Pull pci fixes from Bjorn Helgaas:

 - Revert a quirk that prevented Secondary Bus Reset for LSI / Agere
   FW643.

   We thought the device was broken, but the reset does work correctly
   on other platforms, and the reset avoids leaking data out of VMs
   (Bjorn Helgaas)

 - Update MAINTAINERS to reflect that Gustavo Pimentel is no longer
   reachable (Manivannan Sadhasivam)

* tag 'pci-v6.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: Mark LSI FW643 to avoid bus reset"
  MAINTAINERS: Drop Gustavo Pimentel as PCI DWC Maintainer

Pull block fixes from Jens Axboe:

 - MD pull request via Song:
       - UAF fix (Yu)

 - Avoid out-of-bounds shift in blk-iocost (Rik)

 - Fix for q->blkg_list corruption (Ming)

 - Relax virt boundary mask/size segment checking (Ming)

* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
  block: fix that blk_time_get_ns() doesn't update time after schedule
  block: allow device to have both virt_boundary_mask and max segment size
  block: fix q->blkg_list corruption during disk rebind
  blk-iocost: avoid out of bounds shift
  raid1: fix use-after-free for original bio in raid1_write_request()

Pull io_uring fixes from Jens Axboe:

 - Fix for sigmask restoring while waiting for events (Alexey)

 - Typo fix in comment (Haiyue)

 - Fix for a msg_control retstore on SEND_ZC retries (Pavel)

* tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux:
  io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE
  io_uring/net: restore msg_control on sendzc retry
  io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure

Pull ceph fixes from Ilya Dryomov:
 "Two CephFS fixes marked for stable and a MAINTAINERS update"

* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
  MAINTAINERS: remove myself as a Reviewer for Ceph
  ceph: switch to use cap_delay_lock for the unlink delay list
  ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE

Commit d96c3600 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.

It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.

In fact, let's make such breakage more obvious than some esoteric ftrace
record size option.  If you can't parse tabs, you can't have page sizes.

Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard.  But no, that does not
mean that it's ok.

I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary.  But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.

Fixes: d96c3600 ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:

 - Fix the buffer_percent accounting as it is dependent on three
   variables:

     1) pages_read - number of subbuffers read
     2) pages_lost - number of subbuffers lost due to overwrite
     3) pages_touched - number of pages that a writer entered

   These three counters only increment, and to know how many active
   pages there are on the buffer at any given time, the pages_read and
   pages_lost are subtracted from pages_touched.

   But the pages touched was incremented whenever any writer went to the
   next subbuffer even if it wasn't the only one, so it was incremented
   more than it should be causing the counter for how many subbuffers
   currently have content incorrect, which caused the buffer_percent
   that holds waiters until the ring buffer is filled to a given
   percentage to wake up early.

 - Fix warning of unused functions when PERF_EVENTS is not configured in

 - Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE

 - Fix to some kerneldoc function comments in eventfs code.

* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Only update pages_touched when a new page is touched
  tracing: hide unused ftrace_event_id_fops
  tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
  eventfs: Fix kernel-doc comments to functions

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix for syscall_get_nr() to make it work even if tracing is disabled"

* tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: scall: Save thread_info.syscall unconditionally on entry

Pull drm fixes from Dave Airlie:
 "Looks like everyone woke up after holidays, this weeks pull has a
  bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
  i915/xe have a few, a bunch of msm fixes, then some scattered driver
  fixes.

