Skip to content

L
linux
Switch branch/tag
  1. 30 Jun, 2017 1 commit
  3. 23 Jun, 2017 1 commit
  5. 22 Jun, 2017 1 commit
    • Krzysztof Kozlowski's avatar
      clk: samsung: audss: Fix silent hang on Exynos4412 due to disabled EPLL · 5bb4053b
      Krzysztof Kozlowski authored 
      Similarly to commit f1e9203e ("clk: samsung: Fix Exynos 5420 pinctrl
setup and clock disable failure due to domain being gated") for
Exynos5420, the Exynos4412 also requires that EPLL is not disabled.
Otherwise any access to MAUDIO block will silently halt.

This was not visible before because EPLL on Exynos4 could not be
disabled before commit 6edfa11c ("clk: samsung:
Add enable/disable operation for PLL36XX clocks").  After this commit,
on Odroid U3 board one can see silent hang, usually with last (but
unrelated) messages:

	[    2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0
	[    2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci
	[    2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653)

Mark Exynos4 variant as also needed EPLL to be enabled all the time.
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      5bb4053b
  7. 21 Jun, 2017 4 commits
  9. 20 Jun, 2017 20 commits
  11. 19 Jun, 2017 4 commits
    • Leo Yan's avatar
      clk: Hi3660: register fixed_rate_clks with CLK_OF_DECLARE_DRIVER · a925810f
      Leo Yan authored 
      The timer will register into system at very early phase at kernel boot;
if timer needs to use clock, the clock should be get ready in function
of_clk_init() so later the timer driver probe can retrieve clock
successfully. This is finished in below flow on arm64:

  start_kernel()
    `-> time_init()
          `-> of_clk_init(NULL)    => register timer's clock
          `-> clocksource_probe()  => register timer

On Hi3660 the sp804 timer uses clock "osc32k", this clock is registered
as platform driver rather than CLK_OF_DECLARE_DRIVER method. As result,
sp804 timer probe returns failure due if cannot bind clock properly.

To fix the failure, this patch is to split crgctrl clocks into two
subsets. One part is for fixed_rate_clks which includes pre-defined
fixed rate clocks, and "osc32k" clock is in this category; So we change
their registration to CLK_OF_DECLARE_DRIVER method, as result the clocks
can be registered ahead with function of_clk_init() and timer driver can
bind timer clock successfully; the rest of the crgctrl clocks are still
registered by the probe of the platform driver.

This patch also adds checking for all crgctrl clocks registration and
print out log if any clock has failure.
Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      a925810f
    • Konstantin Porotchkin's avatar
      clk: mvebu: cp110: add sdio clock to cp-110 system controller · a45af6d3
      Konstantin Porotchkin authored 
      This commit updates the CP110 system controller driver to add the
definition for a missing clock.

The SDIO clock is dedicated driving the SDHCI interface and its frequency
is 400MHz (2/5 of PLL source clock).

The SDIO interface should be bound to this clock and not the core clock
as in the older code.
Using the wrong clock lead to a maximum SDHCI frequency of 250 Mhz, while
the HW really supports up to 400 Mhz.

This patch also fixes the NAND clock relationship documentation.
Signed-off-by: default avatarKonstantin Porotchkin <kostap@marvell.com>
[gregory.clement@free-electrons.com:
- use sdio instead of emmc to name the clock]
Reviewed-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      a45af6d3
    • Gregory CLEMENT's avatar
      clk: mvebu: cp110: introduce a new binding · 5ffeb5f5
      Gregory CLEMENT authored 
      The initial intent when the binding of the cp110 system controller was to
have one flat node. The idea being that what is currently a clock-only
driver in drivers would become a MFD driver, exposing the clock, GPIO and
pinctrl functionality. However, after taking a step back, this would lead
to a messy binding. Indeed, a single node would be a GPIO controller,
clock controller, pinmux controller, and more.

This patch adopts a more classical solution of a top-level syscon node
with sub-nodes for the individual devices. The main benefit will be to
have each functional block associated to its own sub-node where we can
put its own properties.

The introduction of the Armada 7K/8K is still in the early stage so the
plan is to remove the old binding. However, we don't want to break the
device tree compatibility for the few devices already in the field. For
this we still keep the support of the legacy compatible string with a big
warning in the kernel about updating the device tree.
Reviewed-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      5ffeb5f5
    • Gregory CLEMENT's avatar
      clk: mvebu: cp110: do not depend anymore of the *-clock-output-names · f5667274
      Gregory CLEMENT authored 
      Using the *-clock-output-names property was a convenient way to have a
unique name for each clock even when there are multiple cp110 blocks
as we can find on Armada 8K.

However it has some drawbacks: the main one being a stronger link than
necessary between the driver and the device tree. For example the clock
name can't be changed, removed or moved. It is still the early stage of
introduction of the Armada 7K/8K and the hardware is still not totally
documented, especially for the clock part. By removing the use of
*-clock-output-names it will be easier to add new clocks without breaking
the compatibility.

The name of each clock is now created by using its physical address as a
prefix (as it was done for the platform device names). Thanks to this we
have an automatic way to compute a unique name.
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
      f5667274
  13. 16 Jun, 2017 6 commits
  15. 15 Jun, 2017 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7