- 09 Aug, 2022 2 commits
-
-
Gerhard Engleder authored
If tsnep_tx_map() fails, then tsnep_tx_unmap() shall start at the write index like tsnep_tx_map(). This is different to the normal operation. Thus, add an additional parameter to tsnep_tx_unmap() to enable start at different positions for successful TX and failed TX. Fixes: 403f69bb ("tsnep: Add TSN endpoint Ethernet MAC driver") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gerhard Engleder authored
Kernel test robot found the following warning: drivers/net/ethernet/engleder/tsnep_main.c:1254:34: warning: 'tsnep_of_match' defined but not used [-Wunused-const-variable=] of_match_ptr() compiles into NULL if CONFIG_OF is disabled. tsnep_of_match exists always so use of of_match_ptr() is useless. Fix warning by dropping of_match_ptr(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 08 Aug, 2022 2 commits
-
-
Gao Feng authored
The commit d1361840 ("tcp: fix SO_RCVLOWAT and RCVBUF autotuning") add one new (struct proto_ops)->set_rcvlowat method so that a protocol can override the default setsockopt(SO_RCVLOWAT) behavior. The prior bpf codes don't check and invoke the protos's set_rcvlowat, now correct it. Signed-off-by: Gao Feng <gfree.wind@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xuan Zhuo authored
When we call xdp_convert_buff_to_frame() to get xdpf, if it returns NULL, we should check if xdp_page was allocated by xdp_linearize_page(). If it is newly allocated, it should be freed here alone. Just like any other "goto err_xdp". Fixes: 44fa2dbd ("xdp: transition into using xdp_frame for ndo_xdp_xmit") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Aug, 2022 16 commits
-
-
Nick Desaulniers authored
Fixes the following warnings observed when building CONFIG_IPV6_SEG6_LWTUNNEL=y with clang: net/ipv6/seg6_local.o: warning: objtool: seg6_local_fill_encap() falls through to next function seg6_local_get_encap_size() net/ipv6/seg6_local.o: warning: objtool: seg6_local_cmp_encap() falls through to next function input_action_end() LLVM can fully unroll loops in seg6_local_get_encap_size() and seg6_local_cmp_encap(). One issue in those loops is that the induction variable is initialized to 0. The loop iterates over members of seg6_action_params, a global array of struct seg6_action_param calling their put() function pointer members. seg6_action_param uses an array initializer to initialize SEG6_LOCAL_SRH and later elements, which is the third enumeration of an anonymous union. The guard `if (attrs & SEG6_F_ATTR(i))` may prevent this from being called at runtime, but it would still be UB for `seg6_action_params[0]->put` to be called; the unrolled loop will make the initial iterations unreachable, which LLVM will later rotate to fallthrough to the next function. Make this more obvious that this cannot happen to the compiler by initializing the loop induction variable to the minimum valid index that seg6_action_params is initialized to. Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220802161203.622293-1-ndesaulniers@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The GENET driver essentially does exactly what mdio_bus_phy_resume() does by calling phy_init_hw() plus phy_resume(). Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220804173605.1266574-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
The text was copy&pasted from Intel, adjust it to say Wangxun. Reported-by: Ingo Saitz <ingo@hannover.ccc.de> Fixes: 3ce7547e ("net: txgbe: Add build support for txgbe") Link: https://lore.kernel.org/r/20220804182641.1442000-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Francois Romieu authored
rose /proc code does not serialize timer accesses. Initial report by Bernard F6BVP Pidoux exhibits overflow amounting to 116 ticks on its HZ=250 system. Full timer access serialization would imho be overkill as rose /proc does not enforce consistency between displayed ROSE_STATE_XYZ and timer values during changes of state. The patch may also fix similar behavior in ax25 /proc, ax25 ioctl and netrom /proc as they all exhibit the same timer serialization policy. This point has not been reported though. The sole remaining use of ax25_display_timer - ax25 rtt valuation - may also perform marginally better but I have not analyzed it too deeply. Cc: Thomas DL9SAU Osterried <thomas@osterried.de> Link: https://lore.kernel.org/all/d5e93cc7-a91f-13d3-49a1-b50c11f0f811@free.fr/Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Bernard Pidoux <f6bvp@free.fr> Link: https://lore.kernel.org/r/Yuk9vq7t7VhmnOXu@electric-eye.fr.zoreil.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Naveen Mamindlapalli authored
