most PHYs signal WoL using an interrupt. So disabling interrupts [at
shutdown] breaks WoL at least on PHYs covered by the marvell driver."

Discussing with Ioana, the problem which was trying to be solved was:
"The board in question is a LS1021ATSN which has two AR8031 PHYs that
share an interrupt line. In case only one of the PHYs is probed and
there are pending interrupts on the PHY#2 an IRQ storm will happen
since there is no entity to clear the interrupt from PHY#2's registers.
PHY#1's driver will get stuck in .handle_interrupt() indefinitely."

Further confirmation that "the two AR8031 PHYs are on the same MDIO
bus."

With WoL using interrupts to wake the system, in such a case, the
system will begin booting with an asserted interrupt. Thus, we need to
cope with an interrupt asserted during boot.

Solve this instead by disabling interrupts during PHY probe. This will
ensure in Ioana's situation that both PHYs of the same type sharing an
interrupt line on a common MDIO bus will have their interrupt outputs
disabled when the driver probes the device, but before we hook in any
interrupt handlers - thus avoiding the interrupt storm.

A better fix would be for platform firmware to disable the interrupting
devices at source during boot, before control is handed to the kernel.

Fixes: e2f016cf ("net: phy: add a shutdown procedure")
Link: 20230804071757.383971-1-u.kleine-koenig@pengutronix.de
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reference of pdev->dev is taken by of_find_device_by_node, so
it should be released when not need anymore.

Fixes: 7dc54d3b ("net: pcs: add Renesas MII converter driver")
Signed-off-by: Xiang Yang <xiangyang3@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 25266128 ("virtio-net: fix race between set queues and
probe") tries to fix the race between set queues and probe by calling
_virtnet_set_queues() before DRIVER_OK is set. This violates virtio
spec. Fixing this by setting queues after virtio_device_ready().

Note that rtnl needs to be held for userspace requests to change the
number of queues. So we are serialized in this way.

Fixes: 25266128 ("virtio-net: fix race between set queues and probe")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Cross merge x86 fixes to fix clang linking errors:

ld.lld: error: ./arch/x86/kernel/vmlinux.lds:221: at least one side of the expression must be absolute

These will hopefully be downstream by the time we ship
the next batch of fixes.

* 'x86/bugs' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Move gds_ucode_mitigated() declaration to header
  x86/speculation: Add cpu_show_gds() prototype
  driver core: cpu: Make cpu_show_not_affected() static
  x86/srso: Fix build breakage with the LLVM linker
  Documentation/srso: Document IBPB aspect and fix formatting
  driver core: cpu: Unify redundant silly stubs
  Documentation/hw-vuln: Unify filename specification in index

Link: https://lore.kernel.org/all/CAHk-=wj_b+FGTnevQSBAtCWuhCk=0oQ_THvthBW2hzqpOTLFmg@mail.gmail.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter, wireless and bpf.

  Still trending up in size but the good news is that the "current"
  regressions are resolved, AFAIK.

  We're getting weirdly many fixes for Wake-on-LAN and suspend/resume
  handling on embedded this week (most not merged yet), not sure why.
  But those are all for older bugs.

  Current release - regressions:

   - tls: set MSG_SPLICE_PAGES consistently when handing encrypted data
     over to TCP

  Current release - new code bugs:

   - eth: mlx5: correct IDs on VFs internal to the device (IPU)

  Previous releases - regressions:

   - phy: at803x: fix WoL support / reporting on AR8032

   - bonding: fix incorrect deletion of ETH_P_8021AD protocol VID from
     slaves, leading to BUG_ON()

   - tun: prevent tun_build_skb() from exceeding the packet size limit

   - wifi: rtw89: fix 8852AE disconnection caused by RX full flags

   - eth/PCI: enetc: fix probing after 6fffbc7a ("PCI: Honor
     firmware's device disabled status"), keep PCI devices around even
     if they are disabled / not going to be probed to be able to apply
     quirks on them

   - eth: prestera: fix handling IPv4 routes with nexthop IDs

  Previous releases - always broken:

   - netfilter: re-work garbage collection to avoid races between
     user-facing API and timeouts

   - tunnels: fix generating ipv4 PMTU error on non-linear skbs

   - nexthop: fix infinite nexthop bucket dump when using maximum
     nexthop ID

   - wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()