  I expect things will settle down for rc5.

  client:
   - Protect connector modes with mode_config mutex

  ast:
   - Fix soft lockup

  host1x:
   - Do not setup DMA for virtual addresses

  ivpu:
   - Fix deadlock in context_xa
   - PCI fixes
   - Fixes to error handling

  nouveau:
   - gsp: Fix OOB access
   - Fix casting

  panfrost:
   - Fix error path in MMU code

  qxl:
   - Revert "drm/qxl: simplify qxl_fence_wait"

  vmwgfx:
   - Enable DMA for SEV mappings

  i915:
   - Couple CDCLK programming fixes
   - HDCP related fix
   - 4 Bigjoiner related fixes
   - Fix for a circular locking around GuC on reset+wedged case

  xe:
   - Fix double display mutex initializations
   - Fix u32 -> u64 implicit conversions
   - Fix RING_CONTEXT_CONTROL not marked as masked

  msm:
   - DP refcount leak fix on disconnect
   - Add missing newlines to prints in msm_fb and msm_kms
   - fix dpu debugfs entry permissions
   - Fix the interface table for the catalog of X1E80100
   - fix irq message printing
   - Bindings fix to add DP node as child of mdss for mdss node
   - Minor typo fix in DP driver API which handles port status change
   - fix CHRASHDUMP_READ()
   - fix HHB (highest bank bit) for a619 to fix UBWC corruption

  amdgpu:
   - GPU reset fixes
   - Fix some confusing logging
   - UMSCH fix
   - Aborted suspend fix
   - DCN 3.5 fixes
   - S4 fix
   - MES logging fixes
   - SMU 14 fixes
   - SDMA 4.4.2 fix
   - KASAN fix
   - SMU 13.0.10 fix
   - VCN partition fix
   - GFX11 fixes
   - DWB fixes
   - Plane handling fix
   - FAMS fix
   - DCN 3.1.6 fix
   - VSC SDP fixes
   - OLED panel fix
   - GFX 11.5 fix

  amdkfd:
   - GPU reset fixes
   - fix ioctl integer overflow"

* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
  amdkfd: use calloc instead of kzalloc to avoid integer overflow
  drm/xe: Label RING_CONTEXT_CONTROL as masked
  drm/xe/xe_migrate: Cast to output precision before multiplying operands
  drm/xe/hwmon: Cast result to output precision on left shift of operand
  drm/xe/display: Fix double mutex initialization
  drm/amdgpu: differentiate external rev id for gfx 11.5.0
  drm/amd/display: Adjust dprefclk by down spread percentage.
  drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
  drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
  drm/amd/display: fix disable otg wa logic in DCN316
  drm/amd/display: Do not recursively call manual trigger programming
  drm/amd/display: always reset ODM mode in context when adding first plane
  drm/amdgpu: fix incorrect number of active RBs for gfx11
  drm/amd/display: Return max resolution supported by DWB
  amd/amdkfd: sync all devices to wait all processes being evicted
  drm/amdgpu: clear set_q_mode_offs when VM changed
  drm/amdgpu: Fix VCN allocation in CPX partition
  drm/amd/pm: fix the high voltage issue after unload
  drm/amd/display: Skip on writeback when it's not applicable
  drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
  ...

While monitoring the throttle time of IO from iocost, it's found that
such time is always zero after the io_schedule() from ioc_rqos_throttle,
for example, with the following debug patch:

+       printk("%s-%d: %s enter %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());
        while (true) {
                set_current_state(TASK_UNINTERRUPTIBLE);
                if (wait.committed)
                        break;
                io_schedule();
        }
+       printk("%s-%d: %s exit  %llu\n", current->comm, current->pid, __func__, blk_time_get_ns());

It can be observerd that blk_time_get_ns() always return the same time:

[ 1068.096579] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.272587] fio-1268: ioc_rqos_throttle exit  1067901962288
[ 1068.274389] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.472690] fio-1268: ioc_rqos_throttle exit  1067901962288
[ 1068.474485] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.672656] fio-1268: ioc_rqos_throttle exit  1067901962288
[ 1068.674451] fio-1268: ioc_rqos_throttle enter 1067901962288
[ 1068.872655] fio-1268: ioc_rqos_throttle exit  1067901962288