For packets scheduled to RPM and LBK, NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] selects the TL3 or TL2 scheduling level as the one used for link/channel selection and backpressure. For each scheduling queue at the selected level: Setting NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG[ENA] = 1 allows the TL3/TL2 queue to schedule packets to a specified RPM or LBK link and channel. There is an issue in the code where NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] is set to TL3 where as the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG is configured for TL2 queue in some cases. As a result packets will not transmit on that link/channel. This patch fixes the issue by configuring the NIX_AF_TL3_TL2(0..255)_LINK(0..12)_CFG register depending on the NIX_AF_PSE_CHANNEL_LEVEL[BP_LEVEL] value. Fixes: caa2da34 ("octeontx2-pf: Initialize and config queues") Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Link: https://lore.kernel.org/r/20220802142813.25031-1-naveenm@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Subbaraya Sundeep says: ==================== Octeontx2 AF driver fixes for NPC This patchset includes AF driver fixes wrt packet parser NPC. Following are the changes: Patch 1: The parser nibble configuration must be same for TX and RX interfaces and if not fix up is applied. This fixup was applied only for default profile currently and it has been fixed to apply for all profiles. Patch 2: Firmware image may not be present all times in the kernel image and default profile is used mostly hence suppress the warning. Patch 3: This patch fixes a corner case where NIXLF is detached but without freeing its mcam entries which results in resource leak. Patch 4: SMAC is overlapped with DMAC mistakenly while installing rules based on SMAC. This patch fixes that. ==================== Link: https://lore.kernel.org/r/1659513255-28667-1-git-send-email-sbhatta@marvell.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Subbaraya Sundeep authored
Given a field with its location/offset in input packet, the key checking logic verifies whether extracting the field can be supported or not based on the mkex profile loaded in hardware. This logic is wrong wrt source mac and this patch fixes that. Fixes: 9b179a96 ("octeontx2-af: Generate key field bit mask from KEX profile") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Subbaraya Sundeep authored
The teardown sequence in FLR handler returns if no NIX LF is attached to PF/VF because it indicates that graceful shutdown of resources already happened. But there is a chance of all allocated MCAM entries not being freed by PF/VF. Hence free mcam entries even in case of detached LF. Fixes: c554f9c1 ("octeontx2-af: Teardown NPA, NIX LF upon receiving FLR") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Harman Kalra authored
The packet parser profile supplied as firmware may not be present all the time and default profile is used mostly. Hence suppress firmware loading warning from kernel due to absence of firmware in kernel image. Fixes: 3a724415 ("octeontx2-af: add support for custom KPU entries") Signed-off-by: Harman Kalra <hkalra@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Stanislaw Kardach authored
NPC_PARSE_NIBBLE for TX interface has to be equal to the RX one for some silicon revisions. Mistakenly this fixup was only applied to the default MKEX profile while it should also be applied to any loaded profile. Fixes: 1c1935c9 ("octeontx2-af: Add NIX1 interfaces to NPC") Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Nick Child authored
Add Nick Child as the maintainer of the IBM Power Virtual Ethernet Device Driver, replacing Cristobal Forno. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Link: https://lore.kernel.org/r/20220803155246.39582-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yang Li authored
bnxt_ethtool.h is included twice in bnxt_devlink.c, remove one of them. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1817Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220804003722.54088-1-yang.lee@linux.alibaba.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Florian Westphal says: ==================== netfilter followup fixes for net Regressions, since 5.19: Fix crash when packet tracing is enabled via 'meta nftrace set 1' rule. Also comes with a test case. Regressions, this cycle: Fix Kconfig dependency for the flowtable /proc interface, we want this to be off by default. ==================== Link: https://lore.kernel.org/r/20220804172629.29748-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pablo Neira Ayuso authored
Remove default to 'y', this infrastructure is not fundamental for the flowtable operational. Add a missing dependency on CONFIG_NF_FLOW_TABLE. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: b0381776 ("netfilter: nf_flow_table: count pending offload workqueue tasks") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Westphal authored
Enable/disable tracing infrastructure while packets are in-flight. This triggers KASAN splat after e34b9ed9 ("netfilter: nf_tables: avoid skb access on nf_stolen"). While at it, reduce script run time as well. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Westphal authored