  Misc:

   - unix: use consistent error code in SO_PEERPIDFD

   - ipv6: adjust ndisc_is_useropt() to include PREFIX_INFO, in prep for
     upcoming IETF RFC"

* tag 'net-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
  net: hns3: fix strscpy causing content truncation issue
  net: tls: set MSG_SPLICE_PAGES consistently
  ibmvnic: Ensure login failure recovery is safe from other resets
  ibmvnic: Do partial reset on login failure
  ibmvnic: Handle DMA unmapping of login buffs in release functions
  ibmvnic: Unmap DMA login rsp buffer on send login fail
  ibmvnic: Enforce stronger sanity checks on login response
  net: mana: Fix MANA VF unload when hardware is unresponsive
  netfilter: nf_tables: remove busy mark and gc batch API
  netfilter: nft_set_hash: mark set element as dead when deleting from packet path
  netfilter: nf_tables: adapt set backend to use GC transaction API
  netfilter: nf_tables: GC transaction API to avoid race with control plane
  selftests/bpf: Add sockmap test for redirecting partial skb data
  selftests/bpf: fix a CI failure caused by vsock sockmap test
  bpf, sockmap: Fix bug that strp_done cannot be called
  bpf, sockmap: Fix map type error in sock_map_del_link
  xsk: fix refcount underflow in error path
  ipv6: adjust ndisc_is_useropt() to also return true for PIO
  selftests: forwarding: bridge_mdb: Make test more robust
  selftests: forwarding: bridge_mdb_max: Fix failing test with old libnet
  ...

hns3_dbg_fill_content()/hclge_dbg_fill_content() is aim to integrate some
items to a string for content, and we add '\n' and '\0' in the last
two bytes of content.

strscpy() will add '\0' in the last byte of destination buffer(one of
items), it result in finishing content print ahead of schedule and some
dump content truncation.

One Error log shows as below:
cat mac_list/uc
UC MAC_LIST:

Expected:
UC MAC_LIST:
FUNC_ID  MAC_ADDR            STATE
pf       00:2b:19:05:03:00   ACTIVE

The destination buffer is length-bounded and not required to be
NUL-terminated, so just change strscpy() to memcpy() to fix it.

Fixes: 1cf3d556 ("net: hns3: fix strncpy() not using dest-buf length as length issue")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://lore.kernel.org/r/20230809020902.1941471-1-shaojijie@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We used to change the flags for the last segment, because
non-last segments had the MSG_SENDPAGE_NOTLAST flag set.
That flag is no longer a thing so remove the setting.

Since flags most likely don't have MSG_SPLICE_PAGES set
this avoids passing parts of the sg as splice and parts
as non-splice. Before commit under Fixes we'd have called
tcp_sendpage() which would add the MSG_SPLICE_PAGES.

Why this leads to trouble remains unclear but Tariq
reports hitting the WARN_ON(!sendpage_ok()) due to
page refcount of 0.

Fixes: e117dcfd ("tls: Inline do_tcp_sendpages()")
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/all/4c49176f-147a-4283-f1b1-32aac7b4b996@gmail.com/Tested-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20230808180917.1243540-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull dmaengine fixes from Vinod Koul:

 - HAS_IOMEM fixes for fsl edma and intel idma

 - return-value fix, interrupt vector setting and typo fix for xilinx
   xdma

 - email updates for codeaurora email domain move

 - correct pause status for pl330 driver

 - idxd clear flag on disable fix

 - function documentation fix for owl dma

 - potential un-allocated memory fix for mcf driver

* tag 'dmaengine-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: xilinx: xdma: Fix typo
  dmaengine: xilinx: xdma: Fix interrupt vector setting
  dmaengine: owl-dma: Modify mismatched function name
  dmaengine: idxd: Clear PRS disable flag when disabling IDXD device
  dmaengine: pl330: Return DMA_PAUSED when transaction is paused
  dmaengine: qcom_hidma: Update codeaurora email domain
  dmaengine: mcf-edma: Fix a potential un-allocated memory access
  dmaengine: xilinx: xdma: Fix Judgment of the return value
  idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The existing attempt to resolve races between control plane and GC work
is error prone, as reported by Bien Pham <phamnnb@sea.com>, some places
forgot to call nft_set_elem_mark_busy(), leading to double-deactivation
of elements.