And I think the root cause is that 'PF_BLOCK_TS' is always cleared
by blk_flush_plug() before scheduel(), hence blk_plug_invalidate_ts()
will never be called:

blk_time_get_ns
 plug->cur_ktime = ktime_get_ns();
 current->flags |= PF_BLOCK_TS;

io_schedule:
 io_schedule_prepare
  blk_flush_plug
   __blk_flush_plug
    /* the flag is cleared, while time is not */
    current->flags &= ~PF_BLOCK_TS;
 schedule
 sched_update_worker
  /* the flag is not set, hence plug->cur_ktime is not cleared */
  if (tsk->flags & PF_BLOCK_TS)
   blk_plug_invalidate_ts()

blk_time_get_ns
 /* got the time stashed before schedule */
 return plug->cur_ktime;

Fix the problem by clearing cached time in __blk_flush_plug().

Fixes: 06b23f92 ("block: update cached timestamp post schedule/preemption")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240411032349.3051233-2-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This uses calloc instead of doing the multiplication which might
overflow.

Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fixes for v6.9

Display:
- Fixes for PM refcount leak when DP goes to disconnected state and
  also when link training fails. This is also one of the issues found
  with the pm runtime series
- Add missing newlines to prints in msm_fb and msm_kms
- Change permissions of some dpu debugfs entries which write to const
  data from catalog to read-only to avoid protection faults
- Fix the interface table for the catalog of X1E80100. This is an
  important fix to bringup DP for X1E80100.
- Logging fix to print the callback symbol in the invalid IRQ message
  case rather than printing when its known to be NULL.
- Bindings fix to add DP node as child of mdss for mdss node
- Minor typo fix in DP driver API which handles port status change

GPU:
- fix CHRASHDUMP_READ()
- fix HHB (highest bank bit) for a619 to fix UBWC corruption
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvFwRUcHGWva7oDeydq1PTiZMduuykCD2MWaFrT4iMGZA@mail.gmail.com

Pull cxl fixes from Dave Jiang:

 - Fix index of Clear Event Record handles in cxl_clear_event_record()

 - Fix use before init of map->reg_type in cxl_decode_regblock()

 - Fix initialization of mbox_cmd.size_out in cxl_mem_get_records_log()

 - Fix CXL path access_coordinate computation:
     - Remove unneded check of iter in loop
     - Fix of retrieving of access_coordinate in PCI topology walk
     - Fix of incorrect region access_coordinate data calculation
     - Consolidate of access_coordinates attached to downstream port
       context
     - Add check to validate access_coordinate validity to prevent
       incorrect data being exposed via sysfs

* tag 'cxl-fixes-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Add checks to access_coordinate calculation to fail missing data
  cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord
  cxl: Fix incorrect region perf data calculation
  cxl: Fix retrieving of access_coordinates in PCIe path
  cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates()
  cxl/core: Fix initialization of mbox_cmd.size_out in get event
  cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned
  cxl/mem: Fix for the index of Clear Event Record Handle

Merge tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Some cosmetic changes (Erni Sri Satya Vennela, Li Zhijian)

 - Introduce hv_numa_node_to_pxm_info() (Nuno Das Neves)

 - Fix KVP daemon to handle IPv4 and IPv6 combination for keyfile format
   (Shradha Gupta)

 - Avoid freeing decrypted memory in a confidential VM (Rick Edgecombe
   and Michael Kelley)

* tag 'hyperv-fixes-signed-20240411' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted
  uio_hv_generic: Don't free decrypted memory
  hv_netvsc: Don't free decrypted memory
  Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl
  Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails
  hv/hv_kvp_daemon: Handle IPv4 and Ipv6 combination for keyfile format
  hv: vmbus: Convert sprintf() family to sysfs_emit() family
  mshyperv: Introduce hv_numa_node_to_pxm_info()
  x86/hyperv: Cosmetic changes for hv_apic.c

