- 04 Apr, 2013 15 commits
-
-
Sylwester Nawrocki authored
Currently the whole driver depends on MFD_SYSCON, which in turn depends on OF. To allow to use the driver on non-dt platforms (S5PV210) the SYSREG support is made conditional (it is needed only for dt enabled platforms) and MFD_SYSCON is selected if OF is enabled, instead of depending on OF. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Arnd Bergmann authored
In multiplatform configurations, we cannot include headers provided by only the exynos platform. Fortunately a number of drivers that include those headers do not actually need them, so we can just remove the inclusions. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
struct dev_pm_ops should be const. Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Silences the following checkpatch warning: WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline WARNING: please, no space before tabs Signed-off-by:
-
Sachin Kamat authored
Fixes the following checkpatch warnings: WARNING: unnecessary whitespace before a quoted newline WARNING: please, no space before tabs Signed-off-by:
-
Tushar Behera authored
Checking '< 0' for unsigned variables always returns false. For error codes, use IS_ERR_VALUE() instead. Signed-off-by:
Tushar Behera <tushar.behera@linaro.org> Signed-off-by:
-
Phil Edworthy authored
Based on work done by Katsuya Matsubara. Signed-off-by:
Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by:
-
Fabio Porcedda authored
The commit 39793c69 "[media] mx2_camera: Convert it to platform driver" used module_platform_driver() to make code smaller, but since the driver used platform_driver_probe is more appropriate to use module_platform_driver_probe(). Signed-off-by:
Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by:
-
Fabio Porcedda authored
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by:
-
Guennadi Liakhovetski authored
To protect against open() racing with rmmod, hold the list_lock also while obtaining a reference to the camera host driver and check that the video device hasn't been unregistered yet. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Dan Carpenter: FYI, there are new smatch warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: da17d7bda957ae4697b6abc0793f74fb9b50b58f commit: 4c3bdb5e [media] siano: better debug send/receive messages drivers/media/common/siano/smscoreapi.c:396 smscore_translate_msg() error: buffer overflow 'siano_msgs' 401 <= 401 While it is almost impossible for this error to happen in practice, as it would require the siano's firmware to return an special invalid answer to a message request, fixing it is trivial. So, let's do it. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 01 Apr, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 3.9-rc5 * tag 'v3.9-rc5': (1080 commits) Linux 3.9-rc5 Revert "lockdep: check that no locks held at freeze time" dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function PNP: List Rafael Wysocki as a maintainer rbd: don't zero-fill non-image object requests ia64 idle: delete stale (*idle)() function pointer Btrfs: don't drop path when printing out tree errors in scrub target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit Revert "mm: introduce VM_POPULATE flag to better deal with racy userspace programs" usb: ftdi_sio: Add support for Mitsubishi FX-USB-AW/-BD mg_disk: fix error return code in mg_probe() Btrfs: fix wrong return value of btrfs_lookup_csum() Btrfs: fix wrong reservation of csums Btrfs: fix double free in the btrfs_qgroup_account_ref() Btrfs: limit the global reserve to 512mb Btrfs: hold the ordered operations mutex when waiting on ordered extents Btrfs: fix space accounting for unlink and rename Btrfs: fix space leak when we fail to reserve metadata space ...
-
- 31 Mar, 2013 24 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ... -
Paul Walmsley authored
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by:
Paul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hans Verkuil authored
radio-si476x depends on SND and SND_SOC, the mfd driver should select REGMAP_I2C. Also fix a small compile warning in a debug message: drivers/mfd/si476x-i2c.c: In function ‘si476x_core_drain_rds_fifo’: drivers/mfd/si476x-i2c.c:391:4: warning: field width specifier ‘*’ expects argument of type ‘int’, but argument 4 has type ‘long unsigned int’ [-Wformat] Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jean Delvare authored
drivers/media/usb/dvb-usb/m920x.c:91:6: warning: "ret" may be used uninitialized in this function [-Wuninitialized] drivers/media/usb/dvb-usb/m920x.c:70:6: note: "ret" was declared here This is real, if a remote control has an empty initialization sequence we would get success or failure randomly. OTOH the initialization of ret in m920x_init is needless, the function returns with an error as soon as an error happens, so the last return can only be a success and we can hard-code 0 there. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Hans Verkuil authored
em28xx: fix typo in scale_to_size(). The second hscale should be vscale. This bug caused xawtv to fail because it cannot find a workable image size. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Sylwester Nawrocki authored
The s5p-fimc directory now contains drivers for multiple IP blocks found in multiple Samsung application processors. This includes FIMC (CAMIF), MIPI CSIS and FIMC LITE. FIMC-IS (Imaging Subsystem) driver is going to be put into same directory. Hence we rename it to exynos4-is as s5p-fimc was only relevant for early version of this driver, when it only supported FIMC IP block. The imaging subsystem drivers for Exynos4 SoC series and S5PV210 will be included in drivers/media/platform/exynos4-is directory, with some modules shared with exynos5 series, while the rest of exynos5 specific modules will find their home in drivers/media/platform/exynos5-is. Signed-off-by:
-
Sylwester Nawrocki authored
Drop fimc-lite.h header inclusion to make the exynos-fimc-lite module independent on other modules. Move struct fimc_fmt declaration to the driver's private headers as it is used in multiple modules. Reported-by:
Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Since the FIMC-IS firmware communicates with an image sensor directly through the ISP I2C bus controllers the sub-devices power supplies cannot be simply enabled from left to right or disabled from right to left along the processing pipeline. Thus a subdev index to call s_power() on is looked up from a table, rather than doing the op call based on increasing/decreasing indexes. Signed-off-by:
-
Sylwester Nawrocki authored
Since the FIMC-IS firmware communicates with an image sensor directly through the ISP I2C bus controllers data streaming cannot be simply enabled from left to right or disabled from right to left along the processing pipeline. Thus a subdev index to call s_stream() on is looked up from a table, rather than doing the op call based on increasing/decreasing indexes. Signed-off-by:
-
Sylwester Nawrocki authored
In configurations where FIMC-LITE is used to capture image signal from an external sensor only we need to ensure one of FIMC devices is in active power state and the "fimc" gate clock is enabled. Otherwise the CAMCLK clock output signal will be masked off preventing an external sensor's operation. This affect processing pipelines like: - sensor -> FIMC-LITE -> memory - sensor -> MIPI-CSIS -> FIMC-LITE -> memory Signed-off-by:
-
Sylwester Nawrocki authored
A second sink pad is added to each FIMC.N subdev that will be used to link it to the FIMC-IS-ISP subdev. Only V4L2_MBUS_FMT_YUV10_1X30 format is supported at this pad (FIMC_SD_PAD_SINK_FIFO). The routine checking for mismatch in the image formats at sides of the links is updated to account for the fact FIMC.X subdevs now have sink pads at the pad indexes 0, 1 and source pad at pad index 2. If link to FIMC.X pad 1 is activated we switch FIMC input data bus type to the ISP Writeback. Only a single active link to FIMC.X pad 0 or 1 will be allowed at any time. Signed-off-by:
-
Sylwester Nawrocki authored
This patch ads handling of clocks for the CAMBLK subsystem which is a glue logic for FIMC-IS or LCD controller and FIMC IP. Signed-off-by:
-
Sylwester Nawrocki authored
We cannot assume that the passed entity the fimc_pipeline_prepare() function is supposed to start the media graph traversal from will always have its sink pad at pad index 0. Find the starting media entity's sink pad by iterating over its all pads and checking the pad flags. This ensures proper handling of FIMC, FIMC-LITE and FIMC-IS-ISP subdevs that have more than one sink and one source pad. Signed-off-by:
-
Andrzej Hajda authored
set_stream error for pipelines is logged or reported to user space if possible. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a menu option to the V4L2_CID_EXPOSURE_METERING control for multi-zone metering. Signed-off-by:
-
Sylwester Nawrocki authored
Before the camera ports can be used the pinmux needs to be configured properly. This patch adds a function to set the camera ports pinctrl to a default state within the media driver's probe(). The camera port(s) are then configured for the video bus operation. Signed-off-by:
-
Sylwester Nawrocki authored
The sensor (I2C and/or SPI client) devices are instantiated by their corresponding control bus drivers. Since the I2C client's master clock is often provided by a video bus receiver (host interface) or other than I2C/SPI controller device, the drivers of those client devices are not accessing hardware in their driver's probe() callback. Instead, after enabling clock, the host driver calls back into a sub-device when it wants to activate them. This pattern is used by some in-tree drivers and this patch also uses it for DT case. This patch is intended as a first step for adding device tree support to the S5P/Exynos SoC camera drivers. The second one is adding support for asynchronous sub-devices registration and clock control from sub-device driver level. The bindings shall not change when asynchronous probing support is added. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds changes required for the main camera media device driver corresponding to the top level 'camera' device node. The drivers of devices corresponding to child nodes of the 'camera' node are looked up and and registered as sub-devices to the top level driver. The main driver's probing is deferred if any of the sub-device drivers is not yet initialized and ready. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds the device tree support for FIMC-LITE device driver. The bindings include compatible property for the Exynos5 SoC series, however the actual implementation for these SoCs will be added in a separate patch. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds device tree support for FIMC driver on S5PV210 and Exynos4 SoCs. The FIMC IP block's features and quirks encoded statically in the driver are now parsed from the device tree. Once all relevant platforms are converted to device tree based booting the FIMC variant data structures will all be removed from the driver. Signed-off-by:
-
Sylwester Nawrocki authored
This patch support for binding the driver to the MIPI-CSIS devices instantiated from device tree and parsing the SoC and board specific properties. The MIPI CSI-2 channel is determined by the value of reg property placed in csis' port subnode. Signed-off-by:
-
