1. 18 Dec, 2015 28 commits
    • James Hogan's avatar
      MIPS: KVM: Uninit VCPU in vcpu_create error path · b3a1f082
      James Hogan authored
      commit 585bb8f9 upstream.
      
      If either of the memory allocations in kvm_arch_vcpu_create() fail, the
      vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd
      in the error handling path. Add a call to kvm_vcpu_uninit() to fix this.
      
      Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM")
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      [ luis: backported to 3.16:
        - file rename: mips.c -> kvm_mips.c ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      b3a1f082
    • James Hogan's avatar
      MIPS: KVM: Fix CACHE immediate offset sign extension · fe632007
      James Hogan authored
      commit c5c2a3b9 upstream.
      
      The immediate field of the CACHE instruction is signed, so ensure that
      it gets sign extended by casting it to an int16_t rather than just
      masking the low 16 bits.
      
      Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      [ luis: backported to 3.16:
        - file rename: emulate.c -> kvm_mips_emul.c ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      fe632007
    • James Hogan's avatar
      MIPS: KVM: Fix ASID restoration logic · 9571c879
      James Hogan authored
      commit 002374f3 upstream.
      
      ASID restoration on guest resume should determine the guest execution
      mode based on the guest Status register rather than bit 30 of the guest
      PC.
      
      Fix the two places in locore.S that do this, loading the guest status
      from the cop0 area. Note, this assembly is specific to the trap &
      emulate implementation of KVM, so it doesn't need to check the
      supervisor bit as that mode is not implemented in the guest.
      
      Fixes: b680f70f ("KVM/MIPS32: Entry point for trampolining to...")
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Gleb Natapov <gleb@kernel.org>
      Cc: linux-mips@linux-mips.org
      Cc: kvm@vger.kernel.org
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      [ luis: backported to 3.16:
        - file rename: locore.S -> kvm_locore.S ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9571c879
    • Junichi Nomura's avatar
      dm: fix ioctl retry termination with signal · a6248845
      Junichi Nomura authored
      commit 5bbbfdf6 upstream.
      
      dm-mpath retries ioctl, when no path is readily available and the device
      is configured to queue I/O in such a case. If you want to stop the retry
      before multipathd decides to turn off queueing mode, you could send
      signal for the process to exit from the loop.
      
      However the check of fatal signal has not carried along when commit
      6c182cd8 ("dm mpath: fix ioctl deadlock when no paths") moved the
      loop from dm-mpath to dm core. As a result, we can't terminate such
      a process in the retry loop.
      
      Easy reproducer of the situation is:
      
        # dmsetup create mp --table '0 1024 multipath 0 0 0 0'
        # dmsetup message mp 0 'queue_if_no_path'
        # sg_inq /dev/mapper/mp
      
      then you should be able to terminate sg_inq by pressing Ctrl+C.
      
      Fixes: 6c182cd8 ("dm mpath: fix ioctl deadlock when no paths")
      Signed-off-by: default avatarJun'ichi Nomura <j-nomura@ce.jp.nec.com>
      Cc: Hannes Reinecke <hare@suse.de>
      Cc: Mikulas Patocka <mpatocka@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      a6248845
    • Mike Snitzer's avatar
      dm thin: restore requested 'error_if_no_space' setting on OODS to WRITE transition · 791620e8
      Mike Snitzer authored
      commit 172c2386 upstream.
      
      A thin-pool that is in out-of-data-space (OODS) mode may transition back
      to write mode -- without the admin adding more space to the thin-pool --
      if/when blocks are released (either by deleting thin devices or
      discarding provisioned blocks).
      
      But as part of the thin-pool's earlier transition to out-of-data-space
      mode the thin-pool may have set the 'error_if_no_space' flag to true if
      the no_space_timeout expires without more space having been made
      available.  That implementation detail, of changing the pool's
      error_if_no_space setting, needs to be reset back to the default that
      the user specified when the thin-pool's table was loaded.
      
      Otherwise we'll drop the user requested behaviour on the floor when this
      out-of-data-space to write mode transition occurs.
      Reported-by: default avatarVivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Acked-by: default avatarJoe Thornber <ejt@redhat.com>
      Fixes: 2c43fd26 ("dm thin: fix missing out-of-data-space to write mode transition if blocks are released")
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      791620e8
    • Clemens Ladisch's avatar
      ALSA: usb-audio: work around CH345 input SysEx corruption · 8ff0d683
      Clemens Ladisch authored
      commit a91e627e upstream.
      