The "buffer_percent" logic that is used by the ring buffer splice code to
only wake up the tasks when there's no data after the buffer is filled to
the percentage of the "buffer_percent" file is dependent on three
variables that determine the amount of data that is in the ring buffer:

 1) pages_read - incremented whenever a new sub-buffer is consumed
 2) pages_lost - incremented every time a writer overwrites a sub-buffer
 3) pages_touched - incremented when a write goes to a new sub-buffer

The percentage is the calculation of:

  (pages_touched - (pages_lost + pages_read)) / nr_pages

Basically, the amount of data is the total number of sub-bufs that have been
touched, minus the number of sub-bufs lost and sub-bufs consumed. This is
divided by the total count to give the buffer percentage. When the
percentage is greater than the value in the "buffer_percent" file, it
wakes up splice readers waiting for that amount.

It was observed that over time, the amount read from the splice was
constantly decreasing the longer the trace was running. That is, if one
asked for 60%, it would read over 60% when it first starts tracing, but
then it would be woken up at under 60% and would slowly decrease the
amount of data read after being woken up, where the amount becomes much
less than the buffer percent.

This was due to an accounting of the pages_touched incrementation. This
value is incremented whenever a writer transfers to a new sub-buffer. But
the place where it was incremented was incorrect. If a writer overflowed
the current sub-buffer it would go to the next one. If it gets preempted
by an interrupt at that time, and the interrupt performs a trace, it too
will end up going to the next sub-buffer. But only one should increment
the counter. Unfortunately, that was not the case.

Change the cmpxchg() that does the real switch of the tail-page into a
try_cmpxchg(), and on success, perform the increment of pages_touched. This
will only increment the counter once for when the writer moves to a new
sub-buffer, and not when there's a race and is incremented for when a
writer and its preempting writer both move to the same new sub-buffer.

Link: https://lore.kernel.org/linux-trace-kernel/20240409151309.0d0e5056@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 2c2b0a78 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When CONFIG_PERF_EVENTS, a 'make W=1' build produces a warning about the
unused ftrace_event_id_fops variable:

kernel/trace/trace_events.c:2155:37: error: 'ftrace_event_id_fops' defined but not used [-Werror=unused-const-variable=]
 2155 | static const struct file_operations ftrace_event_id_fops = {

Hide this in the same #ifdef as the reference to it.

Link: https://lore.kernel.org/linux-trace-kernel/20240403080702.3509288-7-arnd@kernel.org

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Clément Léger <cleger@rivosinc.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com>
Fixes: 620a30e9 ("tracing: Don't pass file_operations array to event_create_dir()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix FTRACE_RECORD_RECURSION_SIZE entry, replace tab with
a space character. It helps Kconfig parsers to read file
without error.

Link: https://lore.kernel.org/linux-trace-kernel/20240322121801.1803948-1-ppandit@redhat.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 773c1670 ("ftrace: Add recording of functions that caused recursion")
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

This commit fix kernel-doc style comments with complete parameter
descriptions for the lookup_file(),lookup_dir_entry() and
lookup_file_dentry().

Link: https://lore.kernel.org/linux-trace-kernel/20240322062604.28862-1-yang.lee@linux.alibaba.comSigned-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

It has been a couple of years since I stepped down as CephFS maintainer.
I'm not involved in any meaningful way with the project these days, so
while I'm happy to help review the occasional patch, I don't need to be
cc'ed on all of them.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

The same list item will be used in both cap_delay_list and
cap_unlink_delay_list, so it's buggy to use two different locks
to protect them.

