Let's also fix IPsec PMTU storage.  When we get an MTU update for an
xfrm_dst, it should be done to the top dst, not the bottom dst.

For example, when we get a need-to-frag message for host C behind
a our IPsec peer B, we should be updating the dst entry for C and
not B as we do now.

I've removed the boundary checks since the same checks are done
in ipv[46]/route.c already.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was a lot of fun in laying the foundations.  Now it's time
to start using it.

This patch fixes the calculations in xfrm[46]_output so that we don't
reject properly sized packets from the TCP stack.  The previous
calculation is wrong because the xfrm overhead is not constant.

After this I'll start cleaning stuff up.  For example, tcp's
ext2_header_len and dst's path can both be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Finally this is the patch that sets the MTU values of each xfrm_dst
and keeps it up-to-date.

To recap, at this point we've obtained accurate MTU values at each
xfrm_dst.  The next step would be to start using it as
dst_pmtu(xfrm_dst).
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a pointer to the route corresponding to the specific
flow over the SA of an xfrm_dst that's being used.

It also sets the next pointer of each xfrm_dst to the one above it.
This allows to traverse the list upwards from the bottom.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch introduces the function xfrm_state_mtu which calculates
the MTU under a specific SA.  This function can be simplified once
we get rid all other uses of get_max_size as we can move the calculation
into the invidual SA type.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

James is stepping down for a while.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does:
	- consolidate the three implementations of compat_sys_waitid
	  (some were called sys32_waitid).
	- adds sys_waitid syscall to ppc
	- adds sys_waitid and compat_sys_waitid syscalls to ppc64

I have left PARISC and MIPS to their own devices (by request).
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Ben Dooks

This patch extends the s3c2410 serial driver to allow it
to use fclk and correctly determine the uart dividers. The
necessary defines are added to the serial headers as well.
Also modified is the header to point at the current
Simtec linux pages, as well as extend the copyright.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

The read method doesn't need to calculate eof/start offsets.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

generic.c vfree() checking cleanups.

Signed-off by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Dave Jones <davej@redhat.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

If a debugger set the TF bit, make sure to clear it when creating a
signal context.  Otherwise, TF will be incorrectly restored by
sigreturn.
Signed-off-by: Daniel Jacobowitz <dan@debian.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

set_pmd has specific behaviour on ARM which may be unexpected.  Since
it is rather too close to macros used by other architectures, open
code this functionality.
Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: Russell King <rmk@arm.linux.org.uk>

Signed-off-by: David S. Miller <davem@davemloft.net>

into picasso.davemloft.net:/home/davem/src/BK/flush_cache_page-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

Initialize the mdio_lock spin lock in mii_info struct, which is otherwise
accessed prior to initialization.
Signed-off-by: Jaka Mocnik <jaka@activetools.si>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

into nuts.davemloft.net:/disk1/BK/net-2.6

This patch adds the missing entry for the BPA 100/105 driver
into the MAINTAINERS file.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch adds callback functions for changing the link key and
switching the role to the Bluetooth core interface.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The clock offset value is stored in little endian and so convert
it before showing it in the inquiry cache list.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>