      One of the many faults of the QinHeng CH345 USB MIDI interface chip is
      that it does not handle received SysEx messages correctly -- every second
      event packet has a wrong code index number, which is the one from the last
      seen message, instead of 4.  For example, the two messages "FE F0 01 02 03
      04 05 06 07 08 09 0A 0B 0C 0D 0E F7" result in the following event
      packets:
      
      correct:       CH345:
      0F FE 00 00    0F FE 00 00
      04 F0 01 02    04 F0 01 02
      04 03 04 05    0F 03 04 05
      04 06 07 08    04 06 07 08
      04 09 0A 0B    0F 09 0A 0B
      04 0C 0D 0E    04 0C 0D 0E
      05 F7 00 00    05 F7 00 00
      
      A class-compliant driver must interpret an event packet with CIN 15 as
      having a single data byte, so the other two bytes would be ignored.  The
      message received by the host would then be missing two bytes out of six;
      in this example, "F0 01 02 03 06 07 08 09 0C 0D 0E F7".
      
      These corrupted SysEx event packages contain only data bytes, while the
      CH345 uses event packets with a correct CIN value only for messages with
      a status byte, so it is possible to distinguish between these two cases by
      checking for the presence of this status byte.
      
      (Other bugs in the CH345's input handling, such as the corruption resulting
      from running status, cannot be worked around.)
      Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      8ff0d683
    • Clemens Ladisch's avatar
      ALSA: usb-audio: prevent CH345 multiport output SysEx corruption · 88a85146
      Clemens Ladisch authored
      commit 1ca8b201 upstream.
      
      The CH345 USB MIDI chip has two output ports.  However, they are
      multiplexed through one pin, and the number of ports cannot be reduced
      even for hardware that implements only one connector, so for those
      devices, data sent to either port ends up on the same hardware output.
      This becomes a problem when both ports are used at the same time, as
      longer MIDI commands (such as SysEx messages) are likely to be
      interrupted by messages from the other port, and thus to get lost.
      
      It would not be possible for the driver to detect how many ports the
      device actually has, except that in practice, _all_ devices built with
      the CH345 have only one port.  So we can just ignore the device's
      descriptors, and hardcode one output port.
      Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      88a85146
    • Clemens Ladisch's avatar
    • Eric Sandeen's avatar
      xfs: allow inode allocations in post-growfs disk space · 168f9c1c
      Eric Sandeen authored
      commit 9de67c3b upstream.
      
      Today, if we perform an xfs_growfs which adds allocation groups,
      mp->m_maxagi is not properly updated when the growfs is complete.
      
      Therefore inodes will continue to be allocated only in the
      AGs which existed prior to the growfs, and the new space
      won't be utilized.
      
      This is because of this path in xfs_growfs_data_private():
      
      xfs_growfs_data_private
      	xfs_initialize_perag(mp, nagcount, &nagimax);
      		if (mp->m_flags & XFS_MOUNT_32BITINODES)
      			index = xfs_set_inode32(mp);
      		else
      			index = xfs_set_inode64(mp);
      
      		if (maxagi)
      			*maxagi = index;
      
      where xfs_set_inode* iterates over the (old) agcount in
      mp->m_sb.sb_agblocks, which has not yet been updated
      in the growfs path.  So "index" will be returned based on
      the old agcount, not the new one, and new AGs are not available
      for inode allocation.
      
      Fix this by explicitly passing the proper AG count (which
      xfs_initialize_perag() already has) down another level,
      so that xfs_set_inode* can make the proper decision about
      acceptable AGs for inode allocation in the potentially
      newly-added AGs.
      
      This has been broken since 3.7, when these two
      xfs_set_inode* functions were added in commit 2d2194f6.
      Prior to that, we looped over "agcount" not sb_agblocks
      in these calculations.
      Signed-off-by: default avatarEric Sandeen <sandeen@redhat.com>
      Reviewed-by: default avatarBrian Foster <bfoster@redhat.com>
      Signed-off-by: default avatarDave Chinner <david@fromorbit.com>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Acked-by: default avatarDave Chinner <david@fromorbit.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      168f9c1c
    • Eric Dumazet's avatar
      ipv6: sctp: implement sctp_v6_destroy_sock() · dc182470
      Eric Dumazet authored
      commit 602dd62d upstream.
      