Cc: stable@vger.kernel.org
Fixes: dbc347ef ("ceph: add ceph_cap_unlink_work to fire check_caps() immediately")
Link: https://lists.ceph.io/hyperkitty/list/ceph-users@ceph.io/thread/AODC76VXRAMXKLFDCTK4TKFDDPWUSCN5Reported-by: Marc Ruhmann <ruhmann@luis.uni-hannover.de>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Marc Ruhmann <ruhmann@luis.uni-hannover.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

- Fix double display mutex initializations
- Fix u32 -> u64 implicit conversions
- Fix RING_CONTEXT_CONTROL not marked as masked
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ewvvtgcb2gonxvccws6nt6fqswoyfp4g43t5ex24vpqwtrxdzm@hgjoz5uirmxx

Merge tag 'drm-misc-fixes-2024-04-11' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes

Short summary of fixes pull:

ast:
- Fix soft lockup

client:
- Protect connector modes with mode_config mutex

host1x:
- Do not setup DMA for virtual addresses

ivpu:
- Fix deadlock in context_xa
- PCI fixes
- Fixes to error handling

nouveau:
- gsp: Fix OOB access
- Fix casting

panfrost:
- Fix error path in MMU code

qxl:
- Revert "drm/qxl: simplify qxl_fence_wait"

vmwgfx:
- Enable DMA for SEV mappings
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240411073403.GA9895@localhost.localdomain

Pull ACPI fixes from Rafael Wysocki:
 "These fix the handling of dependencies between devices in the ACPI
  device enumeration code and address a _UID matching regression from
  the 6.8 development cycle.

  Specifics:

   - Modify the ACPI device enumeration code to avoid counting
     dependencies that have been met already as unmet (Hans de Goede)

   - Make _UID matching take the integer value of 0 into account as
     appropriate (Raag Jadav)"

* tag 'acpi-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: bus: allow _UID matching for integer zero
  ACPI: scan: Do not increase dep_unmet for already met dependencies

Pull power management fix from Rafael Wysocki:
 "Fix the suspend-to-idle core code to guarantee that timers queued on
  CPUs other than the one that has first left the idle state, which
  should expire directly after resume, will be handled (Anna-Maria
  Behnsen)"

* tag 'pm-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: s2idle: Make sure CPUs will wakeup directly on resume

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth.

  Current release - new code bugs:

   - netfilter: complete validation of user input

   - mlx5: disallow SRIOV switchdev mode when in multi-PF netdev

  Previous releases - regressions:

   - core: fix u64_stats_init() for lockdep when used repeatedly in one
     file

   - ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addr

   - bluetooth: fix memory leak in hci_req_sync_complete()

   - batman-adv: avoid infinite loop trying to resize local TT

   - drv: geneve: fix header validation in geneve[6]_xmit_skb

   - drv: bnxt_en: fix possible memory leak in
     bnxt_rdma_aux_device_init()

   - drv: mlx5: offset comp irq index in name by one

   - drv: ena: avoid double-free clearing stale tx_info->xdpf value

   - drv: pds_core: fix pdsc_check_pci_health deadlock

  Previous releases - always broken:

   - xsk: validate user input for XDP_{UMEM|COMPLETION}_FILL_RING

   - bluetooth: fix setsockopt not validating user input

   - af_unix: clear stale u->oob_skb.

   - nfc: llcp: fix nfc_llcp_setsockopt() unsafe copies

   - drv: virtio_net: fix guest hangup on invalid RSS update

   - drv: mlx5e: Fix mlx5e_priv_init() cleanup flow

   - dsa: mt7530: trap link-local frames regardless of ST Port State"

* tag 'net-6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
  net: ena: Set tx_info->xdpf value to NULL
  net: ena: Fix incorrect descriptor free behavior
  net: ena: Wrong missing IO completions check order
  net: ena: Fix potential sign extension issue
  af_unix: Fix garbage collector racing against connect()
  net: dsa: mt7530: trap link-local frames regardless of ST Port State
  Revert "s390/ism: fix receive message buffer allocation"
  net: sparx5: fix wrong config being used when reconfiguring PCS
  net/mlx5: fix possible stack overflows
  net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev
  net/mlx5e: RSS, Block XOR hash with over 128 channels
  net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit
  net/mlx5e: HTB, Fix inconsistencies with QoS SQs number
  net/mlx5e: Fix mlx5e_priv_init() cleanup flow
  net/mlx5e: RSS, Block changing channels number when RXFH is configured
  net/mlx5: Correctly compare pkt reformat ids
  net/mlx5: Properly link new fs rules into the tree
  net/mlx5: offset comp irq index in name by one
  net/mlx5: Register devlink first under devlink lock
  net/mlx5: E-switch, store eswitch pointer before registering devlink_param
  ...

