Refactor CRIU restore BO to reduce identation.
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When the process is getting restored, the queues are not mapped yet, so
there is no VMID assigned for this process and no TLBs to flush.
Signed-off-by: David Yat Sin <david.yatsin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
The DP KVM failed to light up, since the lttpr_mode is not reset to
default value when failed to read LTTPR capabilities, and the
variable max_link_rate retains a initial value zero, this cause variable
link_rate be assigned to an error value zero, consquently pixel_clock
get wrong value zero, and kvm can't light up.

[how]
Reset lttpr_mode to default value when failed to read LTTPR
capabilities, so that the link_rate fallbacks to the minimum rate that
supported by link encoder and sink.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When PMFW is really busy, it will respond with 0xFC. However, it doesn't
change the response register state when it becomes free. Driver should
retry and proceed to send message if the response status is 0xFC.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

It should notice SMU to update bad channel info when detected
uncorrectable error in UMC block
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

support message SMU update bad channel info to update HBM bad channel
info in OOB table
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

FPU operations in dcn10 was already moved to dml folder via calcs code.
However, dcn1_0_ip and dcn_1_0_soc with FPU componentd remains on dcn10.
Following previous changes to isolate FPU, this patch creates dcn10_fpu
files to isolate FPU-specific code and moves those structs to it.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dml/dcn20_fpu file centralizes all DCN2x functions that require FPU access.
Therefore, this patch moves FPU-related code from dcn21 to dcn20_fpu. These
include:
- dcn21_populate_dml_pipes_from_context()
- dcn21_validate_bandwidth_fp() and related:
  - dcn21_calculate_wm(),
  - patch_bounding_box(),
  - calculate_wm_set_for_vlevel()
- renaming update_bw_bounding_box() to dcn21_update_bw_bounding_box(), move
to dcn20_fpu with related static function construct_low_pstate_lvl()

Also, make dcn21_fast_validate_bw() public in dcn21_resource as it is called
by dcn21_validate_bandwidth_fp() now in dcn20_fpu.

Reuse dcn20_fpu_adjust_dppclk() in dcn21_fast_validate_bw() as it isolates
the same FPU operation.

Include dchubbub.h as it is required in dcn21_populate_dml_pipes_from_context()
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move parts of dcn20 code that uses FPU to dml folder. It aims to isolate
FPU operations as described by series:

drm/amd/display: Introduce FPU directory inside DC
https://patchwork.freedesktop.org/series/93042/

This patch moves the following functions from dcn20_resource to
dml/dcn20_fpu and calls of public functions in dcn20_resource are
wrapped by DC_FP_START/END():

- void dcn20_populate_dml_writeback_from_context
- static bool is_dtbclk_required()
- static enum dcn_zstate_support_state()
- void dcn20_calculate_dlg_params()
- static void swizzle_to_dml_params()
- int dcn20_populate_dml_pipes_from_context()
- void dcn20_calculate_wm()
- void dcn20_cap_soc_clocks()
- void dcn20_update_bounding_box()
- void dcn20_patch_bounding_box()
- bool dcn20_validate_bandwidth_fp()

This movement also affects dcn21/30/31, as dcn20_calculate_dlg_params()
is used by them. For this reason, I included dcn20_fpu headers in
dcn20_resource headers to make dcn20_calculate_dlg_params() visible to
dcn21/30/31.

Three new functions are created to isolate well-delimited FPU
operations:

- void dcn20_fpu_set_wb_arb_params(): set cli_watermark,
  pstate_watermark and time_per_pixel from wb_arb_params (struct
mcif_arb_params), since those uses FPU operations on double types:
WritebackUrgentWatermark, WritebackDRAMClockChangeWatermark, '16.0'.
- void dcn20_fpu_set_wm_ranges(): set min_fill_clk_mhz and
  max_fill_clk_mhz involves FPU calcs on dram_speed_mts (double type);
- void dcn20_fpu_adjust_dppclk(): adjust operation on RequiredDPPCLK
  that is a double.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]

On LNX, TO_CLK_MGR_INTERNAL() only works to get clk_mgr_internal from a
given clk_mgr. In clk_mgr_dcn316 struct, the clk_mgr_internal is already
a memeber by the alias 'base'

[How]

Use &clk_mgr->base instead.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
The issue only occurs during the GPU reset code path.

We first backup the current state prior to commiting 0 streams
internally from DM to DC. This state backup contains valid link
encoder assignments.

DC will clear the link encoder assignments as part of current state
(but not the backup, since it was a copied before the commit) and
free the extra stream reference it held.

DC requires that the link encoder assignments remain cleared/invalid
prior to commiting. Since the backup still has valid assignments we
call the interface post reset to clear them. This routine also
releases the extra reference that the link encoder interface held -
resulting in a double free (and eventually a NULL pointer dereference).

[How]
We'll have to do a full DC commit anyway after GPU reset because
the stream count previously went to 0.

We don't need to retain the assignment that we had backed up, so
just copy off of the now clean current state assignment after the
reset has occcurred with the new link_enc_cfg_copy() interface.

Fixes: 6d63fcc2 ("drm/amd/display: Reset link encoder assignments for GPU reset")
Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Virtualization enters blue screen of death (BSoD)
due to NULL res_pool object when accessing DSC
encoder capability.