      Dmitry Vyukov reported a memory leak using IPV6 SCTP sockets.
      
      We need to call inet6_destroy_sock() to properly release
      inet6 specific fields.
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      dc182470
    • Konstantin Khlebnikov's avatar
      net/neighbour: fix crash at dumping device-agnostic proxy entries · 883fab64
      Konstantin Khlebnikov authored
      commit 6adc5fd6 upstream.
      
      Proxy entries could have null pointer to net-device.
      Signed-off-by: default avatarKonstantin Khlebnikov <koct9i@gmail.com>
      Fixes: 84920c14 ("net: Allow ipv6 proxies and arp proxies be shown with iproute2")
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      883fab64
    • Eric Dumazet's avatar
      ipv6: add complete rcu protection around np->opt · 93d2f250
      Eric Dumazet authored
      commit 45f6fad8 upstream.
      
      This patch addresses multiple problems :
      
      UDP/RAW sendmsg() need to get a stable struct ipv6_txoptions
      while socket is not locked : Other threads can change np->opt
      concurrently. Dmitry posted a syzkaller
      (http://github.com/google/syzkaller) program desmonstrating
      use-after-free.
      
      Starting with TCP/DCCP lockless listeners, tcp_v6_syn_recv_sock()
      and dccp_v6_request_recv_sock() also need to use RCU protection
      to dereference np->opt once (before calling ipv6_dup_options())
      
      This patch adds full RCU protection to np->opt
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      93d2f250
    • Michal Kubeček's avatar
      ipv6: distinguish frag queues by device for multicast and link-local packets · 6aba289f
      Michal Kubeček authored
      commit 264640fc upstream.
      
      If a fragmented multicast packet is received on an ethernet device which
      has an active macvlan on top of it, each fragment is duplicated and
      received both on the underlying device and the macvlan. If some
      fragments for macvlan are processed before the whole packet for the
      underlying device is reassembled, the "overlapping fragments" test in
      ip6_frag_queue() discards the whole fragment queue.
      
      To resolve this, add device ifindex to the search key and require it to
      match reassembling multicast packets and packets to link-local
      addresses.
      
      Note: similar patch has been already submitted by Yoshifuji Hideaki in
      
        http://patchwork.ozlabs.org/patch/220979/
      
      but got lost and forgotten for some reason.
      Signed-off-by: default avatarMichal Kubecek <mkubecek@suse.cz>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6aba289f
    • Aaro Koskinen's avatar
      broadcom: fix PHY_ID_BCM5481 entry in the id table · 85c09e71
      Aaro Koskinen authored
      commit 3c25a860 upstream.
      
      Commit fcb26ec5 ("broadcom: move all PHY_ID's to header")
      updated broadcom_tbl to use PHY_IDs, but incorrectly replaced 0x0143bca0
      with PHY_ID_BCM5482 (making a duplicate entry, and completely omitting
      the original). Fix that.
      
      Fixes: fcb26ec5 ("broadcom: move all PHY_ID's to header")
      Signed-off-by: default avatarAaro Koskinen <aaro.koskinen@iki.fi>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      85c09e71
    • Nikolay Aleksandrov's avatar
      net: ip6mr: fix static mfc/dev leaks on table destruction · 658438d6
      Nikolay Aleksandrov authored
      commit 4c698046 upstream.
      
      Similar to ipv4, when destroying an mrt table the static mfc entries and
      the static devices are kept, which leads to devices that can never be
      destroyed (because of refcnt taken) and leaked memory. Make sure that
      everything is cleaned up on netns destruction.
      
      Fixes: 8229efda ("netns: ip6mr: enable namespace support in ipv6 multicast forwarding code")
      CC: Benjamin Thery <benjamin.thery@bull.net>
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarCong Wang <cwang@twopensource.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      658438d6
    • Nikolay Aleksandrov's avatar
      net: ipmr: fix static mfc/dev leaks on table destruction · 85425a88
      Nikolay Aleksandrov authored
      commit 0e615e96 upstream.
      