Pull SCSI fixes from James Bottomley:
 "The most important fix is the sg one because the regression it fixes
  (spurious warning and use after final put) is already backported to
  stable.

  The next biggest impact is the target fix for wrong credentials used
  to load a module because it's affecting new kernels installed on
  selinux based distributions.

  The other three fixes are an obvious off by one and SATA protocol
  issues"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()
  scsi: hisi_sas: Modify the deadline for ata_wait_after_reset()
  scsi: hisi_sas: Handle the NCQ error returned by D2H frame
  scsi: target: Fix SELinux error when systemd-modules loads the target module
  scsi: sg: Avoid race in error handling & drop bogus warn

Merge tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:

 - make {virt, phys, page, pfn} translation work with KFENCE for
   LoongArch (otherwise NVMe and virtio-blk cannot work with KFENCE
   enabled)

 - update dts files for Loongson-2K series to make devices work
   correctly

 - fix a build error

* tag 'loongarch-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Include linux/sizes.h in addrspace.h to prevent build errors
  LoongArch: Update dts for Loongson-2K2000 to support GMAC/GNET
  LoongArch: Update dts for Loongson-2K2000 to support PCI-MSI
  LoongArch: Update dts for Loongson-2K2000 to support ISA/LPC
  LoongArch: Update dts for Loongson-2K1000 to support ISA/LPC
  LoongArch: Make virt_addr_valid()/__virt_addr_valid() work with KFENCE
  LoongArch: Make {virt, phys, page, pfn} translation work with KFENCE
  mm: Move lowmem_page_address() a little later

Pull more bcachefs fixes from Kent Overstreet:
 "Notable user impacting bugs

   - On multi device filesystems, recovery was looping in
     btree_trans_too_many_iters(). This checks if a transaction has
     touched too many btree paths (because of iteration over many keys),
     and isuses a restart to drop unneeded paths.

     But it's now possible for some paths to exceed the previous limit
     without iteration in the interior btree update path, since the
     transaction commit will do alloc updates for every old and new
     btree node, and during journal replay we don't use the btree write
     buffer for locking reasons and thus those updates use btree paths
     when they wouldn't normally.

   - Fix a corner case in rebalance when moving extents on a
     durability=0 device. This wouldn't be hit when a device was
     formatted with durability=0 since in that case we'll only use it as
     a write through cache (only cached extents will live on it), but
     durability can now be changed on an existing device.

   - bch2_get_acl() could rarely forget to handle a transaction restart;
     this manifested as the occasional missing acl that came back after
     dropping caches.

   - Fix a major performance regression on high iops multithreaded write
     workloads (only since 6.9-rc1); a previous fix for a deadlock in
     the interior btree update path to check the journal watermark
     introduced a dependency on the state of btree write buffer flushing
     that we didn't want.

