- 13 Jul, 2015 2 commits
-
-
Jarkko Sakkinen authored
At least some versions of AMI BIOS have corrupted contents in the TPM2 ACPI table and namely the physical address of the control area is set to zero. This patch changes the driver to fail gracefully when we observe a zero address instead of continuing to ioremap. Cc: <stable@vger.kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
-
Jason Gunthorpe authored
When a cdev is contained in a dynamic structure the cdev parent kobj should be set to the kobj that controls the lifetime of the enclosing structure. In TPM's case this is the embedded struct device. Also, cdev_init 0's the whole structure, so all sets must be after, not before. This fixes module ref counting and cdev. Cc: <stable@vger.kernel.org> Fixes: 313d21ee ("tpm: device class for tpm") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
-
- 18 Jun, 2015 1 commit
-
-
James Morris authored
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next
-
- 16 Jun, 2015 7 commits
-
-
Jarkko Sakkinen authored
le64_to_cpu() was applied twice to the physical addresses read from the control area. This hasn't shown any visible regressions because CRB driver has been tested only on the little endian platofrms so far. Reported-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: <stable@vger.kernel.org> Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
-
Hon Ching \(Vicky\) Lo authored
tpm_ibmvtpm_probe() calls ibmvtpm_reset_crq(ibmvtpm) without having yet set the virtual device in the ibmvtpm structure. So in ibmvtpm_reset_crq, the phype call contains empty unit addresses, ibmvtpm->vdev->unit_address. Signed-off-by: Hon Ching(Vicky) Lo <honclo@linux.vnet.ibm.com> Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by: Ashley Lai <ashley@ahsleylai.com> Cc: <stable@vger.kernel.org> Fixes: 132f7629 ("drivers/char/tpm: Add new device driver to support IBM vTPM") Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
-
Fabian Frederick authored
KERN_ERR is implicitely declared in pr_err() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
-
Mimi Zohar authored
This patch defines a builtin measurement policy "tcb", similar to the existing "ima_tcb", but with additional rules to also measure files based on the effective uid and to measure files opened with the "read" mode bit set (eg. read, read-write). Changing the builtin "ima_tcb" policy could potentially break existing users. Instead of defining a new separate boot command line option each time the builtin measurement policy is modified, this patch defines a single generic boot command line option "ima_policy=" to specify the builtin policy and deprecates the use of the builtin ima_tcb policy. [The "ima_policy=" boot command line option is based on Roberto Sassu's "ima: added new policy type exec" patch.] Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Dr. Greg Wettstein <gw@idfusion.org> Cc: stable@vger.kernel.org
-
Mimi Zohar authored
The current "mask" policy option matches files opened as MAY_READ, MAY_WRITE, MAY_APPEND or MAY_EXEC. This patch extends the "mask" option to match files opened containing one of these modes. For example, "mask=^MAY_READ" would match files opened read-write. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Dr. Greg Wettstein <gw@idfusion.org> Cc: stable@vger.kernel.org
-
Mimi Zohar authored
The new "euid" policy condition measures files with the specified effective uid (euid). In addition, for CAP_SETUID files it measures files with the specified uid or suid. Changelog: - fixed checkpatch.pl warnings - fixed avc denied {setuid} messages - based on Roberto's feedback Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Dr. Greg Wettstein <gw@idfusion.org> Cc: stable@vger.kernel.org
-
Mimi Zohar authored
This patch fixes a bug introduced in "4d7aeee ima: define new template ima-ng and template fields d-ng and n-ng". Changelog: - change int to uint32 (Roberto Sassu's suggestion) Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: Roberto Sassu <rsassu@suse.de> Cc: stable@vger.kernel.org # 3.13
-
- 12 Jun, 2015 2 commits
-
-
-
Dan Carpenter authored
This code used to rely on the fact that kfree(NULL) was a no-op, but then we changed smk_parse_smack() to return error pointers on failure instead of NULL. Calling kfree() on an error pointer will oops. I have re-arranged things a bit so that we only free things if they have been allocated. Fixes: e774ad68 ('smack: pass error code through pointers') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-
- 05 Jun, 2015 1 commit
-
-
J. Bruce Fields authored