      When destroying an mrt table the static mfc entries and the static
      devices are kept, which leads to devices that can never be destroyed
      (because of refcnt taken) and leaked memory, for example:
      unreferenced object 0xffff880034c144c0 (size 192):
        comm "mfc-broken", pid 4777, jiffies 4320349055 (age 46001.964s)
        hex dump (first 32 bytes):
          98 53 f0 34 00 88 ff ff 98 53 f0 34 00 88 ff ff  .S.4.....S.4....
          ef 0a 0a 14 01 02 03 04 00 00 00 00 01 00 00 00  ................
        backtrace:
          [<ffffffff815c1b9e>] kmemleak_alloc+0x4e/0xb0
          [<ffffffff811ea6e0>] kmem_cache_alloc+0x190/0x300
          [<ffffffff815931cb>] ip_mroute_setsockopt+0x5cb/0x910
          [<ffffffff8153d575>] do_ip_setsockopt.isra.11+0x105/0xff0
          [<ffffffff8153e490>] ip_setsockopt+0x30/0xa0
          [<ffffffff81564e13>] raw_setsockopt+0x33/0x90
          [<ffffffff814d1e14>] sock_common_setsockopt+0x14/0x20
          [<ffffffff814d0b51>] SyS_setsockopt+0x71/0xc0
          [<ffffffff815cdbf6>] entry_SYSCALL_64_fastpath+0x16/0x7a
          [<ffffffffffffffff>] 0xffffffffffffffff
      
      Make sure that everything is cleaned on netns destruction.
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@cumulusnetworks.com>
      Reviewed-by: default avatarCong Wang <cwang@twopensource.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      85425a88
    • Daniel Borkmann's avatar
      net, scm: fix PaX detected msg_controllen overflow in scm_detach_fds · 2a441c03
      Daniel Borkmann authored
      commit 6900317f upstream.
      
      David and HacKurx reported a following/similar size overflow triggered
      in a grsecurity kernel, thanks to PaX's gcc size overflow plugin:
      
      (Already fixed in later grsecurity versions by Brad and PaX Team.)
      
      [ 1002.296137] PAX: size overflow detected in function scm_detach_fds net/core/scm.c:314
                     cicus.202_127 min, count: 4, decl: msg_controllen; num: 0; context: msghdr;
      [ 1002.296145] CPU: 0 PID: 3685 Comm: scm_rights_recv Not tainted 4.2.3-grsec+ #7
      [ 1002.296149] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, [...]
      [ 1002.296153]  ffffffff81c27366 0000000000000000 ffffffff81c27375 ffffc90007843aa8
      [ 1002.296162]  ffffffff818129ba 0000000000000000 ffffffff81c27366 ffffc90007843ad8
      [ 1002.296169]  ffffffff8121f838 fffffffffffffffc fffffffffffffffc ffffc90007843e60
      [ 1002.296176] Call Trace:
      [ 1002.296190]  [<ffffffff818129ba>] dump_stack+0x45/0x57
      [ 1002.296200]  [<ffffffff8121f838>] report_size_overflow+0x38/0x60
      [ 1002.296209]  [<ffffffff816a979e>] scm_detach_fds+0x2ce/0x300
      [ 1002.296220]  [<ffffffff81791899>] unix_stream_read_generic+0x609/0x930
      [ 1002.296228]  [<ffffffff81791c9f>] unix_stream_recvmsg+0x4f/0x60
      [ 1002.296236]  [<ffffffff8178dc00>] ? unix_set_peek_off+0x50/0x50
      [ 1002.296243]  [<ffffffff8168fac7>] sock_recvmsg+0x47/0x60
      [ 1002.296248]  [<ffffffff81691522>] ___sys_recvmsg+0xe2/0x1e0
      [ 1002.296257]  [<ffffffff81693496>] __sys_recvmsg+0x46/0x80
      [ 1002.296263]  [<ffffffff816934fc>] SyS_recvmsg+0x2c/0x40
      [ 1002.296271]  [<ffffffff8181a3ab>] entry_SYSCALL_64_fastpath+0x12/0x85
      
      Further investigation showed that this can happen when an *odd* number of
      fds are being passed over AF_UNIX sockets.
      
      In these cases CMSG_LEN(i * sizeof(int)) and CMSG_SPACE(i * sizeof(int)),
      where i is the number of successfully passed fds, differ by 4 bytes due
      to the extra CMSG_ALIGN() padding in CMSG_SPACE() to an 8 byte boundary
      on 64 bit. The padding is used to align subsequent cmsg headers in the
      control buffer.
      