do not access info->pkt when info->trace is not 1. nft_traceinfo is not initialized, except when tracing is enabled. The 'nft_trace_enabled' static key cannot be used for this, we must always check info->trace first. Pass nft_pktinfo directly to avoid this. Fixes: e34b9ed9 ("netfilter: nf_tables: avoid skb access on nf_stolen") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 05 Aug, 2022 6 commits
-
-
Cezar Bulinaru authored
Few test cases related to the fix for 924a9bc3: "net: check if protocol extracted by virtio_net_hdr_set_proto is correct" Need test for the case when a non-standard packet (GSO without NEEDS_CSUM) sent to the tap device causes a BUG check in the tap driver. Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cezar Bulinaru authored
Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Fixes: 924a9bc3 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct") Signed-off-by: Cezar Bulinaru <cbulinaru@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Fixes for mptcp cleanup/close and a selftest Patch 1 fixes an issue with leaking subflow sockets if there's a failure in a CGROUP_INET_SOCK_CREATE eBPF program. Patch 2 fixes a syzkaller-detected race at MPTCP socket close. Patch 3 is a fix for one mode of the mptcp_connect.sh selftest. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
When the selftest got added, sendfile() on mptcp sockets returned -EOPNOTSUPP, so running 'mptcp_connect.sh -m sendfile' failed immediately. This is no longer the case, but the script fails anyway due to timeout. Let the receiver know once the sender has sent all data, just like with '-m mmap' mode. v2: need to respect cfg_wait too, as pm_userspace.sh relied on -m sendfile to keep the connection open (Mat Martineau) Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Reported-by: Xiumei Mu <xmu@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Dipanjan reported a syzbot splat at close time: WARNING: CPU: 1 PID: 10818 at net/ipv4/af_inet.c:153 inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Modules linked in: uio_ivshmem(OE) uio(E) CPU: 1 PID: 10818 Comm: kworker/1:16 Tainted: G OE 5.19.0-rc6-g2eae0556bb9d #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:inet_sock_destruct+0x6d0/0x8e0 net/ipv4/af_inet.c:153 Code: 21 02 00 00 41 8b 9c 24 28 02 00 00 e9 07 ff ff ff e8 34 4d 91 f9 89 ee 4c 89 e7 e8 4a 47 60 ff e9 a6 fc ff ff e8 20 4d 91 f9 <0f> 0b e9 84 fe ff ff e8 14 4d 91 f9 0f 0b e9 d4 fd ff ff e8 08 4d RSP: 0018:ffffc9001b35fa78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002879d0 RCX: ffff8881326f3b00 RDX: 0000000000000000 RSI: ffff8881326f3b00 RDI: 0000000000000002 RBP: ffff888179662674 R08: ffffffff87e983a0 R09: 0000000000000000 R10: 0000000000000005 R11: 00000000000004ea R12: ffff888179662400 R13: ffff888179662428 R14: 0000000000000001 R15: ffff88817e38e258 FS: 0000000000000000(0000) GS:ffff8881f5f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007bc0 CR3: 0000000179592000 CR4: 0000000000150ee0 Call Trace: <TASK> __sk_destruct+0x4f/0x8e0 net/core/sock.c:2067 sk_destruct+0xbd/0xe0 net/core/sock.c:2112 __sk_free+0xef/0x3d0 net/core/sock.c:2123 sk_free+0x78/0xa0 net/core/sock.c:2134 sock_put include/net/sock.h:1927 [inline] __mptcp_close_ssk+0x50f/0x780 net/mptcp/protocol.c:2351 __mptcp_destroy_sock+0x332/0x760 net/mptcp/protocol.c:2828 mptcp_worker+0x5d2/0xc90 net/mptcp/protocol.c:2586 process_one_work+0x9cc/0x1650 kernel/workqueue.c:2289 worker_thread+0x623/0x1070 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> The root cause of the problem is that an mptcp-level (re)transmit can race with mptcp_close() and the packet scheduler checks the subflow state before acquiring the socket lock: we can try to (re)transmit on an already closed ssk. Fix the issue checking again the subflow socket status under the subflow socket lock protection. Additionally add the missing check for the fallback-to-tcp case. Fixes: d5f49190 ("mptcp: allow picking different xmit subflows") Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
If the mptcp socket creation fails due to a CGROUP_INET_SOCK_CREATE eBPF program, the MPTCP protocol ends-up leaking all the subflows: the related cleanup happens in __mptcp_destroy_sock() that is not invoked in such code path. Address the issue moving the subflow sockets cleanup in the mptcp_destroy_common() helper, which is invoked in every msk cleanup path. Additionally get rid of the intermediate list_splice_init step, which is an unneeded relic from the past. The issue is present since before the reported root cause commit, but any attempt to backport the fix before that hash will require a complete rewrite. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Reported-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Co-developed-by: Nguyen Dinh Phi <phind.uet@gmail.com> Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Aug, 2022 7 commits
-
-
Yu Xiao authored