Before calling into the filesystem, vfs_setxattr calls security_inode_setxattr, which ends up calling selinux_inode_setxattr in our case. That returns -EOPNOTSUPP whenever SBLABEL_MNT is not set. SBLABEL_MNT was supposed to be set by sb_finish_set_opts, which sets it only if selinux_is_sblabel_mnt returns true. The selinux_is_sblabel_mnt logic was broken by eadcabc6 "SELinux: do all flags twiddling in one place", which didn't take into the account the SECURITY_FS_USE_NATIVE behavior that had been introduced for nfs with eb9ae686 "SELinux: Add new labeling type native labels". This caused setxattr's of security labels over NFSv4.2 to fail. Cc: stable@kernel.org # 3.13 Cc: Eric Paris <eparis@redhat.com> Cc: David Quigley <dpquigl@davequigley.com> Reported-by: Richard Chan <rc556677@outlook.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: added the stable dependency] Signed-off-by: Paul Moore <pmoore@redhat.com>
-
- 04 Jun, 2015 6 commits
-
-
Stephen Smalley authored
Remove unused permission definitions from SELinux. Many of these were only ever used in pre-mainline versions of SELinux, prior to Linux 2.6.0. Some of them were used in the legacy network or compat_net=1 checks that were disabled by default in Linux 2.6.18 and fully removed in Linux 2.6.30. Permissions never used in mainline Linux: file swapon filesystem transition tcp_socket { connectto newconn acceptfrom } node enforce_dest unix_stream_socket { newconn acceptfrom } Legacy network checks, removed in 2.6.30: socket { recv_msg send_msg } node { tcp_recv tcp_send udp_recv udp_send rawip_recv rawip_send dccp_recv dccp_send } netif { tcp_recv tcp_send udp_recv udp_send rawip_recv rawip_send dccp_recv dccp_send } Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
Stephen Smalley authored
Support per-file labeling of sysfs and pstore files based on genfscon policy entries. This is safe because the sysfs and pstore directory tree cannot be manipulated by userspace, except to unlink pstore entries. This provides an alternative method of assigning per-file labeling to sysfs or pstore files without needing to set the labels from userspace on each boot. The advantages of this approach are that the labels are assigned as soon as the dentry is first instantiated and userspace does not need to walk the sysfs or pstore tree and set the labels on each boot. The limitations of this approach are that the labels can only be assigned based on pathname prefix matching. You can initially assign labels using this mechanism and then change them at runtime via setxattr if allowed to do so by policy. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Suggested-by: Dominick Grift <dac.override@gmail.com> Acked-by: Jeff Vander Stoep <jeffv@google.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
Stephen Smalley authored
Add support for per-file labeling of debugfs files so that we can distinguish them in policy. This is particularly important in Android where certain debugfs files have to be writable by apps and therefore the debugfs directory tree can be read and searched by all. Since debugfs is entirely kernel-generated, the directory tree is immutable by userspace, and the inodes are pinned in memory, we can simply use the same approach as with proc and label the inodes from policy based on pathname from the root of the debugfs filesystem. Generalize the existing labeling support used for proc and reuse it for debugfs too. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
Stephen Smalley authored
Update the set of SELinux netlink socket class definitions to match the set of netlink protocols implemented by the kernel. The ip_queue implementation for the NETLINK_FIREWALL and NETLINK_IP6_FW protocols was removed in d16cf20e, so we can remove the corresponding class definitions as this is dead code. Add new classes for NETLINK_ISCSI, NETLINK_FIB_LOOKUP, NETLINK_CONNECTOR, NETLINK_NETFILTER, NETLINK_GENERIC, NETLINK_SCSITRANSPORT, NETLINK_RDMA, and NETLINK_CRYPTO so that we can distinguish among sockets created for each of these protocols. This change does not define the finer-grained nlsmsg_read/write permissions or map specific nlmsg_type values to those permissions in the SELinux nlmsgtab; if finer-grained control of these sockets is desired/required, that can be added as a follow-on change. We do not define a SELinux class for NETLINK_ECRYPTFS as the implementation was removed in 624ae528. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
Oleg Nesterov authored
selinux_bprm_committed_creds()->__flush_signals() is not right, we shouldn't clear TIF_SIGPENDING unconditionally. There can be other reasons for signal_pending(): freezing(), JOBCTL_PENDING_MASK, and potentially more. Also change this code to check fatal_signal_pending() rather than SIGNAL_GROUP_EXIT, it looks a bit better. Now we can kill __flush_signals() before it finds another buggy user. Note: this code looks racy, we can flush a signal which was sent after the task SID has been updated. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
-
Marek Milkovic authored
This prints the 'sclass' field as string instead of index in unrecognized netlink message. The textual representation makes it easier to distinguish the right class. Signed-off-by: Marek Milkovic <mmilkovi@redhat.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> [PM: 80-char width fixes] Signed-off-by: Paul Moore <pmoore@redhat.com>
