- 27 Aug, 2011 40 commits
-
-
Manish Rangankar authored
Add scsi_transport_iscsi hooks in qla4xxx to support iSCSI session management using iscsiadm. This patch is based on discussion here http://groups.google.com/group/open-iscsi/browse_thread/thread/e89fd888baf656a0# Now users can use iscsiadm to do target discovery and do login/logout to individual targets using the qla4xxx iSCSI class interface. This patch leaves some dead code, but to make it easier to review we are leaving and in the next patch we will remove that old code. V2 - NOTE: Added code to avoid waiting for AEN during login/logout in the driver, instead added a kernel to user event to notify iscsid about login status. Because of this iscsid will not get blocked. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Manish Rangankar authored
[SCSI] scsi_transport_iscsi: Add conn login, kernel to user, event to support offload session login. Offload drivers like qla4xxx will offload the sending of the login/logout pdus still, so this patch adds iscsi_conn_login_event which is used by these types of drivers to notify userspace that the connection has changed state. It also adds a iscsi_is_session_online helper so the lld can query the sessions state field. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
This patch adds bsg support to qla4xxx. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
This patch adds bsg support to the iscsi class. There is only 1 request, the host vendor one, supported. It is expected that this would be used for things like flash updates. This patch is made over this one http://marc.info/?l=linux-scsi&m=131149780020992&w=2Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Add support to set VLAN and show vlan settings in sysfs Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> [Patch updated to new defines] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
libiscsi does not support markers and if someone tries to set them the driver does a BUG(). There is not need to be that extreme. Just return -ENOSYS. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
Add support to set vlan priority and enable/disble a vlan. Patch based on code from Vikas Chaudhary. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
iscsi_session_to_shost is a macro around dev_to_shost which returns a Scsi_Host so there is no need to cast. iscsi_session_to_shost is a macro around shost_priv which returns a void pointer so no need to cast. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's host attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
We can replace the iface param mask with the attr_is_visible callback. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's session attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and drivers to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
Add support for default ipv4 and ipv6 ifaces in qla4xxx. Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Reviewed-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com> [make iface creation dynamic] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
A iscsi host can have multiple interfaces. This patch adds a new iface iscsi class for this. It exports the network settings now, and will be extended to also export iscsi initiator port settings like the isid and initiator name for drivers that can support multiple initiator ports. Based on patch from Lalit Chandivade. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Vikas Chaudhary authored
- Move all ipaddress related param to "struct ipaddress_config" from "struct scsi_qla_host" - update function - qla4xxx_update_local_ip() - Rename IPOPT_IPv4_PROTOCOL_ENABLE to IPOPT_IPV4_PROTOCOL_ENABLE Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> [update for new ISCSI_IFACE values] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
Allows user space (iscsiadm) to send down network configuration parameters for LLD to set private network configuration on the iSCSI adapters. Based on patches from Vikas Chaudhary. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Mike Christie authored
Allows user space (iscsiadm) to send down network configuration parameters for LLD to set private network configuration on the iSCSI adapters. Based on patch from Lalit Chandivade. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Anton Blanchard authored
During kdump testing I noticed timeouts when initialising each IPR adapter. While the driver has logic to detect an adapter in an indeterminate state, it wasn't triggering and each adapter went through a 5 minute timeout before finally going operational. Some analysis showed the needs_hard_reset flag wasn't getting set. We can check the reset_devices kernel parameter which is set by kdump and force a full reset. This fixes the problem. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
kashyap.desai@lsi.com authored
[Resend patch as per Bernd Schubert comment ] Issue: Device goes offline while doing aggressive HBA reset along with IO using some utility. Root cause: FW goes into bad state due to aggressive reset. Softreset does not help to recover FW. And also aggressive reset open up the window for Error handling thread to kicked off at the same time HBA will be in constant RESET loop as part of aggressive reset test case can lead Device to goes offline. Changes: 1. Added extra check as below inside eh_timed_out call back as below. if(ioc->ioc_reset_in_progress) Rc = EH_TIMER_RESET 2. Removed " DOORBELL_ACTIVE" check for SAS controller from task management context. Since SAS controller uses high priority queue for task management. This check is not required for SAS controller. 3. Moved SoftReset call to HardReset from Task Mgmt context. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
This patch adds a validation step before allowing creation of a new NPIV port. It checks whether the WWPN passed for the new NPIV port to be created is unique for the given physical port. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
bnx2x driver would obtain the WWNN/WWPN from the shared memory and can be obtained by the bnx2fc driver via ndo_fcoe_get_wwn. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Export fcoe_get_wwn, fcoe_validate_vport_create and fcoe_wwn_to_str so that all LLDs can use these common function. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
As an initiator, driver need not handle incoming ABTS. It initiates an ABTS if any IO requests time out. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
- Free session resources before rport logoff - Do not free session resources in bnx2fc_alloc_session_resc() as it is handled in caller's error handling path. - Do not call bnx2fc_free_session_resc() if bnx2fc_init_tgt() fails as cq_lock is not yet initialized. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
There exists a race condition between CQ doorbell unmap and IO completion path that arms the CQ which causes a NULL dereference. Protect the ctx_base with cq_lock to avoid this. Also, wait for the CQ doorbell to be successfully mapped before arming the CQ. Also, do not count uncolicited CQ completions for free_sqes. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
During the unsolicited LOGO processing, the session is uploaded and offloaded after the relogin is complete. In between any new IOs are errored back as the upload completion flag is set. Upon exhausting the retry count, the application fails the IOs. Return target busy for all the cases when session is not ready. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
CFC_DELETE is issued 2 secs after CONN_TERM is completed. If the session is uploaded and offloaded immediately, it has to wait for the connection id to be available. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Since this flag was never cleared, the driver does not wait for firmware destroy completions, causing missed KCQEs. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Since the driver holds the reference for vlan netdev, the reference has to be released by the driver when the vlan device is removed. Driver handles this in NETDEV_UNREGISTER event. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Move interface specific cleanup functionality to from bnx2fc_if_destroy to bnx2fc_interface_cleanup. Do not access interface/hba in bnx2fc_if_destroy as by the time this function is called interface may already be destroyed. This patch is in preparation to handle NETDEV_UNREGISTER on a vlan device. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Change them to bnx2fc_interface_setup/bnx2fc_interface_cleanup in preperation for the patches to follow. Interface specific cleanup functionality will be moved to bnx2fc_interface_cleanup. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
When NPIV ports are created/deleted rapidly there is a race condition between bnx2fc_vport_destroy() from sysfs and bnx2fc_flogi_resp(), which could try to delete the NPIV port from the list twice. Fix is to loop through the list of NPIV ports to find a match, and only when it exists remove it. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
During sequence cleanup, an additional reference for an IO has been taken. Because of this, the IO is never released into the free list. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Look up p->work_list to process cq completions, and correct the error check for thread creation. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
Bhanu Prakash Gollapudi authored
Reset max receive frame size every time before attempting FLOGI. Without this, the stale MFS value will be used. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
kashyap.desai@lsi.com authored
mpt2sas_base_detach() call was removed from _scsih_remove() while doing some code shuffling. Mainly when we work on adding code for scsih_shutdown(). I have added back mpt2sas_base_detach() which will get callled from _scsih_remove(). Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
kashyap.desai@lsi.com authored
Upgrade version string. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-
kashyap.desai@lsi.com authored
Driver will now schedule MPI event using "delay_work_queue_on" to specify same CPU to be used to schedule work. Earlier it used "delay_work_queue" which can cause migration of work due to kernel' timer migration feature. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
-