The port flag isn't set to `NFP_PORT_CHANGED` when using `ethtool -m DEVNAME` before, so the port state (e.g. interface) cannot be updated. Therefore, it caused that `ethtool -m DEVNAME` sometimes cannot read the correct information. E.g. `ethtool -m DEVNAME` cannot work when load driver before plug in optical module, as the port interface is still NONE without port update. Now update the port state before sending info to NIC to ensure that port interface is correct (latest state). Fixes: 61f7c6f4 ("nfp: implement ethtool get module EEPROM") Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
Calling mdio_bus_phy_resume() with neither the PHY state machine set to PHY_HALTED nor phydev->mac_managed_pm set to true is a good indication that we can produce a race condition looking like this: CPU0 CPU1 bcmgenet_resume -> phy_resume -> phy_init_hw -> phy_start -> phy_resume phy_start_aneg() mdio_bus_phy_resume -> phy_resume -> phy_write(..., BMCR_RESET) -> usleep() -> phy_read() with the phy_resume() function triggering a PHY behavior that might have to be worked around with (see bf8bfc43 ("net: phy: broadcom: Fix brcm_fet_config_init()") for instance) that ultimately leads to an error reading from the PHY. Fixes: fba863b8 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220801233403.258871-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Make DSA work with bonding's ARP monitor Since commit 2b86cb82 ("net: dsa: declare lockless TX feature for slave ports") in v5.7, DSA breaks the ARP monitoring logic from the bonding driver, fact which was pointed out by Brian Hutchinson who uses a linux-5.10.y stable kernel. Initially I got lured by other similar hacks introduced for other NETIF_F_LLTX drivers, which, inspired by the bonding documentation, update the trans_start of their TX queues by hand. However Jakub pointed out that this simply isn't a proper solution, and after coming to think more about it, I agree, and it doesn't work properly with DSA nor is it maintainable for the future changes I plan for it (multiple DSA masters in a LAG). I've tested these changes using a DSA-based setup and a veth-based setup, using the active-backup mode and ARP monitoring, with and without arp_validate. Link to v1: https://patchwork.kernel.org/project/netdevbpf/patch/20220715232641.952532-1-vladimir.oltean@nxp.com/ Link to v2: https://patchwork.kernel.org/project/netdevbpf/patch/20220727152000.3616086-1-vladimir.oltean@nxp.com/ ==================== Link: https://lore.kernel.org/r/20220731124108.2810233-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
ARP monitoring no longer depends on dev->last_rx or dev_trans_start(), so delete this information. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
This reverts commit e66e257a. The veth driver no longer needs these hacks which are slightly detrimential to the fast path performance, because the bonding driver is keeping track of TX times of ARP and NS probes by itself, which it should. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Now that the bonding driver keeps track of the last TX time of ARP and NS probes, we effectively revert the following commits: 32d3e51a ("net_sched: use macvlan real dev trans_start in dev_trans_start()") 07ce76aa ("net_sched: make dev_trans_start return vlan's real dev trans_start") Note that the approach of continuing to hack at this function would not get us very far, hence the desire to take a different approach. DSA is also a virtual device that uses NETIF_F_LLTX, but there, many uppers share the same lower (DSA master, i.e. the physical host port of a switch). By making dev_trans_start() on a DSA interface return the dev_trans_start() of the master, we effectively assume that all other DSA interfaces are silent, otherwise this corrupts the validity of the probe timestamp data from the bonding driver's perspective. Furthermore, the hacks didn't take into consideration the fact that the lower interface of @dev may not have been physical either. For example, VLAN over VLAN, or DSA with 2 masters in a LAG. And even furthermore, there are NETIF_F_LLTX devices which are not stacked, like veth. The hack here would not work with those, because it would not have to provide the bonding driver something to chew at all. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
The bonding driver piggybacks on time stamps kept by the network stack for the purpose of the netdev TX watchdog, and this is problematic because it does not work with NETIF_F_LLTX devices. It is hard to say why the driver looks at dev_trans_start() of the slave->dev, considering that this is updated even by non-ARP/NS probes sent by us, and even by traffic not sent by us at all (for example PTP on physical slave devices). ARP monitoring in active-backup mode appears to still work even if we track only the last TX time of actual ARP probes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 03 Aug, 2022 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking changes from Paolo Abeni: "Core: - Refactor the forward memory allocation to better cope with memory pressure with many open sockets, moving from a per socket cache to a per-CPU one - Replace rwlocks