      When the control buffer passed in from the receiver side *lacks* these 4
      bytes (e.g. due to buggy/wrong API usage), then msg->msg_controllen will
      overflow in scm_detach_fds():
      
        int cmlen = CMSG_LEN(i * sizeof(int));  <--- cmlen w/o tail-padding
        err = put_user(SOL_SOCKET, &cm->cmsg_level);
        if (!err)
          err = put_user(SCM_RIGHTS, &cm->cmsg_type);
        if (!err)
          err = put_user(cmlen, &cm->cmsg_len);
        if (!err) {
          cmlen = CMSG_SPACE(i * sizeof(int));  <--- cmlen w/ 4 byte extra tail-padding
          msg->msg_control += cmlen;
          msg->msg_controllen -= cmlen;         <--- iff no tail-padding space here ...
        }                                            ... wrap-around
      
      F.e. it will wrap to a length of 18446744073709551612 bytes in case the
      receiver passed in msg->msg_controllen of 20 bytes, and the sender
      properly transferred 1 fd to the receiver, so that its CMSG_LEN results
      in 20 bytes and CMSG_SPACE in 24 bytes.
      
      In case of MSG_CMSG_COMPAT (scm_detach_fds_compat()), I haven't seen an
      issue in my tests as alignment seems always on 4 byte boundary. Same
      should be in case of native 32 bit, where we end up with 4 byte boundaries
      as well.
      
      In practice, passing msg->msg_controllen of 20 to recvmsg() while receiving
      a single fd would mean that on successful return, msg->msg_controllen is
      being set by the kernel to 24 bytes instead, thus more than the input
      buffer advertised. It could f.e. become an issue if such application later
      on zeroes or copies the control buffer based on the returned msg->msg_controllen
      elsewhere.
      
      Maximum number of fds we can send is a hard upper limit SCM_MAX_FD (253).
      
      Going over the code, it seems like msg->msg_controllen is not being read
      after scm_detach_fds() in scm_recv() anymore by the kernel, good!
      
      Relevant recvmsg() handler are unix_dgram_recvmsg() (unix_seqpacket_recvmsg())
      and unix_stream_recvmsg(). Both return back to their recvmsg() caller,
      and ___sys_recvmsg() places the updated length, that is, new msg_control -
      old msg_control pointer into msg->msg_controllen (hence the 24 bytes seen
      in the example).
      
      Long time ago, Wei Yongjun fixed something related in commit 1ac70e7a
      ("[NET]: Fix function put_cmsg() which may cause usr application memory
      overflow").
      
      RFC3542, section 20.2. says:
      
        The fields shown as "XX" are possible padding, between the cmsghdr
        structure and the data, and between the data and the next cmsghdr
        structure, if required by the implementation. While sending an
        application may or may not include padding at the end of last
        ancillary data in msg_controllen and implementations must accept both
        as valid. On receiving a portable application must provide space for
        padding at the end of the last ancillary data as implementations may
        copy out the padding at the end of the control message buffer and
        include it in the received msg_controllen. When recvmsg() is called
        if msg_controllen is too small for all the ancillary data items
        including any trailing padding after the last item an implementation
        may set MSG_CTRUNC.
      
      Since we didn't place MSG_CTRUNC for already quite a long time, just do
      the same as in 1ac70e7a to avoid an overflow.
      
      Btw, even man-page author got this wrong :/ See db939c9b26e9 ("cmsg.3: Fix
      error in SCM_RIGHTS code sample"). Some people must have copied this (?),
      thus it got triggered in the wild (reported several times during boot by
      David and HacKurx).
      
      No Fixes tag this time as pre 2002 (that is, pre history tree).
      Reported-by: default avatarDavid Sterba <dave@jikos.cz>
      Reported-by: default avatarHacKurx <hackurx@gmail.com>
      Cc: PaX Team <pageexec@freemail.hu>
      Cc: Emese Revfy <re.emese@gmail.com>
      Cc: Brad Spengler <spender@grsecurity.net>
      Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
      Cc: Eric Dumazet <edumazet@google.com>
      Reviewed-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      2a441c03
    • Eric Dumazet's avatar
      tcp: initialize tp->copied_seq in case of cross SYN connection · 9a81e0e1
      Eric Dumazet authored
      commit 142a2e7e upstream.
      