   - Assorted other repair paths and recovery fixes"

* tag 'bcachefs-2024-04-10' of https://evilpiepirate.org/git/bcachefs: (25 commits)
  bcachefs: Fix __bch2_btree_and_journal_iter_init_node_iter()
  bcachefs: Kill read lock dropping in bch2_btree_node_lock_write_nofail()
  bcachefs: Fix a race in btree_update_nodes_written()
  bcachefs: btree_node_scan: Respect member.data_allowed
  bcachefs: Don't scan for btree nodes when we can reconstruct
  bcachefs: Fix check_topology() when using node scan
  bcachefs: fix eytzinger0_find_gt()
  bcachefs: fix bch2_get_acl() transaction restart handling
  bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list
  bcachefs: Fix gap buffer bug in bch2_journal_key_insert_take()
  bcachefs: Rename struct field swap to prevent macro naming collision
  MAINTAINERS: Add entry for bcachefs documentation
  Documentation: filesystems: Add bcachefs toctree
  bcachefs: JOURNAL_SPACE_LOW
  bcachefs: Disable errors=panic for BCH_IOCTL_FSCK_OFFLINE
  bcachefs: Fix BCH_IOCTL_FSCK_OFFLINE for encrypted filesystems
  bcachefs: fix rand_delete unit test
  bcachefs: fix ! vs ~ typo in __clear_bit_le64()
  bcachefs: Fix rebalance from durability=0 device
  bcachefs: Print shutdown journal sequence number
  ...

Merge tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform fix from Tzung-Bi Shih:
 "Fix a NULL pointer dereference"

* tag 'tag-chrome-platform-fixes-for-v6.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_uart: properly fix race condition

* acpi-bus:
  ACPI: bus: allow _UID matching for integer zero

The page has been marked clean before writepage is called.  If we don't
redirty it before postponing the write, it might never get written.

Cc: stable@vger.kernel.org
Fixes: 503d4fa6 ("ceph: remove reliance on bdi congestion")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

RING_CONTEXT_CONTROL is a masked register.

v2: Also clean up setting register value (Lucas)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404161256.3852502-1-ashutosh.dixit@intel.com
(cherry picked from commit dc30c6e7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Addressing potential overflow in result of  multiplication of two lower
precision (u32) operands before widening it to higher precision
(u64).

-v2
Fix commit message and description. (Rodrigo)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401175300.3823653-1-himal.prasad.ghimiray@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 34820967)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

Address potential overflow in result of left shift of a
lower precision (u32) operand before assignment to higher
precision (u64) variable.

v2:
 - Update commit message. (Himal)

Fixes: 4446fcf2 ("drm/xe/hwmon: Expose power1_max_interval")
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-5-karthik.poosa@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 883232b4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

All of these mutexes are already initialized by the display side since
commit 3fef3e6f ("drm/i915: move display mutex inits to display
code"), so the xe shouldn´t initialize them.

Fixes: 44e69495 ("drm/xe/display: Implement display support")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405200711.2041428-1-lucas.demarchi@intel.comSigned-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 117de185)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

David Arinzon says:

====================
ENA driver bug fixes

From: David Arinzon <darinzon@amazon.com>

This patchset contains multiple bug fixes for the
ENA driver.
====================

Link: https://lore.kernel.org/r/20240410091358.16289-1-darinzon@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The patch mentioned in the `Fixes` tag removed the explicit assignment
of tx_info->xdpf to NULL with the justification that there's no need
to set tx_info->xdpf to NULL and tx_info->num_of_bufs to 0 in case
of a mapping error. Both values won't be used once the mapping function
returns an error, and their values would be overridden by the next
transmitted packet.

While both values do indeed get overridden in the next transmission
call, the value of tx_info->xdpf is also used to check whether a TX
descriptor's transmission has been completed (i.e. a completion for it
was polled).

An example scenario:
1. Mapping failed, tx_info->xdpf wasn't set to NULL
2. A VF reset occurred leading to IO resource destruction and
   a call to ena_free_tx_bufs() function
3. Although the descriptor whose mapping failed was freed by the
   transmission function, it still passes the check
     if (!tx_info->skb)

   (skb and xdp_frame are in a union)
4. The xdp_frame associated with the descriptor is freed twice

This patch returns the assignment of NULL to tx_info->xdpf to make the
cleaning function knows that the descriptor is already freed.