[How]
Add NULL check to avoid blue screen of death.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.176

    This version brings along following fixes:
    - move FPU operations from dcn21 to dml/dcn20 folder
    - move FPU-related code from dcn20 to dml folder
    - Fix compile error from TO_CLK_MGR_INTERNAL
    - Fix double free during GPU reset on DC streams
    - Add NULL check
    - [FW Promotion] Release 0.0.107.0
    - enable dcn315/316 s0i2 support
    - handle DP2.0 RX with UHBR20 but not UHBR13.5 support
    - disable HPD SW timer for passive dongle type 1 only
    - add gamut coefficient set A and B
    - merge two duplicated clock_source_create
    - Add link dp trace support
    - move FPU associated DCN303 code to DML folder
    - Release AUX engine after failed acquire
    - Add minimal pipe split transition state
    - Clean up fixed VS PHY test w/a function
    - fix the clock source contruct for dcn315
    - cleaning up smu_if to add future flexibility
    - fix deep color ratio
    - add debug option to bypass ssinfo from bios for dcn315
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
enable the support in driver, let the control by CMOS
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
DP2.0 defines DP2.0 RX capability using bit maps. This means there is
a corner case the DP2.0 RX can declare UHBR20 capability but not UHBR13.5 support.
In this case we should skip UHBR13.5 selection and continue to our next option
in decide liink settings.
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Need to provide this workaround
only for type 1 passive dongle

[how]
Detect if dongle is type 1 or 2.
And use it to determine if w/a is needed.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Screen shake on DCN3 night light SDR BR3.

[How]
Change the logic to use double buffer reisgter on gamut settings.
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
dcn31x could use dcn31 sepcific which contains deep_color_ratio for dmub
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
It is nice to have link training and link loss status logging in
our trace, and this patch add the all necessary accessors in dc
side.

[How]
1. Define dp_trace struct and create new file link_dp_trace.c and
link_dp_trace.h;
2. Add dp link training status update in dc_link_dp.c;
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
As part of the FPU isolation work documented in
https://patchwork.freedesktop.org/series/93042/, isolate
code that uses FPU in DCN303 to DML, where all FPU code
should locate.
Co-authored-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Jasdeep Dhillon <jasdeep.dhillon@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
There is a sequence in which aux arbitration
doesn't work correctly. Driver is left with
aux access after it times out waiting for access.
In future dmub fw is never granted aux access
and is stuck in a while loop.

[How]
Cancel aux request from driver after timing out.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wyatt Wood <wyatt.wood@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY?] When adding/removng a plane to some configurations,
unsupported pipe programming can occur when moving to a new plane.

[HOW?]
Add a safe transistion state before programming new configuration.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Unify naming for fixed VS workarounds.

[How]
Rename function to match naming convention.
Refactor code to remove unused function.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why]
Driver sends invalid deep color ratio to DMUB. Update it to the right
one by using another clock source construct.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

why and how:
need to hook in new smu interfaces
cleaning up code that used old variables
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leung, Martin <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fix enum mapping for deep color ratio
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
Add debug option to bypass ssinfo from BIOS for dcn315.
Reviewed-by: Park, Chris <Chris.Park@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

smu 13.0.5 use new registers for smu msg and param.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On aldebaran, BACO dummy mode may be enabled during reset. Disable
it during resume.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2022-03-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Reduce overzealous alignment constraints for GGTT
- Add missing mdev attribute "name" for GVT
- Async flip fixes (Ville)
- Static checker fix (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YimvoLOZ8RPKrITv@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-next-5.18-2022-03-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.18-2022-03-09:

amdgpu:
- Misc code cleanups
- Misc display fixes
- PSR display fixes
- More RAS cleanup
- Hotplug fix
- Bump minor version for hotplug tests
- SR-IOV fixes
- GC 10.3.7 updates
- Remove some firmwares which are no longer used
- Mode2 reset refactor
- Aldebaran fixes
- Add VCN fwlog feature for VCN debugging
- CS code cleanup
- Fix clang warning
- Fix CS clean up rebase breakage

amdkfd:
- SVM fixes
- SMI event fixes and cleanups
- vmid_pasid mapping fix for gfx10.3
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309224439.2178877-1-alexander.deucher@amd.com

Follow-up pull req for v5.18 to pull in some important fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwHFHEd+9df-0aBOCfmw+ULvTS3f18sJuq_cvGKLDSjw@mail.gmail.com

It should be p->job->ibs[j] instead of p->job->ibs[i] here.

Fixes: cdc7893f ("drm/amdgpu: use job and ib structures directly in CS parsers")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

it makes no sense to continue with an undefined vmid.

Fixes: c8b0507f ("drm/amdkfd: judge get_atc_vmid_pasid_mapping_info before call")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'exynos-drm-next-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

New feature
- Add BGR pixel format support for FIMD device. As for this,
  this patch uses undocumented register, WIN_RGB_ORDER, but
  it is safe because product kernels have been using same
  register.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304085220.324245-1-inki.dae@samsung.com

Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.

Bspec: 45015
Fixes: 87bd701e ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
(cherry picked from commit c64fa77d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

Avoid going down devfreq paths on devices where devfreq is not
initialized.

v2: Change has_devfreq() logic [Dmitry]
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 6aa89ae1 ("drm/msm/gpu: Cancel idle/boost work on suspend")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220308184844.1121029-1-robdclark@gmail.com

These casts need to happen before the shift.  The only time it would
matter would be if "rev.core" is >= 128.  In that case the sign bit
would be extended and we do not want that.

Fixes: afab9d91 ("drm/msm/adreno: Expose speedbin to userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220307133105.GA17534@kiliSigned-off-by: Rob Clark <robdclark@chromium.org>

- add the missing attribute "name" in VFIO mdev hierarchy.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e38f0725-6b22-8e49-b8f6-41986b0ece06@intel.com