with RCU for better fairness in ping, raw sockets and IP multicast router. - Network-side support for IO uring zero-copy send. - A few skb drop reason improvements, including codegen the source file with string mapping instead of using macro magic. - Rename reference tracking helpers to a more consistent netdev_* schema. - Adapt u64_stats_t type to address load/store tearing issues. - Refine debug helper usage to reduce the log noise caused by bots. BPF: - Improve socket map performance, avoiding skb cloning on read operation. - Add support for 64 bits enum, to match types exposed by kernel. - Introduce support for sleepable uprobes program. - Introduce support for enum textual representation in libbpf. - New helpers to implement synproxy with eBPF/XDP. - Improve loop performances, inlining indirect calls when possible. - Removed all the deprecated libbpf APIs. - Implement new eBPF-based LSM flavor. - Add type match support, which allow accurate queries to the eBPF used types. - A few TCP congetsion control framework usability improvements. - Add new infrastructure to manipulate CT entries via eBPF programs. - Allow for livepatch (KLP) and BPF trampolines to attach to the same kernel function. Protocols: - Introduce per network namespace lookup tables for unix sockets, increasing scalability and reducing contention. - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support. - Add support to forciby close TIME_WAIT TCP sockets via user-space tools. - Significant performance improvement for the TLS 1.3 receive path, both for zero-copy and not-zero-copy. - Support for changing the initial MTPCP subflow priority/backup status - Introduce virtually contingus buffers for sockets over RDMA, to cope better with memory pressure. - Extend CAN ethtool support with timestamping capabilities - Refactor CAN build infrastructure to allow building only the needed features. Driver API: - Remove devlink mutex to allow parallel commands on multiple links. - Add support for pause stats in distributed switch. - Implement devlink helpers to query and flash line cards. - New helper for phy mode to register conversion. New hardware / drivers: - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro. - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch. - Ethernet DSA driver for the Microchip LAN937x switch. - Ethernet PHY driver for the Aquantia AQR113C EPHY. - CAN driver for the OBD-II ELM327 interface. - CAN driver for RZ/N1 SJA1000 CAN controller. - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device. Drivers: - Intel Ethernet NICs: - i40e: add support for vlan pruning - i40e: add support for XDP framented packets - ice: improved vlan offload support - ice: add support for PPPoE offload - Mellanox Ethernet (mlx5) - refactor packet steering offload for performance and scalability - extend support for TC offload - refactor devlink code to clean-up the locking schema - support stacked vlans for bridge offloads - use TLS objects pool to improve connection rate - Netronome Ethernet NICs (nfp): - extend support for IPv6 fields mangling offload - add support for vepa mode in HW bridge - better support for virtio data path acceleration (VDPA) - enable TSO by default - Microsoft vNIC driver (mana) - add support for XDP redirect - Others Ethernet drivers: - bonding: add per-port priority support - microchip lan743x: extend phy support - Fungible funeth: support UDP segmentation offload and XDP xmit - Solarflare EF100: add support for virtual function representors - MediaTek SoC: add XDP support - Mellanox Ethernet/IB switch (mlxsw): - dropped support for unreleased H/W (XM router). - improved stats accuracy - unified bridge model coversion improving scalability (parts 1-6) - support for PTP in Spectrum-2 asics - Broadcom PHYs - add PTP support for BCM54210E - add support for the BCM53128 internal PHY - Marvell Ethernet switches (prestera): - implement support for multicast forwarding offload - Embedded Ethernet switches: - refactor OcteonTx MAC filter for better scalability - improve TC H/W offload for the Felix driver - refactor the Microchip ksz8 and ksz9477 drivers to share the probe code (parts 1, 2), add support for phylink mac configuration - Other WiFi: - Microchip wilc1000: diable WEP support and enable WPA3 - Atheros ath10k: encapsulation offload support Old code removal: - Neterion vxge ethernet driver: this is untouched since more than 10 years" * tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits) doc: sfp-phylink: Fix a broken reference wireguard: selftests: support UML wireguard: allowedips: don't corrupt stack when detecting overflow wireguard: selftests: update config fragments wireguard: ratelimiter: use hrtimer in selftest net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ net: usb: ax88179_178a: Bind only to vendor-specific interface selftests: net: fix IOAM test skip return code net: usb: make USB_RTL8153_ECM non user configurable net: marvell: prestera: remove reduntant code octeontx2-pf: Reduce