This series contains the following patches:

1) Do not skip expired elements during walk otherwise elements might
   never decrement the reference counter on data, leading to memleak.

2) Add a GC transaction API to replace the former attempt to deal with
   races between control plane and GC. GC worker sets on NFT_SET_ELEM_DEAD_BIT
   on elements and it creates a GC transaction to remove the expired
   elements, GC transaction could abort in case of interference with
   control plane and retried later (GC async). Set backends such as
   rbtree and pipapo also perform GC from control plane (GC sync), in
   such case, element deactivation and removal is safe because mutex
   is held then collected elements are released via call_rcu().

3) Adapt existing set backends to use the GC transaction API.

4) Update rhash set backend to set on _DEAD bit to report deleted
   elements from datapath for GC.

5) Remove old GC batch API and the NFT_SET_ELEM_BUSY_BIT.

* tag 'nf-23-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: remove busy mark and gc batch API
  netfilter: nft_set_hash: mark set element as dead when deleting from packet path
  netfilter: nf_tables: adapt set backend to use GC transaction API
  netfilter: nf_tables: GC transaction API to avoid race with control plane
  netfilter: nf_tables: don't skip expired elements during walk
====================

Link: https://lore.kernel.org/r/20230810070830.24064-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Martin KaFai Lau says:

====================
pull-request: bpf 2023-08-09

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 6 files changed, 102 insertions(+), 8 deletions(-).

The main changes are:

1) A bpf sockmap memleak fix and a fix in accessing the programs of
   a sockmap under the incorrect map type from Xu Kuohai.

2) A refcount underflow fix in xsk from Magnus Karlsson.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add sockmap test for redirecting partial skb data
  selftests/bpf: fix a CI failure caused by vsock sockmap test
  bpf, sockmap: Fix bug that strp_done cannot be called
  bpf, sockmap: Fix map type error in sock_map_del_link
  xsk: fix refcount underflow in error path
====================

Link: https://lore.kernel.org/r/20230810055303.120917-1-martin.lau@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If a login request fails, the recovery process should be protected
against parallel resets. It is a known issue that freeing and
registering CRQ's in quick succession can result in a failover CRQ from
the VIOS. Processing a failover during login recovery is dangerous for
two reasons:
 1. This will result in two parallel initialization processes, this can
 cause serious issues during login.
 2. It is possible that the failover CRQ is received but never executed.
 We get notified of a pending failover through a transport event CRQ.
 The reset is not performed until a INIT CRQ request is received.
 Previously, if CRQ init fails during login recovery, then the ibmvnic
 irq is freed and the login process returned error. If failover_pending
 is true (a transport event was received), then the ibmvnic device
 would never be able to process the reset since it cannot receive the
 CRQ_INIT request due to the irq being freed. This leaved the device
 in a inoperable state.

Therefore, the login failure recovery process must be hardened against
these possible issues. Possible failovers (due to quick CRQ free and
init) must be avoided and any issues during re-initialization should be
dealt with instead of being propagated up the stack. This logic is
similar to that of ibmvnic_probe().

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-5-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Perform a partial reset before sending a login request if any of the
following are true:
 1. If a previous request times out. This can be dangerous because the
 	VIOS could still receive the old login request at any point after
 	the timeout. Therefore, it is best to re-register the CRQ's  and
 	sub-CRQ's before retrying.
 2. If the previous request returns an error that is not described in
 	PAPR. PAPR provides procedures if the login returns with partial
 	success or aborted return codes (section L.5.1) but other values
	do not have a defined procedure. Previously, these conditions
	just returned error from the login function rather than trying
	to resolve the issue.
 	This can cause further issues since most callers of the login
 	function are not prepared to handle an error when logging in. This
 	improper cleanup can lead to the device being permanently DOWN'd.
 	For example, if the VIOS believes that the device is already logged
 	in then it will return INVALID_STATE (-7). If we never re-register
 	CRQ's then it will always think that the device is already logged
 	in. This leaves the device inoperable.

The partial reset involves freeing the sub-CRQs, freeing the CRQ then
registering and initializing a new CRQ and sub-CRQs. This essentially
restarts all communication with VIOS to allow for a fresh login attempt
that will be unhindered by any previous failed attempts.

