The init_board_info() function only gets the irq number from the
pci_dev. Just move the code into the function that calls it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the irq variable provided in the comedi_device to save the
irq number and remove it from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ao context is a struct containing all the register addresses
used with the ao subdevice. These can easily be calculated when
needed. Remove the me4000_ao_context struct, its initialization
function, and it's variable in the private data.

The last value written to the ao channels still needs to be saved
in the private data for readback.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These values are never used. Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This value is read from the pci config space but it is never used.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This value is read from the pci config space but it is never used.
Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ai context is a struct containing all the register addresses
used with the ai subdevice. These can easily be calculated when
needed. Remove the me4000_ai_context struct, its intialization
function, and it's variable in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dio context is a struct containing all the register addresses
used with the dio subdevice. These can easily be calculated when
needed. Remove the me4000_dio_context struct, its intialization
function, and it's variable in the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the iobase variable provided in the comedi_device for the
main base address used in the driver. Remove the me4000_regbase
variable from the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The me4000_probe() function has a bunch of error messages that
are displayed when various parts of the probe fail. These are
just added noise. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The get_registers() function reads the pci base addresses used
in the driver. It's simple enough, just move the code into the
function that calls it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the error messages about the pci base address not being
available. They are just noise.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to get the resource size for each pci bar. Nothing
in the driver uses it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The me4000_cnt_contect simply holds the unsigned long i/o addresses
used to read/write the counter registers. Thes can be calculated
as needed. Remove the struct and the associated field in the
private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the pci vendor/device ids from the header to the c file and
actually use them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move the struct me4000_board definition from the header to the c file.
It's not used by any other source.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro relies on a local variable having a specific name.
Remove it and use the comedi_board() helper to get the pointer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The me4000_ao_info in the boardinfo struct is used to indicate
the number of analog output channels and a couple other details
about them. Remove the extra struct and absorb the data into the
boardinfo struct.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The me4000_aio_info in the boardinfo struct is used to indicate
the number of analog input channels and a couple other details
about them. Remove the extra struct and absorb the data into the
boardinfo struct.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The me4000_dio_info in the boardinfo struct is used to indicate
the number of 8 bit dio ports the the board has. Add a 'dio_nchan'
field to struct me4000_board and remove the struct me4000_dio_info.
The 'dio_nchan' value can then be used directly in the attach of
the board when setting the subdevice number of channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The me4000_cnt_info in the boardinfo struct is used to indicate
that the board has an 8254 counter. Add a 'has_counter' field
to struct me4000_board and remove the struct me4000_cnt_info.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove all the boardinfo data that is set to '0'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the boardinfo initialization to C99 format to make it
less error prone and easier to maintain.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the terminating entry in the boardinfo so that ARRAY_SIZE
works correctly. Then remove ME4000_BOARD_VERSIONS and just use
ARRAY_SIZE in the probe.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

~0 can not be casted to u8.  Instead of using the IPACK_ANY_ID for the format
field we introduce a new IPACK_ANY_FORMAT specifically for that field and
defined as 0xff.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do so by depending on HAS_IOMEM.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jens Taprogge <jens.taprogge@taprogge.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc complains about some potentially uninitalized variables here, yet it
can not happen, due to an enumerated type (either the board is one type
or the other.)  Make the compiler happy by providing a default case
option that makes the logic a bit simpler for it to determine that there
really isn't a problem here.

Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB autosuspend suspends vhci_hcd. In this process hcd_bus_suspend gets
executed which puts vhci_hcd in suspend state and calls vhci_hub_status.
vhci_hub_status function checks hub state and if it is in suspend state,
usb_hcd_resume_root_hub gets executed which resumes hub and if hub is
idle, again autosuspend puts it in suspend state and this goes on.

vhci_hub_status should resume hub only when hub port is in suspend state
and hub port status has changed.
Signed-off-by: navin patidar <navinp@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Almost all of usbip assumes that the_controller->lock is acquired
before vdev->priv_lock. The exception is in
vhci_device_unlink_cleanup(), where locks are acquired in the
reverse order. This leads to occasional deadlocks.

Fixing this is a bit fiddly, as the_controller->lock can't be held
when calling usb_hcd_unlink_urb_from_ep() in the middle of the list
traversal. As I can't rule out concurrent callers to this function
(perhaps it is safe?), the code here becomes slightly uglier - when
locks are dropped in the middle so the list may have emptied itself
(not even list_for_each_entry_safe is safe here).
Signed-off-by: Bernard Blackham <b-linuxgit@largestprime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using list_move() instead of list_del() + list_add().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using list_move() instead of list_del() + list_add().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If "pool_id" is negative then it leads to a read before the start of the
array.  If "cli_id" is out of bounds then it leads to a NULL dereference
of "cli".  GCC would have warned about that bug except that we
initialized the warning message away.

Also it's better to put the parameter names into the function
declaration in the .h file.  It serves as a kind of documentation.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the comedi_subdevice access from pointer math to array
access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>