      Dmitry provided a syzkaller (http://github.com/google/syzkaller)
      generated program that triggers the WARNING at
      net/ipv4/tcp.c:1729 in tcp_recvmsg() :
      
      WARN_ON(tp->copied_seq != tp->rcv_nxt &&
              !(flags & (MSG_PEEK | MSG_TRUNC)));
      
      His program is specifically attempting a Cross SYN TCP exchange,
      that we support (for the pleasure of hackers ?), but it looks we
      lack proper tcp->copied_seq initialization.
      
      Thanks again Dmitry for your report and testings.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9a81e0e1
    • Eric Dumazet's avatar
      tcp: md5: fix lockdep annotation · d230c3a0
      Eric Dumazet authored
      commit 1b8e6a01 upstream.
      
      When a passive TCP is created, we eventually call tcp_md5_do_add()
      with sk pointing to the child. It is not owner by the user yet (we
      will add this socket into listener accept queue a bit later anyway)
      
      But we do own the spinlock, so amend the lockdep annotation to avoid
      following splat :
      
      [ 8451.090932] net/ipv4/tcp_ipv4.c:923 suspicious rcu_dereference_protected() usage!
      [ 8451.090932]
      [ 8451.090932] other info that might help us debug this:
      [ 8451.090932]
      [ 8451.090934]
      [ 8451.090934] rcu_scheduler_active = 1, debug_locks = 1
      [ 8451.090936] 3 locks held by socket_sockopt_/214795:
      [ 8451.090936]  #0:  (rcu_read_lock){.+.+..}, at: [<ffffffff855c6ac1>] __netif_receive_skb_core+0x151/0xe90
      [ 8451.090947]  #1:  (rcu_read_lock){.+.+..}, at: [<ffffffff85618143>] ip_local_deliver_finish+0x43/0x2b0
      [ 8451.090952]  #2:  (slock-AF_INET){+.-...}, at: [<ffffffff855acda5>] sk_clone_lock+0x1c5/0x500
      [ 8451.090958]
      [ 8451.090958] stack backtrace:
      [ 8451.090960] CPU: 7 PID: 214795 Comm: socket_sockopt_
      
      [ 8451.091215] Call Trace:
      [ 8451.091216]  <IRQ>  [<ffffffff856fb29c>] dump_stack+0x55/0x76
      [ 8451.091229]  [<ffffffff85123b5b>] lockdep_rcu_suspicious+0xeb/0x110
      [ 8451.091235]  [<ffffffff8564544f>] tcp_md5_do_add+0x1bf/0x1e0
      [ 8451.091239]  [<ffffffff85645751>] tcp_v4_syn_recv_sock+0x1f1/0x4c0
      [ 8451.091242]  [<ffffffff85642b27>] ? tcp_v4_md5_hash_skb+0x167/0x190
      [ 8451.091246]  [<ffffffff85647c78>] tcp_check_req+0x3c8/0x500
      [ 8451.091249]  [<ffffffff856451ae>] ? tcp_v4_inbound_md5_hash+0x11e/0x190
      [ 8451.091253]  [<ffffffff85647170>] tcp_v4_rcv+0x3c0/0x9f0
      [ 8451.091256]  [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0
      [ 8451.091260]  [<ffffffff856181b6>] ip_local_deliver_finish+0xb6/0x2b0
      [ 8451.091263]  [<ffffffff85618143>] ? ip_local_deliver_finish+0x43/0x2b0
      [ 8451.091267]  [<ffffffff85618d38>] ip_local_deliver+0x48/0x80
      [ 8451.091270]  [<ffffffff85618510>] ip_rcv_finish+0x160/0x700
      [ 8451.091273]  [<ffffffff8561900e>] ip_rcv+0x29e/0x3d0
      [ 8451.091277]  [<ffffffff855c74b7>] __netif_receive_skb_core+0xb47/0xe90
      
      Fixes: a8afca03 ("tcp: md5: protects md5sig_info with RCU")
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Reported-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      d230c3a0
    • Bjørn Mork's avatar
      net: qmi_wwan: add XS Stick W100-2 from 4G Systems · 98296e85
      Bjørn Mork authored
      commit 68242a5a upstream.
      