-
- 03 Jun, 2015 1 commit
-
-
- 02 Jun, 2015 2 commits
-
-
Rafal Krypa authored
Smack onlycap allows limiting of CAP_MAC_ADMIN and CAP_MAC_OVERRIDE to processes running with the configured label. But having single privileged label is not enough in some real use cases. On a complex system like Tizen, there maybe few programs that need to configure Smack policy in run-time and running them all with a single label is not always practical. This patch extends onlycap feature for multiple labels. They are configured in the same smackfs "onlycap" interface, separated by spaces. Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
-
Rafal Krypa authored
Use proper RCU functions and read locking in smackfs seq_operations. Smack gets away with not using proper RCU functions in smackfs, because it never removes entries from these lists. But now one list will be needed (with interface in smackfs) that will have both elements added and removed to it. This change will also help any future changes implementing removal of unneeded entries from other Smack lists. The patch also fixes handling of pos argument in smk_seq_start and smk_seq_next. This fixes a bug in case when smackfs is read with a small buffer: Kernel panic - not syncing: Kernel mode fault at addr 0xfa0000011b CPU: 0 PID: 1292 Comm: dd Not tainted 4.1.0-rc1-00012-g98179b8 #13 Stack: 00000003 0000000d 7ff39e48 7f69fd00 7ff39ce0 601ae4b0 7ff39d50 600e587b 00000010 6039f690 7f69fd40 00612003 Call Trace: [<601ae4b0>] load2_seq_show+0x19/0x1d [<600e587b>] seq_read+0x168/0x331 [<600c5943>] __vfs_read+0x21/0x101 [<601a595e>] ? security_file_permission+0xf8/0x105 [<600c5ec6>] ? rw_verify_area+0x86/0xe2 [<600c5fc3>] vfs_read+0xa1/0x14c [<600c68e2>] SyS_read+0x57/0xa0 [<6001da60>] handle_syscall+0x60/0x80 [<6003087d>] userspace+0x442/0x548 [<6001aa77>] ? interrupt_end+0x0/0x80 [<6001daae>] ? copy_chunk_to_user+0x0/0x2b [<6002cb6b>] ? save_registers+0x1f/0x39 [<60032ef7>] ? arch_prctl+0xf5/0x170 [<6001a92d>] fork_handler+0x85/0x87 Signed-off-by: Rafal Krypa <r.krypa@samsung.com>
-
- 21 May, 2015 10 commits
-
-
Roberto Sassu authored
This patch adds the iint associated to the current inode as a new parameter of ima_add_violation(). The passed iint is always not NULL if a violation is detected. This modification will be used to determine the inode for which there is a violation. Since the 'd' and 'd-ng' template field init() functions were detecting a violation from the value of the iint pointer, they now check the new field 'violation', added to the 'ima_event_data' structure. Changelog: - v1: - modified an old comment (Roberto Sassu) Signed-off-by: Roberto Sassu <rsassu@suse.de> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Roberto Sassu authored
All event related data has been wrapped into the new 'ima_event_data' structure. The main benefit of this patch is that a new information can be made available to template fields initialization functions by simply adding a new field to the new structure instead of modifying the definition of those functions. Changelog: - v2: - f_dentry replaced with f_path.dentry (Roberto Sassu) - removed declaration of temporary variables in template field functions when possible (suggested by Dmitry Kasatkin) Signed-off-by: Roberto Sassu <rsassu@suse.de> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
This patch adds validity checks for 'path' parameter and makes it const. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Mimi Zohar authored
The call to asymmetric_key_hex_to_key_id() from ca_keys_setup() silently fails with -ENOMEM. Instead of dynamically allocating memory from a __setup function, this patch defines a variable and calls __asymmetric_key_hex_to_key_id(), a new helper function, directly. This bug was introduced by 'commit 46963b77 ("KEYS: Overhaul key identification when searching for asymmetric keys")'. Changelog: - for clarification, rename hexlen to asciihexlen in asymmetric_key_hex_to_key_id() - add size argument to __asymmetric_key_hex_to_key_id() - David Howells - inline __asymmetric_key_hex_to_key_id() - David Howells - remove duplicate strlen() calls Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 3.18
-
Dmitry Kasatkin authored
EVM needs to be atomically updated when removing xattrs. Otherwise concurrent EVM verification may fail in between. This patch fixes by moving i_mutex unlocking after calling EVM hook. fsnotify_xattr() is also now called while locked the same way as it is done in __vfs_setxattr_noperm. Changelog: - remove unused 'inode' variable. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Mimi Zohar authored
To prevent offline stripping of existing file xattrs and relabeling of them at runtime, EVM allows only newly created files to be labeled. As pseudo filesystems are not persistent, stripping of xattrs is not a concern. Some LSMs defer file labeling on pseudo filesystems. This patch permits the labeling of existing files on pseudo files systems. Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