minimum mtu size to 60 net: devlink: Fix missing mutex_unlock() call net/tls: Remove redundant workqueue flush before destroy net: txgbe: Fix an error handling path in txgbe_probe() net: dsa: Fix spelling mistakes and cleanup code Documentation: devlink: add add devlink-selftests to the table of contents dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock net: ionic: fix error check for vlan flags in ionic_set_nic_features() net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr() nfp: flower: add support for tunnel offload without key ID ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA updates from Damien Le Moal: - Some code refactoring for the pata_hpt37x and pata_hpt3x2n drivers, from Sergei. - Several patches to cleanup in libata-core, libata-scsi and libata-eh code: fixes arguments and variables types, change some functions declaration to static and fix for a typo in a comment. From Sergey and Xiang. - Fix a compilation warning in the pata_macio driver, from me. - A fix for the expected number of resources in the sata_mv driver fix, from Andrew. * tag 'ata-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: sata_mv: Fixes expected number of resources now IRQs are gone ata: libata-scsi: fix result type of ata_ioc32() ata: pata_macio: Fix compilation warning ata: libata-eh: fix sloppy result type of ata_internal_cmd_timeout() ata: libata-core: fix sloppy parameter type in ata_exec_internal[_sg]() ata: make ata_port::fastdrain_cnt *unsigned int* ata: libata-eh: fix sloppy result type of ata_eh_nr_in_flight() ata: libata-core: make ata_exec_internal_sg() *static* ata: make transfer mode masks *unsigned int* ata: libata-core: get rid of *else* branches in ata_id_n_sectors() ata: libata-core: fix sloppy typing in ata_id_n_sectors() ata: pata_hpt3x2n: pass base DPLL frequency to hpt3x2n_pci_clock() ata: pata_hpt37x: merge hpt374_read_freq() to hpt37x_pci_clock() ata: pata_hpt37x: factor out hpt37x_pci_clock() ata: pata_hpt37x: move claculating PCI clock from hpt37x_clock_slot() ata: libata: Fix syntax errors in comments
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs update from Damien Le Moal: "A single change for this cycle to simplify handling of the memory page used as super block buffer during mount (from Fabio)" * tag 'zonefs-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Call page_address() on page acquired with GFP_KERNEL flag
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull iomap updates from Darrick Wong: "The most notable change in this first batch is that we no longer schedule pages beyond i_size for writeback, preferring instead to let truncate deal with those pages. Next week, there may be a second pull request to remove iomap_writepage from the other two filesystems (gfs2/zonefs) that use iomap for buffered IO. This follows in the same vein as the recent removal of writepage from XFS, since it hasn't been triggered in a few years; it does nothing during direct reclaim; and as far as the people who examined the patchset can tell, it's moving the codebase in the right direction. However, as it was a late addition to for-next, I'm holding off on that section for another week of testing to see if anyone can come up with a solid reason for holding off in the meantime. Summary: - Skip writeback for pages that are completely beyond EOF - Minor code cleanups" * tag 'iomap-5.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: dax: set did_zero to true when zeroing successfully iomap: set did_zero to true when zeroing successfully iomap: skip pages past eof in iomap_do_writepage()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull affs fix from David Sterba: "One update to AFFS, switching away from the kmap/kmap_atomic API" * tag 'affs-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: use memcpy_to_page and remove replace kmap_atomic()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This brings some long awaited changes, the send protocol bump, otherwise lots of small improvements and fixes. The main core part is reworking bio handling, cleaning up the submission and endio and improving error handling. There are some changes outside of btrfs adding helpers or updating API, listed at the end of the changelog. Features: - sysfs: - export chunk size, in debug mode add tunable for setting its size - show zoned among features (was only in debug mode) - show commit stats (number, last/max/total duration) - send protocol updated to 2 - new commands: - ability write larger data chunks than 64K - send raw compressed extents (uses the encoded data ioctls), ie. no decompression on send side, no compression needed on receive side if supported - send 'otime' (inode creation time) among other timestamps - send file attributes (a.k.a file flags and xflags) - this is first version bump, backward compatibility on send and receive side is provided - there are still some known and wanted commands that will be implemented in the near future, another version bump will be