Fixes: 504fd6a5 ("net: ena: fix DMA mapping function issues in XDP")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

ENA has two types of TX queues:
- queues which only process TX packets arriving from the network stack
- queues which only process TX packets forwarded to it by XDP_REDIRECT
  or XDP_TX instructions

The ena_free_tx_bufs() cycles through all descriptors in a TX queue
and unmaps + frees every descriptor that hasn't been acknowledged yet
by the device (uncompleted TX transactions).
The function assumes that the processed TX queue is necessarily from
the first category listed above and ends up using napi_consume_skb()
for descriptors belonging to an XDP specific queue.

This patch solves a bug in which, in case of a VF reset, the
descriptors aren't freed correctly, leading to crashes.

Fixes: 548c4940 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Missing IO completions check is called every second (HZ jiffies).
This commit fixes several issues with this check:

1. Duplicate queues check:
   Max of 4 queues are scanned on each check due to monitor budget.
   Once reaching the budget, this check exits under the assumption that
   the next check will continue to scan the remainder of the queues,
   but in practice, next check will first scan the last already scanned
   queue which is not necessary and may cause the full queue scan to
   last a couple of seconds longer.
   The fix is to start every check with the next queue to scan.
   For example, on 8 IO queues:
   Bug: [0,1,2,3], [3,4,5,6], [6,7]
   Fix: [0,1,2,3], [4,5,6,7]

2. Unbalanced queues check:
   In case the number of active IO queues is not a multiple of budget,
   there will be checks which don't utilize the full budget
   because the full scan exits when reaching the last queue id.
   The fix is to run every TX completion check with exact queue budget
   regardless of the queue id.
   For example, on 7 IO queues:
   Bug: [0,1,2,3], [4,5,6], [0,1,2,3]
   Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4]
   The budget may be lowered in case the number of IO queues is less
   than the budget (4) to make sure there are no duplicate queues on
   the same check.
   For example, on 3 IO queues:
   Bug: [0,1,2,0], [1,2,0,1]
   Fix: [0,1,2], [0,1,2]

Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Amit Bernstein <amitbern@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Small unsigned types are promoted to larger signed types in
the case of multiplication, the result of which may overflow.
In case the result of such a multiplication has its MSB
turned on, it will be sign extended with '1's.
This changes the multiplication result.

Code example of the phenomenon:
-------------------------------
u16 x, y;
size_t z1, z2;

x = y = 0xffff;
printk("x=%x y=%x\n",x,y);

z1 = x*y;
z2 = (size_t)x*y;

printk("z1=%lx z2=%lx\n", z1, z2);

Output:
-------
x=ffff y=ffff
z1=fffffffffffe0001 z2=fffe0001

The expected result of ffff*ffff is fffe0001, and without the
explicit casting to avoid the unwanted sign extension we got
fffffffffffe0001.

This commit adds an explicit casting to avoid the sign extension
issue.

Fixes: 689b2bda ("net: ena: add functions for handling Low Latency Queues in ena_com")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

  - L2CAP: Don't double set the HCI_CONN_MGMT_CONNECTED bit
  - Fix memory leak in hci_req_sync_complete
  - hci_sync: Fix using the same interval and window for Coded PHY
  - Fix not validating setsockopt user input

* tag 'for-net-2024-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: l2cap: Don't double set the HCI_CONN_MGMT_CONNECTED bit
  Bluetooth: hci_sock: Fix not validating setsockopt user input
  Bluetooth: ISO: Fix not validating setsockopt user input
  Bluetooth: L2CAP: Fix not validating setsockopt user input
  Bluetooth: RFCOMM: Fix not validating setsockopt user input
  Bluetooth: SCO: Fix not validating setsockopt user input
  Bluetooth: Fix memory leak in hci_req_sync_complete()
  Bluetooth: hci_sync: Fix using the same interval and window for Coded PHY
  Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset
====================

Link: https://lore.kernel.org/r/20240410191610.4156653-1-luiz.dentz@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>