CONFIG_IMA_X509_PATH is always defined. This patch removes the IMA_X509_PATH definition and uses CONFIG_IMA_X509_PATH. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dmitry Kasatkin authored
File hashes are automatically set and updated and should not be manually set. This patch limits file hash setting to fix and log modes. Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Mimi Zohar authored
Include don't appraise or measure rules for the NSFS filesystem in the builtin ima_tcb and ima_appraise_tcb policies. Changelog: - Update documentation Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # 3.19
-
Roberto Sassu authored
This patch adds a rule in the default measurement policy to skip inodes in the cgroupfs filesystem. Measurements for this filesystem can be avoided, as all the digests collected have the same value of the digest of an empty file. Furthermore, this patch updates the documentation of IMA policies in Documentation/ABI/testing/ima_policy to make it consistent with the policies set in security/integrity/ima/ima_policy.c. Signed-off-by: Roberto Sassu <rsassu@suse.de> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
- 15 May, 2015 2 commits
-
-
Lukasz Pawelczyk authored
This patch makes the following functions to use ERR_PTR() and related macros to pass the appropriate error code through returned pointers: smk_parse_smack() smk_import_entry() smk_fetch() It also makes all the other functions that use them to handle the error cases properly. This ways correct error codes from places where they happened can be propagated to the user space if necessary. Doing this it fixes a bug in onlycap and unconfined files handling. Previously their content was cleared on any error from smk_import_entry/smk_parse_smack, be it EINVAL (as originally intended) or ENOMEM. Right now it only reacts on EINVAL passing other codes properly to userspace. Comments have been updated accordingly. Signed-off-by: Lukasz Pawelczyk <l.pawelczyk@samsung.com>
-
Seung-Woo Kim authored
The dmabuf fd can be shared between processes via unix domain socket. The file of dmabuf fd is came from anon_inode. The inode has no set and get xattr operations, so it can not be shared between processes with smack. This patch fixes just to ignore private inode including anon_inode for smack_file_receive. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
-
- 13 May, 2015 2 commits
-
-
Roberto Sassu authored
This patch adds the template 'ima-sig' among choices for the kernel parameter 'ima_template'. Signed-off-by: Roberto Sassu <rsassu@suse.de> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
Dan Carpenter authored
It's a bit easier to read this if we split it up into two for loops. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
-
- 12 May, 2015 4 commits
-
-
Casey Schaufler authored
The stub functions in capability.c are no longer required with the list based stacking mechanism. Remove the file. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
Casey Schaufler authored
Instead of using a vector of security operations with explicit, special case stacking of the capability and yama hooks use lists of hooks with capability and yama hooks included as appropriate. The security_operations structure is no longer required. Instead, there is a union of the function pointers that allows all the hooks lists to use a common mechanism for list management while retaining typing. Each module supplies an array describing the hooks it provides instead of a sparsely populated security_operations structure. The description includes the element that gets put on the hook list, avoiding the issues surrounding individual element allocation. The method for registering security modules is changed to reflect the information available. The method for removing a module, currently only used by SELinux, has also changed. It should be generic now, however if there are potential race conditions based on ordering of hook removal that needs to be addressed by the calling module. The security hooks are called from the lists and the first failure is returned. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
Casey Schaufler authored
Add a list header for each security hook. They aren't used until later in the patch series. They are grouped together in a structure so that there doesn't need to be an external address for each. Macro-ize the initialization of the security_operations for each security module in anticipation of changing out the security_operations structure. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <james.l.morris@oracle.com>
-
Casey Schaufler authored
Introduce two macros around calling the functions in the security operations vector. The marco versions here do not change any behavior. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: John Johansen <john.johansen@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <james.l.morris@oracle.com>
-