needed, however we want to minimize that to avoid causing usability issues - print checksum type and implementation at mount time - don't print some messages at mount (mentioned as people asked about it), we want to print messages namely for new features so let's make some space for that - big metadata - this has been supported for a long time and is not a feature that's worth mentioning - skinny metadata - same reason, set by default by mkfs Performance improvements: - reduced amount of reserved metadata for delayed items - when inserted items can be batched into one leaf - when deleting batched directory index items - when deleting delayed items used for deletion - overall improved count of files/sec, decreased subvolume lock contention - metadata item access bounds checker micro-optimized, with a few percent of improved runtime for metadata-heavy operations - increase direct io limit for read to 256 sectors, improved throughput by 3x on sample workload Notable fixes: - raid56 - reduce parity writes, skip sectors of stripe when there are no data updates - restore reading from on-disk data instead of using stripe cache, this reduces chances to damage correct data due to RMW cycle - refuse to replay log with unknown incompat read-only feature bit set - zoned - fix page locking when COW fails in the middle of allocation - improved tracking of active zones, ZNS drives may limit the number and there are ENOSPC errors due to that limit and not actual lack of space - adjust maximum extent size for zone append so it does not cause late ENOSPC due to underreservation - mirror reading error messages show the mirror number - don't fallback to buffered IO for NOWAIT direct IO writes, we don't have the NOWAIT semantics for buffered io yet - send, fix sending link commands for existing file paths when there are deleted and created hardlinks for same files - repair all mirrors for profiles with more than 1 copy (raid1c34) - fix repair of compressed extents, unify where error detection and repair happen Core changes: - bio completion cleanups - don't double defer compression bios - simplify endio workqueues - add more data to btrfs_bio to avoid allocation for read requests - rework bio error handling so it's same what block layer does, the submission works and errors are consumed in endio - when asynchronous bio offload fails fall back to synchronous checksum calculation to avoid errors under writeback or memory pressure - new trace points - raid56 events - ordered extent operations - super block log_root_transid deprecated (never used) - mixed_backref and big_metadata sysfs feature files removed, they've been default for sufficiently long time, there are no known users and mixed_backref could be confused with mixed_groups Non-btrfs changes, API updates: - minor highmem API update to cover const arguments - switch all kmap/kmap_atomic to kmap_local - remove redundant flush_dcache_page() - address_space_operations::writepage callback removed - add bdev_max_segments() helper" * tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits) btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read btrfs: fix repair of compressed extents btrfs: remove the start argument to check_data_csum and export btrfs: pass a btrfs_bio to btrfs_repair_one_sector btrfs: simplify the pending I/O counting in struct compressed_bio btrfs: repair all known bad mirrors btrfs: merge btrfs_dev_stat_print_on_error with its only caller btrfs: join running log transaction when logging new name btrfs: simplify error handling in btrfs_lookup_dentry btrfs: send: always use the rbtree based inode ref management infrastructure btrfs: send: fix sending link commands for existing file paths btrfs: send: introduce recorded_ref_alloc and recorded_ref_free btrfs: zoned: wait until zone is finished when allocation didn't progress btrfs: zoned: write out partially allocated region btrfs: zoned: activate necessary block group btrfs: zoned: activate metadata block group on flush_space btrfs: zoned: disable metadata overcommit for zoned btrfs: zoned: introduce space_info->active_total_bytes btrfs: zoned: finish least available block group on data bg allocation btrfs: let can_allocate_chunk return error ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull efivars sysfs interface removal from Ard Biesheuvel: "Remove the obsolete 'efivars' sysfs based interface to the EFI variable store, now that all users have moved to the efivarfs pseudo file system, which was created ~10 years ago to address some fundamental shortcomings in the sysfs based driver. Move the 'business logic' related to which EFI variables are important and may affect the boot flow from the efivars support layer into the efivarfs pseudo file system, so it is no longer exposed to other parts of the kernel" * tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: vars: Move efivar caching layer into efivarfs efi: vars: Switch to new wrapper layer efi: vars: Remove deprecated 'efivars' sysfs interface
-