      Thomas reports
      "
      4gsystems sells two total different LTE-surfsticks under the same name.
      ..
      The newer version of XS Stick W100 is from "omega"
      ..
      Under windows the driver switches to the same ID, and uses MI03\6 for
      network and MI01\6 for modem.
      ..
      echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id
      echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id
      
      T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
      D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
      P:  Vendor=1c9e ProdID=9b01 Rev=02.32
      S:  Manufacturer=USB Modem
      S:  Product=USB Modem
      S:  SerialNumber=
      C:  #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA
      I:  If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
      I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
      I:  If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
      
      Now all important things are there:
      
      wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at)
      
      There is also ttyUSB0, but it is not usable, at least not for at.
      
      The device works well with qmi and ModemManager-NetworkManager.
      "
      Reported-by: default avatarThomas Schäfer <tschaefer@t-online.de>
      Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      98296e85
    • Neil Horman's avatar
      snmp: Remove duplicate OUTMCAST stat increment · 427aad52
      Neil Horman authored
      commit 41033f02 upstream.
      
      the OUTMCAST stat is double incremented, getting bumped once in the mcast code
      itself, and again in the common ip output path.  Remove the mcast bump, as its
      not needed
      
      Validated by the reporter, with good results
      Signed-off-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Reported-by: default avatarClaus Jensen <claus.jensen@microsemi.com>
      CC: Claus Jensen <claus.jensen@microsemi.com>
      CC: David Miller <davem@davemloft.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      427aad52
    • Jason A. Donenfeld's avatar
      ip_tunnel: disable preemption when updating per-cpu tstats · 8625b2f8
      Jason A. Donenfeld authored
      commit b4fe85f9 upstream.
      
      Drivers like vxlan use the recently introduced
      udp_tunnel_xmit_skb/udp_tunnel6_xmit_skb APIs. udp_tunnel6_xmit_skb
      makes use of ip6tunnel_xmit, and ip6tunnel_xmit, after sending the
      packet, updates the struct stats using the usual
      u64_stats_update_begin/end calls on this_cpu_ptr(dev->tstats).
      udp_tunnel_xmit_skb makes use of iptunnel_xmit, which doesn't touch
      tstats, so drivers like vxlan, immediately after, call
      iptunnel_xmit_stats, which does the same thing - calls
      u64_stats_update_begin/end on this_cpu_ptr(dev->tstats).
      
      While vxlan is probably fine (I don't know?), calling a similar function
      from, say, an unbound workqueue, on a fully preemptable kernel causes
      real issues:
      
      [  188.434537] BUG: using smp_processor_id() in preemptible [00000000] code: kworker/u8:0/6
      [  188.435579] caller is debug_smp_processor_id+0x17/0x20
      [  188.435583] CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.2.6 #2
      [  188.435607] Call Trace:
      [  188.435611]  [<ffffffff8234e936>] dump_stack+0x4f/0x7b
      [  188.435615]  [<ffffffff81915f3d>] check_preemption_disabled+0x19d/0x1c0
      [  188.435619]  [<ffffffff81915f77>] debug_smp_processor_id+0x17/0x20
      
      The solution would be to protect the whole
      this_cpu_ptr(dev->tstats)/u64_stats_update_begin/end blocks with
      disabling preemption and then reenabling it.
      Signed-off-by: default avatarJason A. Donenfeld <Jason@zx2c4.com>
      Acked-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      8625b2f8
    • Daniel Borkmann's avatar
      packet: infer protocol from ethernet header if unset · d9850f8e
      Daniel Borkmann authored
      commit c72219b7 upstream.
      
      In case no struct sockaddr_ll has been passed to packet
      socket's sendmsg() when doing a TX_RING flush run, then
      skb->protocol is set to po->num instead, which is the protocol
      passed via socket(2)/bind(2).
      
      Applications only xmitting can go the path of allocating the
      socket as socket(PF_PACKET, <mode>, 0) and do a bind(2) on the
      TX_RING with sll_protocol of 0. That way, register_prot_hook()
      is neither called on creation nor on bind time, which saves
      cycles when there's no interest in capturing anyway.
      
      That leaves us however with po->num 0 instead and therefore
      the TX_RING flush run sets skb->protocol to 0 as well. Eric
      reported that this leads to problems when using tools like
      trafgen over bonding device. I.e. the bonding's hash function
      could invoke the kernel's flow dissector, which depends on
      skb->protocol being properly set. In the current situation, all
      the traffic is then directed to a single slave.
      