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-4-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than leaving the DMA unmapping of the login buffers to the
login response handler, move this work into the login release functions.
Previously, these functions were only used for freeing the allocated
buffers. This could lead to issues if there are more than one
outstanding login buffer requests, which is possible if a login request
times out.

If a login request times out, then there is another call to send login.
The send login function makes a call to the login buffer release
function. In the past, this freed the buffers but did not DMA unmap.
Therefore, the VIOS could still write to the old login (now freed)
buffer. It is for this reason that it is a good idea to leave the DMA
unmap call to the login buffers release function.

Since the login buffer release functions now handle DMA unmapping,
remove the duplicate DMA unmapping in handle_login_rsp().

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-3-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If the LOGIN CRQ fails to send then we must DMA unmap the response
buffer. Previously, if the CRQ failed then the memory was freed without
DMA unmapping.

Fixes: c98d9cc4 ("ibmvnic: send_login should check for crq errors")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-2-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ensure that all offsets in a login response buffer are within the size
of the allocated response buffer. Any offsets or lengths that surpass
the allocation are likely the result of an incomplete response buffer.
In these cases, a full reset is necessary.

When attempting to login, the ibmvnic device will allocate a response
buffer and pass a reference to the VIOS. The VIOS will then send the
ibmvnic device a LOGIN_RSP CRQ to signal that the buffer has been filled
with data. If the ibmvnic device does not get a response in 20 seconds,
the old buffer is freed and a new login request is sent. With 2
outstanding requests, any LOGIN_RSP CRQ's could be for the older
login request. If this is the case then the login response buffer (which
is for the newer login request) could be incomplete and contain invalid
data. Therefore, we must enforce strict sanity checks on the response
buffer values.

Testing has shown that the `off_rxadd_buff_size` value is filled in last
by the VIOS and will be the smoking gun for these circumstances.

Until VIOS can implement a mechanism for tracking outstanding response
buffers and a method for mapping a LOGIN_RSP CRQ to a particular login
response buffer, the best ibmvnic can do in this situation is perform a
full reset.

Fixes: dff515a3 ("ibmvnic: Harden device login requests")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230809221038.51296-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When unloading the MANA driver, mana_dealloc_queues() waits for the MANA
hardware to complete any inflight packets and set the pending send count
to zero. But if the hardware has failed, mana_dealloc_queues()
could wait forever.

Fix this by adding a timeout to the wait. Set the timeout to 120 seconds,
which is a somewhat arbitrary value that is more than long enough for
functional hardware to complete any sends.

Cc: stable@vger.kernel.org
Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/1691576525-24271-1-git-send-email-schakrabarti@linux.microsoft.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The declaration got placed in the .c file of the caller, but that
causes a warning for the definition:

arch/x86/kernel/cpu/bugs.c:682:6: error: no previous prototype for 'gds_ucode_mitigated' [-Werror=missing-prototypes]

Move it to a header where both sides can observe it instead.

Fixes: 81ac7e5d ("KVM: Add GDS_NO support to KVM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-2-arnd%40kernel.org

The newly added function has two definitions but no prototypes:

drivers/base/cpu.c:605:16: error: no previous prototype for 'cpu_show_gds' [-Werror=missing-prototypes]

Add a declaration next to the other ones for this file to avoid the
warning.

Fixes: 8974eb58 ("x86/speculation: Add Gather Data Sampling mitigation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/all/20230809130530.1913368-1-arnd%40kernel.org

Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.

Fixes: 0fddfe33 ("driver core: cpu: Unify redundant silly stubs")
Closes: https://lore.kernel.org/oe-kbuild-all/202308101956.oRj1ls7s-lkp@intel.comReported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202308101956.oRj1ls7s-lkp@intel.com

The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:

  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
  the expression must be absolute
  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
  the expression must be absolute

Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.

Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.

Fixes: fb3bd914 ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Daniel Kolesa <daniel@octaforge.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Sven Volkinsfeld <thyrc@gmx.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/20230809-gds-v1-1-eaac90b0cbcc@google.com

Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.

Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-4-bp@alien8.de

Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.

No functional changes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20230809102700.29449-3-bp@alien8.de

Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.

No functional changes.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230809102700.29449-2-bp@alien8.de