      Fix it up by inferring skb->protocol from the Ethernet header
      when not set and we have ARPHRD_ETHER device type. This is only
      done in case of SOCK_RAW and where we have a dev->hard_header_len
      length. In case of ARPHRD_ETHER devices, this is guaranteed to
      cover ETH_HLEN, and therefore being accessed on the skb after
      the skb_store_bits().
      Reported-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      d9850f8e
    • Daniel Borkmann's avatar
      packet: always probe for transport header · 66a74d96
      Daniel Borkmann authored
      commit 8fd6c80d upstream.
      
      We concluded that the skb_probe_transport_header() should better be
      called unconditionally. Avoiding the call into the flow dissector has
      also not really much to do with the direct xmit mode.
      
      While it seems that only virtio_net code makes use of GSO from non
      RX/TX ring packet socket paths, we should probe for a transport header
      nevertheless before they hit devices.
      
      Reference: http://thread.gmane.org/gmane.linux.network/386173/Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Acked-by: default avatarJason Wang <jasowang@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      66a74d96
    • Rainer Weikusat's avatar
      unix: avoid use-after-free in ep_remove_wait_queue · 6e238517
      Rainer Weikusat authored
      commit 7d267278 upstream.
      
      Rainer Weikusat <rweikusat@mobileactivedefense.com> writes:
      An AF_UNIX datagram socket being the client in an n:1 association with
      some server socket is only allowed to send messages to the server if the
      receive queue of this socket contains at most sk_max_ack_backlog
      datagrams. This implies that prospective writers might be forced to go
      to sleep despite none of the message presently enqueued on the server
      receive queue were sent by them. In order to ensure that these will be
      woken up once space becomes again available, the present unix_dgram_poll
      routine does a second sock_poll_wait call with the peer_wait wait queue
      of the server socket as queue argument (unix_dgram_recvmsg does a wake
      up on this queue after a datagram was received). This is inherently
      problematic because the server socket is only guaranteed to remain alive
      for as long as the client still holds a reference to it. In case the
      connection is dissolved via connect or by the dead peer detection logic
      in unix_dgram_sendmsg, the server socket may be freed despite "the
      polling mechanism" (in particular, epoll) still has a pointer to the
      corresponding peer_wait queue. There's no way to forcibly deregister a
      wait queue with epoll.
      
      Based on an idea by Jason Baron, the patch below changes the code such
      that a wait_queue_t belonging to the client socket is enqueued on the
      peer_wait queue of the server whenever the peer receive queue full
      condition is detected by either a sendmsg or a poll. A wake up on the
      peer queue is then relayed to the ordinary wait queue of the client
      socket via wake function. The connection to the peer wait queue is again
      dissolved if either a wake up is about to be relayed or the client
      socket reconnects or a dead peer is detected or the client socket is
      itself closed. This enables removing the second sock_poll_wait from
      unix_dgram_poll, thus avoiding the use-after-free, while still ensuring
      that no blocked writer sleeps forever.
      Signed-off-by: default avatarRainer Weikusat <rweikusat@mobileactivedefense.com>
      Fixes: ec0d215f ("af_unix: fix 'poll for write'/connected DGRAM sockets")
      Reviewed-by: default avatarJason Baron <jbaron@akamai.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      [ luis: backported to 3.16: adjusted context ]
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      6e238517
    • Vineet Gupta's avatar
      ARC: Fix silly typo in MAINTAINERS file · c55d12c7
      Vineet Gupta authored
      commit 30b9dbee upstream.
      
      Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      c55d12c7
    • Sabrina Dubroca's avatar
      macvlan: fix leak in macvlan_handle_frame · 9d21c832
      Sabrina Dubroca authored
      commit e639b8d8 upstream.
      
      Reset pskb in macvlan_handle_frame in case skb_share_check returned a
      clone.
      
      Fixes: 8a4eb573 ("net: introduce rx_handler results and logic around that")
      Signed-off-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      9d21c832
    • Geert Uytterhoeven's avatar
      FS-Cache: Add missing initialization of ret in cachefiles_write_page() · 7ccbbcd1
      Geert Uytterhoeven authored
      commit cf897526 upstream.
      
      fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’:
      fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in
      this function
      
      If the jump to label "error" is taken, "ret" will indeed be
      uninitialized, and random stack data may be printed by the debug code.
      
      Fixes: 102f4d90 ("FS-Cache: Handle a write to the page immediately beyond the EOF marker")
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: default avatarLuis Henriques <luis.henriques@canonical.com>
      7ccbbcd1
  2. 14 Dec, 2015 12 commits